NetBSD-evbarm-aarch64_FDT_11.0_RC2_on_Raspberry_Pi_4B.log

[   1.0000000] NetBSD/evbarm (fdt) booting ...
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024, 2025, 2026
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 11.0_RC2 (GENERIC64_INSECURE) #6: Wed Mar 18 20:43:08 JST 2026
[   1.0000000] 	tsutsui@mirage:/s/netbsd-11/src/sys/arch/evbarm/compile/GENERIC64_INSECURE
[   1.0000000] total memory = 3938 MB
[   1.0000000] avail memory = 3794 MB
[   1.0000000] armfdt0 (root)
[   1.0000000] simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.5
[   1.0000000] simplebus1 at simplebus0
[   1.0000000] simplebus2 at simplebus0
[   1.0000000] cpus0 at simplebus0
[   1.0000000] simplebus3 at simplebus0
[   1.0000000] simplebus4 at simplebus0
[   1.0000000] simplebus5 at simplebus0
[   1.0000000] cpu0 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x0
[   1.0000000] cpu0: package 0, core 0, smt 0, numa 0
[   1.0000000] cpu1 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x1
[   1.0000000] cpu1: package 0, core 1, smt 0, numa 0
[   1.0000000] cpu2 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x2
[   1.0000000] cpu2: package 0, core 2, smt 0, numa 0
[   1.0000000] cpu3 at cpus0: Arm Cortex-A72 r0p3 (v8-A), id 0x3
[   1.0000000] cpu3: package 0, core 3, smt 0, numa 0
[   1.0000000] gic0 at simplebus1: GIC
[   1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
[   1.0000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
[   1.0000000] syscon0 at simplebus1: System Controller Registers
[   1.0000000] fclock0 at simplebus2: 54000000 Hz fixed clock (osc)
[   1.0000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[   1.0000000] syscon1 at simplebus1: couldn't get registers
[   1.0000000] bcmaux0 at simplebus1
[   1.0000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[   1.0000000] fclock2 at simplebus0sysctl_createv: sysctl_create(108MHz-clock) returned 22
fclock2: failed to create sysctl node for 108MHz-clock (108MHz-clock): 22
[   1.0000000] : 108000000 Hz fixed clock (108MHz-clock)
[   1.0000000] fclock3 at simplebus0sysctl_createv: sysctl_create(27MHz-clock) returned 22
fclock3: failed to create sysctl node for 27MHz-clock (27MHz-clock): 22
[   1.0000000] : 27000000 Hz fixed clock (27MHz-clock)
[   1.0000000] bcmicu0 at simplebus1: Multiprocessor
[   1.0000000] gtmr0 at simplebus0: Generic Timer
[   1.0000000] gtmr0: interrupting on GIC irq 27
[   1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[   1.0000040] bcmgpio0 at simplebus1: GPIO controller 2838
[   1.0000040] bcmgpio0: pins 0..31 interrupting on GIC irq 145
[   1.0000040] bcmgpio0: pins 32..58 interrupting on GIC irq 146
[   1.0000040] gpio0 at bcmgpio0: 58 pins
[   1.0000040] gregulator0 at simplebus0: vdd-sd-io
[   1.0000040] gregulator0: cannot get pin 0
[   1.0000040] fregulator0 at simplebus0: vcc-sd
[   1.0000040] plcom0 at simplebus1: ARM PL011 UART
[   1.0000040] plcom0: txfifo 16 bytes
[   1.0000040] plcom0: interrupting on GIC irq 153
[   1.0000040] com0 at simplebus1: BCM AUX UART, 1-byte FIFO
[   1.0000040] com0: console
[   1.0000040] com0: interrupting on GIC irq 125, clock 1000000000 Hz
[   1.0000040] mmcpwrseq0 at simplebus0: couldn't get reset GPIOs
[   1.0000040] /soc/avs-monitor@7d5d2000/thermal at syscon0 not configured
[   1.0000040] /soc/power at simplebus1 not configured
[   1.0000040] /phy at simplebus0 not configured
[   1.0000040] /soc/clock@7ef00000 at simplebus1 not configured
[   1.0000040] /soc/interrupt-controller@7ef00100 at simplebus1 not configured
[   1.0000040] /soc/i2c@7ef04500 at simplebus1 not configured
[   1.0000040] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10
[   1.0000040] /soc/i2c@7ef09500 at simplebus1 not configured
[   1.0000040] bcmmbox0 at simplebus1: VC mailbox
[   1.0000040] bcmmbox0: interrupting on GIC irq 65
[   1.0000040] vcmbox0 at bcmmbox0
[   1.0000040] bcm2838pcie0 at simplebus3: Broadcom PCIE Host Controller
[   1.0000040] bcm2838pcie0: Using 3GB DMA subregion
[   1.0000040] RootBridge Revision 304
[   1.0000040] pci0 at bcm2838pcie0 bus 0
[   1.0000040] ppb0 at pci0 dev 0 function 0: vendor 14e4 product 2711 (rev. 0x20)
[   1.0000040] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[   1.0000040] pci1 at ppb0 bus 1
[   1.0000040] xhci0 at pci1 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01)
[   1.0000040] xhci0: interrupting at GIC irq 175
[   1.0000040] usb0 at xhci0: USB revision 3.0
[   1.0000040] usb1 at xhci0: USB revision 2.0
[   1.0000040] genet0 at simplebus3: GENETv5.0
[   1.0000040] genet0: Ethernet address 88:a2:9e:4f:6b:37
[   1.0000040] brgphy0 at genet0 phy 1: BCM54213PE 1000BASE-T media interface, rev. 2
[   1.0000040] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000040] genet0: interrupting on GIC irq 189
[   1.0000040] /soc/timer@7e003000 at simplebus1 not configured
[   1.0000040] /soc/txp@7e004000 at simplebus1 not configured
[   1.0000040] bsciic0 at simplebus1: Broadcom Serial Controller
[   1.0000040] bsciic0: interrupting on GIC irq 149
[   1.0000040] iic0 at bsciic0: I2C bus
[   1.0000040] sdhc0 at simplebus1: SDHC controller
[   1.0000040] sdhc0: interrupting on GIC irq 158
[   1.0000040] bsciic1 at simplebus1: Broadcom Serial Controller
[   1.0000040] bsciic1: interrupting on GIC irq 149
[   1.0000040] iic1 at bsciic1: I2C bus
[   1.0000040] dwctwo0 at simplebus1: USB controller
[   1.0000040] dwctwo0: interrupting on GIC irq 105
[   1.0000040] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[   1.0000040] /soc/pixelvalve@7e206000 at simplebus1 not configured
[   1.0000040] /soc/pixelvalve@7e207000 at simplebus1 not configured
[   1.0000040] /soc/pixelvalve@7e20a000 at simplebus1 not configured
[   1.0000040] /soc/pwm@7e20c800 at simplebus1 not configured
[   1.0000040] /soc/pixelvalve@7e216000 at simplebus1 not configured
[   1.0000040] /soc/hdmi@7ef00700 at simplebus1 not configured
[   1.0000040] /soc/hdmi@7ef05700 at simplebus1 not configured
[   1.0000040] vchiq0 at simplebus1: BCM2835 VCHIQ
[   1.0000040] /gpu at simplebus0 not configured
[   1.0000040] sdhc1 at simplebus4: SDHC controller
[   1.0000040] sdhc1: interrupting on GIC irq 158
[   1.0000040] armpmu0 at simplebus0: Performance Monitor Unit
[   1.0000040] gpioleds0 at simplebus0: ACT
[   1.0000040] /soc/rng@7e104000 at simplebus1 not configured
[   1.0000040] genfb0 at simplebus5: Simple Framebuffer (1920x1080 32-bpp @ 0x3e402000)
[   1.0000040] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[   1.0000040] WARNING: system needs entropy for security; see entropy(7)
[   1.7659052] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[   1.7759075] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[   1.7859098] sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[   1.7959122] sdmmc0 at sdhc0 slot 0
[   1.7999133] usb2 at dwctwo0: USB revision 2.0
[   1.8049145] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[   1.8239193] sdmmc1 at sdhc1 slot 0
[   1.8499255] armpmu0: interrupting on GIC irq 48
[   1.8539263] armpmu0: interrupting on GIC irq 49
[   1.8589274] armpmu0: interrupting on GIC irq 50
[   1.8639286] armpmu0: interrupting on GIC irq 51
[   1.8729309] uhub2 at usb2: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[   2.0009564] sdmmc1: SD card status: 4-bit, C10, U1, V10
[   2.0049571] ld1 at sdmmc1: <0x45:0x2d42:Team:0x00:0x1de80f36:0x122>
[   2.0119589] ld1: 59760 MB, 7618 cyl, 255 head, 63 sec, 512 bytes/sect x 122388480 sectors (0 bytes/physsect)
[   2.0249620] dk0 at ld1: "EFI", 163840 blocks at 32768, type: msdos
[   2.0309631] dk1 at ld1: "netbsd-root", 122183680 blocks at 196608, type: ffs
[   2.0379649] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[   2.0859737] sdmmc0: 4-bit width, 50.000 MHz
[   2.0909754] sdmmc0: SDIO function
[   2.0939750] bwfm0 at sdmmc0 function 1
[   2.0999762] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[   2.1079772] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured
[   2.2700033] uhub3 at uhub1 port 1: vendor 2109 (0x2109) USB2.0 Hub (0x3431), class 9/0, rev 2.10/4.21, addr 1
[   2.2795943] uhub3: single transaction translator
[   3.0003769] uhub4 at uhub3 port 4: vendor 05e3 (0x05e3) USB2.0 Hub (0x0606), class 9/0, rev 2.00/7.02, addr 2
[   3.0105409] uhub4: single transaction translator
[   3.7313235] uhub5 at uhub4 port 4: Chicony (0x04fe) Generic USB Hub (0x0008), class 9/0, rev 1.10/1.02, addr 3
[   4.4695559] uhidev0 at uhub5 port 1 configuration 1 interface 0
[   4.4747853] uhidev0: Chicony (0x04fe) PFU-68 USB Keyboard (0x0007), rev 1.10/1.02, addr 4, iclass 3/1
[   4.4893038] ukbd0 at uhidev0
[   4.4914459] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[   4.5038533] swwdog0: software watchdog initialized
[   4.5128557] WARNING: 5 errors while detecting hardware; check system log.
[   4.5188561] boot device: ld1
[   4.5238575] root on dk1
[   4.5308592] root file system type: ffs
[   4.5373083] kern.module.path=/stand/evbarm/11.0/modules
[   4.5418836] WARNING: no TOD clock present
[   4.5418836] vchiq0: interrupting on GIC irq 66
[   4.5459375] WARNING: using filesystem time
[   4.5545740] vcaudio0 at vchiq0: auds
[   4.5582889] WARNING: CHECK AND RESET THE DATE!
[   4.5636822] audio0 at vcaudio0: playback
[   4.5666822] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback
[   4.5756844] spkr0 at audio0: PC Speaker (synthesized)
[   4.5806854] wsbell at spkr0 not configured
[   5.9209141] bwfm0: CHIPACTIVE
[   6.0209299] bwfm0: address 88:a2:9e:4f:6b:39
[   6.0252384] bwfm0: wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[   6.2343925] entropy: best effort
Wed Mar 18 23:59:36 JST 2026
Starting root file system check:
/dev/rdk1: file system is clean; not checking
Not resizing / (NAME=netbsd-root): already correct size
Starting devpubd.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting file system checks:
/dev/rdk0: 240 files, 22518 free (22518 clusters)
[   7.5243205] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: arm64
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Starting mdnsd.
Building databases: dev, utmp, utmpx.
wsconscfg: screen 1 is already configured
wsconscfg: screen 2 is already configured
wsconscfg: screen 3 is already configured
Keyboard encoding -> us.swapctrlcaps
ttyE0: font -> "Terminus32-ISO8859-1"
Starting syslogd.
Setting date via ntp.
Mar 18 23:59:39 arm64 ntpdate[1267]: name server cannot be used: Temporary failure in name resolution (2)
Exiting, name server cannot be used: Temporary failure in name resolution (2)/etc/rc.d/ntpdate exited with code 1
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache: done.
Checking quotas: done.
Configuring GPIO.
Starting virecover.
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
The following components reported failures:
    /etc/rc.d/ntpdate
See /var/run/rc.log for more information.
Wed Mar 18 23:59:44 JST 2026

NetBSD/evbarm (arm64) (constty)

login: root
Mar 18 23:59:47 arm64 login: ROOT LOGIN (root) on tty constty
Last login: Wed Mar 18 23:42:38 2026 on constty
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024, 2025, 2026
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 11.0_RC2 (GENERIC64_INSECURE) #6: Wed Mar 18 20:43:08 JST 2026

Welcome to NetBSD!

We recommend that you create a non-root account and use su(1) for root access.
arm64# uname -ap
NetBSD arm64 11.0_RC2 NetBSD 11.0_RC2 (GENERIC64_INSECURE) #6: Wed Mar 18 20:43:08 JST 2026  tsutsui@mirage:/s/netbsd-11/src/sys/arch/evbarm/compile/GENERIC64_INSECURE evbarm aarch64
arm64# sysctl hw.model
hw.model = raspberrypi,4-model-b
arm64#