Arduino MIDI controller Demo

ArduinoMIDI2OPZ.ino

/*   Arduino analog to USB MIDI
     Ubi de Feo @ Bar Arduino
     https://www.youtube.com/watch?v=0zNmt_IKwRg

     supported boards:
       - Arduino MKR Family
       - Arduino Nano 33 IoT

**** Sketch for BLE MIDI (Nano BLE and Nano BLE Sense)                                    ****
**** can be found here https://gist.github.com/ubidefeo/3e7362235cee5317cec4a36f07585e29  ****
**** Thank you Larry Bank for pointing out the lack of a BLE version                      ****

*/


#include "MIDIUSB.h"
void controlChange(byte channel, byte control, byte value) {
  midiEventPacket_t event = {0x0B, 0xB0 | channel, control, value};
  MidiUSB.sendMIDI(event);
}

const int SAMPLES_COUNT = 20;

// FIFO

int samplesBuffer[SAMPLES_COUNT] = {0}; 
int sampleIndex = 0;

const int knobInputPin = A1;
const int changeThreshold = 20;

int lastSensorValue;
int lastMappedValue;
unsigned long samplesSum = 0;

void setup() {
    Serial.begin(57600);
    delay(5000);
    Serial.println("SETUP");

}

void loop() {
    int knobReadOut = filterAnalogValue(knobInputPin);
    int mappedValue = map(knobReadOut, 0, 1023, 0, 127);
    
    if(lastMappedValue != mappedValue){
        // Serial.println("************ CHANGE ***************");
        // Serial.print(">>> ");
        // Serial.print(mappedValue);
        // Serial.println(" <<<");
        controlChange(0, 4, mappedValue); 
    }

    lastMappedValue = mappedValue;
}

int filterAnalogValue(int _inputPin){
    samplesSum = 0;
    int analogValue = analogRead(_inputPin);
    //int valueDelta = abs(analogValue - lastSensorValue);
    // Serial.print(analogValue);
    // Serial.print(" - ");
    // Serial.println(lastSensorValue);
    // if(valueDelta < changeThreshold){
    //     analogValue = lastSensorValue;
    // }
    if(sampleIndex < SAMPLES_COUNT){
        samplesBuffer[sampleIndex] = analogValue;
        sampleIndex++;
    }else{
        for(int samplePosition = 0; samplePosition < sampleIndex - 1; samplePosition++){0;
            samplesBuffer[samplePosition] = samplesBuffer[samplePosition + 1];
        }
        samplesBuffer[SAMPLES_COUNT - 1] = analogValue;
    }
    for(int samplePosition = 0; samplePosition < sampleIndex; samplePosition++){0;
        samplesSum += samplesBuffer[samplePosition];
        
    }
    //lastSensorValue = analogValue;

    if(samplesSum == 0) return 0;
    unsigned int filteredValue = samplesSum / sampleIndex;
    return filteredValue;
}

hey @bitbank2
you can find the BLE Sketch here https://gist.github.com/ubidefeo/3e7362235cee5317cec4a36f07585e29
I've also added a comment to thank you for pointing it out :)