Installations.md

1. Install CMake 3.5.2 on CentOS 7

   Download Source distributions cmake-3.5.2.tar.gz from https://cmake.org/download/
   ./bootstrap
   gmake
   sudo gmake install
   

2. Install libgpuarray on Centos 7

   git clone https://github.com/Theano/libgpuarray.git
   cd libgpuarray
   mkdir Build
   cd Build
   cmake .. -DCMAKE_BUILD_TYPE=Release
   cd ..
   make
   sudo make install
   

3. install caffe on centos 7

   (1) sudo yum install protobuf-devel leveldb-devel snappy-devel opencv-devel boost-devel hdf5-devel

   (2) sudo yum install gflags-devel glog-devel lmdb-devel

   (3) install openblas

   ```
   git clone https://github.com/xianyi/OpenBLAS
   cd OpenBLAS && make
   sudo make PREFIX=/opt/OpenBLAS install
   export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/OpenBlas/lib/
   ```
   

   (4) Edit Makefile.config

   ```
   cp Makefile.config.example Makefile.config
   BLAS := open
   BLAS_INCLUDE :=  /opt/OpenBLAS/include
   BLAS_LIB := /opt/OpenBLAS/lib
   PYTHON_INCLUDE := /usr/include/python2.7 /usr/lib64/python2.7/site-packages/numpy/core/include/
   ```
   

   (5) Make

   ```
   make all
   make test
   make runtest
   ```
   

   (6) Install python interface

   ```
   cd python
   for req in $(cat requirements.txt); do sudo -E pip install $req; done
   cd ..
   make pycaffe
   ``` 	
   

4. Install Nivida Driver

   (1) sudo rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org

   (2) sudo rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-2.el7.elrepo.noarch.rpm

   (3) sudo yum install nvidia-detect

   (4) nvidia-detect -v

   (5) sudo yum install nvidia-x11-drv nvidia-x11-drv-32bit

   (6) disable Intel on-board graphic through BIOS: Peripheral->Initial Display Output-> PCIe1 shot Peripheral->Intel Processor Graphics->Disabled (7) reboot

5. Install Cuda

   (1) Download cuda-***.run from Nivida

   (2) sudo yum install gcc gcc-c++ kernel-devel

   (3) disable nouveau:

    `sudo vi /etc/modprobe.d/blacklist.conf and add this line to the end of the file: options nouveau modeset=0`
   

   (4) sudo init 3

   (5) chmod cuda-***.run

   (6) sudo ./cuda-***.run

   (7) reboot

6. Install Theano and keras

   sudo yum install python-devel
   sudo pip install theano
   sudo pip install keras
   

7. Install Image

   sudo yum install libtiff-devel libjpeg-devel libzip-devel freetype-devel lcms2-devel libwebp-devel tcl-devel tk-devel
   sudo pip install Image
   

8. Install LAMP on centos

   APpche

   sudo yum install httpd
   sudo service httpd start
   sudo systemctl enable httpd.service
   sudo systemctl restart httpd.service
   

   MYSQL

   sudo yum install mariadb-server
   sudo systemctl enable mariadb.service
   sudo systemctl start mariadb.service
   mysql_secure_installation
   

   PHP

   sudo yum install php php-pear
   sudo yum install php-mysql
   sudo mkdir /var/log/php
   sudo chown apache /var/log/php
   sudo systemctl reload httpd
   

   PHPMyadmin

   sudo -E yum install http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
   sudo -E yum install phpmyadmin
   

9. Install FFmpeg

   Follow the official compilation guide

   Note that libfdk_aac is not open source, so just disable it when configure FFmpeg.

10. How to install cudnn on CentOs

    tar -xzvf cudnn-6.5-linux-R1.tgz
    cd cudnn-6.5-linux-R1
    sudo cp lib* /usr/local/cuda/lib64/
    sudo cp cudnn.h /usr/local/cuda/include/
    

11. RabbitMQ

    sudo -E yum -y install rabbitmq-server
    systemctl start rabbitmq-server