waitman

--- sbin/Makefile	2015-07-04 07:26:20.000000000 -0700
+++ updates/src/sbin/Makefile	2015-07-04 10:47:16.664406000 -0700
@@ -49,6 +49,7 @@
 	mount_nfs \
 	mount_nullfs \
 	mount_udf \
+	mount_udf2 \
 	mount_unionfs \
 	newfs \
 	newfs_msdos \

waitman

#include <stdio.h>
#include <stdlib.h>
#include <err.h>
#include <fcntl.h>
#include <kvm.h>
#include <limits.h>
#include <nlist.h>

waitman

> HCI Event: Connect Request(0x04) plen 10
  FF 0F 13 86 44 BC 0C 02 5A 01 
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
  FF 0F 13 86 44 BC 00 
> HCI Event: Command Status(0x0f) plen 4
  00 01 09 04 
> HCI Event: Role Change(0x12) plen 8
  00 FF 0F 13 86 44 BC 00 
> HCI Event: Connect Complete(0x03) plen 11
  00 43 00 FF 0F 13 86 44 BC 01 00 

waitman

> HCI Event: Connect Request(0x04) plen 10
  4C AE 06 DC 1B 00 0C 01 2A 01 
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
  4C AE 06 DC 1B 00 00 
> HCI Event: Command Status(0x0f) plen 4
  00 01 09 04 
> HCI Event: Role Change(0x12) plen 8
  00 4C AE 06 DC 1B 00 00 
> HCI Event: Connect Complete(0x03) plen 11
  00 43 00 4C AE 06 DC 1B 00 01 00 

waitman

> ACL data: handle 0x0047 flags 0x02 dlen 24
    L2CAP(d): cid 0x1bc len 20 [psm 1]
        SDP SSA Req: tid 0x0 len 0xf
          pat uuid-16 0x0100 (L2CAP)
          max 0xf0
          aid(s) 0x0000 - 0xffff
          cont 00 
< ACL data: handle 0x0047 flags 0x02 dlen 251
    L2CAP(d): cid 0x41 len 247 [psm 1]
        SDP SSA Rsp: tid 0x0 len 0xf2

waitman

# hcidump -x
HCIDump - HCI packet analyzer ver 1.5
device: any snap_len: 65535 filter: 0xffffffffffffffff
> HCI Event: Connect Request(0x04) plen 10
  FF 0F 13 86 44 BC 0C 02 5A 01 
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
  FF 0F 13 86 44 BC 00 
> HCI Event: Command Status(0x0f) plen 4
  00 01 09 04 
> HCI Event: Role Change(0x12) plen 8

waitman

First scan for available bt devices. This will report the BD_ADDR of each advertised interface on the network.

# hccontrol -n ubt0hci inquiry

Inquiry result, num_responses=1
Inquiry result #0
        BD_ADDR: 00:1b:dc:06:94:d3
        Page Scan Rep. Mode: 0x1

waitman

# uname -a
FreeBSD blynk.waitman.net 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r275492: Fri Dec  5 06:52:11 PST 2014     [email protected]:/usr/obj/usr/src/sys/BLYNK  amd64


# usbconfig -d 0.5 dump_device_desc
ugen0.5: <CSR8510 A10 vendor 0x0a12> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

  bLength = 0x0012 
  bDescriptorType = 0x0001 

waitman

# uname -a
FreeBSD rpidev.waitman.net 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r277133: Tue Jan 13 10:01:51 PST 2015     [email protected]:/usr/obj/usr/src/sys/RPIDEV  amd64

ubt0: <vendor 0x0a12 CSR8510 A10, class 224/1, rev 2.00/88.91, addr 2> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()

# hccontrol -n ubt0hci inquiry
Inquiry result, num_responses=1
Inquiry result #0

waitman

> ACL data: handle 0x0048 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0089 flags 0x0000 result 0 clen 0
> ACL data: handle 0x0048 flags 0x02 dlen 33
    L2CAP(d): cid 0x89 len 29 [psm 1]
        SDP SSA Req: tid 0x0 len 0x18
          pat uuid-16 0x1002 (PubBrwsGrp)
          max 0xffff
          aid(s) 0x0000 (SrvRecHndl) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList) 0x0009 (BTProfileDescList)
          cont 00 
< ACL data: handle 0x0048 flags 0x02 dlen 131