BUILD 10.2-20130814-EXPERIMENTAL-p1-MR2 GSM P1000 "Random" Reboot on Idle tablet: USB Debugging Enabled : Stay Awake=True . Battey State 1% after reboot and safe to assume low < 15% before reboot

proc_last_kmsg

[    0.039262] S5PC110 Hardware version : EVT1
[    0.039364] p1_get_hwrev: HWREV (0x12), Model (P1)
[    0.039444] HWREV is 0x12
[    0.040112] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.040196] pmstats at 5ffff000
[    0.040300] invalid media device
[    0.040443] invalid media device
[    0.040526] Universal :SD Detect configuration
[    0.041219] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.041751] S5PV210: Initializing architecture
[    0.042096] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[    0.042277] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
[    0.042457] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
[    0.042569] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
[    0.043409] print_constraints: pd_audio_supply: 5000 mV normal 
[    0.043682] print_constraints: pd_cam_supply: 5000 mV normal 
[    0.043871] print_constraints: pd_tv_supply: 5000 mV normal 
[    0.044112] print_constraints: pd_lcd_supply: 5000 mV normal 
[    0.044287] print_constraints: pd_g3d_supply: 5000 mV normal 
[    0.044545] print_constraints: pd_mfc_supply: 5000 mV normal 
[    0.051460] bio: create slab <bio-0> at 0
[    0.052251] SCSI subsystem initialized
[    0.052463] usbcore: registered new interface driver usbfs
[    0.052617] usbcore: registered new interface driver hub
[    0.052869] usbcore: registered new device driver usb
[    0.053422] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
[    0.053749] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
[    0.055136] Trying to set irq flags for IRQ339
[    0.055282] Trying to set irq flags for IRQ340
[    0.055361] Trying to set irq flags for IRQ341
[    0.055503] Trying to set irq flags for IRQ342
[    0.055583] Trying to set irq flags for IRQ343
[    0.055663] Trying to set irq flags for IRQ344
[    0.055807] Trying to set irq flags for IRQ345
[    0.055887] Trying to set irq flags for IRQ346
[    0.056030] Trying to set irq flags for IRQ347
[    0.056110] Trying to set irq flags for IRQ348
[    0.056189] Trying to set irq flags for IRQ349
[    0.056333] Trying to set irq flags for IRQ350
[    0.056412] Trying to set irq flags for IRQ351
[    0.056557] Trying to set irq flags for IRQ352
[    0.056638] Trying to set irq flags for IRQ353
[    0.056717] Trying to set irq flags for IRQ354
[    0.056861] Trying to set irq flags for IRQ355
[    0.056940] Trying to set irq flags for IRQ356
[    0.058167] print_constraints: VALIVE_1.2V: 1200 mV 
[    0.058896] print_constraints: VUSB_1.1V: 1100 mV 
[    0.059979] print_constraints: VADC_3.3V: 3300 mV 
[    0.060672] print_constraints: VTF_2.8V: 2800 mV 
[    0.061300] print_constraints: VUSB_3.3V: 3300 mV 
[    0.062927] print_constraints: VCC_2.8V_PDA: 2800 mV 
[    0.063575] print_constraints: CAM_IO_2.8V: 2800 mV 
[    0.064217] print_constraints: CAM_CIF_1.5V: 1500 mV 
[    0.064915] print_constraints: CAM_A_2.8V: 2800 mV 
[    0.065551] print_constraints: CAM_3M_1.2V: 1200 mV 
[    0.066262] print_constraints: CAM_AF_3.0V: 3000 mV 
[    0.066919] print_constraints: MOTOR_3.4V: 3400 mV 
[    0.068062] print_constraints: LVDS_VDD3.3V: 3300 mV 
[    0.068514] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1300 mV 
[    0.069040] print_constraints: VDD_INT: 750 <--> 1500 mV at 1150 mV 
[    0.070116] print_constraints: VCC_1.8V: 1800 mV 
[    0.070833] print_constraints: USB_VBUS_AP: 5000 mV 
[    0.071475] print_constraints: USB_VBUS_CP: 5000 mV 
[    0.071819] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
[    0.072051] i2c-gpio i2c-gpio.7: using pins 195 (SDA) and 191 (SCL)
[    0.072270] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
[    0.072466] i2c-gpio i2c-gpio.9: using pins 201 (SDA) and 200 (SCL)
[    0.072740] i2c-gpio i2c-gpio.11: using pins 188 (SDA) and 189 (SCL)
[    0.072941] i2c-gpio i2c-gpio.13: using pins 240 (SDA) and 241 (SCL)
[    0.073254] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL)
[    0.073529] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.073842] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.074077] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.074479] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.074957] Bluetooth: Core ver 2.16
[    0.075147] NET: Registered protocol family 31
[    0.075230] Bluetooth: HCI device and connection manager initialized
[    0.075379] Bluetooth: HCI socket layer initialized
[    0.075460] Bluetooth: L2CAP socket layer initialized
[    0.075622] Bluetooth: SCO socket layer initialized
[    0.076133] Switching to clocksource clock_source_systimer
[    0.078065] Switched to NOHz mode on CPU #0
[    0.078272] cfg80211: Calling CRDA to update world regulatory domain
[    0.090556] NET: Registered protocol family 2
[    0.090871] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.091504] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.091959] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.092254] TCP: Hash tables configured (established 16384 bind 16384)
[    0.092336] TCP reno registered
[    0.092419] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.092574] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.092986] NET: Registered protocol family 1
[    0.093310] RPC: Registered named UNIX socket transport module.
[    0.093395] RPC: Registered udp transport module.
[    0.093538] RPC: Registered tcp transport module.
[    0.093617] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.107795] PMU: registered new PMU device of type 0
[    0.108214] clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb)
[    0.267711] wake enabled for irq 165
[    0.267892] wake disabled for irq 165
[    0.268685] level device init
[    0.268869] sec_switch_probe : *** switch_sel (0x5)
[    0.269004] S5PV210 ADC driver, (c) 2010 Samsung Electronics
[    0.269327] [ JACK_DRIVER (sec_jack_init,650) ] 
[    0.269432] SEC JACK: Registering jack driver
[    0.269756] input: sec_jack as /devices/virtual/input/input0
[    0.269853] [ JACK_DRIVER (sec_jack_probe,508) ] registering switch_sendend switch_dev sysfs sec_jack
[    0.270205] [ JACK_DRIVER (sec_jack_probe,546) ] sended isr send=0X2c, ret =0
[    0.270355] wake enabled for irq 44
[    0.270436] wake disabled for irq 44
[    0.270529] [ JACK_DRIVER (sec_jack_probe,566) ] det isr det=0X28, ret =0
[    0.270676] wake enabled for irq 40
[    0.270761] EAR_MICBIAS Init
[    0.270855] [ JACK_DRIVER (jack_detect_change,175) ] 
[    0.271004] JACK dev detached 0 
[    0.271240] Loaded driver for PL330 DMAC-0 s3c-pl330
[    0.271387] 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[    0.271545] Loaded driver for PL330 DMAC-1 s3c-pl330
[    0.271728] 	DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.271883] Loaded driver for PL330 DMAC-2 s3c-pl330
[    0.272032] 	DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.272294] audit: initializing netlink socket (disabled)
[    0.272473] type=2000 audit(0.269:1): initialized
[    0.273284] ashmem: initialized
[    0.281276] Installing knfsd (copyright (C) 1996 [email protected]).
[    0.281965] NTFS driver 2.1.30 [Flags: R/W].
[    0.282424] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.282714] yaffs: yaffs built Aug 14 2013 08:36:07 Installing.
[    0.282822] msgmni has been set to 887
[    0.282969] SELinux:  Registering netfilter hooks
[    0.284619] io scheduler noop registered
[    0.284704] io scheduler deadline registered
[    0.284849] io scheduler row registered (default)
[    0.284995] io scheduler cfq registered
[    0.285176] cmc623_pwm Probe START!!!
[    0.285400] cmc623_pwm_bl cmc623_pwm_bl: cmc623_pwm backlight driver is enabled.
[    0.285482] cmc623_pwm Probe END!!!
[    0.285889] MDNIE  INIT ..........
[    0.285970] S3C MDNIE Driver, (c) 2010 Samsung Electronics
[    0.286064] MDNIE  INIT SUCCESS Addr : 0xf0034000
[    0.286208] IELCD  INIT ..........
[    0.286286] S3C IELCD Driver, (c) 2010 Samsung Electronics
[    0.286436] IELCD  INIT SUCCESS Addr : 0xf0040000
[    0.287406] s3cfb s3cfb: [fb2] dma: 0x4b398000, cpu: 0xf1000000, size: 0x01068000
[    0.307400] FIMD src sclk = 54000000
[    0.307499] s3cfb s3cfb: pixclock adjusted from 18522 to 37036
[    0.307583] [mDNIe] mDNIe_tuning_initialize: addr(0x84), data(0x0)  
[    0.307727] [mDNIe] mDNIe_tuning_initialize: addr(0x90), data(0x0)  
[    0.307873] [mDNIe] mDNIe_tuning_initialize: addr(0x94), data(0xfff)  
[    0.307954] [mDNIe] mDNIe_tuning_initialize: addr(0x98), data(0x5c)  
[    0.308099] [mDNIe] mDNIe_tuning_initialize: addr(0x9c), data(0x12)  
[    0.308180] [mDNIe] mDNIe_tuning_initialize: addr(0xac), data(0x0)  
[    0.308325] [mDNIe] mDNIe_tuning_initialize: addr(0xb4), data(0x3ff)  
[    0.308406] [mDNIe] mDNIe_Set_Mode: current_mDNIe_UI(0), current_mDNIe_OutDoor_OnOff(0)  
[    0.308596] s3cfb s3cfb: registered successfully
[    0.309464] lms700_probe::599->lms700 probed successfuly
[    0.309547] HWREV : 18
[    0.309795] lcd_adc : 0
[    0.309872] LCD_TYPE_VA
[    0.310016] LCD vendor: SMD VA70%
[    0.310247] sec_tune_cmc623_i2c 13-0038: cmc623 i2c probe success!!!
[    0.310332] cmc623_cabc_enable_flag(0)
[    0.319771] [cmc623] cmc623_Set_Mode: current_cmc623_UI(0), current_cmc623_CABC_OnOff(0)->(0) / OVE : 0 
[    0.320400] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[    0.330240] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[    0.341986] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[    0.356069] PA FB = 0x4B398000, bits per pixel = 32
[    0.356166] screen width=1024 height=600 va=0xdb398000 pa=0x4b398000
[    0.356313] xres_virtual = 1024, yres_virtual = 4200, xoffset = 0, yoffset = 0
[    0.356395] fb_size=17203200
[    0.356543] Back frameBuffer[0].VAddr=db5f0000 PAddr=4b5f0000 size=2457600
[    0.356628] Back frameBuffer[1].VAddr=db848000 PAddr=4b848000 size=2457600
[    0.356786] Video Y Buffer[0].VAddr=dbaa0000 PAddr=4baa0000 size=921600
[    0.356933] Video Y Buffer[1].VAddr=dbb81000 PAddr=4bb81000 size=921600
[    0.357016] Video Y Buffer[2].VAddr=dbc62000 PAddr=4bc62000 size=921600
[    0.357164] Video UV Buffer[0].VAddr=dbd43000 PAddr=4bd43000 size=462848
[    0.357247] Video UV Buffer[1].VAddr=dbdb4000 PAddr=4bdb4000 size=462848
[    0.357393] Video UV Buffer[2].VAddr=dbe25000 PAddr=4be25000 size=462848
[    0.361521] brd: module loaded
[    0.363535] loop: module loaded
[    0.363651] Android kernel panic handler initialized (bind=kpanic)
[    0.365135] wake enabled for irq 167
[    0.365632] fsa9480 7-0025: prev_dev1: 0x0, prev_dev2: 0x0
[    0.365717] fsa9480 7-0025: new_dev1: 0x40, new_dev2: 0x0
[    0.365901] i2c-core: driver [fsa9480] using legacy suspend method
[    0.365982] i2c-core: driver [fsa9480] using legacy resume method
[    0.366135] [modemctl_init]
[    0.366268] [modemctl_probe]
[    0.366490] modemctl xmm: PHONE ACTIVE: 0
[    0.366670] wake enabled for irq 47
[    0.366783] wake enabled for irq 171
[    0.366894] [onedram_init]
[    0.367073] [onedram_probe]
[    0.367526] wake enabled for irq 43
[    0.367737] [svnet_init]
[    0.369155] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
[    0.369355] sec_switch_get_regulator
[    0.369440] sec_switch_set_switch_status (switch_status : 5)
[    0.369586] sec_switch_init_work : initial usb_sel(1), uart_sel(0)
[    0.369667] sec_switch_set_regulator (mode : 0)
[    0.373198] OneNAND version = 0x013e
[    0.373280] Chip support all block unlock
[    0.373359] Chip has 4KiB pagesize
[    0.373501] Chip has cache program feature
[    0.373596] Scanning device for bad blocks
[    0.392714] fsa9480_manual_switching: path selected (0)
[    0.392866] fsa9480_manual_switching: AUTO_SWITCH (0)
[    2.091257] OneNAND eraseblock 2047 is an initial bad block
[    2.091407] Creating 6 MTD partitions on "(null)":
[    2.091494] 0x000001200000-0x000001980000 : "boot"
[    2.092287] 0x000001980000-0x000002100000 : "recovery"
[    2.093041] 0x000002100000-0x00001d280000 : "system"
[    2.094505] 0x00001d280000-0x00001e880000 : "radio"
[    2.095281] 0x00001e880000-0x00001f500000 : "efs"
[    2.095955] 0x00001f500000-0x000020000000 : "reservoir"
[    2.096752] PPP generic driver version 2.4.2
[    2.096944] PPP Deflate Compression module registered
[    2.097028] PPP BSD Compression module registered
[    2.097789] PPP MPPE Compression module registered
[    2.097874] NET: Registered protocol family 24
[    2.099264] tun: Universal TUN/TAP device driver, 1.6
[    2.099348] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    2.099662] usbcore: registered new interface driver cdc_acm
[    2.099784] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.099933] Initializing USB Mass Storage driver...
[    2.100071] usbcore: registered new interface driver usb-storage
[    2.100217] USB Mass Storage support registered.
[    2.100474] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
[    2.100482] s3c-udc : version 15 March 2009 (DMA Mode)
[    2.101777] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.101865] android_usb gadget: Number of LUNs=2
[    2.102013]  lun0: LUN: removable file: (no medium)
[    2.102094]  lun1: LUN: removable file: (no medium)
[    2.102359] android_usb gadget: android_usb ready
[    2.116417] Registered gadget driver 'android_usb'
[    2.116651] mousedev: PS/2 mouse device common for all mice
[    2.117280] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[    2.117661] usbcore: registered new interface driver xpad
[    2.117853] usbcore: registered new interface driver usb_acecad
[    2.117934] acecad: v3.2:USB Acecad Flair tablet driver
[    2.118120] usbcore: registered new interface driver aiptek
[    2.118201] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
[    2.118348] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
[    2.118546] usbcore: registered new interface driver gtco
[    2.118627] GTCO usb driver version: 2.00.0006
[    2.118747] usbcore: registered new interface driver hanwang
[    2.119002] usbcore: registered new interface driver kbtab
[    2.119082] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
[    2.119303] usbcore: registered new interface driver wacom
[    2.119385] wacom: v1.52:USB Wacom tablet driver
[    2.119745] input: AT42QT602240 Touchscreen as /devices/platform/s3c2440-i2c.2/i2c-2/2-004a/input/input2
[    2.121472] [TSP] F/W version    : 22
[    2.121554] [TSP] Family  ID     : 128
[    2.121632] [TSP] Variant ID     : 1
[    2.121774] [TSP] Build number   : 171
[    2.121854] [TSP] X size         : 18
[    2.121933] [TSP] Y size         : 12
[    2.392702] [TSP] Family ID: 128 Variant ID: 1 Version: 22 Build: 171
[    2.392792] [TSP] Matrix X Size: 18 Matrix Y Size: 12 Object Num: 17
[    2.392937] [TSP] Calibrating...
[    2.393606] [TSP] release_all_fingers
[    2.393716] [TSP] QT602240_Multitouch_Threshold_High
[    2.394796] [ak8973_probe] ak8973 started...
[    2.395548] i2c-core: driver [ak8973] using legacy suspend method
[    2.395697] i2c-core: driver [ak8973] using legacy resume method
[    2.396108] input: lightsensor-level as /devices/virtual/input/input3
[    2.396454] [bh1721_i2c_probe]: Light Sensor probe complete.
[    2.396600] [TSP] msg:0x90
[    2.396816] [TSP] release_all_fingers
[    2.396948] bma020_acc_init 
[    2.397292] bma020_accelerometer_probe 
[    2.397378] bma020_acc_start 
[    2.397674] [TSP] msg:0x0
[    2.397763] i2c_acc_bma020_init called 
[    2.397866] bma020_probe called 
[    2.398047] bma020_chip_init 
[    2.398641] chip_id=2
[    2.399602] bma020_chip_init bma020_chip_init ok~!!
[    2.401216] l3g4200d_init 
[    2.401362] L3G4200D init driver
[    2.401464] l3g4200d_probe : platform data ok!!
[    2.401544] l3g4200d_probe : i2c_check_functionality I2C_FUNC_I2C!!
[    2.401688] l3g4200d_probe : i2c_check_functionality I2C_FUNC_SMBUS_I2C_BLOCK!!
[    2.401833] l3g4200d_probe : kzalloc!!
[    2.401912] l3g4200d_probe : i2c_set_clientdata!!
[    2.401992] l3g4200d_probe : kmalloc!!
[    2.402136] l3g4200d_probe : memcpy!!
[    2.402215] l3g4200d_validate_pdata : check map!!
[    2.402293] l3g4200d_validate_pdata : check negate!!
[    2.402437] l3g4200d_probe : validate_pdata!!
[    2.402517] l3g4200d_probe : slave addr = 69
[    2.402791] l3g4200d_probe : L3G4200D Device detected!
[    2.403177] l3g4200d_probe : I2C driver registered!
[    2.403474] input: gyro as /devices/virtual/input/input4
[    2.403806] l3g4200d_probe : L3G4200D device created successfully
[    2.403889] l3g4200d_probe : L3G4200D device created successfully
[    2.404067] i2c-core: driver [l3g4200d] using legacy suspend method
[    2.404214] i2c-core: driver [l3g4200d] using legacy resume method
[    2.404656] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[    2.405554] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
[    2.405661] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
[    2.405814] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
[    2.405901] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
[    2.406245] using rtc device, s3c, for alarms
[    2.406348] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
[    2.406556] i2c /dev entries driver
[    2.407709] lirc_dev: IR Remote Control driver registered, major 249 
[    2.407795] IR NEC protocol handler initialized
[    2.407940] IR RC5(x) protocol handler initialized
[    2.408021] IR RC6 protocol handler initialized
[    2.408164] IR JVC protocol handler initialized
[    2.408243] IR Sony protocol handler initialized
[    2.408322] IR RC5 (streamzap) protocol handler initialized
[    2.408514] IR LIRC bridge handler initialized
[    2.408596] Linux video capture interface: v2.00
[    2.408900] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[    2.408907] 
[    2.409396] S3C JPEG Driver, (c) 2007 Samsung Electronics
[    2.409543] JPEG driver for S5PV210
[    2.409887] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[    2.410060] i2c-core: driver [s5p_ddc] using legacy suspend method
[    2.410142] i2c-core: driver [s5p_ddc] using legacy resume method
[    2.410294] S5P HPD Driver, (c) 2010 Samsung Electronics
[    2.410513] s5p_handle_cable....startmax17042 attach success!!!
[    2.436288] [TSP] msg:0x10
[    2.436377] [TSP] release_all_fingers
[    2.451043] [TSP] msg:0x0
[    2.516808] wake enabled for irq 46
[    2.519710] [FG_Model] 0xb110, 0xb610, 0xb7a0, 0xb980, 0xbb50, 0xbbb0, 0xbcd0, 0xbd20, 0xbd70, 0xbe10, 0xbed0, 0xc0e0, 0xc320, 0xc6d0, 0xcae0, 0xcf30, 0x02f0, 0x0830, 0x0cb0, 0x0a70, 0x1ef0, 0x0900, 0x33c0, 0x4980, 0x1a00, 0x0e30, 0x0a70, 0x0900, 0x0a70, 0x0740, 0x0770, 0x0770, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100, 0x0100
[    2.538866] smb136_i2c_probe : SMB136 Charger Driver Loading
[    2.539015] Smb136 charger attach success!!!
[    2.539608] smb136_get_charging_status : 0x36h(0x05), 0x39h(0x03)
[    2.539766] wake enabled for irq 41
[    2.540166] SMB136 addr : 0x00 data : 0xf4
[    2.540498] SMB136 addr : 0x01 data : 0xe6
[    2.540828] SMB136 addr : 0x02 data : 0xca
[    2.541257] SMB136 addr : 0x03 data : 0x8c
[    2.541589] SMB136 addr : 0x04 data : 0x28
[    2.541984] SMB136 addr : 0x05 data : 0x08
[    2.542313] SMB136 addr : 0x06 data : 0x28
[    2.542643] SMB136 addr : 0x07 data : 0x00
[    2.543036] SMB136 addr : 0x08 data : 0xd7
[    2.543366] SMB136 addr : 0x09 data : 0x4b
[    2.543696] SMB136 addr : 0x0a data : 0x40
[    2.544090] SMB136 addr : 0x0b data : 0x9b
[    2.544419] SMB136 addr : 0x31 data : 0x8c
[    2.544750] SMB136 addr : 0x32 data : 0x00
[    2.545076] smb136_irq_thread
[    2.545542] SMB136 addr : 0x00 data : 0xf4
[    2.545874] SMB136 addr : 0x01 data : 0xe6
[    2.546270] SMB136 addr : 0x02 data : 0xca
[    2.546600] SMB136 addr : 0x03 data : 0x8c
[    2.546929] SMB136 addr : 0x04 data : 0x28
[    2.547259] SMB136 addr : 0x05 data : 0x08
[    2.547595] SMB136 addr : 0x06 data : 0x28
[    2.547990] SMB136 addr : 0x07 data : 0x00
[    2.548320] SMB136 addr : 0x08 data : 0xd7
[    2.548649] SMB136 addr : 0x09 data : 0x4b
[    2.549075] SMB136 addr : 0x0a data : 0x40
[    2.549406] SMB136 addr : 0x0b data : 0x9b
[    2.549737] SMB136 addr : 0x31 data : 0x8c
[    2.550131] SMB136 addr : 0x32 data : 0x00
[    2.550461] SMB136 addr : 0x33 data : 0x64
[    2.550790] SMB136 addr : 0x34 data : 0x70
[    2.551185] SMB136 addr : 0x35 data : 0x00
[    2.551514] SMB136 addr : 0x36 data : 0x05
[    2.551909] SMB136 addr : 0x37 data : 0x00
[    2.552238] SMB136 addr : 0x38 data : 0x00
[    2.552567] SMB136 addr : 0x39 data : 0x03
[    2.552989] SMB136 addr : 0x3a data : 0x22
[    2.553319] SMB136 addr : 0x3b data : 0x0a
[    2.553648] SMB136 addr : 0x3c data : 0x00
[    2.553798] SMB136 addr : 0x33 data : 0x64
[    2.554130] SMB136 addr : 0x34 data : 0x70
[    2.554460] SMB136 addr : 0x35 data : 0x00
[    2.554854] SMB136 addr : 0x36 data : 0x05
[    2.555184] SMB136 addr : 0x37 data : 0x00
[    2.555513] SMB136 addr : 0x38 data : 0x00
[    2.555907] SMB136 addr : 0x39 data : 0x03
[    2.556238] SMB136 addr : 0x3a data : 0x22
[    2.556632] SMB136 addr : 0x3b data : 0x0a
[    2.556979] SMB136 addr : 0x3c data : 0x00
[    2.557166] max8998_charger_probe : MAX8998 Charger Driver Loading
[    2.559634] device-mapper: uevent: version 1.0.3
[    2.560001] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[    2.560259] Bluetooth: HCI UART driver ver 2.2
[    2.560343] Bluetooth: HCI H4 protocol initialized
[    2.560547] cpuidle: using governor ladder
[    2.560728] cpuidle: using governor menu
[    2.560844] sdhci: Secure Digital Host Controller Interface driver
[    2.560926] sdhci: Copyright(c) Pierre Ossman
[    2.561105] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[    2.561269] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
[    2.561491] mmc0: no vmmc regulator found
[    2.561734] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[    2.561933] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[    2.562031] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[    2.562214] mmc1: no vmmc regulator found
[    2.562401] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[    2.562754] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[    2.562852] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[    2.563035] mmc2: no vmmc regulator found
[    2.563223] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[    2.565623] usbcore: registered new interface driver usbhid
[    2.565708] usbhid: USB HID core driver
[    2.566157] logger: created 256K log 'log_main'
[    2.566305] logger: created 256K log 'log_events'
[    2.566512] logger: created 256K log 'log_radio'
[    2.566661] logger: created 256K log 'log_system'
[    2.566847] zram: num_devices not specified. Using default: 1
[    2.566993] zram: Creating 1 devices ...
[    2.596881] smdkc110_audio_init
[    2.597254] WM8994 Audio Codec 0.1
[    2.651384] wm8994_extensions: initializing driver v10
[    2.658537] s3c_idma_preallocate_buffer:  VA-f00c0000  PA-C0000000  163840bytes
[    2.658972] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
[    2.659393] ALSA device list:
[    2.659539]   #0: smdkc110
[    2.659790] oprofile: using arm/armv7
[    2.660131] GACT probability NOT on
[    2.660284] Mirror/redirect action on
[    2.660364] u32 classifier
[    2.660442]     Actions configured
[    2.660522] Netfilter messages via NETLINK v0.30.
[    2.660727] nf_conntrack version 0.5.0 (7096 buckets, 28384 max)
[    2.661560] ctnetlink v0.93: registering with nfnetlink.
[    2.661757] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    2.661841] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    2.662383] xt_time: kernel timezone is -0000
[    2.663947] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.664285] arp_tables: (C) 2002 David S. Miller
[    2.664418] TCP cubic registered
[    2.664499] Initializing XFRM netlink socket
[    2.665432] NET: Registered protocol family 10
[    2.670330] Mobile IPv6
[    2.670439] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.670843] IPv6 over IPv4 tunneling driver
[    2.675167] NET: Registered protocol family 17
[    2.675337] NET: Registered protocol family 15
[    2.675532] Bluetooth: RFCOMM TTY layer initialized
[    2.675624] Bluetooth: RFCOMM socket layer initialized
[    2.675770] Bluetooth: RFCOMM ver 1.11
[    2.675849] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.675995] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.676207] NET: Registered protocol family 35
[    2.676459] Registering the dns_resolver key type
[    2.676591] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[    2.676817] ThumbEE CPU extension supported.
[    2.677185] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
[    2.680316] [ CONNECTOR_DRIVER (acc_con_init,544) ] 
[    2.680452] [ CONNECTOR_DRIVER (acc_con_probe,449) ] 
[    2.680567] [ MHL_DRIVER (SII9234A_i2c_probe,237) ] 
[    2.680710] SII9234A attach success!!!
[    2.680838] [MHL SII9234A] add i2c driver
[    2.681012] [ MHL_DRIVER (SII9234B_i2c_probe,271) ] 
[    2.681091] SII9234B attach success!!!
[    2.681204] [MHL SII9234B] add i2c driver
[    2.681377] [ MHL_DRIVER (SII9234C_i2c_probe,306) ] 
[    2.681457] SII9234C attach success!!!
[    2.681571] [MHL SII9234C] add i2c driver
[    2.681763] [ MHL_DRIVER (SII9234_i2c_probe,188) ] 
[    2.681850] SII9234 attach success!!!
[    2.682032] [MHL SII9234] add i2c driver
[    2.682113] [ MHL_DRIVER (SII9234_GPIO_INIT,134) ] 
[    2.682195] [ MHL_DRIVER (SII9234_HW_Off,124) ] 
[    2.697659] wake enabled for irq 37
[    2.697743] wake enabled for irq 173
[    2.697912] ## wifi_probe
[    2.698058] wifi_set_power = 1
[    2.698164] [ CONNECTOR_DRIVER (acc_ID_intr_handle,364) ] GPIO_DOCK_INT is 1
[    2.698247] [ CONNECTOR_DRIVER (acc_ID_intr_handle,393) ] Ignored
[    2.904537] wifi_set_carddetect = 1
[    2.923067] mmc0: new high speed MMC card at address 0001
[    2.926231] mmcblk0: mmc0:0001 SEM16G 14.8 GiB 
[    2.927745] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB
[    2.929905] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB
[    2.935635]  mmcblk0: p1 p2 p3
[    2.946119]  mmcblk0boot1: unknown partition table
[    2.952283]  mmcblk0boot0: unknown partition table
[    2.954256] s3c-sdhci.2: ldo on
[    3.018156] mmc1: error -110 whilst initialising SD card
[    3.019262] s3c-sdhci.2: ldo down
[    3.021083] s3c-sdhci.2: ldo on
[    3.085743] mmc1: error -110 whilst initialising SD card
[    3.086971] s3c-sdhci.2: ldo down
[    3.088968] s3c-sdhci.2: ldo on
[    3.161618] mmc1: error -110 whilst initialising SD card
[    3.163166] s3c-sdhci.2: ldo down
[    3.165008] s3c-sdhci.2: ldo on
[    3.235818] mmc1: error -110 whilst initialising SD card
[    3.237355] s3c-sdhci.2: ldo down
[    3.300060] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.300798] mmc2: new SDIO card at address 0001
[    3.410526] alloc static buf at ef900000!
[    3.413686] F1 signature read @0x18000000=0x9934329
[    3.424099] DHD: dongle ram size is set to 294912(orig 294912)
[    3.429191] wl_create_event_handler thr:4e started
[    3.431275] dhd_attach thr:4f started
[    3.434307] dhd_attach thr:50 started
[    3.434989] dhd_attach thr:51 started
[    3.445351] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[    3.446213] 
[    3.446227] Dongle Host Driver, version 5.90.195.104
[    3.446248] Compiled in drivers/net/wireless/bcmdhd on Aug 14 2013 at 08:36:06
[    3.447323] wifi_set_power = 0
[    3.447698] =========== WLAN placed in RESET ========
[    3.449132] input: p1_keyboard as /devices/platform/p1_keyboard/input/input5
[    3.450158] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
[    3.450754] s3c-rtc s3c2410-rtc: setting system clock to 2013-08-18 18:22:04 UTC (1376850124)
[    3.453645] FIMC0 registered successfully
[    3.456840] FIMC1 registered successfully
[    3.458396] FIMC2 registered successfully
[    3.458754] S5P TVOUT Driver, (c) 2010 Samsung Electronics
[    3.459654] clk_get: could not find clock mout_vpll_src for dev s5p_device_tvout+0x8/0xd8 (s5p-tvout)
[    3.459936] failed to find clock "mout_vpll_src"
[    3.460234] s5p-tvout s5p-tvout: hpd status: cable removed/not connected
[    3.466526] s5p_tv_probe TV Probing is done
[    3.466832] sec_battery_probe : Samsung Battery Driver Loading
[    3.468562] check_UV_charging_case: current(839mA), vcell(3837mV), threshold(3442mV)
[    3.470626] sec_bat_set_cable : cable_type = 2 ( 0 : NONE, 1: USB, 2: TA) 
[    3.474726] p1_lpm_mode_check : VDCIN (1)
[    3.475139] Warning: unable to open an initial console.
[    3.476854] Freeing init memory: 4456K
[    3.482045] fsa9480_manual_switching: path selected (2)
[    3.482199] fsa9480_manual_switching: SWITCH_Audio_Port (2)
[    3.484724] check_samsung_charger: vol_1 = 1039, vol_2 = 1041!!
[    3.489570] check_samsung_charger: vol_1 = 1036, vol_2 = 1037!!
[    3.491711] check_samsung_charger: vol_1 = 1036, vol_2 = 1037!!
[    3.491858] check_samsung_charger: Samsung charger is connected!!!
[    3.492201] fsa9480_manual_switching: path selected (0)
[    3.492347] fsa9480_manual_switching: AUTO_SWITCH (0)
[    3.492804] smb136_charging : enable(1), cable_status(2)
[    3.504647] yaffs: dev is 32505858 name is "mtdblock2" rw
[    3.504722] yaffs: passed flags ""
[    3.504791] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
[    3.786915] yaffs: yaffs_read_super: is_checkpointed 1
[    3.804032] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    3.889698] SELinux: 512 avtab hash slots, 1642 rules.
[    3.890717] SELinux: 512 avtab hash slots, 1642 rules.
[    3.891019] SELinux:  1 users, 2 roles, 300 types, 13 bools, 1 sens, 1024 cats
[    3.891262] SELinux:  84 classes, 1642 rules
[    3.892713] SELinux:  Completing initialization.
[    3.892789] SELinux:  Setting up existing superblocks.
[    3.892931] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    3.893064] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    3.893269] SELinux: initialized (dev bdev, type bdev), not configured for labeling
[    3.893398] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    3.893487] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.893575] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    3.894582] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    3.894664] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    3.894789] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[    3.894920] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    3.895005] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    3.895158] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
[    3.895283] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.895428] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    3.929332] type=1403 audit(1376850124.976:2): policy loaded auid=4294967295 ses=4294967295
[    3.929627] SELinux: Loaded policy from (null)
[    4.078456] init: cannot open '/initlogo.rle'
[    4.079958] android_usb: already disabled
[    4.080645] init: Unable to open persistent property directory /data/property errno: 2
[    4.082452] android_usb: already disabled
[    4.085622] adb_open
[    4.085711] adb_bind_config
[    4.092836] android_work: did not send uevent (0 0   (null))
[    4.240097] fs_mgr: Warning: unknown flag lun=/sys/devices/platform/s3c-usbgadget/gadget/lun0/file
[    4.240300] fs_mgr: Warning: unknown flag lun=/sys/devices/platform/s3c-usbgadget/gadget/lun1/file
[    4.256917] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: 
[    4.257020] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
[    4.319785] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: 
[    4.319941] SELinux: initialized (dev mmcblk0p2, type ext4), uses xattr
[    4.338578] adb_release
[    4.338923] adb_open
[    4.339998] adb_bind_config
[    4.342675] adb_release
[    4.342929] init: untracked pid 122 exited
[    4.344251] adb_open
[    4.344392] adb_bind_config
[    4.350502] android_work: did not send uevent (0 0   (null))
[   17.917475] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
[   32.389287] smb136_irq_thread
[   32.390641] SMB136 addr : 0x00 data : 0xf4
[   32.392341] SMB136 addr : 0x01 data : 0xe5
[   32.393687] SMB136 addr : 0x02 data : 0xca
[   32.394954] SMB136 addr : 0x03 data : 0x8c
[   32.396794] SMB136 addr : 0x04 data : 0x28
[   32.398004] SMB136 addr : 0x05 data : 0x18
[   32.399193] SMB136 addr : 0x06 data : 0x2c
[   32.401022] SMB136 addr : 0x07 data : 0x00
[   32.402223] SMB136 addr : 0x08 data : 0xd7
[   32.403419] SMB136 addr : 0x09 data : 0x4b
[   32.405186] SMB136 addr : 0x0a data : 0x40
[   32.406386] SMB136 addr : 0x0b data : 0x9b
[   32.408073] SMB136 addr : 0x31 data : 0x00
[   32.411113] SMB136 addr : 0x32 data : 0x00
[   32.411806] SMB136 addr : 0x33 data : 0x45
[   32.412792] SMB136 addr : 0x34 data : 0x70
[   32.413480] SMB136 addr : 0x35 data : 0x40
[   32.414164] SMB136 addr : 0x36 data : 0x31
[   32.415081] SMB136 addr : 0x37 data : 0x02
[   32.415764] SMB136 addr : 0x38 data : 0x00
[   32.416539] SMB136 addr : 0x39 data : 0x00
[   32.417466] SMB136 addr : 0x3a data : 0x22
[   32.418154] SMB136 addr : 0x3b data : 0x0a
[   32.419078] SMB136 addr : 0x3c data : 0x00
[   32.420252] smb136_get_charging_status : 0x36h(0x31), 0x39h(0x00)
[   32.421078] fsa9480 7-0025: prev_dev1: 0x40, prev_dev2: 0x0
[   32.421615] fsa9480 7-0025: new_dev1: 0x0, new_dev2: 0x0
[   32.421913] sec_bat_set_cable : cable_type = 0 ( 0 : NONE, 1: USB, 2: TA) 
[   32.422516] android_work: did not send uevent (0 0   (null))
[   36.629449] android_work: did not send uevent (0 0   (null))
[   36.872321] fsa9480 7-0025: prev_dev1: 0x0, prev_dev2: 0x0
[   36.872949] fsa9480 7-0025: new_dev1: 0x4, new_dev2: 0x0
[   36.874234] sec_switch_set_regulator (mode : 0)
[   36.876196] sec_bat_set_cable : cable_type = 1 ( 0 : NONE, 1: USB, 2: TA) 
[   36.881163] android_work: did not send uevent (0 0   (null))
[   36.896953] smb136_charging : enable(1), cable_status(1)
[   36.999694] android_work: did not send uevent (0 0   (null))
[   37.108959] android_work: sent uevent USB_STATE=CONNECTED
[   37.242319] android_usb gadget: high speed config #1: android
[   37.243992] android_work: sent uevent USB_STATE=CONFIGURED
[   85.708132] adbd (145): /proc/145/oom_adj is deprecated, please use /proc/145/oom_score_adj instead.
[  207.315567] [TSP] Flags Counted channels: t:5 a:0 
[  207.518662] [TSP] Flags Counted channels: t:3 a:0 
[  214.611976] s3c-sdhci.2: ldo on
[  214.646985] s3c-sdhci.2: ldo down
[  214.648786] s3c-sdhci.2: ldo on
[  214.686017] s3c-sdhci.2: ldo down
[  214.688234] s3c-sdhci.2: ldo on
[  214.725050] s3c-sdhci.2: ldo down
[  214.726803] s3c-sdhci.2: ldo on
[  214.764073] s3c-sdhci.2: ldo down
[  258.869666] s3c-sdhci.2: ldo on
[  258.932396] mmc1: error -110 whilst initialising SD card
[  258.933966] s3c-sdhci.2: ldo down
[  258.935992] s3c-sdhci.2: ldo on
[  258.999779] mmc1: error -110 whilst initialising SD card
[  259.001470] s3c-sdhci.2: ldo down
[  259.003442] s3c-sdhci.2: ldo on
[  259.071853] mmc1: error -110 whilst initialising SD card
[  259.073847] s3c-sdhci.2: ldo down
[  259.075645] s3c-sdhci.2: ldo on
[  259.146103] mmc1: error -110 whilst initialising SD card
[  259.148104] s3c-sdhci.2: ldo down
[  279.572744] s3c-sdhci.2: ldo on
[  279.607798] s3c-sdhci.2: ldo down
[  279.609551] s3c-sdhci.2: ldo on
[  279.646872] s3c-sdhci.2: ldo down
[  279.648668] s3c-sdhci.2: ldo on
[  279.685826] s3c-sdhci.2: ldo down
[  279.688067] s3c-sdhci.2: ldo on
[  279.724945] s3c-sdhci.2: ldo down
[  298.924327] s3c-sdhci.2: ldo on
[  299.187592] mmc1: error -110 whilst initialising SD card
[  299.189169] s3c-sdhci.2: ldo down
[  299.191122] s3c-sdhci.2: ldo on
[  299.601301] mmc1: new high speed SDHC card at address b368
[  299.605521] mmcblk1: mmc1:b368 LEXAR 29.8 GiB 
[  299.610357]  mmcblk1: p1
[  299.928866] [TSP] Flags Counted channels: t:1 a:0 
[  299.929812] [TSP] calibration was good
[  303.834846] mmc1: card b368 removed
[  303.854438] s3c-sdhci.2: ldo down
[  303.856245] s3c-sdhci.2: ldo on
[  303.893049] s3c-sdhci.2: ldo down
[  303.894808] s3c-sdhci.2: ldo on
[  303.931878] s3c-sdhci.2: ldo down
[  303.933657] s3c-sdhci.2: ldo on
[  303.971089] s3c-sdhci.2: ldo down
[  303.973538] s3c-sdhci.2: ldo on
[  304.010200] s3c-sdhci.2: ldo down
[  304.361646] s3c-sdhci.2: ldo on
[  304.764039] mmc1: new high speed SDHC card at address b368
[  304.767469] mmcblk1: mmc1:b368 LEXAR 29.8 GiB 
[  304.772155]  mmcblk1: p1
[ 1255.174980] yaffs: dev is 32505858 name is "mtdblock2" rw
[ 1255.175058] yaffs: passed flags ""
[ 1255.175127] yaffs: Attempting MTD mount of 31.2,"mtdblock2"
[ 1255.457680] yaffs: yaffs_read_super: is_checkpointed 1
[ 1255.458203] SELinux: initialized (dev mtdblock2, type yaffs2), uses xattr
[ 1255.596610] SysRq : Emergency Remount R/O
[ 1255.600718] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[ 1255.603439] Emergency Remount complete
[ 1255.703987] Restarting system.
[ 1255.704075] 
[ 1255.704154] Restarting Linux version 3.0.89-gb1c64eb (build01@cyanogenmod) (gcc version 4.7 (GCC) ) #1 PREEMPT Wed Aug 14 08:36:50 PDT 2013
[ 1255.704164] 
[ 1255.708288] arch_reset: attempting watchdog reset

No errors detected