tthtlc · August 25, 2019 16:51
diff --git a/sockit_bootup_dmesg.txt b/sockit_bootup_dmesg.txt
 U-Boot SPL 2013.01.01 (Sep 22 2014 - 15:43:31)
 BOARD : Terasic SoCKit Version D Board
 ################################################################################
 ##################################=                                           =#
 ########=-=#######################=                                     --    =#
 ######-   =#######################=                        ####-    =######   =#
 ######-   ###############- -=##=##=                        ####-   ########   =#
 ####=       =##-     -###       ##=   -#######    ######   ####-  #####-  -   =#
 ####        ##   ###   ##      -##=   -=--=###=  ####==#   ####-  ####        =#
 ######-   ###-  ##-  -###    =####=   =====###=  ####-     ####   ####        =#
 ######-   ###      =#####    #####=  ####-=###=    -=###-  ####-  #####       =#
 ######-    -#=     -  =##    #####=  #### -###=  #=-=####  ####-   ########-  ##
 #######    =##=        ##    #####=  -########=  #######   ####-    =######   =#
 #########==######====####==#######=     -         ---      --          ----   =#
 ##################################=                                           =#
 ################################################################################
 BOARD : Terasic SoCKit Version D Board
 CLOCK: EOSC1 clock 25000 KHz
 CLOCK: EOSC2 clock 25000 KHz
 CLOCK: F2S_SDR_REF clock 0 KHz
 CLOCK: F2S_PER_REF clock 0 KHz
 CLOCK: MPU clock 925 MHz
 CLOCK: DDR clock 400 MHz
 CLOCK: UART clock 100000 KHz
 CLOCK: MMC clock 50000 KHz
 CLOCK: QSPI clock 370000 KHz
 SDRAM: Initializing MMR registers
 SDRAM: Calibrating PHY
 SEQ.C: Preparing to start memory calibration
 SEQ.C: CALIBRATION PASSED
 SDRAM: 1024 MiB
 ALTERA DWMMC: 0


 U-Boot 2013.01.01 (Aug 08 2014 - 10:46:23)

 CPU   : Altera SOCFPGA Platform
 BOARD : Altera SOCFPGA Cyclone V Board
 I2C:   ready
 DRAM:  1 GiB
 MMC:   ALTERA DWMMC: 0
 In:    serial
 Out:   serial
 Err:   serial
 Skipped ethaddr assignment due to invalid EMAC address in EEPROM
 Net:   mii0
 Warning: failed to set MAC address

 Hit any key to stop autoboot:  0 
 reading u-boot.scr
 ** Unable to read file u-boot.scr **
 Optional boot script not found. Continuing to boot normally
 reading zImage
 3834632 bytes read in 338 ms (10.8 MiB/s)
 reading socfpga.dtb
 17433 bytes read in 6 ms (2.8 MiB/s)
 ## Starting application at 0x3FF7D524 ...
 ## Application terminated, rc = 0x0
 ## Flattened Device Tree blob at 00000100
   Booting using the fdt blob at 0x00000100
   Loading Device Tree to 03ff8000, end 03fff418 ... OK

 Starting kernel ...

 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpuset
 Linux version 3.12.0-00307-g507abb4-dirty (root@matthew) (gcc version 4.6.3 (Sourcery CodeBench Lit4
 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine: Altera SOCFPGA, model: Altera SOCFPGA Cyclone V
 Memory policy: ECC disabled, Data cache writealloc
 PERCPU: Embedded 8 pages/cpu @80fdd000 s11328 r8192 d13248 u32768
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
 Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
 Memory: 1031436K/1048576K available (5668K kernel code, 254K rwdata, 1432K rodata, 347K init, 256K )
 Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x806f75ac   (7102 kB)
      .init : 0x806f8000 - 0x8074ec40   ( 348 kB)
      .data : 0x80750000 - 0x8078f870   ( 255 kB)
       .bss : 0x8078f870 - 0x807cf99c   ( 257 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
 Console: colour dummy device 80x30
 Calibrating delay loop... 1836.64 BogoMIPS (lpj=9183232)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 512
 CPU: Testing write buffer coherency: ok
 ftrace: allocating 17868 entries in 53 pages
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80526bc0 - 0x80526c18
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 Brought up 2 CPUs
 SMP: Total of 2 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
 NET: Registered protocol family 16
 fpga bridge driver
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 L310 cache controller enabled
 l2x0: 8 ways, CACHE_ID 0x410030c9, AUX_CTRL 0x32460000, Cache size: 512 kB
 syscon fffef000.l2-cache: regmap [mem 0xfffef000-0xfffeffff] registered
 syscon ffd05000.rstmgr: regmap [mem 0xffd05000-0xffd05fff] registered
 syscon ffc25000.sdrctl: regmap [mem 0xffc25000-0xffc25fff] registered
 syscon ff800000.l3regs: regmap [mem 0xff800000-0xff800fff] registered
 syscon ffd08000.sysmgr: regmap [mem 0xffd08000-0xffd0bfff] registered
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 altera_hps2fpga_bridge fpgabridge.2: fpga bridge [hps2fpga] registered as device hps2fpga
 altera_hps2fpga_bridge fpgabridge.2: init-val not specified
 altera_hps2fpga_bridge fpgabridge.3: fpga bridge [lshps2fpga] registered as device lwhps2fpga
 altera_hps2fpga_bridge fpgabridge.3: init-val not specified
 altera_hps2fpga_bridge fpgabridge.4: fpga bridge [fpga2hps] registered as device fpga2hps
 altera_hps2fpga_bridge fpgabridge.4: init-val not specified
 bio: create slab <bio-0> at 0
 FPGA Mangager framework driver
 SCSI subsystem initialized
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
 PTP clock support registered
 Switched to clocksource timer1
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
 TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
 RPC: Registered named UNIX socket transport module.
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
 arm-pmu arm-pmu: PMU:CTI successfully enabled
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
 NTFS driver 2.1.30 [Flags: R/W].
 jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
 msgmni has been set to 2014
 io scheduler noop registered (default)
 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 194, base_baud = 6250000) is a 16550A
 console [ttyS0] enabled
 altera_fpga_manager ff706000.fpgamgr: fpga manager [Altera FPGA Manager] registered as minor 0
 brd: module loaded
 cadence-qspi ff705000.spi: DMA NOT enabled
 cadence-qspi ff705000.spi: master is unqueued, this is deprecated
 m25p80 spi2.0: found n25q00, expected s25fl512s
 m25p80 spi2.0: n25q00 (131072 Kbytes)
 2 ofpart partitions found on MTD device spi2.0
 Creating 2 MTD partitions on "spi2.0":
 0x000000000000-0x000000800000 : "Flash 0 Raw Data"
 0x000000800000-0x000008000000 : "Flash 0 jffs2 Filesystem"
 cadence-qspi ff705000.spi: Cadence QSPI controller driver
 dw_spi_mmio fff00000.spi: master is unqueued, this is deprecated
 dw_spi_mmio fff01000.spi: master is unqueued, this is deprecated
 CAN device driver interface
 c_can_platform ffc00000.d_can: invalid resource
 c_can_platform ffc00000.d_can: control memory is not used for raminit
 c_can_platform ffc00000.d_can: c_can_platform device registered (regs=c08e6000, irq=163)
 stmmac - user ID: 0x10, Synopsys ID: 0x37
 Ring mode enabled
 DMA HW capability register supported
 Enhanced/Alternate descriptors
        Enabled extended descriptors
 RX Checksum Offload Engine supported (type 2)
 TX Checksum insertion supported
 Enable RX Mitigation via HW Watchdog Timer
 libphy: stmmac: probed
 eth0: PHY ID 00221611 at 1 IRQ 0 (stmmac-0:01) active
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 i2c /dev entries driver
 Synopsys Designware Multimedia Card Interface Driver
 dwmmc_socfpga ff704000.dwmmc0: Using internal DMA controller.
 dwmmc_socfpga ff704000.dwmmc0: Version ID is 240a
 dwmmc_socfpga ff704000.dwmmc0: DW MMC controller at irq 171, 32 bit host data width, 1024 deep fifo
 mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
 dwmmc_socfpga ff704000.dwmmc0: 1 slots initialized
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
 mmc0: new high speed SDHC card at address 6b0f
 mmcblk0: mmc0:6b0f SD04G 3.75 GiB 
 mmcblk0: p1 p2 p3
 dwc2 ffb40000.usb: DWC OTG Controller
 dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1
 dwc2 ffb40000.usb: irq 160, io mem 0x00000000
 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 usb usb1: Product: DWC OTG Controller
 usb usb1: Manufacturer: Linux 3.12.0-00307-g507abb4-dirty dwc2_hsotg
 usb usb1: SerialNumber: ffb40000.usb
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 oprofile: using arm/armv7-ca9
 TCP: cubic registered
 NET: Registered protocol family 10
 sit: IPv6 over IPv4 tunneling driver
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20120528 t)
 can: netlink gateway (rev 20130117) max_hops=1
 8021q: 802.1Q VLAN Support v1.8
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 kjournald starting.  Commit interval 5 seconds
 EXT3-fs (mmcblk0p2): using internal journal
 EXT3-fs (mmcblk0p2): recovery complete
 EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
 VFS: Mounted root (ext3 filesystem) on device 179:2.
 devtmpfs: mounted
 Freeing unused kernel memory: 344K (806f8000 - 8074e000)
 INIT: version 2.88 booting
 Starting Bootlog daemon: bootlogd.
 Configuring network interfaces... eth0: device MAC address 4a:61:6e:e1:ce:bd
 udhcpc (v1.20.2) started
 Sending discover...
 Sending discover...
 Sending discover...
 No lease, failing
 Starting portmap daemon...
 Sat Sep 28 04:37:00 UTC 2013
 INIT: Entering runlevel: 5
 Starting OpenBSD Secure Shell server: sshd
 done.
 Starting syslogd/klogd: done
 Starting Lighttpd Web Server: lighttpd.
 Starting blinking LED server
 Stopping Bootlog daemon: bootlogd.

 ################################################################################
 ##################################=                                           =#
 ########=-=#######################=                                     --    =#
 ######-   =#######################=                        ####-    =######   =#
 ######-   ###############- -=##=##=                        ####-   ########   =#
 ####=       =##-     -###       ##=   -#######    ######   ####-  #####-  -   =#
 ####        ##   ###   ##      -##=   -=--=###=  ####==#   ####-  ####        =#
 ######-   ###-  ##-  -###    =####=   =====###=  ####-     ####   ####        =#
 ######-   ###      =#####    #####=  ####-=###=    -=###-  ####-  #####       =#
 ######-    -#=     -  =##    #####=  #### -###=  #=-=####  ####-   ########-  ##
 #######    =##=        ##    #####=  -########=  #######   ####-    =######   =#
 #########==######====####==#######=     -         ---      --          ----   =#
 ##################################=                                           =#
 ################################################################################
	U-Boot SPL 2013.01.01 (Sep 22 2014 - 15:43:31)
	BOARD : Terasic SoCKit Version D Board
	################################################################################
	##################################= =#
	########=-=#######################= -- =#
	######- =#######################= ####- =###### =#
	######- ###############- -=##=##= ####- ######## =#
	####= =##- -### ##= -####### ###### ####- #####- - =#
	#### ## ### ## -##= -=--=###= ####==# ####- #### =#
	######- ###- ##- -### =####= =====###= ####- #### #### =#
	######- ### =##### #####= ####-=###= -=###- ####- ##### =#
	######- -#= - =## #####= #### -###= #=-=#### ####- ########- ##
	####### =##= ## #####= -########= ####### ####- =###### =#
	#########==######====####==#######= - --- -- ---- =#
	##################################= =#
	################################################################################
	BOARD : Terasic SoCKit Version D Board
	CLOCK: EOSC1 clock 25000 KHz
	CLOCK: EOSC2 clock 25000 KHz
	CLOCK: F2S_SDR_REF clock 0 KHz
	CLOCK: F2S_PER_REF clock 0 KHz
	CLOCK: MPU clock 925 MHz
	CLOCK: DDR clock 400 MHz
	CLOCK: UART clock 100000 KHz
	CLOCK: MMC clock 50000 KHz
	CLOCK: QSPI clock 370000 KHz
	SDRAM: Initializing MMR registers
	SDRAM: Calibrating PHY
	SEQ.C: Preparing to start memory calibration
	SEQ.C: CALIBRATION PASSED
	SDRAM: 1024 MiB
	ALTERA DWMMC: 0


	U-Boot 2013.01.01 (Aug 08 2014 - 10:46:23)

	CPU : Altera SOCFPGA Platform
	BOARD : Altera SOCFPGA Cyclone V Board
	I2C: ready
	DRAM: 1 GiB
	MMC: ALTERA DWMMC: 0
	In: serial
	Out: serial
	Err: serial
	Skipped ethaddr assignment due to invalid EMAC address in EEPROM
	Net: mii0
	Warning: failed to set MAC address

	Hit any key to stop autoboot: 0
	reading u-boot.scr
	Unable to read file u-boot.scr
	Optional boot script not found. Continuing to boot normally
	reading zImage
	3834632 bytes read in 338 ms (10.8 MiB/s)
	reading socfpga.dtb
	17433 bytes read in 6 ms (2.8 MiB/s)
	## Starting application at 0x3FF7D524 ...
	## Application terminated, rc = 0x0
	## Flattened Device Tree blob at 00000100
	Booting using the fdt blob at 0x00000100
	Loading Device Tree to 03ff8000, end 03fff418 ... OK

	Starting kernel ...

	Booting Linux on physical CPU 0x0
	Initializing cgroup subsys cpuset
	Linux version 3.12.0-00307-g507abb4-dirty (root@matthew) (gcc version 4.6.3 (Sourcery CodeBench Lit4
	CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
	CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
	Machine: Altera SOCFPGA, model: Altera SOCFPGA Cyclone V
	Memory policy: ECC disabled, Data cache writealloc
	PERCPU: Embedded 8 pages/cpu @80fdd000 s11328 r8192 d13248 u32768
	Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
	Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
	PID hash table entries: 4096 (order: 2, 16384 bytes)
	Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
	Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
	Memory: 1031436K/1048576K available (5668K kernel code, 254K rwdata, 1432K rodata, 347K init, 256K )
	Virtual kernel memory layout:
	vector : 0xffff0000 - 0xffff1000 ( 4 kB)
	fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
	vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
	lowmem : 0x80000000 - 0xc0000000 (1024 MB)
	modules : 0x7f000000 - 0x80000000 ( 16 MB)
	.text : 0x80008000 - 0x806f75ac (7102 kB)
	.init : 0x806f8000 - 0x8074ec40 ( 348 kB)
	.data : 0x80750000 - 0x8078f870 ( 255 kB)
	.bss : 0x8078f870 - 0x807cf99c ( 257 kB)
	SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
	Hierarchical RCU implementation.
	NR_IRQS:16 nr_irqs:16 16
	sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
	Console: colour dummy device 80x30
	Calibrating delay loop... 1836.64 BogoMIPS (lpj=9183232)
	pid_max: default: 32768 minimum: 301
	Mount-cache hash table entries: 512
	CPU: Testing write buffer coherency: ok
	ftrace: allocating 17868 entries in 53 pages
	CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
	Setting up static identity map for 0x80526bc0 - 0x80526c18
	CPU1: Booted secondary processor
	CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
	Brought up 2 CPUs
	SMP: Total of 2 processors activated.
	CPU: All CPU(s) started in SVC mode.
	devtmpfs: initialized
	VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
	NET: Registered protocol family 16
	fpga bridge driver
	DMA: preallocated 256 KiB pool for atomic coherent allocations
	L310 cache controller enabled
	l2x0: 8 ways, CACHE_ID 0x410030c9, AUX_CTRL 0x32460000, Cache size: 512 kB
	syscon fffef000.l2-cache: regmap [mem 0xfffef000-0xfffeffff] registered
	syscon ffd05000.rstmgr: regmap [mem 0xffd05000-0xffd05fff] registered
	syscon ffc25000.sdrctl: regmap [mem 0xffc25000-0xffc25fff] registered
	syscon ff800000.l3regs: regmap [mem 0xff800000-0xff800fff] registered
	syscon ffd08000.sysmgr: regmap [mem 0xffd08000-0xffd0bfff] registered
	hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
	hw-breakpoint: maximum watchpoint size is 4 bytes.
	altera_hps2fpga_bridge fpgabridge.2: fpga bridge [hps2fpga] registered as device hps2fpga
	altera_hps2fpga_bridge fpgabridge.2: init-val not specified
	altera_hps2fpga_bridge fpgabridge.3: fpga bridge [lshps2fpga] registered as device lwhps2fpga
	altera_hps2fpga_bridge fpgabridge.3: init-val not specified
	altera_hps2fpga_bridge fpgabridge.4: fpga bridge [fpga2hps] registered as device fpga2hps
	altera_hps2fpga_bridge fpgabridge.4: init-val not specified
	bio: create slab <bio-0> at 0
	FPGA Mangager framework driver
	SCSI subsystem initialized
	usbcore: registered new interface driver usbfs
	usbcore: registered new interface driver hub
	usbcore: registered new device driver usb
	pps_core: LinuxPPS API ver. 1 registered
	pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
	PTP clock support registered
	Switched to clocksource timer1
	NET: Registered protocol family 2
	TCP established hash table entries: 8192 (order: 4, 65536 bytes)
	TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
	TCP: Hash tables configured (established 8192 bind 8192)
	TCP: reno registered
	UDP hash table entries: 512 (order: 2, 16384 bytes)
	UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
	NET: Registered protocol family 1
	RPC: Registered named UNIX socket transport module.
	RPC: Registered udp transport module.
	RPC: Registered tcp transport module.
	RPC: Registered tcp NFSv4.1 backchannel transport module.
	hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
	arm-pmu arm-pmu: PMU:CTI successfully enabled
	NFS: Registering the id_resolver key type
	Key type id_resolver registered
	Key type id_legacy registered
	NTFS driver 2.1.30 [Flags: R/W].
	jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
	msgmni has been set to 2014
	io scheduler noop registered (default)
	Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
	ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 194, base_baud = 6250000) is a 16550A
	console [ttyS0] enabled
	altera_fpga_manager ff706000.fpgamgr: fpga manager [Altera FPGA Manager] registered as minor 0
	brd: module loaded
	cadence-qspi ff705000.spi: DMA NOT enabled
	cadence-qspi ff705000.spi: master is unqueued, this is deprecated
	m25p80 spi2.0: found n25q00, expected s25fl512s
	m25p80 spi2.0: n25q00 (131072 Kbytes)
	2 ofpart partitions found on MTD device spi2.0
	Creating 2 MTD partitions on "spi2.0":
	0x000000000000-0x000000800000 : "Flash 0 Raw Data"
	0x000000800000-0x000008000000 : "Flash 0 jffs2 Filesystem"
	cadence-qspi ff705000.spi: Cadence QSPI controller driver
	dw_spi_mmio fff00000.spi: master is unqueued, this is deprecated
	dw_spi_mmio fff01000.spi: master is unqueued, this is deprecated
	CAN device driver interface
	c_can_platform ffc00000.d_can: invalid resource
	c_can_platform ffc00000.d_can: control memory is not used for raminit
	c_can_platform ffc00000.d_can: c_can_platform device registered (regs=c08e6000, irq=163)
	stmmac - user ID: 0x10, Synopsys ID: 0x37
	Ring mode enabled
	DMA HW capability register supported
	Enhanced/Alternate descriptors
	Enabled extended descriptors
	RX Checksum Offload Engine supported (type 2)
	TX Checksum insertion supported
	Enable RX Mitigation via HW Watchdog Timer
	libphy: stmmac: probed
	eth0: PHY ID 00221611 at 1 IRQ 0 (stmmac-0:01) active
	usbcore: registered new interface driver usb-storage
	mousedev: PS/2 mouse device common for all mice
	i2c /dev entries driver
	Synopsys Designware Multimedia Card Interface Driver
	dwmmc_socfpga ff704000.dwmmc0: Using internal DMA controller.
	dwmmc_socfpga ff704000.dwmmc0: Version ID is 240a
	dwmmc_socfpga ff704000.dwmmc0: DW MMC controller at irq 171, 32 bit host data width, 1024 deep fifo
	mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
	dwmmc_socfpga ff704000.dwmmc0: 1 slots initialized
	ledtrig-cpu: registered to indicate activity on CPUs
	usbcore: registered new interface driver usbhid
	usbhid: USB HID core driver
	mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
	mmc0: new high speed SDHC card at address 6b0f
	mmcblk0: mmc0:6b0f SD04G 3.75 GiB
	mmcblk0: p1 p2 p3
	dwc2 ffb40000.usb: DWC OTG Controller
	dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1
	dwc2 ffb40000.usb: irq 160, io mem 0x00000000
	usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
	usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	usb usb1: Product: DWC OTG Controller
	usb usb1: Manufacturer: Linux 3.12.0-00307-g507abb4-dirty dwc2_hsotg
	usb usb1: SerialNumber: ffb40000.usb
	hub 1-0:1.0: USB hub found
	hub 1-0:1.0: 1 port detected
	oprofile: using arm/armv7-ca9
	TCP: cubic registered
	NET: Registered protocol family 10
	sit: IPv6 over IPv4 tunneling driver
	NET: Registered protocol family 17
	NET: Registered protocol family 15
	can: controller area network core (rev 20120528 abi 9)
	NET: Registered protocol family 29
	can: raw protocol (rev 20120528)
	can: broadcast manager protocol (rev 20120528 t)
	can: netlink gateway (rev 20130117) max_hops=1
	8021q: 802.1Q VLAN Support v1.8
	Key type dns_resolver registered
	ThumbEE CPU extension supported.
	Registering SWP/SWPB emulation handler
	kjournald starting. Commit interval 5 seconds
	EXT3-fs (mmcblk0p2): using internal journal
	EXT3-fs (mmcblk0p2): recovery complete
	EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
	VFS: Mounted root (ext3 filesystem) on device 179:2.
	devtmpfs: mounted
	Freeing unused kernel memory: 344K (806f8000 - 8074e000)
	INIT: version 2.88 booting
	Starting Bootlog daemon: bootlogd.
	Configuring network interfaces... eth0: device MAC address 4a:61:6e:e1:ce:bd
	udhcpc (v1.20.2) started
	Sending discover...
	Sending discover...
	Sending discover...
	No lease, failing
	Starting portmap daemon...
	Sat Sep 28 04:37:00 UTC 2013
	INIT: Entering runlevel: 5
	Starting OpenBSD Secure Shell server: sshd
	done.
	Starting syslogd/klogd: done
	Starting Lighttpd Web Server: lighttpd.
	Starting blinking LED server
	Stopping Bootlog daemon: bootlogd.

	################################################################################
	##################################= =#
	########=-=#######################= -- =#
	######- =#######################= ####- =###### =#
	######- ###############- -=##=##= ####- ######## =#
	####= =##- -### ##= -####### ###### ####- #####- - =#
	#### ## ### ## -##= -=--=###= ####==# ####- #### =#
	######- ###- ##- -### =####= =====###= ####- #### #### =#
	######- ### =##### #####= ####-=###= -=###- ####- ##### =#
	######- -#= - =## #####= #### -###= #=-=#### ####- ########- ##
	####### =##= ## #####= -########= ####### ####- =###### =#
	#########==######====####==#######= - --- -- ---- =#
	##################################= =#
	################################################################################