Last active
November 12, 2016 20:53
-
-
Save tuklusan/bf875b251657c8c7f07cb6d4e28306a1 to your computer and use it in GitHub Desktop.
First Boot of OpenVMS VAX Installation on Supratim Sanyal's Hobbyist Digital Microvax 3900 Server : http://supratim-sanyal.blogspot.com/2016/10/how-to-build-your-own-digital-dec.html
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| KA655-B V5.3, VMB 2.7 | |
| Performing normal system tests. | |
| 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25.. | |
| 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09.. | |
| 08..07..06..05..04..03.. | |
| Tests completed. | |
| >>>B DUA0: | |
| (BOOT/R5:0 DUA0 | |
| 2.. | |
| -DUA0 | |
| 1..0.. | |
| %SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk | |
| %SYSBOOT-W-SYSBOOT Can not map SYSDUMP.DMP on the System Disk | |
| %SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk | |
| %SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the PAGEFILE.SYS | |
| OpenVMS (TM) VAX Version BI71-6NO Major version id = 1 Minor version id = 0 | |
| OpenVMS VAX V7.1 Installation Procedure | |
| Model: VAXserver 3900 Series | |
| System device: RA92 - _DUA0: | |
| Free Blocks: 2877504 | |
| CPU type: 10-01 | |
| * Please enter the date and time (DD-MMM-YYYY HH:MM) 29-SEP-2016 01:53 | |
| ********************************************************* | |
| %SYSTEM-W-TZGMT, your local timezone has defaulted to GMT | |
| %SYSTEM-I-SETTZ, to set your local timezone use: | |
| $ @SYS$MANAGER:UTC$TIME_SETUP.COM | |
| ********************************************************* | |
| On MIN or UPGRADE system startup - CLUE is not run. | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:01.90 %%%%%%%%%%% | |
| Operator _OPA0: has been enabled, username SYSTEM | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:01.90 %%%%%%%%%%% | |
| Operator status for operator _OPA0: | |
| CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, | |
| LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, | |
| OPER11, OPER12 | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:01.93 %%%%%%%%%%% | |
| Logfile has been initialized by operator _OPA0: | |
| Logfile is SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1 | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:01.94 %%%%%%%%%%% | |
| Operator status for operator SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1 | |
| CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, | |
| LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, | |
| OPER11, OPER12 | |
| %SYSTEM-I-BOOTUPGRADE, security auditing disabled | |
| %LICENSE-F-EMTLDB, license database contains no license records | |
| %SYSTEM-I-BOOTUPGRADE, security server not started | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:03.26 %%%%%%%%%%% | |
| Message from user JOB_CONTROL | |
| %JBC-E-OPENERR, error opening SYS$SYSROOT:[SYSEXE]QMAN$MASTER.DAT; | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:03.26 %%%%%%%%%%% | |
| Message from user JOB_CONTROL | |
| -RMS-E-FNF, file not found | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 01:53:03.55 %%%%%%%%%%% | |
| Message from user SYSTEM | |
| %LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node | |
| -LICENSE-F-NOLICENSE, no license is active for this software product | |
| -LICENSE-I-SYSMGR, please see your system manager | |
| %LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node | |
| -LICENSE-F-NOLICENSE, no license is active for this software product | |
| -LICENSE-I-SYSMGR, please see your system manager | |
| Startup processing continuing... | |
| If this system disk is to be used in a cluster with multiple system | |
| disks, then each system disk must have a unique volume label. Any | |
| nodes having system disks with duplicate volume labels will fail to | |
| boot into the cluster. | |
| You can indicate a volume label of 1 to 12 characters in length. If you | |
| want to use the default name of OpenVMS071, press RETURN in response | |
| to the next question. | |
| * Enter the volume label for this system disk [OpenVMS071]: | |
| * Enter name of drive holding the OpenVMS distribution media: DUA3: | |
| * Is the OpenVMS media ready to be mounted? [N] y | |
| %MOUNT-I-MOUNTED, VAXVMS071 mounted on _DUA3: | |
| Select optional software you want to install. You can install one | |
| or more of the following OpenVMS or DECwindows components: | |
| o OpenVMS library - 52200 blocks | |
| o OpenVMS optional - 19000 blocks | |
| o OpenVMS Help Message - 10400 blocks | |
| o OpenVMS Management Station - 20000 blocks | |
| o DECwindows base support - 4400 blocks | |
| o DECwindows workstation support - 23800 blocks | |
| - 75 dots per inch video fonts - (included) | |
| - 100 dots per inch video fonts - 6200 blocks | |
| o DECnet-Plus networking - 80000 blocks | |
| Space remaining on system disk: 2877324 blocks | |
| * Do you want to install the OpenVMS library files? (Y/N) y | |
| Space remaining on system disk: 2825124 blocks | |
| * Do you want to install the OpenVMS optional files? (Y/N) y | |
| Space remaining on system disk: 2806124 blocks | |
| The Help Message utility (MSGHLP) provides online explanations | |
| and user actions for OpenVMS messages in place of the hardcopy | |
| OpenVMS System Messages and Recovery Procedures Reference Manual, | |
| which is now separately orderable. | |
| The MSGHLP database file, MSGHLP$LIBRARY.MSGHLP$DATA, | |
| consumes approximately 10400 blocks and will be | |
| placed by default on your system disk in SYS$COMMON:[SYSHLP] | |
| unless you specify an alternate device when prompted. | |
| * Do you want to install the MSGHLP database? (Y/N) y | |
| You can install this database on your system disk in SYS$COMMON:[SYSHLP] | |
| or on an alternate device. If you specify an alternate device, but no | |
| directory, MSGHLP$LIBRARY.MSGHLP$DATA is placed in [HELP_MESSAGE]. When | |
| prompted, take the default of the system disk or specify an alternate | |
| device using this format: | |
| device:[directory] | |
| * Where do you want to install the MSGHLP database?[SYS$COMMON:[SYSHLP]] | |
| Space remaining on system disk: 2795724 blocks | |
| The OpenVMS Management Station is a client-server application | |
| that provides OpenVMS system management capabilities through a | |
| client application on a personal computer (PC) running Microsoft | |
| Windows. The server application runs on OpenVMS systems and is | |
| automatically installed as part of the OpenVMS operating system. | |
| This option provides the files used to create the installation media | |
| for the PC client software. If you want to use the OpenVMS Management | |
| Station, you must install these files on at least one OpenVMS system to | |
| create the installation media, which can then be used to install the | |
| PC client on one or more PCs. | |
| Note: To use the OpenVMS Management Station on your PC, you must be | |
| running Digital's PATHWORKS V5.0A for DOS and Windows (or V5.1) | |
| software. | |
| The OpenVMS Management Station optional files consume approximately 20000 | |
| blocks and will be placed on your system disk in SYS$COMMON:[TNT.CLIENT]. | |
| * Do you want to install the optional OpenVMS Management Station files? (Y/N) y | |
| Space remaining on system disk: 2775724 blocks | |
| You can select DECwindows now, or you can use the DECW$TAILOR utility | |
| to provide or remove DECwindows support after the installation. | |
| Some media, TK50s in particular, can be very slow when tailoring on files. | |
| You might want to select DECwindows now and tailor off unwanted files later. | |
| NOTE: This kit does NOT contain full DECwindows. | |
| To obtain full DECwindows, you must also install the separate | |
| layered product, DECwindows Motif for OpenVMS VAX. | |
| V1.2-3 is the minimum version of DECwindows Motif for OpenVMS VAX | |
| that can be used with OpenVMS VAX V7.1. | |
| The DECwindows components provided in this kit requires approximately | |
| 34400 blocks, broken down as follows: | |
| o DECwindows base support - 4400 blocks | |
| o DECwindows workstation support - 23800 blocks | |
| - 75 dots per inch video fonts - (included) | |
| - 100 dots per inch video fonts (optional) - 6200 blocks | |
| You must select the DECwindows base support option if | |
| - you plan to run DECwindows software, or | |
| - you are installing this kit on | |
| * a workstation or | |
| * a VAXcluster that contains workstations, or | |
| - you want to provide font files for Xterminals. | |
| If you are installing this kit on a system that includes Xterminals | |
| and you do NOT select DECwindows base support, then you will have to use | |
| the DECW$TAILOR utility to provide font files. | |
| * Do you want the DECwindows base support? (Y/N) N | |
| Beginning with OpenVMS V7.1 DECnet-Plus is provided with the | |
| OpenVMS operating system. Digital strongly recommends that DECnet | |
| users install DECnet-Plus. DECnet Phase IV applications are | |
| supported by DECnet-Plus. | |
| DECnet Phase IV is available for separate installation. Please see the | |
| "OpenVMS V7.1 Release Notes" for important information regarding | |
| DECnet Phase IV support. | |
| If you plan to install DECnet Phase IV do NOT select DECnet-Plus. | |
| * Do you want to install DECnet-Plus? (Y/N) Y | |
| Space remaining on system disk: 2695724 blocks | |
| The following options will be provided: | |
| OpenVMS library | |
| OpenVMS optional | |
| OpenVMS Help Message | |
| OpenVMS Management Station Software -- PC files | |
| DECnet-Plus | |
| Space remaining on system disk: 2695724 blocks | |
| * Is this correct? (Y/N) Y | |
| Restoring OpenVMS library save set ... | |
| %BACKUP-I-STARTVERIFY, starting verification pass | |
| Restoring OpenVMS optional save set ... | |
| %BACKUP-I-STARTVERIFY, starting verification pass | |
| Restoring OpenVMS Help Message save set ... | |
| %BACKUP-I-STARTVERIFY, starting verification pass | |
| Restoring OpenVMS Management Station Software -- PC files | |
| %BACKUP-I-STARTVERIFY, starting verification pass | |
| You can now remove the distribution kit from DUA3:. | |
| Creating [VMS$COMMON] directory tree ... | |
| In a cluster, you can run multiple systems sharing all files except | |
| PAGEFILE.SYS, SWAPFILE.SYS, SYSDUMP.DMP, and VAXVMSSYS.PAR. | |
| Cluster configuration cannot be done at this time because no network | |
| is present. In order to configure a cluster you must FIRST do one | |
| or both of the following: | |
| o Install DECnet-Plus (or DECnet Phase IV), or | |
| o Execute SYS$STARTUP:LAN$STARTUP.COM by removing the | |
| comment delimiter ("!") from the line | |
| $! @SYS$STARTUP:LAN$STARTUP | |
| in SYS$MANAGER:SYSTARTUP_VMS.COM. | |
| Then configure the cluster by executing the following command: | |
| @ @SYS$MANAGER:CLUSTER_CONFIG | |
| See the OpenVMS System Manager's Manual: Essentials for more information. | |
| Now we will ask you for new passwords for the following accounts: | |
| SYSTEM, SYSTEST, FIELD | |
| Passwords must be a minimum of 8 characters in length. All passwords | |
| will be checked and verified. Any passwords that can be guessed easily | |
| will not be accepted. | |
| * Enter password for SYSTEM: | |
| * Re-enter for verification: | |
| Password verification error. | |
| * Enter password for SYSTEM: | |
| Password must be at least 8 characters in length. | |
| * Enter password for SYSTEM: | |
| * Re-enter for verification: | |
| %UAF-I-PWDLESSMIN, new password is shorter than minimum password length | |
| %UAF-I-MDFYMSG, user record(s) updated | |
| %VMS-I-PWD_OKAY, account password for SYSTEM verified | |
| * Enter password for SYSTEST: | |
| * Re-enter for verification: | |
| %UAF-I-PWDLESSMIN, new password is shorter than minimum password length | |
| %UAF-I-MDFYMSG, user record(s) updated | |
| %VMS-I-PWD_OKAY, account password for SYSTEST verified | |
| The SYSTEST_CLIG account will be disabled. You must re-enable | |
| it before running UETP but do not assign a password. | |
| %UAF-I-PWDLESSMIN, new password is shorter than minimum password length | |
| %UAF-I-MDFYMSG, user record(s) updated | |
| * Enter password for FIELD: | |
| * Re-enter for verification: | |
| Password verification error. | |
| * Enter password for FIELD: | |
| * Re-enter for verification: | |
| %UAF-I-PWDLESSMIN, new password is shorter than minimum password length | |
| %UAF-I-MDFYMSG, user record(s) updated | |
| %VMS-I-PWD_OKAY, account password for FIELD verified | |
| Creating RIGHTS database file, SYS$SYSTEM:RIGHTSLIST.DAT | |
| Ignore any "-SYSTEM-F-DUPIDENT, duplicate identifier" errors. | |
| %UAF-I-RDBCREMSG, rights database created | |
| %UAF-I-RDBADDMSGU, identifier DEFAULT value [000200,000200] added to rights database | |
| %UAF-I-RDBADDMSGU, identifier FIELD value [000001,000010] added to rights database | |
| %UAF-I-RDBADDMSGU, identifier SYSTEM value [000001,000004] added to rights database | |
| %UAF-I-RDBADDMSGU, identifier SYSTEST value [000001,000007] added to rights database | |
| %UAF-E-RDBADDERRU, unable to add SYSTEST_CLIG value [000001,000007] to rights database | |
| -SYSTEM-F-DUPIDENT, duplicate identifier | |
| %UAF-I-NOMODS, no modifications made to system authorization file | |
| %UAF-I-RDBDONEMSG, rights database modified | |
| Creating MODPARAMS.DAT database file, SYS$SYSTEM:MODPARAMS.DAT | |
| * Please enter the SCSNODE name: TUKLUSVAX | |
| TUKLUSVAX is an invalid node name. | |
| The name must be 6 or fewer alphanumeric characters | |
| with at least one alphabetic character | |
| * Please enter the SCSNODE name: FOOBAR | |
| * Please enter the SCSSYSTEMID: 1.151 | |
| 1.151 is not a legal SCSSYSTEMID | |
| Legal range is 1025 - 65535 | |
| * Please enter the SCSSYSTEMID: 1025 | |
| After the installation finishes, you might want to do one or more of the | |
| following tasks: | |
| o DECOMPRESS THE SYSTEM LIBRARIES - To save space, many of the system | |
| libraries are shipped in a data-compressed format. If you have | |
| enough disk space, you can decompress the libraries for faster access. | |
| To data expand the libraries, type: | |
| $ @SYS$UPDATE:LIBDECOMP.COM | |
| If you do not decompress these libraries, you will experience slower | |
| response to the HELP and LINK commands. | |
| o BUILD A STANDALONE BACKUP KIT - You can build a standalone backup kit | |
| using the procedure described in the upgrade and installation supplement" | |
| supplied for your VAX computer. | |
| o TAILOR THE SYSTEM DISK - You might want to review the files provided or | |
| not provided during this installation. If you find there are files | |
| you want to remove from the system disk (TAILOR OFF) or files you want | |
| to add (TAILOR ON), use the following utilities to perform the | |
| desired tailoring. | |
| OpenVMS tailoring: $ RUN SYS$UPDATE:VMSTAILOR | |
| DECwindows tailoring: $ RUN SYS$UPDATE:DECW$TAILOR | |
| NOTE: The tailor procedure cannot be used to TAILOR ON or TAILOR OFF | |
| files located on an alternate disk. | |
| ================================================================= | |
| Continuing with OpenVMS VAX V7.1 Installation Procedure. | |
| Configuring all devices on the system ... | |
| If you have Product Authorization Keys (PAKs) to register, you can | |
| register them now. | |
| * Do you want to register any Product Authorization Keys? (Y/N): N | |
| ******************************************************************************** | |
| After the system has rebooted you must register any Product | |
| Authorization Keys (PAKs) that you have received with this kit. | |
| You can register these PAKs by executing the following procedure: | |
| $ @SYS$UPDATE:VMSLICENSE | |
| See the OpenVMS License Management Utility Manual for any additional | |
| information you need. | |
| ******************************************************************************** | |
| Now registering the OpenVMS operating system in the | |
| POLYCENTER Software Installation product database | |
| The following product will be registered: | |
| DEC VAXVMS VMS V7.1 Transition (registration) | |
| The following product has been registered: | |
| DEC VAXVMS VMS V7.1 Transition (registration) | |
| %UTC-I-UPDTIME, updating Time Zone information in SYS$COMMON:[SYSEXE] | |
| Configuring the Local Time Zone | |
| TIME ZONE SPECIFICATION -- Main Time Zone Menu | |
| 1) Australia 11) GMT 21) Mexico 31) Turkey | |
| 2) Brazil 12) Greenwich 22) NZ 32) UCT | |
| 3) CET 13) Hong Kong 23) NZ-CHAT 33) US | |
| 4) Canada 14) Iceland 24) Navajo 34) UTC | |
| 5) Chile 15) Iran 25) PRC 35) Universal | |
| 6) Cuba 16) Israel 26) Poland 36) W-SU | |
| 7) EET 17) Jamaica 27) ROC 37) WET | |
| 8) Egypt 18) Japan 28) ROK 38) Zulu | |
| 9) Factory 19) Libya 29) Singapore | |
| 10) GB-Eire 20) MET 30) SystemV | |
| 0) None of the above | |
| Select the number above that best describes your location: 11 | |
| You selected GMT as your time zone. | |
| Is this correct? (Yes/No) [YES]: | |
| GMT Time Zone Menu | |
| 1) GMT 12) GMT10 23) GMT-7 34) GMTPLUS5 | |
| 2) GMT0 13) GMT11 24) GMT-8 35) GMTPLUS6 | |
| 3) GMT1 14) GMT12 25) GMT-9 36) GMTPLUS7 | |
| 4) GMT2 15) GMT13 26) GMT-10 37) GMTPLUS8 | |
| 5) GMT3 16) GMT-0 27) GMT-11 38) GMTPLUS9 | |
| 6) GMT4 17) GMT-1 28) GMT-12 39) GMTPLUS10 | |
| 7) GMT5 18) GMT-2 29) GMTPLUS0 40) GMTPLUS11 | |
| 8) GMT6 19) GMT-3 30) GMTPLUS1 41) GMTPLUS12 | |
| 9) GMT7 20) GMT-4 31) GMTPLUS2 42) GMTPLUS13 | |
| 10) GMT8 21) GMT-5 32) GMTPLUS3 | |
| 11) GMT9 22) GMT-6 33) GMTPLUS4 | |
| 0) None of the above | |
| Select the number above that best describes your location: 1 | |
| You selected GMT as your time zone. | |
| Is this correct? (Yes/No) [YES]: | |
| Default Time Differential Factor is 0:00. | |
| The Time Differential Factor (TDF) is the difference between your | |
| system time and Coordinated Universal Time (UTC). UTC is similar | |
| in most repects to Greenwich Mean Time (GMT). | |
| The TDF is expressed as hours and minutes, and should be entered | |
| in the hh:mm format. TDFs for the Americas will be negative | |
| (-3:00, -4:00, etc.); TDFs for Europe, Africa, Asia and Australia | |
| will be positive (1:00, 2:00, etc.). | |
| Enter the Time Differential Factor [0:00]: | |
| NEW SYSTEM TIME DIFFERENTIAL FACTOR = 0:00. | |
| Is this correct? [Y]: | |
| DECnet-Plus will now be installed. | |
| Media containing the DECnet-Plus kit must be available. | |
| If you are installing OpenVMS from an Infoserver (DAD1) | |
| or local CD-ROM, there is a DECnet-Plus kit on the CD-ROM. | |
| If you are installing from a cartridge tape (TK50) or | |
| from an open reel tape, you should have a DECnet-Plus kit | |
| on cartidge tape or open reel tape. | |
| An appropriate DECnet-Plus kit may also be available on | |
| the Consolidated Distribution CD-ROM, or you may have a | |
| separate DECnet-Plus kit. | |
| NOTE: You may choose any available media for the | |
| DECnet-Plus kit. It is NOT NECESSARY to use the same | |
| type of media that contained the OpenVMS kit. | |
| If you do not have a DECnet-Plus kit available, or if you | |
| have decided NOT to install/upgrade DECnet-Plus, you can | |
| bypass the DECnet-Plus installation by entering "EXIT" | |
| for the "name of drive holding the DECnet-Plus kit". | |
| * Enter name of drive holding the DECnet-Plus kit: DUA3: | |
| * Is DUA3: ready to be mounted? [N] Y | |
| The following product has been selected: | |
| DEC VAXVMS DECNET_OSI V7.1 Layered Product | |
| Configuration phase starting ... | |
| You will be asked to choose options, if any, for each selected product and for | |
| any products that may be installed to satisfy software dependency requirements. | |
| DEC VAXVMS DECNET_OSI V7.1: DECnet-Plus V7.1 for OpenVMS VAX | |
| Copyright ▒ Digital Equipment Corporation 1994. All rights reserved. | |
| Digital Equipment Corporation | |
| This product requires one of two PAKs: DVNETEND or DVNETRTG. | |
| Do you want the defaults for all options? [YES] | |
| Do you want to review the options? [NO] | |
| Execution phase starting ... | |
| The following product will be installed: | |
| DEC VAXVMS DECNET_OSI V7.1 Layered Product | |
| Portion done: 0%...10%...20%...30%...40%...80%...90%...100% | |
| The following product has been installed: | |
| DEC VAXVMS DECNET_OSI V7.1 Layered Product | |
| ******************************************************************************** | |
| Running AUTOGEN to compute the new SYSTEM parameters ... | |
| %AUTOGEN-I-BEGIN, GETDATA phase is beginning. | |
| %AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:PARAMS.DAT has been created. | |
| You may wish to purge this file. | |
| %AUTOGEN-I-END, GETDATA phase has successfully completed. | |
| %AUTOGEN-I-BEGIN, GENPARAMS phase is beginning. | |
| %AUTOGEN-I-NEWFILE, A new version of SYS$MANAGER:VMSIMAGES.DAT has been created. | |
| You may wish to purge this file. | |
| %AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:SETPARAMS.DAT has been created. | |
| You may wish to purge this file. | |
| %AUTOGEN-I-END, GENPARAMS phase has successfully completed. | |
| %AUTOGEN-I-BEGIN, GENFILES phase is beginning. | |
| %SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]PAGEFILE.SYS;1 extended | |
| %SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]SWAPFILE.SYS;1 extended | |
| %SYSGEN-I-CREATED, SYS$SPECIFIC:[SYSEXE]SYSDUMP.DMP;1 created | |
| %SYSGEN-I-CREATED, DUA0:[SYS0.SYSEXE]ERRORLOG.DMP;1 created | |
| %AUTOGEN-I-REPORT, AUTOGEN has produced some informational messages which | |
| have been stored in the file SYS$SYSTEM:AGEN$PARAMS.REPORT. You may | |
| wish to review the information in that file. | |
| %AUTOGEN-I-END, GENFILES phase has successfully completed. | |
| %AUTOGEN-I-BEGIN, SETPARAMS phase is beginning. | |
| %AUTOGEN-I-END, SETPARAMS phase has successfully completed. | |
| %AUTOGEN-I-BEGIN, REBOOT phase is beginning. | |
| The system is shutting down to allow the system to boot with the | |
| generated site-specific parameters and installed images. | |
| The system will automatically reboot after the shutdown and the | |
| installation will be complete. | |
| SHUTDOWN -- Perform an Orderly System Shutdown | |
| %SHUTDOWN-I-BOOTCHECK, performing reboot consistency check... | |
| %SHUTDOWN-I-CHECKOK, basic reboot consistency check completed | |
| %SHUTDOWN-I-OPERATOR, this terminal is now an operator's console | |
| %OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running | |
| %SHUTDOWN-I-DISLOGINS, interactive logins will now be disabled | |
| %SET-I-INTSET, login interactive limit = 0, current interactive value = 0 | |
| %SHUTDOWN-I-STOPQUEUES, the queues on this node will now be stopped | |
| %JBC-E-OPENERR, error opening SYS$SYSROOT:[SYSEXE]QMAN$MASTER.DAT; | |
| -RMS-E-FNF, file not found | |
| SHUTDOWN message from user SYSTEM at Batch 02:04:41 | |
| The system will shut down in 0 minutes; back up SOON. Please log off. | |
| Reboot system with AUTOGENerated parameters | |
| %SHUTDOWN-I-STOPUSER, all user processes will now be stopped | |
| %SHUTDOWN-I-REMOVE, all installed images will now be removed | |
| %SHUTDOWN-I-DISMOUNT, all volumes will now be dismounted | |
| %OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running | |
| %OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running | |
| HALT instruction, PC: 8443BD09 (MOVB 400(R1),R0) | |
| KA655-B V5.3, VMB 2.7 | |
| Performing normal system tests. | |
| 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25.. | |
| 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09.. | |
| 08..07..06..05..04..03.. | |
| Tests completed. | |
| >>>b dua0 | |
| (BOOT/R5:0 DUA0 | |
| 2.. | |
| -DUA0 | |
| 1..0.. | |
| %SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk | |
| %SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped | |
| OpenVMS (TM) VAX Version V7.1 Major version id = 1 Minor version id = 0 | |
| %DECnet-I-LOADED, network base image loaded, version = 05.0C.00 | |
| %DECnet-W-NOOPEN, could not open SYS$SYSROOT:[SYSEXE]NET$CONFIG.DAT | |
| ***************************************************************** | |
| OpenVMS VAX V7.1 | |
| You have SUCCESSFULLY installed the OpenVMS VAX Operating System. | |
| The system is now executing the STARTUP procedure. Please | |
| wait for the completion of STARTUP before logging in to the | |
| system. | |
| ***************************************************************** | |
| %STDRV-I-STARTUP, OpenVMS startup begun at 29-SEP-2016 06:08:08.27 | |
| %DCL-S-SPAWNED, process SYSTEM_1 spawned | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.25 %%%%%%%%%%% | |
| Operator _FOOBAR$OPA0: has been enabled, username SYSTEM | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.26 %%%%%%%%%%% | |
| Operator status for operator _FOOBAR$OPA0: | |
| CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, | |
| LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, | |
| OPER11, OPER12 | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.27 %%%%%%%%%%% | |
| Logfile has been initialized by operator _FOOBAR$OPA0: | |
| Logfile is FOOBAR::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1 | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.27 %%%%%%%%%%% | |
| Operator status for operator FOOBAR::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1 | |
| CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY, | |
| LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10, | |
| OPER11, OPER12 | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.51 %%%%%%%%%%% | |
| Message from user AUDIT$SERVER on FOOBAR | |
| %AUDSRV-I-NEWSERVERDB, new audit server database created | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.84 %%%%%%%%%%% | |
| Message from user AUDIT$SERVER on FOOBAR | |
| %AUDSRV-I-REMENABLED, resource monitoring enabled for journal SECURITY | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:21.85 %%%%%%%%%%% | |
| Message from user AUDIT$SERVER on FOOBAR | |
| %AUDSRV-I-NEWOBJECTDB, new object database created | |
| %SET-I-NEWAUDSRV, identification of new audit server process is 0000020A | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:22.32 %%%%%%%%%%% | |
| Message from user JOB_CONTROL on FOOBAR | |
| %JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT; | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:22.33 %%%%%%%%%%% | |
| Message from user JOB_CONTROL on FOOBAR | |
| -RMS-E-FNF, file not found | |
| %LICENSE-F-EMTLDB, license database contains no license records | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:23.13 %%%%%%%%%%% | |
| Message from user SYSTEM on FOOBAR | |
| %SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT | |
| %RMS-E-FNF, file not found | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:23.15 %%%%%%%%%%% | |
| Message from user SYSTEM on FOOBAR | |
| %SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT | |
| %RMS-E-FNF, file not found | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:23.16 %%%%%%%%%%% | |
| Message from user SYSTEM on FOOBAR | |
| %SECSRV-I-SERVERSTARTINGU, security server starting up | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:23.27 %%%%%%%%%%% | |
| Message from user SYSTEM on FOOBAR | |
| %SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now starting up | |
| Copyright (c) Digital Equipment Corporation 1996. All rights reserved. | |
| %NET$STARTUP-W-NONETCONFIG, this node has not been configured to run DECnet-Plus for OpenVMS | |
| use SYS$MANAGER:NET$CONFIGURE.COM if you wish to configure DECnet | |
| %NET$STARTUP-I-OPERSTATUS, DECnet-Plus for OpenVMS operational status is OFF | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:28.18 %%%%%%%%%%% | |
| Message from user SYSTEM on FOOBAR | |
| %LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node | |
| -LICENSE-F-NOLICENSE, no license is active for this software product | |
| -LICENSE-I-SYSMGR, please see your system manager | |
| %LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node | |
| -LICENSE-F-NOLICENSE, no license is active for this software product | |
| -LICENSE-I-SYSMGR, please see your system manager | |
| Startup processing continuing... | |
| %DECdtm-F-NODECnet, the TP_SERVER process was not started because either: | |
| o DECnet-Plus is not started or is not configured, or | |
| o The SYS$NODE_FULLNAME logical name is not defined | |
| This could be because when you installed DECnet-Plus and were prompted | |
| for the system's full name, you specified a local name instead of a | |
| DECdns or Domain name. | |
| If you want to use DECdtm services, make sure that DECnet-Plus is started and | |
| configured and that SYS$NODE_FULLNAME is defined, then use the following | |
| command to start the TP_SERVER process: | |
| $ @SYS$STARTUP:DECDTM$STARTUP.COM | |
| %%%%%%%%%%% OPCOM 29-SEP-2016 06:08:28.94 %%%%%%%%%%% | |
| Message from user AUDIT$SERVER on FOOBAR | |
| Security alarm (SECURITY) and security audit (SECURITY) on FOOBAR, system id: 1025 | |
| Auditable event: Audit server starting up | |
| Event time: 29-SEP-2016 06:08:28.88 | |
| PID: 00000203 | |
| Username: SYSTEM | |
| %UAF-I-RDBADDMSG, identifier SYS$NODE_FOOBAR value %X80010000 added to rights database | |
| %SET-I-INTSET, login interactive limit = 64, current interactive value = 0 | |
| SYSTEM job terminated at 29-SEP-2016 06:08:31.32 | |
| Accounting information: | |
| Buffered I/O count: 1401 Peak working set size: 894 | |
| Direct I/O count: 755 Peak page file size: 5069 | |
| Page faults: 6402 Mounted volumes: 0 | |
| Charged CPU time: 0 00:00:21.46 Elapsed time: 0 00:00:25.19 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment