Here we create the master key. We want only Certify capability: we use the master key only to create the subkeys, Sign - Encrypt - Authenticate capabilities will be assigned to the subkeys.
Run the following command to start the master key generation process. Select the set your own capabilities creation process (type 8)
▶ gpg --full-generate-key --expert
gpg (GnuPG) 2.2.9; Copyright (C) 2018 Free Software Foundation, Inc.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Please select what kind of key you want:
(1) RSA and RSA (default)
(2) DSA and Elgamal
(3) DSA (sign only)
(4) RSA (sign only)
(7) DSA (set your own capabilities)
(8) RSA (set your own capabilities)
(9) ECC and ECC
(10) ECC (sign only)
(11) ECC (set your own capabilities)
(13) Existing key
Your selection? 8
Disable sign capability (type S)
Possible actions for a RSA key: Sign Certify Encrypt Authenticate
Current allowed actions: Sign Certify Encrypt
(S) Toggle the sign capability
(E) Toggle the encrypt capability
(A) Toggle the authenticate capability
(Q) Finished
Your selection? S
Disable encrypt capabilities (type E)
Possible actions for a RSA key: Sign Certify Encrypt Authenticate
Current allowed actions: Certify Encrypt
(S) Toggle the sign capability
(E) Toggle the encrypt capability
(A) Toggle the authenticate capability
(Q) Finished
Your selection? E
Quit and continue the creation process (type Q)
Possible actions for a RSA key: Sign Certify Encrypt Authenticate
Current allowed actions: Certify
(S) Toggle the sign capability
(E) Toggle the encrypt capability
(A) Toggle the authenticate capability
(Q) Finished
Your selection? Q
Input the desired key size of the master key
RSA keys may be between 1024 and 4096 bits long.
What keysize do you want? (2048) 4096
Requested keysize is 4096 bits
Setup the expiration for the master key
Please specify how long the key should be valid.
0 = key does not expire
<n> = key expires in n days
<n>w = key expires in n weeks
<n>m = key expires in n months
<n>y = key expires in n years
Key is valid for? (0) 1y
Key expires at Sat Jul 27 17:59:59 2019 BST
Is this correct? (y/N) y
Construct your user ID (input your full name and email, leave comment empty). Type O to complete
GnuPG needs to construct a user ID to identify your key.
Real name: Mattia Cattarinussi
Email address: [email protected]
Comment:
You selected this USER-ID:
"Mattia Cattarinussi <[email protected]>"
Change (N)ame, (C)omment, (E)mail or (O)kay/(Q)uit? O
Enter a passphrase for your master key
┌──────────────────────────────────────────────────────┐
│ Please enter the passphrase to │
│ protect your new key │
│ │
│ Passphrase: ________________________________________ │
│ │
│ <OK> <Cancel> │
└──────────────────────────────────────────────────────┘
If you did the above steps correctly you should have the following result
We need to generate a lot of random bytes. It is a good idea to perform
some other action (type on the keyboard, move the mouse, utilize the
disks) during the prime generation; this gives the random number
generator a better chance to gain enough entropy.
gpg: key 4EF9EF4CDBD7AB1B marked as ultimately trusted
gpg: revocation certificate stored as '/Users/mattiacattarinussi/.gnupg/openpgp-revocs.d/F8DD1C85581AB87675EF97444EF9EF4CDBD7AB1B.rev'
public and secret key created and signed.
pub rsa4096 2018-07-27 [C] [expires: 2019-07-27]
F8DD1C85581AB87675EF97444EF9EF4CDBD7AB1B
uid Mattia Cattarinussi <[email protected]>
Store the revocation certificate (created by gpg) for your master key on a physical device.
Run this command to edit your key
▶ gpg --expert --edit-key mattia
gpg (GnuPG) 2.2.9; Copyright (C) 2018 Free Software Foundation, Inc.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Secret key is available.
sec rsa4096/4EF9EF4CDBD7AB1B
created: 2018-07-27 expires: 2019-07-27 usage: C
trust: ultimate validity: ultimate
[ultimate] (1). Mattia Cattarinussi <[email protected]>
In the gpg console prompt specify that you want to add a new key for that master key:
gpg> addkey
Select the set your own capabilities creation process (type 8)
Please select what kind of key you want:
(3) DSA (sign only)
(4) RSA (sign only)
(5) Elgamal (encrypt only)
(6) RSA (encrypt only)
(7) DSA (set your own capabilities)
(8) RSA (set your own capabilities)
(10) ECC (sign only)
(11) ECC (set your own capabilities)
(12) ECC (encrypt only)
(13) Existing key
Your selection? 8
Add Authenticate capabilities (type A). Sign and Encrypt capabilities are already enabled by default
Possible actions for a RSA key: Sign Encrypt Authenticate
Current allowed actions: Sign Encrypt
(S) Toggle the sign capability
(E) Toggle the encrypt capability
(A) Toggle the authenticate capability
(Q) Finished
Your selection? A
Type Q to continue the process
Possible actions for a RSA key: Sign Encrypt Authenticate
Current allowed actions: Sign Encrypt Authenticate
(S) Toggle the sign capability
(E) Toggle the encrypt capability
(A) Toggle the authenticate capability
(Q) Finished
Your selection? Q
Input the desired key size for the subkey
RSA keys may be between 1024 and 4096 bits long.
What keysize do you want? (2048) 4096
Requested keysize is 4096 bits
Setup the expiration for the subkey
Please specify how long the key should be valid.
0 = key does not expire
<n> = key expires in n days
<n>w = key expires in n weeks
<n>m = key expires in n months
<n>y = key expires in n years
Key is valid for? (0) 1y
Key expires at Sat Jul 27 18:19:38 2019 BST
Is this correct? (y/N) y
Really create? (y/N) y
Input the passphrase for the master key (the one you setup in the master key generation process). You should get this result
We need to generate a lot of random bytes. It is a good idea to perform
some other action (type on the keyboard, move the mouse, utilize the
disks) during the prime generation; this gives the random number
generator a better chance to gain enough entropy.
sec rsa4096/4EF9EF4CDBD7AB1B
created: 2018-07-27 expires: 2019-07-27 usage: C
trust: ultimate validity: ultimate
ssb rsa4096/855B567AA2E43D00
created: 2018-07-27 expires: 2019-07-27 usage: SEA
[ultimate] (1). Mattia Cattarinussi <[email protected]>
Save and exit
gpg> save
Now if you list your keys you will see also a subkey (sub) with SEA capabilities (Sign - Encrypt - Authenticate)
▶ gpg --list-keys
/Users/mattiacattarinussi/.gnupg/pubring.kbx
--------------------------------------------
pub rsa4096 2018-07-27 [C] [expires: 2019-07-27]
F8DD1C85581AB87675EF97444EF9EF4CDBD7AB1B
uid [ultimate] Mattia Cattarinussi <[email protected]>
sub rsa4096 2018-07-27 [SEA] [expires: 2019-07-27]
Enable the gpg-agent ssh support
▶ echo enable-ssh-support >> $HOME/.gnupg/gpg-agent.conf
Set SSH_AUTH_SOCK so that SSH will use gpg-agent instead of ssh-agent. Add this to tour bashprofile or zshrc
unset SSH_AGENT_PID
if [ "${gnupg_SSH_AUTH_SOCK_by:-0}" -ne $$ ]; then
export SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"
fi
export GPG_TTY=$(tty)
gpg-connect-agent updatestartuptty /bye >/dev/nullEnable the gpg subkey for ssh authentication:
-
Get the subkey keygrip
▶ gpg --list-keys --with-keygrip /Users/mattiacattarinussi/.gnupg/pubring.kbx -------------------------------------------- pub rsa4096 2018-07-27 [C] [expires: 2019-07-27] F8DD1C85581AB87675EF97444EF9EF4CDBD7AB1B Keygrip = 22DBE374608C6220B321D3A2543F3806FF63A49D uid [ultimate] Mattia Cattarinussi <[email protected]> sub rsa4096 2018-07-27 [SEA] [expires: 2019-07-27] Keygrip = A55719832AF939C531BACFFABB2A47B52FFBBF43 -
Add the keygrip of your subkey in the list of approved keys
▶ echo A55719832AF939C531BACFFABB2A47B52FFBBF43 >> ~/.gnupg/sshcontrol
Check if the key is present in the ssh identities list
▶ ssh-add -l
4096 SHA256:bCVzkgaoGSqJC89hZ/8gclTn7ENN/dJ+mZBBw2zJFuI (none) (RSA)
Retrieve the public ssh key for the subkey
▶ gpg --export-ssh-key mattia
ssh-rsa <A_LOT_OF_STUFF_HERE> openpgp:0xA2E43D00
You can test if the key is working with your Github account. The ssh public key generated in the previous step has to be added to your Github SSH keys.
▶ ssh -T [email protected]
Hi mcattarinussi! You've successfully authenticated, but GitHub does not provide shell access.
Export the secret master key
▶ gpg -a --export-secret-keys > master-secret-key.gpg
Export all the secret subkeys
▶ gpg -a --export-secret-subkeys > sub-secret-keys.gpg
Save master-secret-key.gpg and sub-secret-keys.gpg on a physical device.
Delete the secret keys (you need to delete all the subkeys as well)
▶ gpg --delete-secret-key mattia
Enter the master password and confirm the deletion in the subsequent confirmation dialogs.
Restore the subkeys
▶ gpg --import sub-secret-keys.gpg
Check the result
▶ gpg --list-secret-keys
/Users/mattiacattarinussi/.gnupg/pubring.kbx
--------------------------------------------
sec# rsa4096 2018-09-14 [C] [expires: 2020-09-13]
5615F7C581E8450E34F9031703426E5D827D6A81
uid [ultimate] Mattia Cattarinussi <[email protected]>
ssb rsa4096 2018-09-14 [S] [expires: 2018-09-16]
ssb rsa4096 2018-09-14 [E] [expires: 2020-09-13]
ssb rsa4096 2018-09-14 [A] [expires: 2020-09-13]
The # after the master key means that the key is not stored locally.
-
https://www.esev.com/blog/post/2015-01-pgp-ssh-key-on-yubikey-neo/
-
https://www.linode.com/docs/security/authentication/gpg-key-for-ssh-authentication/
-
https://medium.com/@ahawkins/securing-my-digital-life-gpg-yubikey-ssh-on-macos-5f115cb01266
-
https://www.linode.com/docs/guides/gpg-key-for-ssh-authentication/
-
https://medium.com/@chrispisano/ssh-authentication-with-gpg-411676781647