NextThingCo C.H.I.P. Flashing guide as of November, 2018

chip-flashing-guide-nov-2018.md

Below are the steps required to flash a NextThingCo CHIP or PocketCHIP from the command line, as of November 2018. The web flasher no longer works, and there are numerous errors when flashing from the command line, mostly due to broken dependencies. The following method works for flashing a CHIP as of November 2018:

Note: Flashing must be done on Linux. Tested on Ubuntu and Rasparian. Mac OS seems to not work.

1. Download and unpack the CHIP-SDK.zip from one of the following:

• https://archive.org/details/C.h.i.p.FlashCollection
• https://github.com/NextThingCo/CHIP-SDK
• https://github.com/Project-chip-crumbs/CHIP-SDK

2. Download and unpack CHIP-tools.zip from one of the following:

• https://archive.org/details/C.h.i.p.FlashCollection
• https://github.com/NextThingCo/CHIP-tools-backup
• https://github.com/Project-chip-crumbs/CHIP-tools

3. Move the CHIP-tools directory inside CHIP-SDK directory (CHIP-SDK/CHIP-tools).

4. Download the a CHIP image from one of the following:

• https://archive.org/details/C.h.i.p.FlashCollection (.zip contains all CHIP image variants)
• https://dl.bintray.com/yoursunny/CHIP/ (can download individual CHIP images)

Unzip it (if necessary) and move the desired image into the CHIP-SDK directory. In my case since I'm flashing the Pocketchip I used the stable-pocketchip-b128 image and I put it at CHIP-SDK/stable-pocketchip-b128.

5. Navigate to the CHIP-SDK directory in terminal and run the build script: ./setup_ubuntu1404.sh The build script should run. Multiple errors will be shown, including a fatal error when the script tries to get the CHIP-tools from a non-existant repo. This can be ignored since we already downloaded the CHIP-tools directory in step 2.

6. Put your CHIP in FEL mode by putting a jumper wire between GND and FEL. Connect the CHIP to your computer with USB (using the microUSB port on the CHIP, not the fullsize USB port).

7. Navigate to the CHIP-tools directory in terminal at CHIP-SDK/CHIP-tools and run the update firmware script. Use the -L option to explicitly specify the firmware versions from the flash-collection directory: ./chip-update-firmware.sh -L ../stable-pocketchip-b128

References:

• http://www.chip-community.org/index.php/Flash_from_command_line

and in which file do you do it, I need to flash my CHIP but it is having a hard time

only this two string in the three files: chip-fel-flash.sh, chip-flash, common.sh.

Perfect I just have to delete the following -i 0x1f3a
and also u

@Alexander323Ch @Lorenz74 The coincidence of this conversation going on the day I decide to look into flashing one myself. Which OS did you attempt this on exactly?

I am trying to flash the chip in ubuntu in its most current version

and currently they do not work for me in the git clone method https://github.com/thore-krug/Flash-CHIP.git

In that method it shows me errors such as time out or the most common one that is invalid option "i"

can someone help me i'm giving up on this and i'm new to this world

Hi...below the instructions, this works also on current Ubuntu Version (the step 8 is the one that allow to flash NTC CHIP also on the most updated Ubuntu versions).

Below are the steps required to flash a NextThingCo CHIP or PocketCHIP from the command line, as of January 2023 (Ubuntu 22.10 Tested). The web flasher no longer works, and there are numerous errors when flashing from the command line, mostly due to broken dependencies. The following method works for flashing a CHIP as of January 2023:

Note: Flashing must be done on Linux. Tested on Ubuntu.

1. Download and unpack the CHIP-SDK.zip from one of the following:

• https://archive.org/details/C.h.i.p.FlashCollection
• https://github.com/NextThingCo/CHIP-SDK
• https://github.com/Project-chip-crumbs/CHIP-SDK

2. Download and unpack CHIP-tools.zip from one of the following:

• https://archive.org/details/C.h.i.p.FlashCollection
• https://github.com/Project-chip-crumbs/CHIP-tools

3. Move the CHIP-tools directory inside CHIP-SDK directory (CHIP-SDK/CHIP-tools).

4. Download a CHIP image from one of the following:

• https://archive.org/details/C.h.i.p.FlashCollection (.zip contains all CHIP image variants)
• https://dl.bintray.com/yoursunny/CHIP/ (can download individual CHIP images)

Unzip it (if necessary) and move the desired image into the CHIP-SDK directory. In my case since I'm flashing the NTC CHIP I used the stable-server-b149 image and I put it at CHIP-SDK/stable-server-b149.

5. Navigate to the CHIP-SDK directory in terminal and run the build script: ./setup_ubuntu1404.sh The build script should run. Multiple errors will be shown, including a fatal error when the script tries to get the CHIP-tools from a non-existant repo. This can be ignored since we already downloaded the CHIP-tools directory in step 2.

6. Put your CHIP in FEL mode by putting a jumper wire between GND and FEL. (see image below)
   https://ksr-ugc.imgix.net/assets/005/256/895/d2cdca49fbc785b4f636bedaf96b383d_original.jpg?w=639&fit=max&v=1453875954&auto=format&q=92&s=bff8004fdbb40a01bf0a5e675b8d1641

7. Connect the CHIP to your computer with USB (using the microUSB port on the CHIP, not the fullsize USB port).

8. Navigate to directory CHIP-SDK/CHIP-tools. Open with text editor the following files chip-fel-flash.sh, chip-flash, common.sh and remove the strings “-i 0x1f3a” and “-u”. Save the edited files.

9. Navigate to the CHIP-tools directory in terminal at CHIP-SDK/CHIP-tools and run the update firmware script. Use the -L option to explicitly specify the firmware versions from the flash-collection directory: “sudo ./chip-update-firmware.sh -L ../stable-server-b149”