tushroy/QYT-Radio-TRRS-connector-config.md

Last active June 28, 2026 10:17

Star (0) You must be signed in to star a gist
Fork (0) You must be signed in to fork a gist

Select an option

Learn more about clone URLs
Clone this repository at <script src="https://gist.github.com/tushroy/a5e3a6a02bd2b1dd7752a82008e5f337.js"></script>
Save tushroy/a5e3a6a02bd2b1dd7752a82008e5f337 to your computer and use it in GitHub Desktop.

Download ZIP

QYT Radio TRRS connector config

Raw

QYT-Radio-TRRS-connector-config.md

QYT Radio TRRS connector config

S21TIP

tushroy commented Apr 4, 2026 •

edited

Loading

Author

The QYT KT-8900 and KT-8900D radios are well suited for running an Allstalink node. The configuration menu REP-M (#43 on KT-8900, #51 on KT-8900D) allows two radios to make a repeater by connecting a cable between the two microphone connectors (RJ45 plugs). The configuration feeds a RPT-CTLR signal when the squelch opens (or subtone received) through the mic connector which is wired to the PTT on the other radio.

The RPT-CTLR is effectively a COR signal which can be wired to the DMK URI for Allstarlink operation, and no modification to the radio circuit board is necessary. As a proof of concept, I sacrificed an ethernet cable and soldered a DB25 plug on it according to the wiring shown on the picture. This works as expected and with good sound quality. The KT-8900D offers much radio for the money, and I believe it should be interesting for use in private Allstarlink nodes.
The RPT-CTLR is active low, so you need to set “carrierfrom=usbinvert” in simpleusb.conf

After 3 hours operation on 95% duty cycle, the radio is only lukewarm, using low output power (10w)