Official Elegoo Neptune 3 Cura Machine Profile

elegoo_neptune_3.def.json

{
  "version": 2,
  "name": "ELEGOO NEPTUNE 3",
  "inherits": "fdmprinter",
  "metadata": {
    "visible": true,
    "author": "ELEGOO",
    "manufacturer": "ELEGOO",
    "category": "ELEGOO",
    "file_formats": "text/x-gcode",
    "icon": "wanhao-icon.png",
    "has_materials": true,
    "exclude_materials": ["generic_pla", "generic_pla_g"],
    "preferred_material": "generic_pla",
    "machine_extruder_trains": {
      "0": "custom_extruder_9",
      "1": "custom_extruder_10"
    },
    "platform_offset": [
      0,
      -28,
      5
    ]
  },
  "overrides": {
    "machine_name": {
      "default_value": "ELEGOO NEPTUNE 3"
    },
    "machine_width": {
      "default_value": 235
    },
    "machine_height": {
      "default_value": 285
    },
    "machine_depth": {
      "default_value": 235
    },
    "layer_height":{
      "default_value": 0.2
    },
    "layer_height_0":{
      "default_value": 0.25
    },
	"retraction_combing":{
	  "default_value": "noskin"
	},
	"retraction_combing_max_distance":{
	  "default_value": 10
	},
    "optimize_wall_printing_order":{
      "default_value": true
    },
    "travel_compensate_overlapping_walls_0_enabled":{
      "default_value": false
    },
    "z_seam_type":{
      "default_value": "back"
    },
    "z_seam_corner":{
      "default_value": "z_seam_corner_weighted"
    },
    "material_initial_print_temperature":{
      "default_value": 205,
      "value": "max(-273.15, material_print_temperature)"
    },
    "material_final_print_temperature":{
      "default_value": 205,
      "value": "max(-273.15, material_print_temperature)"
    },
    "wall_thickness":{
      "default_value": 1.2
    },
    "wall_line_count":{
      "default_value": 3
    },
    "top_bottom_thickness":{
      "default_value": 1.2
    },
    "top_thickness":{
      "default_value": 1.2
    },
    "bottom_thickness":{
      "default_value": 1.2
    },
    "infill_sparse_density":{
      "default_value": 15
    },
    "machine_heated_bed": {
      "default_value": true
    },
    "speed_print":{
      "default_value": 50
    },
    "material_print_temperature":{
      "default_value": 205
    },
    "material_standby_temperature":{
      "default_value": 205,
      "settable_per_extruder": false
    },
    "speed_wall_x":{
      "default_value": 25,
      "value": "speed_wall"
    },
    "speed_travel":{
      "default_value": 70,
      "value": "speed_print if magic_spiralize else 70"
    },
    "speed_print_layer_0":{
      "default_value": 20,
      "value": "speed_layer_0 - 5"
    },
    "retraction_enable":{
      "default_value": true
    },
    "retraction_amount":{
      "default_value": 5
    },
    "retraction_speed":{
      "default_value": 45
    },
    "adhesion_type":{
      "default_value": "skirt"
    },
    "adhesion_extruder_nr":{
      "default_value": "0",
      "value": "int(1) if extruders_enabled_count > 1 else int(0)"
    },
    "switch_extruder_retraction_amount":{
      "default_value": 10,
      "value": "10 if extruders_enabled_count > 1 else machine_heat_zone_length"
    },
    "raft_margin":{
      "default_value": 5
    },
    "raft_airgap":{
    	"default_value": 0.25
    },
    "brim_width":{
      "default_value": 5
    },
    "retraction_hop_enabled":{
      "default_value": false
    },
    "support_infill_rate":{
    	"default_value": 15
    },
    "prime_tower_enable": {
      "default_value": true
    },
    "prime_tower_size": {
      "default_value": 30
    },
    "prime_tower_min_volume":{
      "default_value": 90
    },
    "machine_gcode_flavor": {
      "default_value": "RepRap (Marlin/Sprinter)"
    },
    "machine_start_gcode": {
      "default_value": "G28 ;home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X1.1 Y80.0 Z0.28 F1500.0 E10 ;Draw the first line\nG1 X1.4 Y80.0 Z0.28 F5000.0 ;Move to side a little\nG1 X1.4 Y20 Z0.28 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up",
      "value": "machine_start_gcode_1 if machine_extruder_count > 1 else machine_start_gcode_2"
    },
    "machine_end_gcode": {
      "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
      "value": "machine_end_gcode_1 if machine_extruder_count > 1 else machine_end_gcode_0"
    }
  }
}