jetkvm/dc-extension-firmware#1
solution/workaround from https://discord.com/channels/1270105230989594634/1367610331806957699/1367624533598802011
Jared Jones — 02.05.25 0:11 Instructions to update your DC Extension to Power on by Default
- Unplug everything from the DC extension and bring it over to your PC
- Find a USB-C to USB-C (or) USB-A to USB-C cable and attach one end to your PC.
- Find a SIMTool/Ear Ring insert it in the small hole on the DC extension and hold. While holding, attach the USB-C cable to the DC extension.
- In Windows explorer or macOS Finder you will see a new volume appear that is a 128MB FAT volume.
- Drag and drop this new firmware file jetkvm-dc.uf2 I compiled onto the device. After the file is copied you should see the volume automatically unmount and disappear. This means that the firmware was installed properly.
- Done! Unplug it from your PC and attach it back to your JetKVM and observe that passthrough power is on by default! Typ souboru v příloze: unknown
JetKVM UF2 zip: