(un) comment multiple lines vim

vim-multiline-comment.md

From: http://stackoverflow.com/questions/1676632/whats-a-quick-way-to-comment-uncomment-lines-in-vim

For those tasks I use most of the time block selection.

Put your cursor on the first # character, press Ctrl``V (or Ctrl``Q for gVim), and go down until the last commented line and press x, that will delete all the # characters vertically.

For commenting a block of text is almost the same: First, go to the first line you want to comment, press Ctrl``V, and select until the last line. Second, press Shift``I``#``Esc (then give it a second), and it will insert a # character on all selected lines. For the stripped-down version of vim shipped with debian/ubuntu by default, type : s/^/# in the second step instead.

This worked for me

:%s/^/#/g

The above instruction comments out only 1 line at a time. Which you could just do by simply Shift + "I" for insert and then add # in front of the line. I tried both your mentioned methods inc : s/^/# both just comment 1 line. If you also could provide solution for multiple line comment, that would be very helpful.

One has to make sure to press Esc after inserting the # and that will add all the other #'s after the first line.

I just copy-pasted the solution from stack overflow for future reference. I remember it worked for me at the time.

How to uncomment now?

How to uncomment now?

Select the same way as before and then press x to delete the selected characters.

Thanks a lot, now I can flex more while using vim.

The above instruction comments out only 1 line at a time. Which you could just do by simply Shift + "I" for insert and then add # in front of the line. I tried both your mentioned methods inc : s/^/# both just comment 1 line. If you also could provide solution for multiple line comment, that would be very helpful.

@Pari-singh, are you certain that you are using Ctrl-v and not just Shift-v? I myself misread that part, and out of muscle memory used Shift-v. On re-reading, I realised my mistake. Shift-v (i.e. V) is VISUAL LINE mode while Ctrl-v is VISUAL BLOCK mode.

This worked for me

:%s/^/#/g

@cwwaism what if you just want a few lines rather than entire file? Visual blocks easier than line numbers.

@jahooker why do you need capital I? lower case i does not seem to work?

@jahooker why do you need capital I? lower case i does not seem to work?

Not sure, @sureshvv.
That's just how Vim works.
See https://stackoverflow.com/questions/12399572/vim-how-to-insert-in-visual-block-mode and https://vim.fandom.com/wiki/Inserting_text_in_multiple_lines.

@jahooker why do you need capital I? lower case i does not seem to work?

Its because in block selection mode, your selection might be, for example: 7 lines long by 3 columns wide. That makes it ambiguous where vi should place the cursor for inserting.

Shift-I means place the cursor on the left hand side of the block selection
Shift-A means place the cursor on the right hand side of the block selection

These commands of course come from Normal mode, where they mean:-
Shift-I Move to the start of the line and enter insert mode
Shift-A Move to the end of the line and enter insert mode

If you hit : vim and shows something like :'<,'> you need to do something like this:

SHIFT + v and select the code block
: you are gonna see something like this :'<,'> add to see :'<,'>s/^/#/ and hit enter

This worked for me
:%s/^/#/g

@cwwaism what if you just want a few lines rather than entire file? Visual blocks easier than line numbers.

If you just want for certain lines do this. This will comment lines 7 to 10 and you can change it accordingly.
:7,10s/^/#/g

It wont work ,after entering # all lines are unselected

Very useful tip !

For me "Ctrl + v" > "Shift + i" > "#" > "Esc" sequence did not work iv VI , but worked in VIM (on the same OEL 8 host)