Bill Doyle vilhalmer

Disclaimer: Please follow this guide being aware of the fact that I'm not an expert regarding the things outlined below, however I made my best attempt. A few people in IRC confirmed it worked for them and the results looked acceptable.

Attention: After following all the steps run gdk-pixbuf-query-loaders --update-cache as root, this prevents various gdk-related bugs that have been reported in the last few hours. Symptoms are varied, and for Cinnamon the DE fails to start entirely while for XFCE the icon theme seemingly can't be changed anymore etc.

Check the gist's comments for any further tips and instructions, especially if you are running into problems!

Screenshots

Results after following the guide as of 11.01.2017 13:08:

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

Prerequisites : the letsencrypt CLI tool

This method allows your to generate and renew your Lets Encrypt certificates with 1 command. This is easily automatable to renew each 60 days, as advised.

You need nginx to answer on port 80 on all the domains you want a certificate for. Then you need to serve the challenge used by letsencrypt on /.well-known/acme-challenge. Then we invoke the letsencrypt command, telling the tool to write the challenge files in the directory we used as a root in the nginx configuration.

I redirect all HTTP requests on HTTPS, so my nginx config looks like :

server {

	DDC/CI Command Codes (antiquated MStar function, not real):
	------
	0xCC, 0xF1, 0xF0 - LG special? Only CC actually used.
	3
	1
	0xC6
	0xC8
	0xF3
	0xF5
	0xB1

	irsend.sendNEC( 0x57E318E7, 32);

	// E817 power
	// 18E7 power off
	// 16E9 power on
	// 21DE hdmi1
	// 22DD hdmi 2
	// 23DC hdmi 3

	// F00F vol up

	font pango:Inconsolata B 14

	focus_follows_mouse no
	gaps edge_gaps on
	gaps 1
	hide_edge_borders smart
	default_border pixel
	seamless_mouse off
	#font Inconsolata-dz for Powerline 14

	macro_rules! parsable_enum {
	($(#[$attrs:meta])* enum $name:ident { $($member:ident),*}) =>
	(parsable_enum! { $(#[$attrs])* enum $name { $($member),* ,}});
	($(#[$attrs:meta])* enum $name:ident { $($member:ident),* , }) => {
	$(#[$attrs])*
	pub enum $name {
	$($member),+
	}

	use std::str::FromStr;

	#!/bin/bash
	# Automatically setup routing and DNS for a PiZero connected over a USB-network
	# NOTE: Before running this script for the first time, you need to run the
	# following two commands on your Linux PC
	# sudo sysctl -w net.ipv4.ip_forward=1
	# sudo iptables -t nat -A POSTROUTING -s 169.254.0.0/16 -o eth0 -j MASQUERADE
	# (replace eth0 in the second command with your internet-facing network device,
	# e.g. wlan0 on a laptop)

	# The Avahi-discovered hostname

	"""""""""""""""""""""""""""""
	" Files, backups, undo, etc.
	"""""""""""""""""""""""""""""
	set nocompatible
	set encoding=utf8
	set ffs=unix,dos,mac
	set nobackup
	set nowb
	set noswapfile