evolis.prn

evolis.prn

Psync;1;0                           # **RESERVED COMMAND**
<HEADER>Psmgr;1                    # **RESERVED COMMAND**
Ppws;1537499426                    # **RESERVED COMMAND**
Pps;0;n                            # Printer status after reply.  (0=disable 1=enable);(n=force no persistent, 0=disable printer status extension;1=enable printer status extension)
Pcla;1                             # **RESERVED COMMAND**
Psid;2                             # **RESERVED COMMAND** Set current session identification number
Pr;0;t                             # Read ribbon value (0=RIBBON_YMCKO);(t=Previous parameter is a number, not a string)
Pwres;300;300;0                    # Card resolution?
Psk;10                             # Monochrome print speed (10=fastest, 1=slowest)
Piqla;a;d                          # Print quality level adjust (a=activate adjustment, d=disable)
Pmc;h                              # ?????
Peoic;k;D                          # Ejection while card insertion (k=monochrome);(E=enable (default), D=disable)
Psync;2                            # **RESERVED COMMAND**
</HEADER>Psync;12;1                # **RESERVED COMMAND**
<OPTION Dpi=300x300>Psync;13;0     # **RESERVED COMMAND**
</OPTION>Psync;3;1                 # **RESERVED COMMAND**
<DOC Duplex=0>Psync;3;0            # **RESERVED COMMAND**
Psync;5;1                          # **RESERVED COMMAND**
<CARD>Psync;5;0                    # **RESERVED COMMAND**
Ss                                 # Start of sequence
Mr;s                               # Run motor direction (s=Syncronize to start position if not already)
Psync;9;1                          # **RESERVED COMMAND**
<FACE>Psync;9;0                    # **RESERVED COMMAND**
Sr                                 # Set card front-side for the downloading commands       
Pc;a;=;10                          # Set contrast (a=all colors);(= is "set");(10 is the value)
Pl;a;=;10                          # Set lumenosity (a=all colors);(= is "set");(10 is the value)
Pc;k;=;10                          # Set contrast (k=black);(= is "set");(10 is the value)
Pc;o;=;10                          # Set contrast (o=overlay);(= is "set");(10 is the value)
Pida;100;0;0;0                     # ????
<BINARY Size=82305>Db;o;2;.....    # Download binary data
</BINARY>Psync;10;1                # **RESERVED COMMAND**
</FACE>Psync;10;0                  # **RESERVED COMMAND**
Se                                 # End of sequence
Psync;6;1                          # **RESERVED COMMAND**
</CARD>Psync;6;0                   # **RESERVED COMMAND**
Psync;4;1                          # **RESERVED COMMAND**
</DOC>Psync;4;0                    # **RESERVED COMMAND**
Pcla;0                             # **RESERVED COMMAND**
Psid;0                             # **RESERVED COMMAND** Set current session identification number
Psync;11;1                         # **RESERVED COMMAND**
<END>Psync;11;0                    # **RESERVED COMMAND**