Sinope TH1123ZB-G2 and Home Assistant + zigbee2mqtt

TH1123ZB-G2.md

Keep information on the TH1123ZB-G2 screen up to date with Home Assistant and z2m.

Should work with other sinope thermostat like the TH1124ZB.

• You need to manually push outdoor temperature.
• Time generally work without this but it will go blank randomly or out of sync at some point (won't change for DST for example).

thermostat_screen_data.yml

alias: Thermostat Push Screen Data
sequence:
  - repeat:
      for_each:
        - thermostat_name: Office Thermostat
        - thermostat_name: Living Room Thermostat
        - thermostat_name: Kitchen Thermostat
        - thermostat_name: Guest Room Thermostat
        - thermostat_name: Bedroom Thermostat
      sequence:
        - service: mqtt.publish
          data:
            topic: >-
              zigbee2mqtt/{{ repeat.item.thermostat_name
              }}/set/enable_outdoor_temperature
            payload_template: "ON"
            qos: 1
            retain: true
        - service: mqtt.publish
          data:
            topic: >-
              zigbee2mqtt/{{ repeat.item.thermostat_name
              }}/set/outdoor_temperature_timeout
            payload_template: 99999
            qos: 1
            retain: true
        - service: mqtt.publish
          data:
            topic: >-
              zigbee2mqtt/{{ repeat.item.thermostat_name
              }}/set/thermostat_outdoor_temperature
            payload_template: >-
              {{ states('sensor.montreal_temperature') | float | round(1,
              'half', 0) }}
            qos: 1
            retain: true
        - service: mqtt.publish
          data:
            topic: zigbee2mqtt/{{ repeat.item.thermostat_name }}/set/thermostat_time
            payload_template: ""
            qos: 1
            retain: true