I2C Scanner for Wio Terminal(fork from https://github.com/m5stack/M5Stack/blob/master/examples/Advanced/I2C_Tester/I2C_Tester.ino)

I2C_Tester.ino

/************************************************************************

  M5StackFire I2C Scanner

  The M5StackFire has a connector for I2C devices. 
  This program scans the addresses 1-127 continuosly and shows 
  the devices found on the TFT.

  The M5Stack fire has two internal I2C devices at address 0x68 and 0x75.
  
  If they do not appear on the TFT it could mean you made a short cut on 
  the I2C bus.

  October 2018, ChrisMicro

************************************************************************/
#include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
#include <SPI.h>
#include <Wire.h>

#define TFT_GREY 0x5AEB // New colour

TFT_eSPI tft = TFT_eSPI(); // Invoke library

void setup()
{
    tft.init();
    tft.setRotation(2);
    Wire.begin();

    delay(3000);
    tft.fillScreen(TFT_BLACK);
}

int textColor = TFT_YELLOW;

void loop()
{
    int address;
    int error;
    tft.setCursor(0, 0);
    tft.println("scanning Address [HEX]");

    for (address = 1; address < 127; address++)
    {
        Wire.beginTransmission(address);
        error = Wire.endTransmission();
        if (error == 0)
        {
            tft.print(address, HEX);
            tft.print(" ");
        }
        else
            tft.print(".");

        delay(10);
    }

    if (textColor == TFT_YELLOW)
        textColor = TFT_GREEN;
    else
        textColor = TFT_YELLOW;
    tft.setTextColor(textColor, TFT_BLACK);
}