Created
March 27, 2018 04:54
-
-
Save tthtlc/c7e267d7fbf95d3d366146233b28554f to your computer and use it in GitHub Desktop.
parallela's parabuntu image download and run
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
sudo minicom -s | |
Welcome to minicom 2.7 | |
OPTIONS: I18n | |
Compiled on Feb 7 2016, 13:37:27. | |
Port /dev/ttyUSB0, 11:44:47 | |
Press CTRL-A Z for help on special keys | |
U-Boot 2012.10-00003-g792c31c (Jan 03 2014 - 12:24:08) | |
I2C: ready | |
DRAM: 992 MiB | |
WARNING: Caches not enabled | |
MMC: SDHCI: 0 | |
SF: Detected N25Q128 with page size 64 KiB, total 16 MiB | |
In: serial | |
Out: serial | |
Err: serial | |
Net: zynq_gem | |
Hit any key to stop autoboot: 0 | |
Configuring PL and Booting Linux... | |
Device: SDHCI | |
Manufacturer ID: 3 | |
OEM: 5054 | |
Name: SL16G | |
Tran Speed: 50000000 | |
Rd Block Len: 512 | |
SD version 2.0 | |
High Capacity: Yes | |
Capacity: 14.5 GiB | |
Bus Width: 4-bit | |
reading parallella.bit.bin | |
2083744 bytes read | |
reading uImage | |
4154824 bytes read | |
reading devicetree.dtb | |
13749 bytes read | |
## Booting kernel from Legacy Image at 03000000 ... | |
Image Name: Linux-4.6.0+ | |
Image Type: ARM Linux Kernel Image (uncompressed) | |
Data Size: 4154760 Bytes = 4 MiB | |
Load Address: 00008000 | |
Entry Point: 00008000 | |
Verifying Checksum ... OK | |
## Flattened Device Tree blob at 02a00000 | |
Booting using the fdt blob at 0x02a00000 | |
Loading Kernel Image ... OK | |
OK | |
Loading Device Tree to 1fff9000, end 1ffff5b4 ... OK | |
Starting kernel ... | |
Booting Linux on physical CPU 0x0 | |
Linux version 4.6.0+ (esim@adapteva-dev) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #1 SMP PREEMPT Wed Dec 7 6 | |
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d | |
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
Machine model: Adapteva Parallella Board with headless bitstream | |
cma: Reserved 128 MiB at 0x36000000 | |
Memory policy: Data cache writealloc | |
percpu: Embedded 12 pages/cpu @ef810000 s19392 r8192 d21568 u49152 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252416 | |
Kernel command line: console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait | |
PID hash table entries: 4096 (order: 2, 16384 bytes) | |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
Memory: 867280K/1015808K available (5652K kernel code, 279K rwdata, 2132K rodata, 260K init, 159K bss, 17456K reserved, 131072K cm) | |
Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) | |
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) | |
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
.text : 0xc0008000 - 0xc07a25f0 (7786 kB) | |
.init : 0xc07a3000 - 0xc07e4000 ( 260 kB) | |
.data : 0xc07e4000 - 0xc0829fa0 ( 280 kB) | |
.bss : 0xc0829fa0 - 0xc0851c44 ( 160 kB) | |
Preemptible hierarchical RCU implementation. | |
Build-time adjustment of leaf fanout to 32. | |
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. | |
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 | |
NR_IRQS:16 nr_irqs:16 16 | |
slcr mapped to f0800000 | |
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 | |
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 | |
L2C-310 erratum 769419 enabled | |
L2C-310 enabling early BRESP for Cortex-A9 | |
L2C-310 full line of zeros enabled for Cortex-A9 | |
L2C-310 ID prefetch enabled, offset 1 lines | |
L2C-310 dynamic clock gating enabled, standby mode enabled | |
L2C-310 cache controller enabled, 8 ways, 512 kB | |
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 | |
zynq_clock_init: clkc starts at f0800100 | |
Zynq clock init | |
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns | |
sched_clock: 16 bits at 54kHz, resolution 18432ns, wraps every 603975816ns | |
timer #0 at f0808000, irq=16 | |
Console: colour dummy device 80x30 | |
Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
CPU: Testing write buffer coherency: ok | |
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
Setting up static identity map for 0x8280 - 0x82d8 | |
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
Brought up 2 CPUs | |
SMP: Total of 2 processors activated (2664.03 BogoMIPS). | |
CPU: All CPU(s) started in SVC mode. | |
devtmpfs: initialized | |
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
pinctrl core: initialized pinctrl subsystem | |
NET: Registered protocol family 16 | |
DMA: preallocated 256 KiB pool for atomic coherent allocations | |
cpuidle: using governor ladder | |
zynq-gpio e000a000.gpio: could not find pctldev for node /amba/slcr@f8000000/pinctrl@700/gpio0-default, deferring probe | |
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
hw-breakpoint: maximum watchpoint size is 4 bytes. | |
zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0880000 | |
zynq-pinctrl 700.pinctrl: zynq pinctrl initialized | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
media: Linux media interface: v0.10 | |
Linux video capture interface: v2.00 | |
pps_core: LinuxPPS API ver. 1 registered | |
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
PTP clock support registered | |
EDAC MC: Ver: 3.0.0 | |
Advanced Linux Sound Architecture Driver Initialized. | |
Bluetooth: Core ver 2.21 | |
NET: Registered protocol family 31 | |
Bluetooth: HCI device and connection manager initialized | |
Bluetooth: HCI socket layer initialized | |
Bluetooth: L2CAP socket layer initialized | |
Bluetooth: SCO socket layer initialized | |
clocksource: Switched to clocksource ttc_clocksource | |
NET: Registered protocol family 2 | |
TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
TCP: Hash tables configured (established 8192 bind 8192) | |
UDP hash table entries: 512 (order: 2, 16384 bytes) | |
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
NET: Registered protocol family 1 | |
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available | |
futex hash table entries: 512 (order: 3, 32768 bytes) | |
workingset: timestamp_bits=28 max_order=18 bucket_order=0 | |
fuse init (API version 7.24) | |
bounce: pool size: 64 pages | |
io scheduler noop registered | |
io scheduler deadline registered | |
io scheduler cfq registered (default) | |
Error: Driver 'mwipcore' is already registered, aborting... | |
dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 | |
dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 | |
e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 25, base_baud = 3125000) is a xuartps | |
console [ttyPS0] enabled | |
xdevcfg f8007000.devcfg: ioremap 0xf8007000 to f085e000 | |
[drm] Initialized drm 1.1.0 20060810 | |
brd: module loaded | |
loop: module loaded | |
zram: Added device: zram0 | |
zynq-qspi e000d000.spi: couldn't determine configuration info about dual memories. defaulting to single memory | |
m25p80 spi32766.0: SPI-NOR-UniqueID 100000233383001800280032301013cf5f | |
m25p80 spi32766.0: n25q128a13 (16384 Kbytes) | |
3 ofpart partitions found on MTD device spi32766.0 | |
Creating 3 MTD partitions on "spi32766.0": | |
0x000000000000-0x0000004e0000 : "boot" | |
0x0000004e0000-0x000000500000 : "bootenv" | |
0x000000ff0000-0x000001000000 : "version" | |
gpiod_set_value: invalid GPIO | |
libphy: MACB_mii_bus: probed | |
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 27 (04:4f:8b:00:20:f8) | |
Marvell 88E1318S e000b000.etherne:00: attached PHY driver [Marvell 88E1318S] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) | |
usbcore: registered new interface driver asix | |
usbcore: registered new interface driver ax88179_178a | |
usbcore: registered new interface driver cdc_ether | |
usbcore: registered new interface driver net1080 | |
usbcore: registered new interface driver cdc_subset | |
usbcore: registered new interface driver zaurus | |
usbcore: registered new interface driver cdc_ncm | |
aoe: AoE v85 initialised. | |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
usbcore: registered new interface driver usb-storage | |
usbcore: registered new interface driver usbserial | |
usbcore: registered new interface driver usbserial_generic | |
usbserial: USB Serial support registered for generic | |
usbcore: registered new interface driver ftdi_sio | |
usbserial: USB Serial support registered for FTDI USB Serial Device | |
e0002000.usb supply vbus not found, using dummy regulator | |
ci_hdrc ci_hdrc.0: unable to init phy: -110 | |
ci_hdrc: probe of ci_hdrc.0 failed with error -110 | |
e0003000.usb supply vbus not found, using dummy regulator | |
ci_hdrc ci_hdrc.1: unable to init phy: -110 | |
ci_hdrc: probe of ci_hdrc.1 failed with error -110 | |
mousedev: PS/2 mouse device common for all mice | |
i2c /dev entries driver | |
cdns-i2c e0004000.i2c: 100 kHz mmio e0004000 irq 22 | |
Xilinx Zynq CpuIdle Driver started | |
sdhci: Secure Digital Host Controller Interface driver | |
sdhci: Copyright(c) Pierre Ossman | |
sdhci-pltfm: SDHCI platform and OF driver helper | |
mmc0: SDHCI controller on e0101000.sdhci [e0101000.sdhci] using ADMA | |
ledtrig-cpu: registered to indicate activity on CPUs | |
hidraw: raw HID events driver (C) Jiri Kosina | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
usbcore: registered new interface driver snd-usb-audio | |
NET: Registered protocol family 10 | |
sit: IPv6 over IPv4 tunneling driver | |
NET: Registered protocol family 17 | |
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
Bluetooth: RFCOMM TTY layer initialized | |
Bluetooth: RFCOMM socket layer initialized | |
Bluetooth: RFCOMM ver 1.11 | |
Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
Bluetooth: BNEP filters: protocol multicast | |
Bluetooth: BNEP socket layer initialized | |
Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
Bluetooth: HIDP socket layer initialized | |
Registering SWP/SWPB emulation handler | |
hctosys: unable to open rtc device (rtc0) | |
mmc0: new high speed SDHC card at address 0007 | |
VDD_DSP: disabling | |
ALSA device list: | |
No soundcards found. | |
mmcblk0: mmc0:0007 SL16G 14.5 GiB | |
mmcblk0: p1 p2 | |
EXT4-fs (mmcblk0p2): recovery complete | |
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
VFS: Mounted root (ext4 filesystem) on device 179:2. | |
devtmpfs: mounted | |
Freeing unused kernel memory: 260K (c07a3000 - c07e4000) | |
This architecture does not have kernel memory protection. | |
random: systemd urandom read with 22 bits of entropy available | |
Welcome to Ubuntu 15.04! | |
Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or. | |
[ OK ] Reached target Swap. | |
[ OK ] Created slice Root Slice. | |
[ OK ] Listening on udev Control Socket. | |
[ OK ] Listening on Journal Socket. | |
[ OK ] Created slice User and Session Slice. | |
[ OK ] Listening on Delayed Shutdown Socket. | |
[ OK ] Listening on Journal Socket (/dev/log). | |
[ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
[ OK ] Reached target Remote File Systems (Pre). | |
[ OK ] Reached target Encrypted Volumes. | |
[ OK ] Created slice System Slice. | |
Starting Create list of required st... nodes for the current kernel... | |
[ OK ] Reached target Slices. | |
[ OK ] Created slice system-getty.slice. | |
Mounting Debug File System... | |
Starting Setup Virtual Console... | |
Starting Restore / save the current clock... | |
[ OK ] Listening on udev Kernel Socket. | |
Starting udev Coldplug all Devices... | |
Starting Increase datagram queue length... | |
Starting Remount Root and Kernel File Systems... | |
Starting Load Kernel Modules... | |
[ OK ] Created slice system-serial\x2dgetty.slice. | |
[ OK ] Started Create list of required sta...ce nodes for the current kernel. | |
[ OK ] Started Setup Virtual Console. | |
Starting Create Static Device Nodes in /dev... | |
[ OK ] Started Remount Root and Kernel File Systems. | |
[ OK ] Started Load Kernel Modules. | |
[ OK ] Mounted Debug File System. | |
[ OK ] Started Restore / save the current clock. | |
[ OK ] Started Increase datagram queue length. | |
[ OK ] Started Create Static Device Nodes in /dev. | |
[ OK ] Started udev Coldplug all Devices. | |
Starting udev Kernel Device Manager... | |
[ OK ] Listening on Syslog Socket. | |
Starting Journal Service... | |
Mounting FUSE Control File System... | |
Starting Apply Kernel Variables... | |
Starting Load/Save Random Seed... | |
[ OK ] Reached target Local File Systems (Pre). | |
[ OK ] Reached target Local File Systems. | |
[ OK ] Reached target Remote File Systems. | |
Starting Wait for all "auto" /etc/n... up for network-online.target... | |
Starting Tell Plymouth To Write Out Runtime Data... | |
Starting Set console keymap... | |
[ OK ] Mounted FUSE Control File System. | |
[ OK ] Started Tell Plymouth To Write Out Runtime Data. | |
[ OK ] Started Load/Save Random Seed. | |
Starting LSB: Raise network interfaces.... | |
[ OK ] Started Apply Kernel Variables. | |
[ OK ] Started Journal Service. | |
[ OK ] Started udev Kernel Device Manager. | |
Starting Copy rules generated while the root was ro... | |
[ OK ] Reached target Paths. | |
Starting Flush Journal to Persistent Storage... | |
[ OK ] Started Copy rules generated while the root was ro. | |
[ OK ] Started Set console keymap. | |
[ OK ] Started Flush Journal to Persistent Storage. | |
Starting Create Volatile Files and Directories... | |
[ OK ] Started Create Volatile Files and Directories. | |
[ OK ] Found device /dev/ttyPS0. | |
[ OK ] Reached target System Time Synchronized. | |
Starting Update UTMP about System Boot/Shutdown... | |
[ OK ] Created slice system-ifup.slice. | |
[ OK ] Started ifup for eth0. | |
Starting ifup for eth0... | |
[ OK ] Started Update UTMP about System Boot/Shutdown. | |
[ OK ] Started ifup for sit0. | |
Starting ifup for sit0... | |
[ OK ] Started LSB: Raise network interfaces.. | |
[ OK ] Reached target Network. | |
[ OK ] Reached target System Initialization. | |
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
[ OK ] Reached target Timers. | |
[ OK ] Listening on D-Bus System Message Bus Socket. | |
[ OK ] Reached target Sockets. | |
[ OK ] Reached target Basic System. | |
[ OK ] Started "Parallella Thermal Watchdog". | |
Starting "Parallella Thermal Watchdog"... | |
Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"... | |
[ OK ] Started Regular background program processing daemon. | |
Starting Regular background program processing daemon... | |
Starting Permit User Sessions... | |
Starting Initialize hardware monitoring sensors... | |
Starting /etc/rc.local Compatibility... | |
Starting Avahi mDNS/DNS-SD Stack... | |
Starting System Logging Service... | |
[ OK ] Started Deferred execution scheduler. | |
Starting Deferred execution scheduler... | |
Starting Login Service... | |
[ OK ] Started OpenBSD Secure Shell server. | |
Starting OpenBSD Secure Shell server... | |
Starting D-Bus System Message Bus... | |
[ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand". | |
[ OK ] Started Permit User Sessions. | |
[ OK ] Started /etc/rc.local Compatibility. | |
[ OK ] Started D-Bus System Message Bus. | |
[ OK ] Started Avahi mDNS/DNS-SD Stack. | |
[ OK ] Started Initialize hardware monitoring sensors. | |
[ OK ] Started System Logging Service. | |
[ OK ] Started Login Service. | |
[ OK ] Stopped LSB: Start NTP daemon. | |
Starting Wait for Plymouth Boot Screen to Quit... | |
Starting Terminate Plymouth Boot Screen... | |
[ OK ] Started Wait for Plymouth Boot Screen to Quit. | |
[ OK ] Started Terminate Plymouth Boot Screen. | |
[ OK ] Started Getty on tty1. | |
Starting Getty on tty1... | |
[ OK ] Started Serial Getty on ttyPS0. | |
Starting Serial Getty on ttyPS0... | |
[ OK ] Reached target Login Prompts. | |
Starting LSB: Start NTP daemon... | |
[ OK ] Started LSB: Start NTP daemon. | |
Ubuntu 15.04 parallella ttyPS0 | |
parallella login: root (automatic login) | |
Last login: Thu Jan 1 00:00:31 UTC 1970 on ttyPS0 | |
root@parallella:~# | |
root@parallella:~# df | |
Filesystem 1K-blocks Used Available Use% Mounted on | |
/dev/root 3461152 1885316 1380304 58% / | |
devtmpfs 433640 0 433640 0% /dev | |
tmpfs 499304 0 499304 0% /dev/shm | |
tmpfs 499304 6536 492768 2% /run | |
tmpfs 5120 0 5120 0% /run/lock | |
tmpfs 499304 0 499304 0% /sys/fs/cgroup | |
tmpfs 99864 0 99864 0% /run/user/0 | |
root@parallella:~# lsmod | |
Module Size Used by | |
epiphany 19123 0 | |
root@parallella:~# ifconfig | |
eth0 Link encap:Ethernet HWaddr 04:4f:8b:00:20:f8 | |
inet addr:10.11.12.13 Bcast:10.11.12.255 Mask:255.255.255.0 | |
UP BROADCAST MULTICAST MTU:1500 Metric:1 | |
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 | |
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 | |
collisions:0 txqueuelen:1000 | |
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) | |
Interrupt:27 Base address:0xb000 | |
lo Link encap:Local Loopback | |
inet addr:127.0.0.1 Mask:255.0.0.0 | |
inet6 addr: ::1/128 Scope:Host | |
UP LOOPBACK RUNNING MTU:65536 Metric:1 | |
RX packets:2628 errors:0 dropped:0 overruns:0 frame:0 | |
TX packets:2628 errors:0 dropped:0 overruns:0 carrier:0 | |
collisions:0 txqueuelen:1 | |
RX bytes:209742 (209.7 KB) TX bytes:209742 (209.7 KB) | |
root@parallella:~# ps -ef | |
UID PID PPID C STIME TTY TIME CMD | |
root 1 0 0 00:00 ? 00:00:02 /sbin/init earlyprintk | |
root 2 0 0 00:00 ? 00:00:00 [kthreadd] | |
root 3 2 0 00:00 ? 00:00:00 [ksoftirqd/0] | |
root 4 2 0 00:00 ? 00:00:00 [kworker/0:0] | |
root 5 2 0 00:00 ? 00:00:00 [kworker/0:0H] | |
root 6 2 0 00:00 ? 00:00:00 [kworker/u4:0] | |
root 7 2 0 00:00 ? 00:00:00 [rcu_preempt] | |
root 8 2 0 00:00 ? 00:00:00 [rcu_sched] | |
root 9 2 0 00:00 ? 00:00:00 [rcu_bh] | |
root 10 2 0 00:00 ? 00:00:00 [migration/0] | |
root 11 2 0 00:00 ? 00:00:00 [cpuhp/0] | |
root 12 2 0 00:00 ? 00:00:00 [cpuhp/1] | |
root 13 2 0 00:00 ? 00:00:00 [migration/1] | |
root 14 2 0 00:00 ? 00:00:00 [ksoftirqd/1] | |
root 16 2 0 00:00 ? 00:00:00 [kworker/1:0H] | |
root 17 2 0 00:00 ? 00:00:00 [kdevtmpfs] | |
root 18 2 0 00:00 ? 00:00:00 [netns] | |
root 279 2 0 00:00 ? 00:00:00 [khungtaskd] | |
root 280 2 0 00:00 ? 00:00:00 [oom_reaper] | |
root 281 2 0 00:00 ? 00:00:00 [writeback] | |
root 283 2 0 00:00 ? 00:00:00 [crypto] | |
root 285 2 0 00:00 ? 00:00:00 [bioset] | |
root 287 2 0 00:00 ? 00:00:00 [kblockd] | |
root 304 2 0 00:00 ? 00:00:00 [edac-poller] | |
root 335 2 0 00:00 ? 00:00:00 [watchdogd] | |
root 431 2 0 00:00 ? 00:00:00 [kswapd0] | |
root 432 2 0 00:00 ? 00:00:00 [vmstat] | |
root 433 2 0 00:00 ? 00:00:00 [kworker/1:1] | |
root 471 2 0 00:00 ? 00:00:00 [bioset] | |
root 472 2 0 00:00 ? 00:00:00 [bioset] | |
root 473 2 0 00:00 ? 00:00:00 [bioset] | |
root 474 2 0 00:00 ? 00:00:00 [bioset] | |
root 475 2 0 00:00 ? 00:00:00 [bioset] | |
root 476 2 0 00:00 ? 00:00:00 [bioset] | |
root 477 2 0 00:00 ? 00:00:00 [bioset] | |
root 478 2 0 00:00 ? 00:00:00 [bioset] | |
root 479 2 0 00:00 ? 00:00:00 [bioset] | |
root 480 2 0 00:00 ? 00:00:00 [bioset] | |
root 481 2 0 00:00 ? 00:00:00 [bioset] | |
root 482 2 0 00:00 ? 00:00:00 [bioset] | |
root 483 2 0 00:00 ? 00:00:00 [bioset] | |
root 484 2 0 00:00 ? 00:00:00 [bioset] | |
root 485 2 0 00:00 ? 00:00:00 [bioset] | |
root 486 2 0 00:00 ? 00:00:00 [bioset] | |
root 520 2 0 00:00 ? 00:00:00 [bioset] | |
root 523 2 0 00:00 ? 00:00:00 [bioset] | |
root 526 2 0 00:00 ? 00:00:00 [bioset] | |
root 529 2 0 00:00 ? 00:00:00 [bioset] | |
root 532 2 0 00:00 ? 00:00:00 [bioset] | |
root 535 2 0 00:00 ? 00:00:00 [bioset] | |
root 538 2 0 00:00 ? 00:00:00 [bioset] | |
root 541 2 0 00:00 ? 00:00:00 [bioset] | |
root 545 2 0 00:00 ? 00:00:00 [bioset] | |
root 569 2 0 00:00 ? 00:00:00 [spi32766] | |
root 573 2 0 00:00 ? 00:00:00 [bioset] | |
root 578 2 0 00:00 ? 00:00:00 [bioset] | |
root 583 2 0 00:00 ? 00:00:00 [bioset] | |
root 621 2 0 00:00 ? 00:00:00 [aoe_tx0] | |
root 622 2 0 00:00 ? 00:00:00 [aoe_ktio0] | |
root 642 2 0 00:00 ? 00:00:00 [kpsmoused] | |
root 670 2 0 00:00 ? 00:00:00 [irq/28-mmc0] | |
root 755 2 0 00:00 ? 00:00:00 [kworker/u4:3] | |
root 838 2 0 00:00 ? 00:00:00 [ipv6_addrconf] | |
root 842 2 0 00:00 ? 00:00:00 [krfcommd] | |
root 847 2 0 00:00 ? 00:00:00 [deferwq] | |
root 852 2 0 00:00 ? 00:00:00 [kworker/1:2] | |
root 855 2 0 00:00 ? 00:00:00 [bioset] | |
root 856 2 0 00:00 ? 00:00:00 [mmcqd/0] | |
root 861 2 0 00:00 ? 00:00:00 [kworker/1:1H] | |
root 862 2 0 00:00 ? 00:00:00 [kworker/0:1H] | |
root 863 2 0 00:00 ? 00:00:00 [jbd2/mmcblk0p2-] | |
root 864 2 0 00:00 ? 00:00:00 [ext4-rsv-conver] | |
root 1486 1 0 00:00 ? 00:00:00 /lib/systemd/systemd-udevd | |
root 1487 1 0 00:00 ? 00:00:00 /lib/systemd/systemd-journald | |
root 1671 1 0 00:00 ? 00:00:00 /usr/sbin/parallella-thermald | |
root 1675 1 0 00:00 ? 00:00:00 /usr/sbin/cron -f | |
avahi 1686 1 0 00:00 ? 00:00:00 avahi-daemon: running [parallell | |
syslog 1690 1 0 00:00 ? 00:00:00 /usr/sbin/rsyslogd -n | |
daemon 1692 1 0 00:00 ? 00:00:00 /usr/sbin/atd -f | |
root 1695 1 0 00:00 ? 00:00:00 /lib/systemd/systemd-logind | |
root 1697 1 0 00:00 ? 00:00:00 /usr/sbin/sshd -D | |
avahi 1701 1686 0 00:00 ? 00:00:00 avahi-daemon: chroot helper | |
message+ 1708 1 0 00:00 ? 00:00:00 /usr/bin/dbus-daemon --system -- | |
root 1722 1 0 00:00 tty1 00:00:00 /sbin/agetty --noclear tty1 linu | |
root 1727 1 0 00:00 ttyPS0 00:00:00 /bin/login -f | |
root 1803 1 0 00:00 ? 00:00:00 /lib/systemd/systemd --user | |
root 1808 1803 0 00:00 ? 00:00:00 (sd-pam) | |
root 1812 1727 0 00:00 ttyPS0 00:00:00 -bash | |
root 1873 1 0 00:00 ? 00:00:00 dhclient -1 -v -pf /run/dhclient | |
root 1962 2 0 00:00 ? 00:00:00 [kworker/0:4] | |
ntp 2017 1 0 00:00 ? 00:00:00 /usr/sbin/ntpd -p /var/run/ntpd. | |
root 2020 2017 0 00:00 ? 00:00:00 /usr/sbin/ntpd -p /var/run/ntpd. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment