Xiaomi MJXDD01YL Ceiling lamp esphome config

# Config for Xiaomi MJXDD01YL Ceiling lamp
# modified to have esp32 instead of mediatek chip.
#
# Based on: https://github.com/syssi/esphome-yeelight-ceiling-light
# See: https://github.com/syssi/esphome-yeelight-ceiling-light/issues/10
---
substitutions:
  uname: Room2 Ceiling Light
  device_name: room2-ceiling-light
  friendly_name: $uname
  device_description: "Room2 Ceiling Lamp"

esphome:
  name: '${device_name}'
  comment: '${device_description}'
  project:
    name: "vooon.mjxdd01yl_lamp"
    version: "1.0.0"

  on_boot:
    - script.execute: power_on_scr

esp32:
  # board: esp32doit-devkit-v1
  board: ttgo-t7-v13-mini32
  framework:
    type: esp-idf
    version: recommended
    # sdkconfig_options:
    #   CONFIG_FREERTOS_UNICORE: y
    # advanced:
    #   ignore_efuse_mac_crc: true

wifi:
  networks: !secret wifi_networks

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${uname} Fallback"
    password: !secret wifi_ap_passwd

ota:
  password: !secret ota_password

# Enable logging
logger:

# debug:

# Enable Home Assistant API
api:
  id: api_apiserver
  password: !secret api_password
  reboot_timeout: 5min

# web_server:
#   auth:
#     username: admin
#     password: !secret web_password

# prometheus:

preferences:
  # id: preferences
  flash_write_interval: 60s

esp32_ble_tracker:
  id: ble_tracker
  scan_parameters:
    # interval: 100ms
    # window: 99ms
    duration: 5min
    active: false

time:
  - platform: homeassistant
    id: esp_time
  - platform: sntp
    id: ntp_time
    timezone: Europe/Moscow

power_supply:
  - id: power_supply1
    pin: GPIO22

output:
  - platform: ledc
    pin: GPIO19
    id: output_warm
    frequency: "2441Hz"
    # min_power: 0.14
    max_power: 0.50
    power_supply: power_supply1
  - platform: ledc
    pin: GPIO23
    id: output_cold
    frequency: "2441Hz"
    # min_power: 0.20
    max_power: 0.88
    power_supply: power_supply1
  - platform: ledc
    pin: GPIO18
    id: output_nightlight
    frequency: "19531Hz"
    # min_power: 0.10
    max_power: 1.00
    power_supply: power_supply1

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "${friendly_name} - IP Address"
      icon: mdi:wifi
    ssid:
      name: "${friendly_name} - Connected SSID"
      icon: mdi:wifi-strength-2
    bssid:
      name: "${friendly_name} - BSSID"

  - platform: version
    hide_timestamp: true
    name: "${friendly_name} - ESPHome Version"

  - platform: ble_scanner
    name: "${friendly_name} - BLE Scanner"

binary_sensor:
  - platform: status
    name: "$uname - Connected"

sensor:
  - platform: wifi_signal
    name: "$uname - WiFi Signal"
    update_interval: 10s

  - platform: uptime
    name: "$uname - Uptime"

light:
  - platform: monochromatic
    name: "${uname} - Night Light"
    id: night_light
    output: output_nightlight
    gamma_correct: 0
    on_turn_on:
      - light.turn_off: ceiling_light

  - platform: cwww
    name: "${uname} - Ceiling Light"
    id: ceiling_light
    cold_white: output_cold
    warm_white: output_warm
    cold_white_color_temperature: 6000 K
    warm_white_color_temperature: 2700 K
    constant_brightness: true
    gamma_correct: 0
    restore_mode: RESTORE_INVERTED_DEFAULT_ON
    on_turn_on:
      - light.turn_off: night_light
    effects:
      - random:
      - pulse:
      - strobe:
      - flicker:

switch:
  - platform: restart
    name: "$uname - Reboot"

script:
  - id: power_on_scr
    then:
      - logger.log:
          level: INFO
          format: "Power is ON!"
      # - light.turn_on: ceiling_light