Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Select an option

  • Save tsutsui/bd35e381db68cfa39989d95ebfec3375 to your computer and use it in GitHub Desktop.

Select an option

Save tsutsui/bd35e381db68cfa39989d95ebfec3375 to your computer and use it in GitHub Desktop.
ok
[ 1.0000000] uboot: args 0, 0xc42, 0x2eff6a00, 0x1000040
[ 1.0000000] NetBSD/evbarm (fdt) booting ...
[ 1.0000000] FDT /memory @ 0x0 size 0x3b400000
[ 1.0000000] FDT /memory @ 0x40000000 size 0xbc000000
[ 1.0000000] initarm: memory start 0 end fc000000 (len fc000000)
[ 1.0000000] initarm: fdt_build_bootconfig
[ 1.0000000] Usable memory:
[ 1.0000000] 1000 - 3b3fffff
[ 1.0000000] 40000000 - fbffffff
[ 1.0000000] cpu_kernel_vm_init: kernel phys start 0 end fc000000
[ 1.0000000] arm32_bootmem_init: kern_vtopdiff=0x7f000000
[ 1.0000000] arm32_bootmem_init: kstartva=0x80000000, kernelstart=0x1000000
[ 1.0000000] arm32_bootmem_init: memstart=0, memsize=0xfc000000
[ 1.0000000] arm32_bootmem_init: kernelstart=0x1000000, kernelend=0x1b7c000
[ 1.0000000] arm32_bootmem_init: kernel phys start 0x1000000 end 0x1b7c000
[ 1.0000000] arm32_bootmem_init: adding 1025156 free pages: [0x1b7c000..0xfbffffff] (VA 0x80b7c000)
[ 1.0000000] arm32_bootmem_init: adding 4096 free pages: [0..0xffffff] (VA 0x7f000000)
[ 1.0000000] arm32_kernel_vm_init: 3 L2 pages are needed to map 0xbbb000 kernel bytes
[ 1.0000000] arm32_kernel_vm_init: allocating page tables for kernel l1ptadd_pages: adding pv 0x80b77f34 (pa 0x1b7c000, va 0x80b7c000, 4 pages) at tail
[ 1.0000000] add_pages: appending pv 0x80aecca8 (0x1b80000..0x1b83fff) to 0x1b7c000..0x1b7ffff
[ 1.0000000] add_pages: appending pv 0x80a23b10 (0x1b84000..0x1b84fff) to 0x1b7c000..0x1b83fff
[ 1.0000000] add_pages: appending pv 0x80a23b24 (0x1b85000..0x1b85fff) to 0x1b7c000..0x1b84fff
[ 1.0000000] add_pages: appending pv 0x80a23b38 (0x1b86000..0x1b86fff) to 0x1b7c000..0x1b85fff
[ 1.0000000] vmadd_pages: appending pv 0x80a23b4c (0x1b87000..0x1b87fff) to 0x1b7c000..0x1b86fff
[ 1.0000000] add_pages: appending pv 0x80a23b60 (0x1b88000..0x1b88fff) to 0x1b7c000..0x1b87fff
[ 1.0000000] add_pages: appending pv 0x80a23b74 (0x1b89000..0x1b89fff) to 0x1b7c000..0x1b88fff
[ 1.0000000] add_pages: appending pv 0x80a23b88 (0x1b8a000..0x1b8afff) to 0x1b7c000..0x1b89fff
[ 1.0000000] add_pages: appending pv 0x80a23b9c (0x1b8b000..0x1b8bfff) to 0x1b7c000..0x1b8afff
[ 1.0000000] add_pages: appending pv 0x80a23bb0 (0x1b8c000..0x1b8cfff) to 0x1b7c000..0x1b8bfff
[ 1.0000000] add_pages: appending pv 0x80a23bc4 (0x1b8d000..0x1b8dfff) to 0x1b7c000..0x1b8cfff
[ 1.0000000] add_pages: appending pv 0x80a23bd8 (0x1b8e000..0x1b8efff) to 0x1b7c000..0x1b8dfff
[ 1.0000000] arm32_kernel_vm_init: allocating stacks
[ 1.0000000] add_pages: appending pv 0x80aebe80 (0x1b8f000..0x1b92fff) to 0x1b7c000..0x1b8efff
[ 1.0000000] add_pages: appending pv 0x80aebe6c (0x1b93000..0x1b96fff) to 0x1b7c000..0x1b92fff
[ 1.0000000] add_pages: appending pv 0x80aebe58 (0x1b97000..0x1b9afff) to 0x1b7c000..0x1b96fff
[ 1.0000000] add_pages: appending pv 0x80aebe44 (0x1b9b000..0x1b9efff) to 0x1b7c000..0x1b9afff
[ 1.0000000] add_pages: appending pv 0x80aebe2c (0x1b9f000..0x1ba6fff) to 0x1b7c000..0x1b9efff
[ 1.0000000] add_pages: appending pv 0x80aebe94 (0x1ba7000..0x1ba8fff) to 0x1b7c000..0x1ba6fff
[ 1.0000000] add_pages: appending pv 0x80b77bb0 (0x1ba9000..0x1bb0fff) to 0x1b7c000..0x1ba8fff
[ 1.0000000] Creating L1 page table at 0x80b7c000/0x01b7c000
[ 1.0000000] arm32_kernel_vm_init: kernel_base 80000000 KERNEL_L2PT_KERNEL_NUM 3
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b84000, PA 0x1b84000) for VA 0x80000000 (kernel)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b85000, PA 0x1b85000) for VA 0x80400000 (kernel)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b86000, PA 0x1b86000) for VA 0x80800000 (kernel)
[ 1.0000000] arm32_kernel_vm_init: kernel_vm_base 90000000 KERNEL_L2PT_VMDATA_NUM 8
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b87000, PA 0x1b87000) for VA 0x90000000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b88000, PA 0x1b88000) for VA 0x90400000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b89000, PA 0x1b89000) for VA 0x90800000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b8a000, PA 0x1b8a000) for VA 0x90c00000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b8b000, PA 0x1b8b000) for VA 0x91000000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b8c000, PA 0x1b8c000) for VA 0x91400000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b8d000, PA 0x1b8d000) for VA 0x91800000 (vm)
[ 1.0000000] arm32_kernel_vm_init: adding L2 pt (VA 0x80b8e000, PA 0x1b8e000) for VA 0x91c00000 (vm)
[ 1.0000000] Mapping kernel
[ 1.0000000] arm32_kernel_vm_init: adding chunk for kernel text 0x1000000..0x16c1fff (VA 0x80000000)
[ 1.0000000] add_pages: adding pv 0x80b77f20 (pa 0x1000000, va 0x80000000, 1730 pages) before pa 0x1b7c000
[ 1.0000000] arm32_kernel_vm_init: adding chunk for kernel data/bss 0x16c2000..0x1b7bfff (VA 0x806c2000)
[ 1.0000000] add_pages: adding pv 0x80b77f0c (pa 0x16c2000, va 0x806c2000, 1210 pages) before pa 0x1b7c000
[ 1.0000000] Listing Chunks
[ 1.0000000] arm32_kernel_vm_init: pv 0x80b77f20: chunk VA 0x80000000..0x806c1fff (PA 0x1000000, prot 5, cache 1)
[ 1.0000000] arm32_kernel_vm_init: pv 0x80b77f0c: chunk VA 0x806c2000..0x80b7bfff (PA 0x16c2000, prot 3, cache 1)
[ 1.0000000] arm32_kernel_vm_init: pv 0x80b77f34: chunk VA 0x80b7c000..0x80bb0fff (PA 0x1b7c000, prot 3, cache 1)
[ 1.0000000] Mapping Chunks
[ 1.0000000] arm32_kernel_vm_init: mapping chunk VA 0x80000000..0x806c1fff (PA 0x1000000, prot 5, cache 1)
[ 1.0000000] SSSSSSLLLLLLLLLLLLPP
[ 1.0000000] arm32_kernel_vm_init: mapping chunk VA 0x806c2000..0x80b7bfff (PA 0x16c2000, prot 3, cache 1)
[ 1.0000000] PPPPPPPPPPPPPPLLLSSSSLLLLLLLPPPPPPPPPPPP
[ 1.0000000] arm32_kernel_vm_init: mapping last chunk VA 0x80b7c000..0x80bb0fff (PA 0x1b7c000, prot 3, cache 1)
[ 1.0000000] PPPPLLLP
[ 1.0000000] sS
[ 1.0000000] S
[ 1.0000000] S
[ 1.0000000] Physical Virtual Num
[ 1.0000000] Starting Ending Starting Ending Pages
[ 1.0000000] text section: 0x01000000 0x016c1fff 0x80000000 0x806c1fff 1730
[ 1.0000000] data section: 0x017b0000 0x01a23a60 0x807b0000 0x80a23a60 628
[ 1.0000000] bss section: 0x01a23a60 0x01b6c5d0 0x80a23a60 0x80b6c5d0 330
[ 1.0000000] L1 page directory: 0x01b7c000 0x01b7ffff 0x80b7c000 0x80b7ffff 4
[ 1.0000000] EFI L1 page directory: 0x01b80000 0x01b83fff 0x80b80000 0x80b83fff 4
[ 1.0000000] ABT stack (CPU 0): 0x01b8f000 0x01b8ffff 0x80b8f000 0x80b8ffff 1
[ 1.0000000] FIQ stack (CPU 0): 0x01b93000 0x01b93fff 0x80b93000 0x80b93fff 1
[ 1.0000000] IRQ stack (CPU 0): 0x01b97000 0x01b97fff 0x80b97000 0x80b97fff 1
[ 1.0000000] UND stack (CPU 0): 0x01b9b000 0x01b9bfff 0x80b9b000 0x80b9bfff 1
[ 1.0000000] IDLE stack (CPU 0): 0x01b9f000 0x01ba0fff 0x80b9f000 0x80ba0fff 2
[ 1.0000000] SVC stack: 0x01ba7000 0x01ba8fff 0x80ba7000 0x80ba8fff 2
[ 1.0000000] Message Buffer: 0x01ba9000 0x01bb0fff 0x80ba9000 0x80bb0fff 8
[ 1.0000000] Free Memory: 0x01bb1000 0xfbffffff 1025103
[ 1.0000000] Free Memory: 0x00000000 0x00ffffff 4096
[ 1.0000000] TTBR0=0x1b7805b TTBR1=0x1b7805b TTBCR=0x1 CONTEXTIDR=0
[ 1.0000000] switching to new L1 page table @0x1b7c000...
[ 1.0000000] ttb
[ 1.0000000] sctlr=0xc5183d actlr=0
[ 1.0000000] OK
[ 1.0000000] bootargs: video=HDMI-A-1:1920x1080M@60 dma.dmachans=0x37f5 bcm2709.boardrev=0xc03115 bcm2709.serial=0xbcfe2a5e bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=88:A2:9E:4F:6B:37 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=ld1a console=fb
[ 1.0000000] Memory regions:
[ 1.0000000] 1000 - ffffff
[ 1.0000000] 1bb1000 - 3b3fffff
[ 1.0000000] 40000000 - fbffffff
[ 1.0000000] nfreeblocks = 2, free_pages = 1029199 (0xfb44f)
[ 1.0000000] bootstrap done.
[ 1.0000000] vectors vbar=0x8009e8c0 0x8009e8c0
[ 1.0000000] init subsystems: stacks vectors undefined vfp page pmap_physload
[ 1.0000000] block 0 start 01bb1000 end fc000000
[ 1.0000000] bp 0 start 00001000 end 01000000
[ 1.0000000] bp 1 start 01bb1000 end 3b400000
[ 1.0000000] start 01bb1000 end 3b400000... loading in freelist 0
[ 1.0000000] bp 2 start 40000000 end fc000000
[ 1.0000000] start 40000000 end fc000000... loading in freelist 0
[ 1.0000000] block 1 start 00000000 end 01000000
[ 1.0000000] bp 0 start 00001000 end 01000000
[ 1.0000000] start 00001000 end 01000000... loading in freelist 0
[ 1.0000000] pmap kpm tlb0 kcpusets efirt locks l1pt cache(l1pt) specials pools [ Kernel symbol table missing! ]
[ 1.0000000] done.
[ 1.0000000] mpstart
[ 1.0000000] cpu_enable_bcm2836: bcm2711 cpuno=1 mpidr=0x1 iot=0x80ac61f8 bs_w_4=0x8009a0a8 ioh=0xff800000
[ 1.0000000] cpu_enable_bcm2836: bcm2711 cpuno=2 mpidr=0x2 iot=0x80ac61f8 bs_w_4=0x8009a0a8 ioh=0xff800000
[ 1.0000000] cpu_enable_bcm2836: bcm2711 cpuno=3 mpidr=0x3 iot=0x80ac61f8 bs_w_4=0x8009a0a8 ioh=0xff800000
[ 1.0000000] start 01b70000 end 01b7c000... loading in freelist 0
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025, 2026
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 11.0_RC2 (GENERIC_INSECURE) #9: Thu Mar 19 01:50:42 JST 2026
[ 1.0000000] tsutsui@mirage:/s/netbsd-11/src/sys/arch/evbarm/compile/GENERIC_INSECURE
[ 1.0000000] total memory = 4032 MB
[ 1.0000000] avail memory = 3863 MB
[ 1.0000000] armfdt0 (root)
[ 1.0000000] simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.5
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] simplebus2 at simplebus0
[ 1.0000000] cpus0 at simplebus0
[ 1.0000000] simplebus3 at simplebus0
[ 1.0000000] simplebus4 at simplebus0
[ 1.0000000] simplebus5 at simplebus0
[ 1.0000000] cpu0 at cpus0: 600 MHz Cortex-A72 r0p3 (Cortex V8A core)
[ 1.0000000] cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
[ 1.0000000] cpu0: L1 48KB/64B 3-way (256 set) PIPT Instruction cache
[ 1.0000000] cpu0: L1 32KB/64B 2-way (256 set) write-back-locking-C PIPT Data cache
[ 1.0000000] cpu0: L2 1024KB/64B 16-way (1024 set) write-through PIPT Unified cache
[ 1.0000000] cpu0: unrecognized VFP version 0x41034080
[ 1.0000000] cpu1 at cpus0: 600 MHz Cortex-A72 r0p3 (Cortex V8A core)
[ 1.0000000] cpu1: DC enabled IC enabled WB enabled EABT branch prediction enabled
[ 1.0000000] cpu1: L1 48KB/64B 3-way (256 set) PIPT Instruction cache
[ 1.0000000] cpu1: L1 32KB/64B 2-way (256 set) write-back-locking-C PIPT Data cache
[ 1.0000000] cpu1: L2 1024KB/64B 16-way (1024 set) write-through PIPT Unified cache
[ 1.0000000] cpu1: unrecognized VFP version 0x41034080
[ 1.0000000] cpu2 at cpus0: 600 MHz Cortex-A72 r0p3 (Cortex V8A core)
[ 1.0000000] cpu2: DC enabled IC enabled WB enabled EABT branch prediction enabled
[ 1.0000000] cpu2: L1 48KB/64B 3-way (256 set) PIPT Instruction cache
[ 1.0000000] cpu2: L1 32KB/64B 2-way (256 set) write-back-locking-C PIPT Data cache
[ 1.0000000] cpu2: L2 1024KB/64B 16-way (1024 set) write-through PIPT Unified cache
[ 1.0000000] cpu2: unrecognized VFP version 0x41034080
[ 1.0000000] cpu3 at cpus0: 600 MHz Cortex-A72 r0p3 (Cortex V8A core)
[ 1.0000000] cpu3: DC enabled IC enabled WB enabled EABT branch prediction enabled
[ 1.0000000] cpu3: L1 48KB/64B 3-way (256 set) PIPT Instruction cache
[ 1.0000000] cpu3: L1 32KB/64B 2-way (256 set) write-back-locking-C PIPT Data cache
[ 1.0000000] cpu3: L2 1024KB/64B 16-way (1024 set) write-through PIPT Unified cache
[ 1.0000000] cpu3: unrecognized VFP version 0x41034080
[ 1.0000000] gic0 at simplebus1: GIC
[ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
[ 1.0000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
[ 1.0000000] syscon0 at simplebus1: System Controller Registers
[ 1.0000000] fclock0 at simplebus2: 54000000 Hz fixed clock (osc)
[ 1.0000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[ 1.0000000] syscon1 at simplebus1: couldn't get registers
[ 1.0000000] bcmaux0 at simplebus1
[ 1.0000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[ 1.0000000] fclock2 at simplebus0sysctl_createv: sysctl_create(108MHz-clock) returned 22
fclock2: failed to create sysctl node for 108MHz-clock (108MHz-clock): 22
[ 1.0000000] : 108000000 Hz fixed clock (108MHz-clock)
[ 1.0000000] fclock3 at simplebus0sysctl_createv: sysctl_create(27MHz-clock) returned 22
fclock3: failed to create sysctl node for 27MHz-clock (27MHz-clock): 22
[ 1.0000000] : 27000000 Hz fixed clock (27MHz-clock)
[ 1.0000000] bcmicu0 at simplebus1: Multiprocessor
[ 1.0000000] gtmr0 at simplebus0: Generic Timer
[ 1.0000000] gtmr0: interrupting on GIC irq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[ 1.0000040] gregulator0 at simplebus0: vdd-sd-io
[ 1.0000040] gregulator0: cannot get pin 0
[ 1.0000040] plcom0 at simplebus1: ARM PL011 UART
[ 1.0000040] plcom0: txfifo 16 bytes
[ 1.0000040] plcom0: interrupting on GIC irq 153
[ 1.0000040] com0 at simplebus1: BCM AUX UART, 1-byte FIFO
[ 1.0000040] com0: console
[ 1.0000040] com0: interrupting on GIC irq 125, clock 1000000000 Hz
[ 1.0000040] fregulator0 at simplebus0: vcc-sd
[ 1.0000040] usbnopphy0 at simplebus0: USB PHY
[ 1.0000040] /soc/avs-monitor@7d5d2000/thermal at syscon0 not configured
[ 1.0000040] bcmgpio0 at simplebus1: GPIO controller 2838
[ 1.0000040] bcmgpio0: pins 0..31 interrupting on GIC irq 145
[ 1.0000040] bcmgpio0: pins 32..58 interrupting on GIC irq 146
[ 1.0000040] gpio0 at bcmgpio0: 58 pins
[ 1.0000040] /soc/power at simplebus1 not configured
[ 1.0000040] mmcpwrseq0 at simplebus0: couldn't get reset GPIOs
[ 1.0000040] /soc/clock@7ef00000 at simplebus1 not configured
[ 1.0000040] /soc/interrupt-controller@7ef00100 at simplebus1 not configured
[ 1.0000040] /soc/i2c@7ef04500 at simplebus1 not configured
[ 1.0000040] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10
[ 1.0000040] /soc/i2c@7ef09500 at simplebus1 not configured
[ 1.0000040] bcmmbox0 at simplebus1: VC mailbox
[ 1.0000040] bcmmbox0: interrupting on GIC irq 65
[ 1.0000040] vcmbox0 at bcmmbox0
[ 1.0000040] bcm2838pcie0 at simplebus3: Broadcom PCIE Host Controller
[ 1.0000040] RootBridge Revision 304
[ 1.0000040] pci0 at bcm2838pcie0 bus 0
[ 1.0000040] ppb0 at pci0 dev 0 function 0: vendor 14e4 product 2711 (rev. 0x20)
[ 1.0000040] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[ 1.0000040] pci1 at ppb0 bus 1
[ 1.0000040] xhci0 at pci1 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01)
[ 1.0000040] xhci0: interrupting at GIC irq 175
[ 1.0000040] xhci0: xHCI version ee.10 not known to be supported
[ 1.0000040] xhci0: controller not ready timeout
[ 1.0000040] xhci0: init failed, error=5
[ 1.0000040] /scb/ethernet@7d580000 at simplebus3 not configured
[ 1.0000040] /soc/timer@7e003000 at simplebus1 not configured
[ 1.0000040] /soc/txp@7e004000 at simplebus1 not configured
[ 1.0000040] bsciic0 at simplebus1: Broadcom Serial Controller
[ 1.0000040] bsciic0: interrupting on GIC irq 149
[ 1.0000040] iic0 at bsciic0: I2C bus
[ 1.0000040] sdhc0 at simplebus1: SDHC controller
[ 1.0000040] sdhc0: interrupting on GIC irq 158
[ 1.0000040] bsciic1 at simplebus1: Broadcom Serial Controller
[ 1.0000040] bsciic1: interrupting on GIC irq 149
[ 1.0000040] iic1 at bsciic1: I2C bus
[ 1.0000040] dwctwo0 at simplebus1: USB controller
[ 1.0000040] dwctwo0: interrupting on GIC irq 105
[ 1.0000040] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[ 1.0000040] /soc/pixelvalve@7e206000 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7e207000 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7e20a000 at simplebus1 not configured
[ 1.0000040] /soc/pwm@7e20c800 at simplebus1 not configured
[ 1.0000040] /soc/pixelvalve@7e216000 at simplebus1 not configured
[ 1.0000040] /soc/hdmi@7ef00700 at simplebus1 not configured
[ 1.0000040] /soc/hdmi@7ef05700 at simplebus1 not configured
[ 1.0000040] vchiq0 at simplebus1: BCM2835 VCHIQ
[ 1.0000040] /gpu at simplebus0 not configured
[ 1.0000040] sdhc1 at simplebus4: SDHC controller
[ 1.0000040] sdhc1: interrupting on GIC irq 158
[ 1.0000040] armpmu0 at simplebus0: Performance Monitor Unit
[ 1.0000040] gpioleds0 at simplebus0: ACT
[ 1.0000040] /soc/rng@7e104000 at simplebus1 not configured
[ 1.0000040] genfb0 at simplebus5Vendor: [MEL] Mitsubishi Elec
[ 1.0000040] Product: [4853] RDT233WX
[ 1.0000040] Serial number: 15201312AJ
[ 1.0000040] Manufactured 2011 Week 20
[ 1.0000040] EDID Version 1.3
[ 1.0000040] EDID Comment:
[ 1.0000040] Video Input: 80
[ 1.0000040] Digital
[ 1.0000040] Gamma: 2.20
[ 1.0000040] Max Size: 51 cm x 29 cm
[ 1.0000040] Features: ea
[ 1.0000040] DPMS standby
[ 1.0000040] DPMS suspend
[ 1.0000040] DPMS active-off
[ 1.0000040] RGB
[ 1.0000040] Preferred timing
[ 1.0000040] Chroma Info:
[ 1.0000040] Red X: 0.633
[ 1.0000040] Red Y: 0.633
[ 1.0000040] Grn X: 0.303
[ 1.0000040] Grn Y: 0.626
[ 1.0000040] Blu X: 0.150
[ 1.0000040] Blu Y: 0.068
[ 1.0000040] Wht X: 0.313
[ 1.0000040] Wht Y: 0.329
[ 1.0000040] Range:
[ 1.0000040] Horizontal: 31 - 82 kHz
[ 1.0000040] Vertical: 56 - 75 Hz
[ 1.0000040] Max Dot Clock: 160 MHz
[ 1.0000040] GTF2 hfreq: 15841
[ 1.0000040] GTF2 C: 0
[ 1.0000040] GTF2 M: 856
[ 1.0000040] GTF2 J: 28536
[ 1.0000040] GTF2 K: 32820
[ 1.0000040] Video modes:
[ 1.0000040] 720x400 @ 70Hz (28320 738 846 900 412 414 449 -H +V)
[ 1.0000040] 640x480 @ 60Hz (25175 656 752 800 490 492 525 -H -V)
[ 1.0000040] 640x480 @ 73Hz (31500 664 704 832 489 492 520 -H -V)
[ 1.0000040] 640x480 @ 75Hz (31500 656 720 840 481 484 500 -H -V)
[ 1.0000040] 800x600 @ 56Hz (36000 824 896 1024 601 603 625 +H +V)
[ 1.0000040] 800x600 @ 60Hz (40000 840 968 1056 601 605 628 +H +V)
[ 1.0000040] 800x600 @ 72Hz (50000 856 976 1040 637 643 666 +H +V)
[ 1.0000040] 800x600 @ 75Hz (49500 816 896 1056 601 604 625 +H +V)
[ 1.0000040] 832x624 @ 75Hz (57284 864 928 1152 625 628 667 -H -V)
[ 1.0000040] 1024x768 @ 60Hz (65000 1048 1184 1344 771 777 806 -H -V)
[ 1.0000040] 1024x768 @ 70Hz (75000 1048 1184 1328 771 777 806 -H -V)
[ 1.0000040] 1024x768 @ 75Hz (78750 1040 1136 1312 769 772 800 +H +V)
[ 1.0000040] 1280x1024 @ 75Hz (135000 1296 1440 1688 1025 1028 1066 +H +V)
[ 1.0000040] 1152x864 @ 75Hz (108000 1216 1344 1600 865 868 900 +H +V)
[ 1.0000040] 1280x1024 @ 60Hz (108000 1328 1440 1688 1025 1028 1066 +H +V)
[ 1.0000040] 1280x960 @ 75Hz (129856 1368 1504 1728 961 964 1002 +H +V)
[ 1.0000040] 1360x765 @ 60Hz (84395 1424 1568 1776 766 769 792 +H +V)
[ 1.0000040] 1600x900 @ 60Hz (118996 1696 1864 2128 901 904 932 +H +V)
[ 1.0000040] 1680x1050 @ 60Hz (147140 1784 1968 2256 1051 1054 1087 +H +V)
[ 1.0000040] 1920x1080 @ 60Hz (148500 2008 2052 2200 1084 1089 1125 +H +V)
[ 1.0000040] Preferred mode: 1920x1080 @ 60Hz
[ 1.0000040] Number of extension blocks: 1
[ 1.0000040] rpi_fb_init: addr = 0xfe402000 size = 8355840
[ 1.0000040] rpi_fb_init: depth = 32
[ 1.0000040] rpi_fb_init: pitch = 7680
[ 1.0000040] rpi_fb_init: width = 1920 height = 1080
[ 1.0000040] rpi_fb_init: vwidth = 1920 vheight = 1080
[ 1.0000040] : Simple Framebuffer (1920x1080 32-bpp @ 0x3e402000)
[ 1.0000040] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[ 1.0000040] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000040] cpu_hatch(cpu3): vectorscpu_hatch(cpu2): vectors vbar=0x8009e8c0 vbar=0x8009e8c0 stacks stacks tlbcpu_hatch(cpu1): vectors tlb md(0x800821ac) md(0x800821ac) vbar=0x8009e8c0 interrupts interrupts done!
[ 1.2180206] done!
[ 1.2350259] stacks tlb md(0x800821ac) interrupts done!
[ 1.2560323] sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[ 1.2830401] sdmmc0 at sdhc0 slot 0
[ 1.3040465] usb0 at dwctwo0: USB revision 2.0
[ 1.3260526] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[ 1.3630629] sdmmc1 at sdhc1 slot 0
[ 1.4060751] armpmu0: interrupting on GIC irq 48
[ 1.4110761] armpmu0: interrupting on GIC irq 49
[ 1.4160774] armpmu0: interrupting on GIC irq 50
[ 1.4210787] armpmu0: interrupting on GIC irq 51
[ 1.4300810] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.5851482] sdmmc1: SD card status: 4-bit, C10, U1, V10, A1
[ 1.5901491] ld1 at sdmmc1: <0x02:0x544d:SA32G:0x83:0x2ba2b2a9:0x19b>
[ 1.5961506] ld1: 29818 MB, 7572 cyl, 128 head, 63 sec, 512 bytes/sect x 61067264 sectors (0 bytes/physsect)
[ 1.6281628] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[ 1.6932229] sdmmc0: 4-bit width, 50.000 MHz
[ 1.6972237] sdmmc0: SDIO function
[ 1.7002243] bwfm0 at sdmmc0 function 1
[ 1.7062256] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[ 1.7142276] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function 3 not configured
[ 1.7252305] swwdog0: software watchdog initialized
[ 1.7572441] WARNING: 7 errors while detecting hardware; check system log.
[ 1.7635139] boot device: ld1
[ 1.7674219] root on ld1a dumps on ld1b
[ 1.7723518] root file system type: ffs
[ 1.7781820] kern.module.path=/stand/evbarm/11.0/modules
[ 1.7836654] WARNING: no TOD clock present
[ 1.7836654] vchiq0: interrupting on GIC irq 66
[ 1.7877194] WARNING: using filesystem time
[ 1.7963583] WARNING: CHECK AND RESET THE DATE!
[ 1.8008503] vcaudio0 at vchiq0: auds
[ 1.8068519] audio0 at vcaudio0: playback
[ 1.8108522] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback
[ 1.8198546] spkr0 at audio0: PC Speaker (synthesized)
[ 1.8248557] wsbell at spkr0 not configured
[ 1.9589014] entropy: best effort
[ 3.1631814] bwfm0: CHIPACTIVE
[ 3.2632076] bwfm0: address 88:a2:9e:4f:6b:39
[ 3.2674851] bwfm0: wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment