Android - Enable ADB from recovery

Android - Enable ADB from recovery.md

Android - Enable ADB from recovery

Credits to @TheOnlyAnil-@Firelord¹

• Requirements: a) stock recovery + rooted phone b) custom recovery

• Files changed:

  • /system/build.prop
  • /data/property/persist.sys.usb.config
  • /data/misc/adb/adb_keys

Enable ADB (1/2): enable USB debugging

same as "Settings >> Developer Opcions >> USB debugging" ON

• Connect the device to Mac or PC in recovery mode.
• Now open terminal/CMD in computer and go to platform-tools/. type and enter adb devices to check if the device is connected in recovery mode.
• Now type adb shell mount data and adb shell mount system to mount the respective directories.
• Get the persist.sys.usb.config file in your system using adb pull /data/property/persist.sys.usb.config /Your directory
• Now open that file in a texteditor and edit it to mtp,adb and save.
• Now push the file back in the device; adb push /your-directory/persist.sys.usb.config /data/property
• Get the build.prop file; adb pull /system/build.prop /your-directory
• Add these lines:

persist.service.adb.enable=1                                                    
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb

• Push build.prop back into the device; adb push /your-dir/build.prop /system/

Fast way

adb shell
mount data
echo -n 'mtp,adb' > /data/property/persist.sys.usb.config

Verify options are not present before do it: adb shell "grep 'persist.service.adb.enable' /system/build.prop"

adb shell
mount system
echo '' >> /system/build.prop
echo '# Enable ADB' >> /system/build.prop
echo 'persist.service.adb.enable=1' >> /system/build.prop 
echo 'persist.service.debuggable=1' >> /system/build.prop
echo 'persist.sys.usb.config=mtp,adb' >> /system/build.prop 

Enable ADB (2/2): RSA verification

For the RSA verification that you asked to bypass, I don't know whether it would work in your device, but it worked in my little experiment. In Lollipop, the ADB keys (after authorization) are saved in /data/misc/adb/adb_keys. Your private key is saved in computer. In Linux the directory location is $HOME/.android/. On Windows that usually translates to %USERPROFILE%.android, but keys might end up in C:\Windows\System32\config\systemprofile.android in some cases.

adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys

Bibliography

Footnotes

1. http://android.stackexchange.com/questions/120394/can-i-enable-usb-debugging-using-adb ↩

You're a lifesaver.
Thanks.

Alternative method to not have to modify /system/build.prop:

echo 'persist.service.adb.enable=1' >> /data/property/persistent_properties
echo 'persist.service.debuggable=1' >> /data/property/persistent_properties
echo 'persist.sys.usb.config=mtp,adb' >> /data/property/persistent_properties

I appear to have some troube with the instructions on my Samsung Galaxy S6 with LineageOS 17. It appear to be that build.prop is not present while in recovery mode. Probably it exists once the system is booted, but appearently not on the recovery. I anyway executed all the commands (i had to create the build.prop), but got no succes after booting the system.
Is there any other way to enable USB debugging?

Mount /system

Mount /system

System is mounted. I can see all files, but there is no build.prop

Problem solved. build.prop was located in /system/system

Thanks I wasnt able to keep my phone on for a few seconds so I couldnt enable adb and now it fixed both problems

ok what if your device isnt recognized? is there a way to ENABLE adb through download mode or revovery mode, adb devices would show?

Problem solved. build.prop was located in /system/system

On LineageOS 20 I needed to do

mount -o rw,seclabel,relatime /dev/block/dm-1 /mnt/system

because mount system did not work.

And then

echo '' >> /mnt/system/system/build.prop
echo '# Enable ADB' >> /mnt/system/system/build.prop
echo 'persist.service.adb.enable=1' >> /mnt/system/system/build.prop 
echo 'persist.service.debuggable=1' >> /mnt/system/system/build.prop
echo 'persist.sys.usb.config=mtp,adb' >> /mnt/system/system/build.prop 

@ValorNaram thats pretty smart but why am i still getting notified for this

I think you get notifications if you commented once

/system is twrp system. To mount android /system use mount /system_root.

On LineageOS 20 I needed to do

How did you do the RSA verification? Isn't the /data partition encrypted by default on LineageOS 20?

hello guys, i make first file inside data/property/persist.sys.usb.config >> "mtp, adb"

next add inside /system_root/system/build.prop >>

"persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb"

as i understand right now my phone should receive adb commands from terminal , but it's not. Why?

i tries to enter ./adb command

/system/bin/sh: appops: inaccessible or not found

android 14

i'm on the galaxy s23+

who did this on newer phones?

adb shell rm /data/property/persistent_properties instead of (or in addition to) echo -n 'mtp,adb' > /data/property/persist.sys.usb.config worked for me

I create Magisk Module for this, check this out. https://github.com/lexavey/Adb-Root-Enabler

Hi guys, I am on lineageos 9. I managed to get usb debugging enabled through twrp, but I can't seem to bypass the RSA verification even though I have copied the key as mentioned above. Unfortunately, I don't have magisk installed, but is there a way to install the unauthorized adb manually through twrp?

Thanks to all, especially the threadstarter for the idea. And a special thanks to @nift4 for the final trick with deleting or renaming the persistent_properties. That did the trick finally.

I create Magisk Module for this, check this out. https://github.com/lexavey/Adb-Root-Enabler

Hi guys, I am on lineageos 9. I managed to get usb debugging enabled through twrp, but I can't seem to bypass the RSA verification even though I have copied the key as mentioned above. Unfortunately, I don't have magisk installed, but is there a way to install the unauthorized adb manually through twrp?

Edit build prop, need command twrp mount /system
Pull adb public key to data/misc/adb
And this
echo "1" > /data/property/persist.service.adb.enable
echo "1" > /data/property/persist.service.debuggable
echo "mtp,adb" > /data/property/persist.sys.usb.config

To generate adbkey.pub from adbkey file

(base) ➜ pwd
/home/xyx/.android
(base) ➜ adb pubkey adbkey > adbkey.pub
(base) ➜ adb push adbkey.pub /data/misc/adb/adb_keys

Hello everyone, I have successfully implemented it on the Xiaomi 8 Dipper（lineageos 21 ）. The main steps are as follows,
in twrp ：
mount /system_root

adb pull /system_root/system/build.prop build.prop

`
persist.service.adb.enable=1

persist.service.debuggable=1

persist.sys.usb.config=adb

ro.adb.secure=0
`

adb push build.prop /system_root/system/build.prop

mount /vendor
adb pull /vendor/etc/fstab.qcom fstab.qcom

移除fstab.qcom中的加密配置fileencryption=ice,
adb push fstab.qcom /vendor/etc/fstab.qcom
`
reboot

If your system is readonly, need magisk and service.d to run prop value