windix · May 27, 2012 10:33 · delef · Jul 25, 2014
diff --git a/fastcgi_params b/fastcgi_params
 fastcgi_param  QUERY_STRING       $query_string;
 fastcgi_param  REQUEST_METHOD     $request_method;
 fastcgi_param  CONTENT_TYPE       $content_type;
 fastcgi_param  CONTENT_LENGTH     $content_length;

 fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
 fastcgi_param  PATH_INFO	        $fastcgi_script_name;

 fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
 fastcgi_param  REQUEST_URI        $request_uri;
 fastcgi_param  DOCUMENT_URI       $document_uri;
 fastcgi_param  DOCUMENT_ROOT      $document_root;
 fastcgi_param  SERVER_PROTOCOL    $server_protocol;
 fastcgi_param  HTTPS              $https if_not_empty;

 fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
 fastcgi_param  SERVER_SOFTWARE    nginx/$nginx_version;

 fastcgi_param  REMOTE_ADDR        $remote_addr;
 fastcgi_param  REMOTE_PORT        $remote_port;
 fastcgi_param  SERVER_ADDR        $server_addr;
 fastcgi_param  SERVER_PORT        $server_port;
 fastcgi_param  SERVER_NAME        $server_name;

 # PHP only, required if PHP was built with --enable-force-cgi-redirect
 fastcgi_param  REDIRECT_STATUS    200;
diff --git a/p.windix.org.conf b/p.windix.org.conf
 server {
  include /usr/local/nginx/conf/site_template;
  
  server_name p.windix.org php.windix.org;
  access_log logs/p.windix.org-access.log combined;
  error_log logs/p.windix.org-error.log crit;
  
  root /var/www/p.windix.org;
  index index.html index.php;
  autoindex on;

  # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
  #
  location ~ \.php$ {
    try_files     $uri /index.php;
    fastcgi_index  index.php;
    include        /usr/local/nginx/conf/fastcgi_params;

    if (-f $request_filename) {
      # fastcgi_pass   127.0.0.1:9000;
      fastcgi_pass   unix:/var/run/php5-fpm.sock;
    }
  }
 }
diff --git a/php-fpm.conf b/php-fpm.conf
 ;;;;;;;;;;;;;;;;;;;;;
 ; FPM Configuration ;
 ;;;;;;;;;;;;;;;;;;;;;

 ; All relative paths in this configuration file are relative to PHP's install
 ; prefix (/usr). This prefix can be dynamicaly changed by using the
 ; '-p' argument from the command line.

 ; Include one or more files. If glob(3) exists, it is used to include a bunch of
 ; files from a glob(3) pattern. This directive can be used everywhere in the
 ; file.
 ; Relative path can also be used. They will be prefixed by:
 ;  - the global prefix if it's been set (-p arguement)
 ;  - /usr otherwise
 ;include=/etc/php5/fpm/*.conf

 ;;;;;;;;;;;;;;;;;;
 ; Global Options ;
 ;;;;;;;;;;;;;;;;;;

 [global]
 ; Pid file
 ; Note: the default prefix is /var
 ; Default Value: none
 pid = /var/run/php5-fpm.pid

 ; Error log file
 ; If it's set to "syslog", log is sent to syslogd instead of being written
 ; in a local file.
 ; Note: the default prefix is /var
 ; Default Value: log/php-fpm.log
 error_log = /var/log/php5-fpm.log

 ; syslog_facility is used to specify what type of program is logging the
 ; message. This lets syslogd specify that messages from different facilities
 ; will be handled differently.
 ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
 ; Default Value: daemon
 ;syslog.facility = daemon

 ; syslog_ident is prepended to every message. If you have multiple FPM
 ; instances running on the same server, you can change the default value
 ; which must suit common needs.
 ; Default Value: php-fpm
 ;syslog.ident = php-fpm

 ; Log level
 ; Possible Values: alert, error, warning, notice, debug
 ; Default Value: notice
 ;log_level = notice

 ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
 ; interval set by emergency_restart_interval then FPM will restart. A value
 ; of '0' means 'Off'.
 ; Default Value: 0
 ;emergency_restart_threshold = 0

 ; Interval of time used by emergency_restart_interval to determine when 
 ; a graceful restart will be initiated.  This can be useful to work around
 ; accidental corruptions in an accelerator's shared memory.
 ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
 ; Default Unit: seconds
 ; Default Value: 0
 ;emergency_restart_interval = 0

 ; Time limit for child processes to wait for a reaction on signals from master.
 ; Available units: s(econds), m(inutes), h(ours), or d(ays)
 ; Default Unit: seconds
 ; Default Value: 0
 ;process_control_timeout = 0

 ; The maximum number of processes FPM will fork. This has been design to control
 ; the global number of processes when using dynamic PM within a lot of pools.
 ; Use it with caution.
 ; Note: A value of 0 indicates no limit
 ; Default Value: 0
 ; process.max = 128

 ; Specify the nice(2) priority to apply to the master process (only if set)
 ; The value can vary from -19 (highest priority) to 20 (lower priority)
 ; Note: - It will only work if the FPM master process is launched as root
 ;       - The pool process will inherit the master process priority
 ;         unless it specified otherwise
 ; Default Value: no set
 ; process.priority = -19

 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
 ; Default Value: yes
 ;daemonize = yes
 
 ; Set open file descriptor rlimit for the master process.
 ; Default Value: system defined value
 ;rlimit_files = 1024
 
 ; Set max core size rlimit for the master process.
 ; Possible Values: 'unlimited' or an integer greater or equal to 0
 ; Default Value: system defined value
 ;rlimit_core = 0

 ; Specify the event mechanism FPM will use. The following is available:
 ; - select     (any POSIX os)
 ; - poll       (any POSIX os)
 ; - epoll      (linux >= 2.5.44)
 ; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
 ; - /dev/poll  (Solaris >= 7)
 ; - port       (Solaris >= 10)
 ; Default Value: not set (auto detection)
 ; events.mechanism = epoll

 ;;;;;;;;;;;;;;;;;;;;
 ; Pool Definitions ; 
 ;;;;;;;;;;;;;;;;;;;;

 ; Multiple pools of child processes may be started with different listening
 ; ports and different management options.  The name of the pool will be
 ; used in logs and stats. There is no limitation on the number of pools which
 ; FPM can handle. Your system will tell you anyway :)

 ; To configure the pools it is recommended to have one .conf file per
 ; pool in the following directory:
 include=/etc/php5/fpm/pool.d/*.conf

diff --git a/php5-fpm b/php5-fpm
 #!/bin/sh
 ### BEGIN INIT INFO
 # Provides:          php-fpm php5-fpm
 # Required-Start:    $remote_fs $network
 # Required-Stop:     $remote_fs $network
 # Default-Start:     2 3 4 5
 # Default-Stop:      0 1 6	
 # Short-Description: starts php5-fpm
 # Description:       Starts PHP5 FastCGI Process Manager Daemon
 ### END INIT INFO

 # Author: Ondrej Sury <[email protected]>

 PATH=/sbin:/usr/sbin:/bin:/usr/bin
 DESC="PHP5 FastCGI Process Manager"
 NAME=php5-fpm
 DAEMON=/usr/sbin/$NAME
 DAEMON_ARGS="--fpm-config /etc/php5/fpm/php-fpm.conf"
 PIDFILE=/var/run/php5-fpm.pid
 TIMEOUT=30
 SCRIPTNAME=/etc/init.d/$NAME

 # FPM does not seem to handle the modules unloading very well
 # Here is a temporary fix while I'm investigating
 export ZEND_DONT_UNLOAD_MODULES=1

 # Exit if the package is not installed
 [ -x "$DAEMON" ] || exit 0

 # Read configuration variable file if it is present
 [ -r /etc/default/$NAME ] && . /etc/default/$NAME

 # Load the VERBOSE setting and other rcS variables
 . /lib/init/vars.sh

 # Define LSB log_* functions.
 # Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
 . /lib/lsb/init-functions

 #
 # Function to check the correctness of the config file
 #
 do_check()
 {
    [ "$1" != "no" ] && $DAEMON $DAEMON_ARGS -t 2>&1 | grep -v "\[ERROR\]"
    FPM_ERROR=$($DAEMON $DAEMON_ARGS -t 2>&1 | grep "\[ERROR\]")

    if [ -n "${FPM_ERROR}" ]; then
 	echo "Please fix your configuration file..."
 	$DAEMON $DAEMON_ARGS -t 2>&1 | grep "\[ERROR\]"
 	return 1
    fi
    return 0
 }

 #
 # Function that starts the daemon/service
 #
 do_start()
 {
 	# Return
 	#   0 if daemon has been started
 	#   1 if daemon was already running
 	#   2 if daemon could not be started
 	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
 		|| return 1
 	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
 		$DAEMON_ARGS 2>/dev/null \
 		|| return 2
 	# Add code here, if necessary, that waits for the process to be ready
 	# to handle requests from services started subsequently which depend
 	# on this one.  As a last resort, sleep for some time.
 }

 #
 # Function that stops the daemon/service
 #
 do_stop()
 {
 	# Return
 	#   0 if daemon has been stopped
 	#   1 if daemon was already stopped
 	#   2 if daemon could not be stopped
 	#   other if a failure occurred
 	start-stop-daemon --stop --quiet --retry=QUIT/$TIMEOUT/TERM/5/KILL/5 --pidfile $PIDFILE --name $NAME
 	RETVAL="$?"
 	[ "$RETVAL" = 2 ] && return 2
 	# Wait for children to finish too if this is a daemon that forks
 	# and if the daemon is only ever run from this initscript.
 	# If the above conditions are not satisfied then add some other code
 	# that waits for the process to drop all resources that could be
 	# needed by services started subsequently.  A last resort is to
 	# sleep for some time.
 	start-stop-daemon --stop --quiet --oknodo --retry=0/30/TERM/5/KILL/5 --exec $DAEMON
 	[ "$?" = 2 ] && return 2
 	# Many daemons don't delete their pidfiles when they exit.
 	rm -f $PIDFILE
 	return "$RETVAL"
 }

 #
 # Function that sends a SIGHUP to the daemon/service
 #
 do_reload() {
 	#
 	# If the daemon can reload its configuration without
 	# restarting (for example, when it is sent a SIGHUP),
 	# then implement that here.
 	#
 	start-stop-daemon --stop --signal USR2 --quiet --pidfile $PIDFILE --name $NAME
 	return 0
 }

 case "$1" in
    start)
 	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
 	do_check $VERBOSE
 	case "$?" in
 	    0)
 		do_start
 		case "$?" in
 		    0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
 		    2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 		esac
 		;;
 	    1) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 	esac
 	;;
    stop)
 	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
 	do_stop
 	case "$?" in
 		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
 		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 	esac
 	;;
    status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
    check)
        do_check yes
 	;;
    reload|force-reload)
 	log_daemon_msg "Reloading $DESC" "$NAME"
 	do_reload
 	log_end_msg $?
 	;;
    restart)
 	log_daemon_msg "Restarting $DESC" "$NAME"
 	do_stop
 	case "$?" in
 	  0|1)
 		do_start
 		case "$?" in
 			0) log_end_msg 0 ;;
 			1) log_end_msg 1 ;; # Old process is still running
 			*) log_end_msg 1 ;; # Failed to start
 		esac
 		;;
 	  *)
 	  	# Failed to stop
 		log_end_msg 1
 		;;
 	esac
 	;;
    *)
 	echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload|force-reload}" >&2
 	exit 1
    ;;
 esac

 :
diff --git a/REMDME.md b/REMDME.md
diff --git a/site_template b/site_template
 # Serve static files
 location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ {
  access_log        off;
  log_not_found     off;
  expires           30d;
 }

diff --git a/www.conf b/www.conf
 ; Start a new pool named 'www'.
 ; the variable $pool can we used in any directive and will be replaced by the
 ; pool name ('www' here)
 [www]

 ; Per pool prefix
 ; It only applies on the following directives:
 ; - 'slowlog'
 ; - 'listen' (unixsocket)
 ; - 'chroot'
 ; - 'chdir'
 ; - 'php_values'
 ; - 'php_admin_values'
 ; When not set, the global prefix (or /usr) applies instead.
 ; Note: This directive can also be relative to the global prefix.
 ; Default Value: none
 ;prefix = /path/to/pools/$pool

 ; Unix user/group of processes
 ; Note: The user is mandatory. If the group is not set, the default user's group
 ;       will be used.
 user = www-data
 group = www-data

 ; The address on which to accept FastCGI requests.
 ; Valid syntaxes are:
 ;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
 ;                            a specific port;
 ;   'port'                 - to listen on a TCP socket to all addresses on a
 ;                            specific port;
 ;   '/path/to/unix/socket' - to listen on a unix socket.
 ; Note: This value is mandatory.
 ;listen = 127.0.0.1:9000
 listen = /var/run/php5-fpm.sock

 ; Set listen(2) backlog. A value of '-1' means unlimited.
 ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
 ;listen.backlog = -1

 ; Set permissions for unix socket, if one is used. In Linux, read/write
 ; permissions must be set in order to allow connections from a web server. Many
 ; BSD-derived systems allow connections regardless of permissions. 
 ; Default Values: user and group are set as the running user
 ;                 mode is set to 0666
 listen.owner = www-data
 listen.group = www-data
 listen.mode = 0666
 
 ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
 ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
 ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
 ; must be separated by a comma. If this value is left blank, connections will be
 ; accepted from any ip address.
 ; Default Value: any
 ;listen.allowed_clients = 127.0.0.1

 ; Specify the nice(2) priority to apply to the pool processes (only if set)
 ; The value can vary from -19 (highest priority) to 20 (lower priority)
 ; Note: - It will only work if the FPM master process is launched as root
 ;       - The pool processes will inherit the master process priority
 ;         unless it specified otherwise
 ; Default Value: no set
 ; priority = -19

 ; Choose how the process manager will control the number of child processes.
 ; Possible Values:
 ;   static  - a fixed number (pm.max_children) of child processes;
 ;   dynamic - the number of child processes are set dynamically based on the
 ;             following directives. With this process management, there will be
 ;             always at least 1 children.
 ;             pm.max_children      - the maximum number of children that can
 ;                                    be alive at the same time.
 ;             pm.start_servers     - the number of children created on startup.
 ;             pm.min_spare_servers - the minimum number of children in 'idle'
 ;                                    state (waiting to process). If the number
 ;                                    of 'idle' processes is less than this
 ;                                    number then some children will be created.
 ;             pm.max_spare_servers - the maximum number of children in 'idle'
 ;                                    state (waiting to process). If the number
 ;                                    of 'idle' processes is greater than this
 ;                                    number then some children will be killed.
 ;  ondemand - no children are created at startup. Children will be forked when
 ;             new requests will connect. The following parameter are used:
 ;             pm.max_children           - the maximum number of children that
 ;                                         can be alive at the same time.
 ;             pm.process_idle_timeout   - The number of seconds after which
 ;                                         an idle process will be killed.
 ; Note: This value is mandatory.
 pm = dynamic

 ; The number of child processes to be created when pm is set to 'static' and the
 ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
 ; This value sets the limit on the number of simultaneous requests that will be
 ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
 ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
 ; CGI. The below defaults are based on a server without much resources. Don't
 ; forget to tweak pm.* to fit your needs.
 ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
 ; Note: This value is mandatory.
 pm.max_children = 5

 ; The number of child processes created on startup.
 ; Note: Used only when pm is set to 'dynamic'
 ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
 pm.start_servers = 2

 ; The desired minimum number of idle server processes.
 ; Note: Used only when pm is set to 'dynamic'
 ; Note: Mandatory when pm is set to 'dynamic'
 pm.min_spare_servers = 1

 ; The desired maximum number of idle server processes.
 ; Note: Used only when pm is set to 'dynamic'
 ; Note: Mandatory when pm is set to 'dynamic'
 pm.max_spare_servers = 3

 ; The number of seconds after which an idle process will be killed.
 ; Note: Used only when pm is set to 'ondemand'
 ; Default Value: 10s
 ;pm.process_idle_timeout = 10s;
 
 ; The number of requests each child process should execute before respawning.
 ; This can be useful to work around memory leaks in 3rd party libraries. For
 ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
 ; Default Value: 0
 ;pm.max_requests = 500

 ; The URI to view the FPM status page. If this value is not set, no URI will be
 ; recognized as a status page. It shows the following informations:
 ;   pool                 - the name of the pool;
 ;   process manager      - static, dynamic or ondemand;
 ;   start time           - the date and time FPM has started;
 ;   start since          - number of seconds since FPM has started;
 ;   accepted conn        - the number of request accepted by the pool;
 ;   listen queue         - the number of request in the queue of pending
 ;                          connections (see backlog in listen(2));
 ;   max listen queue     - the maximum number of requests in the queue
 ;                          of pending connections since FPM has started;
 ;   listen queue len     - the size of the socket queue of pending connections;
 ;   idle processes       - the number of idle processes;
 ;   active processes     - the number of active processes;
 ;   total processes      - the number of idle + active processes;
 ;   max active processes - the maximum number of active processes since FPM
 ;                          has started;
 ;   max children reached - number of times, the process limit has been reached,
 ;                          when pm tries to start more children (works only for
 ;                          pm 'dynamic' and 'ondemand');
 ; Value are updated in real time.
 ; Example output:
 ;   pool:                 www
 ;   process manager:      static
 ;   start time:           01/Jul/2011:17:53:49 +0200
 ;   start since:          62636
 ;   accepted conn:        190460
 ;   listen queue:         0
 ;   max listen queue:     1
 ;   listen queue len:     42
 ;   idle processes:       4
 ;   active processes:     11
 ;   total processes:      15
 ;   max active processes: 12
 ;   max children reached: 0
 ;
 ; By default the status page output is formatted as text/plain. Passing either
 ; 'html', 'xml' or 'json' in the query string will return the corresponding
 ; output syntax. Example:
 ;   http://www.foo.bar/status
 ;   http://www.foo.bar/status?json
 ;   http://www.foo.bar/status?html
 ;   http://www.foo.bar/status?xml
 ;
 ; By default the status page only outputs short status. Passing 'full' in the
 ; query string will also return status for each pool process.
 ; Example: 
 ;   http://www.foo.bar/status?full
 ;   http://www.foo.bar/status?json&full
 ;   http://www.foo.bar/status?html&full
 ;   http://www.foo.bar/status?xml&full
 ; The Full status returns for each process:
 ;   pid                  - the PID of the process;
 ;   state                - the state of the process (Idle, Running, ...);
 ;   start time           - the date and time the process has started;
 ;   start since          - the number of seconds since the process has started;
 ;   requests             - the number of requests the process has served;
 ;   request duration     - the duration in µs of the requests;
 ;   request method       - the request method (GET, POST, ...);
 ;   request URI          - the request URI with the query string;
 ;   content length       - the content length of the request (only with POST);
 ;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
 ;   script               - the main script called (or '-' if not set);
 ;   last request cpu     - the %cpu the last request consumed
 ;                          it's always 0 if the process is not in Idle state
 ;                          because CPU calculation is done when the request
 ;                          processing has terminated;
 ;   last request memory  - the max amount of memory the last request consumed
 ;                          it's always 0 if the process is not in Idle state
 ;                          because memory calculation is done when the request
 ;                          processing has terminated;
 ; If the process is in Idle state, then informations are related to the
 ; last request the process has served. Otherwise informations are related to
 ; the current request being served.
 ; Example output:
 ;   ************************
 ;   pid:                  31330
 ;   state:                Running
 ;   start time:           01/Jul/2011:17:53:49 +0200
 ;   start since:          63087
 ;   requests:             12808
 ;   request duration:     1250261
 ;   request method:       GET
 ;   request URI:          /test_mem.php?N=10000
 ;   content length:       0
 ;   user:                 -
 ;   script:               /home/fat/web/docs/php/test_mem.php
 ;   last request cpu:     0.00
 ;   last request memory:  0
 ;
 ; Note: There is a real-time FPM status monitoring sample web page available
 ;       It's available in: ${prefix}/share/fpm/status.html
 ;
 ; Note: The value must start with a leading slash (/). The value can be
 ;       anything, but it may not be a good idea to use the .php extension or it
 ;       may conflict with a real PHP file.
 ; Default Value: not set 
 ;pm.status_path = /status
 
 ; The ping URI to call the monitoring page of FPM. If this value is not set, no
 ; URI will be recognized as a ping page. This could be used to test from outside
 ; that FPM is alive and responding, or to
 ; - create a graph of FPM availability (rrd or such);
 ; - remove a server from a group if it is not responding (load balancing);
 ; - trigger alerts for the operating team (24/7).
 ; Note: The value must start with a leading slash (/). The value can be
 ;       anything, but it may not be a good idea to use the .php extension or it
 ;       may conflict with a real PHP file.
 ; Default Value: not set
 ;ping.path = /ping

 ; This directive may be used to customize the response of a ping request. The
 ; response is formatted as text/plain with a 200 response code.
 ; Default Value: pong
 ;ping.response = pong

 ; The access log file
 ; Default: not set
 ;access.log = log/$pool.access.log

 ; The access log format.
 ; The following syntax is allowed
 ;  %%: the '%' character
 ;  %C: %CPU used by the request
 ;      it can accept the following format:
 ;      - %{user}C for user CPU only
 ;      - %{system}C for system CPU only
 ;      - %{total}C  for user + system CPU (default)
 ;  %d: time taken to serve the request
 ;      it can accept the following format:
 ;      - %{seconds}d (default)
 ;      - %{miliseconds}d
 ;      - %{mili}d
 ;      - %{microseconds}d
 ;      - %{micro}d
 ;  %e: an environment variable (same as $_ENV or $_SERVER)
 ;      it must be associated with embraces to specify the name of the env
 ;      variable. Some exemples:
 ;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
 ;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
 ;  %f: script filename
 ;  %l: content-length of the request (for POST request only)
 ;  %m: request method
 ;  %M: peak of memory allocated by PHP
 ;      it can accept the following format:
 ;      - %{bytes}M (default)
 ;      - %{kilobytes}M
 ;      - %{kilo}M
 ;      - %{megabytes}M
 ;      - %{mega}M
 ;  %n: pool name
 ;  %o: ouput header
 ;      it must be associated with embraces to specify the name of the header:
 ;      - %{Content-Type}o
 ;      - %{X-Powered-By}o
 ;      - %{Transfert-Encoding}o
 ;      - ....
 ;  %p: PID of the child that serviced the request
 ;  %P: PID of the parent of the child that serviced the request
 ;  %q: the query string 
 ;  %Q: the '?' character if query string exists
 ;  %r: the request URI (without the query string, see %q and %Q)
 ;  %R: remote IP address
 ;  %s: status (response code)
 ;  %t: server time the request was received
 ;      it can accept a strftime(3) format:
 ;      %d/%b/%Y:%H:%M:%S %z (default)
 ;  %T: time the log has been written (the request has finished)
 ;      it can accept a strftime(3) format:
 ;      %d/%b/%Y:%H:%M:%S %z (default)
 ;  %u: remote user
 ;
 ; Default: "%R - %u %t \"%m %r\" %s"
 ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
 
 ; The log file for slow requests
 ; Default Value: not set
 ; Note: slowlog is mandatory if request_slowlog_timeout is set
 ;slowlog = log/$pool.log.slow
 
 ; The timeout for serving a single request after which a PHP backtrace will be
 ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
 ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
 ; Default Value: 0
 ;request_slowlog_timeout = 0
 
 ; The timeout for serving a single request after which the worker process will
 ; be killed. This option should be used when the 'max_execution_time' ini option
 ; does not stop script execution for some reason. A value of '0' means 'off'.
 ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
 ; Default Value: 0
 ;request_terminate_timeout = 0
 
 ; Set open file descriptor rlimit.
 ; Default Value: system defined value
 ;rlimit_files = 1024
 
 ; Set max core size rlimit.
 ; Possible Values: 'unlimited' or an integer greater or equal to 0
 ; Default Value: system defined value
 ;rlimit_core = 0
 
 ; Chroot to this directory at the start. This value must be defined as an
 ; absolute path. When this value is not set, chroot is not used.
 ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
 ; of its subdirectories. If the pool prefix is not set, the global prefix
 ; will be used instead.
 ; Note: chrooting is a great security feature and should be used whenever 
 ;       possible. However, all PHP paths will be relative to the chroot
 ;       (error_log, sessions.save_path, ...).
 ; Default Value: not set
 ;chroot = 
 
 ; Chdir to this directory at the start.
 ; Note: relative path can be used.
 ; Default Value: current directory or / when chroot
 chdir = /
 
 ; Redirect worker stdout and stderr into main error log. If not set, stdout and
 ; stderr will be redirected to /dev/null according to FastCGI specs.
 ; Note: on highloaded environement, this can cause some delay in the page
 ; process time (several ms).
 ; Default Value: no
 ;catch_workers_output = yes

 ; Limits the extensions of the main script FPM will allow to parse. This can
 ; prevent configuration mistakes on the web server side. You should only limit
 ; FPM to .php extensions to prevent malicious users to use other extensions to
 ; exectute php code.
 ; Note: set an empty value to allow all extensions.
 ; Default Value: .php
 ;security.limit_extensions = .php .php3 .php4 .php5
 
 ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
 ; the current environment.
 ; Default Value: clean env
 ;env[HOSTNAME] = $HOSTNAME
 ;env[PATH] = /usr/local/bin:/usr/bin:/bin
 ;env[TMP] = /tmp
 ;env[TMPDIR] = /tmp
 ;env[TEMP] = /tmp

 ; Additional php.ini defines, specific to this pool of workers. These settings
 ; overwrite the values previously defined in the php.ini. The directives are the
 ; same as the PHP SAPI:
 ;   php_value/php_flag             - you can set classic ini defines which can
 ;                                    be overwritten from PHP call 'ini_set'. 
 ;   php_admin_value/php_admin_flag - these directives won't be overwritten by
 ;                                     PHP call 'ini_set'
 ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

 ; Defining 'extension' will load the corresponding shared extension from
 ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
 ; overwrite previously defined php.ini values, but will append the new value
 ; instead.

 ; Note: path INI options can be relative and will be expanded with the prefix
 ; (pool, global or /usr)

 ; Default Value: nothing is defined by default except the values in php.ini and
 ;                specified at startup with the -d argument
 ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
 ;php_flag[display_errors] = off
 ;php_admin_value[error_log] = /var/log/fpm-php.www.log
 ;php_admin_flag[log_errors] = on
 ;php_admin_value[memory_limit] = 32M
	fastcgi_param QUERY_STRING $query_string;
	fastcgi_param REQUEST_METHOD $request_method;
	fastcgi_param CONTENT_TYPE $content_type;
	fastcgi_param CONTENT_LENGTH $content_length;

	fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
	fastcgi_param PATH_INFO $fastcgi_script_name;

	fastcgi_param SCRIPT_NAME $fastcgi_script_name;
	fastcgi_param REQUEST_URI $request_uri;
	fastcgi_param DOCUMENT_URI $document_uri;
	fastcgi_param DOCUMENT_ROOT $document_root;
	fastcgi_param SERVER_PROTOCOL $server_protocol;
	fastcgi_param HTTPS $https if_not_empty;

	fastcgi_param GATEWAY_INTERFACE CGI/1.1;
	fastcgi_param SERVER_SOFTWARE nginx/$nginx_version;

	fastcgi_param REMOTE_ADDR $remote_addr;
	fastcgi_param REMOTE_PORT $remote_port;
	fastcgi_param SERVER_ADDR $server_addr;
	fastcgi_param SERVER_PORT $server_port;
	fastcgi_param SERVER_NAME $server_name;

	# PHP only, required if PHP was built with --enable-force-cgi-redirect
	fastcgi_param REDIRECT_STATUS 200;
	server {
	include /usr/local/nginx/conf/site_template;

	server_name p.windix.org php.windix.org;
	access_log logs/p.windix.org-access.log combined;
	error_log logs/p.windix.org-error.log crit;

	root /var/www/p.windix.org;
	index index.html index.php;
	autoindex on;

	# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
	#
	location ~ \.php$ {
	try_files $uri /index.php;
	fastcgi_index index.php;
	include /usr/local/nginx/conf/fastcgi_params;

	if (-f $request_filename) {
	# fastcgi_pass 127.0.0.1:9000;
	fastcgi_pass unix:/var/run/php5-fpm.sock;
	}
	}
	}
	;;;;;;;;;;;;;;;;;;;;;
	; FPM Configuration ;
	;;;;;;;;;;;;;;;;;;;;;

	; All relative paths in this configuration file are relative to PHP's install
	; prefix (/usr). This prefix can be dynamicaly changed by using the
	; '-p' argument from the command line.

	; Include one or more files. If glob(3) exists, it is used to include a bunch of
	; files from a glob(3) pattern. This directive can be used everywhere in the
	; file.
	; Relative path can also be used. They will be prefixed by:
	; - the global prefix if it's been set (-p arguement)
	; - /usr otherwise
	;include=/etc/php5/fpm/*.conf

	;;;;;;;;;;;;;;;;;;
	; Global Options ;
	;;;;;;;;;;;;;;;;;;

	[global]
	; Pid file
	; Note: the default prefix is /var
	; Default Value: none
	pid = /var/run/php5-fpm.pid

	; Error log file
	; If it's set to "syslog", log is sent to syslogd instead of being written
	; in a local file.
	; Note: the default prefix is /var
	; Default Value: log/php-fpm.log
	error_log = /var/log/php5-fpm.log

	; syslog_facility is used to specify what type of program is logging the
	; message. This lets syslogd specify that messages from different facilities
	; will be handled differently.
	; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
	; Default Value: daemon
	;syslog.facility = daemon

	; syslog_ident is prepended to every message. If you have multiple FPM
	; instances running on the same server, you can change the default value
	; which must suit common needs.
	; Default Value: php-fpm
	;syslog.ident = php-fpm

	; Log level
	; Possible Values: alert, error, warning, notice, debug
	; Default Value: notice
	;log_level = notice

	; If this number of child processes exit with SIGSEGV or SIGBUS within the time
	; interval set by emergency_restart_interval then FPM will restart. A value
	; of '0' means 'Off'.
	; Default Value: 0
	;emergency_restart_threshold = 0

	; Interval of time used by emergency_restart_interval to determine when
	; a graceful restart will be initiated. This can be useful to work around
	; accidental corruptions in an accelerator's shared memory.
	; Available Units: s(econds), m(inutes), h(ours), or d(ays)
	; Default Unit: seconds
	; Default Value: 0
	;emergency_restart_interval = 0

	; Time limit for child processes to wait for a reaction on signals from master.
	; Available units: s(econds), m(inutes), h(ours), or d(ays)
	; Default Unit: seconds
	; Default Value: 0
	;process_control_timeout = 0

	; The maximum number of processes FPM will fork. This has been design to control
	; the global number of processes when using dynamic PM within a lot of pools.
	; Use it with caution.
	; Note: A value of 0 indicates no limit
	; Default Value: 0
	; process.max = 128

	; Specify the nice(2) priority to apply to the master process (only if set)
	; The value can vary from -19 (highest priority) to 20 (lower priority)
	; Note: - It will only work if the FPM master process is launched as root
	; - The pool process will inherit the master process priority
	; unless it specified otherwise
	; Default Value: no set
	; process.priority = -19

	; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
	; Default Value: yes
	;daemonize = yes

	; Set open file descriptor rlimit for the master process.
	; Default Value: system defined value
	;rlimit_files = 1024

	; Set max core size rlimit for the master process.
	; Possible Values: 'unlimited' or an integer greater or equal to 0
	; Default Value: system defined value
	;rlimit_core = 0

	; Specify the event mechanism FPM will use. The following is available:
	; - select (any POSIX os)
	; - poll (any POSIX os)
	; - epoll (linux >= 2.5.44)
	; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
	; - /dev/poll (Solaris >= 7)
	; - port (Solaris >= 10)
	; Default Value: not set (auto detection)
	; events.mechanism = epoll

	;;;;;;;;;;;;;;;;;;;;
	; Pool Definitions ;
	;;;;;;;;;;;;;;;;;;;;

	; Multiple pools of child processes may be started with different listening
	; ports and different management options. The name of the pool will be
	; used in logs and stats. There is no limitation on the number of pools which
	; FPM can handle. Your system will tell you anyway :)

	; To configure the pools it is recommended to have one .conf file per
	; pool in the following directory:
	include=/etc/php5/fpm/pool.d/*.conf
	#!/bin/sh
	### BEGIN INIT INFO
	# Provides: php-fpm php5-fpm
	# Required-Start: $remote_fs $network
	# Required-Stop: $remote_fs $network
	# Default-Start: 2 3 4 5
	# Default-Stop: 0 1 6
	# Short-Description: starts php5-fpm
	# Description: Starts PHP5 FastCGI Process Manager Daemon
	### END INIT INFO

	# Author: Ondrej Sury <[email protected]>

	PATH=/sbin:/usr/sbin:/bin:/usr/bin
	DESC="PHP5 FastCGI Process Manager"
	NAME=php5-fpm
	DAEMON=/usr/sbin/$NAME
	DAEMON_ARGS="--fpm-config /etc/php5/fpm/php-fpm.conf"
	PIDFILE=/var/run/php5-fpm.pid
	TIMEOUT=30
	SCRIPTNAME=/etc/init.d/$NAME

	# FPM does not seem to handle the modules unloading very well
	# Here is a temporary fix while I'm investigating
	export ZEND_DONT_UNLOAD_MODULES=1

	# Exit if the package is not installed
	[ -x "$DAEMON" ] \|\| exit 0

	# Read configuration variable file if it is present
	[ -r /etc/default/$NAME ] && . /etc/default/$NAME

	# Load the VERBOSE setting and other rcS variables
	. /lib/init/vars.sh

	# Define LSB log_* functions.
	# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
	. /lib/lsb/init-functions

	#
	# Function to check the correctness of the config file
	#
	do_check()
	{
	[ "$1" != "no" ] && $DAEMON $DAEMON_ARGS -t 2>&1 \| grep -v "\[ERROR\]"
	FPM_ERROR=$($DAEMON $DAEMON_ARGS -t 2>&1 \| grep "\[ERROR\]")

	if [ -n "${FPM_ERROR}" ]; then
	echo "Please fix your configuration file..."
	$DAEMON $DAEMON_ARGS -t 2>&1 \| grep "\[ERROR\]"
	return 1
	fi
	return 0
	}

	#
	# Function that starts the daemon/service
	#
	do_start()
	{
	# Return
	# 0 if daemon has been started
	# 1 if daemon was already running
	# 2 if daemon could not be started
	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
	\|\| return 1
	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
	$DAEMON_ARGS 2>/dev/null \
	\|\| return 2
	# Add code here, if necessary, that waits for the process to be ready
	# to handle requests from services started subsequently which depend
	# on this one. As a last resort, sleep for some time.
	}

	#
	# Function that stops the daemon/service
	#
	do_stop()
	{
	# Return
	# 0 if daemon has been stopped
	# 1 if daemon was already stopped
	# 2 if daemon could not be stopped
	# other if a failure occurred
	start-stop-daemon --stop --quiet --retry=QUIT/$TIMEOUT/TERM/5/KILL/5 --pidfile $PIDFILE --name $NAME
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently. A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/TERM/5/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
	}

	#
	# Function that sends a SIGHUP to the daemon/service
	#
	do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal USR2 --quiet --pidfile $PIDFILE --name $NAME
	return 0
	}

	case "$1" in
	start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
	do_check $VERBOSE
	case "$?" in
	0)
	do_start
	case "$?" in
	0\|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
	2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
	1) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
	stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	case "$?" in
	0\|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
	2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
	status)
	status_of_proc "$DAEMON" "$NAME" && exit 0 \|\| exit $?
	;;
	check)
	do_check yes
	;;
	reload\|force-reload)
	log_daemon_msg "Reloading $DESC" "$NAME"
	do_reload
	log_end_msg $?
	;;
	restart)
	log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	0\|1)
	do_start
	case "$?" in
	0) log_end_msg 0 ;;
	1) log_end_msg 1 ;; # Old process is still running
	*) log_end_msg 1 ;; # Failed to start
	esac
	;;
	*)
	# Failed to stop
	log_end_msg 1
	;;
	esac
	;;
	*)
	echo "Usage: $SCRIPTNAME {start\|stop\|status\|restart\|reload\|force-reload}" >&2
	exit 1
	;;
	esac

	:
	# Serve static files
	location ~* \.(jpg\|jpeg\|gif\|png\|css\|js\|ico\|xml)$ {
	access_log off;
	log_not_found off;
	expires 30d;
	}
	; Start a new pool named 'www'.
	; the variable $pool can we used in any directive and will be replaced by the
	; pool name ('www' here)
	[www]

	; Per pool prefix
	; It only applies on the following directives:
	; - 'slowlog'
	; - 'listen' (unixsocket)
	; - 'chroot'
	; - 'chdir'
	; - 'php_values'
	; - 'php_admin_values'
	; When not set, the global prefix (or /usr) applies instead.
	; Note: This directive can also be relative to the global prefix.
	; Default Value: none
	;prefix = /path/to/pools/$pool

	; Unix user/group of processes
	; Note: The user is mandatory. If the group is not set, the default user's group
	; will be used.
	user = www-data
	group = www-data

	; The address on which to accept FastCGI requests.
	; Valid syntaxes are:
	; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
	; a specific port;
	; 'port' - to listen on a TCP socket to all addresses on a
	; specific port;
	; '/path/to/unix/socket' - to listen on a unix socket.
	; Note: This value is mandatory.
	;listen = 127.0.0.1:9000
	listen = /var/run/php5-fpm.sock

	; Set listen(2) backlog. A value of '-1' means unlimited.
	; Default Value: 128 (-1 on FreeBSD and OpenBSD)
	;listen.backlog = -1

	; Set permissions for unix socket, if one is used. In Linux, read/write
	; permissions must be set in order to allow connections from a web server. Many
	; BSD-derived systems allow connections regardless of permissions.
	; Default Values: user and group are set as the running user
	; mode is set to 0666
	listen.owner = www-data
	listen.group = www-data
	listen.mode = 0666

	; List of ipv4 addresses of FastCGI clients which are allowed to connect.
	; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
	; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
	; must be separated by a comma. If this value is left blank, connections will be
	; accepted from any ip address.
	; Default Value: any
	;listen.allowed_clients = 127.0.0.1

	; Specify the nice(2) priority to apply to the pool processes (only if set)
	; The value can vary from -19 (highest priority) to 20 (lower priority)
	; Note: - It will only work if the FPM master process is launched as root
	; - The pool processes will inherit the master process priority
	; unless it specified otherwise
	; Default Value: no set
	; priority = -19

	; Choose how the process manager will control the number of child processes.
	; Possible Values:
	; static - a fixed number (pm.max_children) of child processes;
	; dynamic - the number of child processes are set dynamically based on the
	; following directives. With this process management, there will be
	; always at least 1 children.
	; pm.max_children - the maximum number of children that can
	; be alive at the same time.
	; pm.start_servers - the number of children created on startup.
	; pm.min_spare_servers - the minimum number of children in 'idle'
	; state (waiting to process). If the number
	; of 'idle' processes is less than this
	; number then some children will be created.
	; pm.max_spare_servers - the maximum number of children in 'idle'
	; state (waiting to process). If the number
	; of 'idle' processes is greater than this
	; number then some children will be killed.
	; ondemand - no children are created at startup. Children will be forked when
	; new requests will connect. The following parameter are used:
	; pm.max_children - the maximum number of children that
	; can be alive at the same time.
	; pm.process_idle_timeout - The number of seconds after which
	; an idle process will be killed.
	; Note: This value is mandatory.
	pm = dynamic

	; The number of child processes to be created when pm is set to 'static' and the
	; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
	; This value sets the limit on the number of simultaneous requests that will be
	; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
	; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
	; CGI. The below defaults are based on a server without much resources. Don't
	; forget to tweak pm.* to fit your needs.
	; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
	; Note: This value is mandatory.
	pm.max_children = 5

	; The number of child processes created on startup.
	; Note: Used only when pm is set to 'dynamic'
	; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
	pm.start_servers = 2

	; The desired minimum number of idle server processes.
	; Note: Used only when pm is set to 'dynamic'
	; Note: Mandatory when pm is set to 'dynamic'
	pm.min_spare_servers = 1

	; The desired maximum number of idle server processes.
	; Note: Used only when pm is set to 'dynamic'
	; Note: Mandatory when pm is set to 'dynamic'
	pm.max_spare_servers = 3

	; The number of seconds after which an idle process will be killed.
	; Note: Used only when pm is set to 'ondemand'
	; Default Value: 10s
	;pm.process_idle_timeout = 10s;

	; The number of requests each child process should execute before respawning.
	; This can be useful to work around memory leaks in 3rd party libraries. For
	; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
	; Default Value: 0
	;pm.max_requests = 500

	; The URI to view the FPM status page. If this value is not set, no URI will be
	; recognized as a status page. It shows the following informations:
	; pool - the name of the pool;
	; process manager - static, dynamic or ondemand;
	; start time - the date and time FPM has started;
	; start since - number of seconds since FPM has started;
	; accepted conn - the number of request accepted by the pool;
	; listen queue - the number of request in the queue of pending
	; connections (see backlog in listen(2));
	; max listen queue - the maximum number of requests in the queue
	; of pending connections since FPM has started;
	; listen queue len - the size of the socket queue of pending connections;
	; idle processes - the number of idle processes;
	; active processes - the number of active processes;
	; total processes - the number of idle + active processes;
	; max active processes - the maximum number of active processes since FPM
	; has started;
	; max children reached - number of times, the process limit has been reached,
	; when pm tries to start more children (works only for
	; pm 'dynamic' and 'ondemand');
	; Value are updated in real time.
	; Example output:
	; pool: www
	; process manager: static
	; start time: 01/Jul/2011:17:53:49 +0200
	; start since: 62636
	; accepted conn: 190460
	; listen queue: 0
	; max listen queue: 1
	; listen queue len: 42
	; idle processes: 4
	; active processes: 11
	; total processes: 15
	; max active processes: 12
	; max children reached: 0
	;
	; By default the status page output is formatted as text/plain. Passing either
	; 'html', 'xml' or 'json' in the query string will return the corresponding
	; output syntax. Example:
	; http://www.foo.bar/status
	; http://www.foo.bar/status?json
	; http://www.foo.bar/status?html
	; http://www.foo.bar/status?xml
	;
	; By default the status page only outputs short status. Passing 'full' in the
	; query string will also return status for each pool process.
	; Example:
	; http://www.foo.bar/status?full
	; http://www.foo.bar/status?json&full
	; http://www.foo.bar/status?html&full
	; http://www.foo.bar/status?xml&full
	; The Full status returns for each process:
	; pid - the PID of the process;
	; state - the state of the process (Idle, Running, ...);
	; start time - the date and time the process has started;
	; start since - the number of seconds since the process has started;
	; requests - the number of requests the process has served;
	; request duration - the duration in µs of the requests;
	; request method - the request method (GET, POST, ...);
	; request URI - the request URI with the query string;
	; content length - the content length of the request (only with POST);
	; user - the user (PHP_AUTH_USER) (or '-' if not set);
	; script - the main script called (or '-' if not set);
	; last request cpu - the %cpu the last request consumed
	; it's always 0 if the process is not in Idle state
	; because CPU calculation is done when the request
	; processing has terminated;
	; last request memory - the max amount of memory the last request consumed
	; it's always 0 if the process is not in Idle state
	; because memory calculation is done when the request
	; processing has terminated;
	; If the process is in Idle state, then informations are related to the
	; last request the process has served. Otherwise informations are related to
	; the current request being served.
	; Example output:
	; ************************
	; pid: 31330
	; state: Running
	; start time: 01/Jul/2011:17:53:49 +0200
	; start since: 63087
	; requests: 12808
	; request duration: 1250261
	; request method: GET
	; request URI: /test_mem.php?N=10000
	; content length: 0
	; user: -
	; script: /home/fat/web/docs/php/test_mem.php
	; last request cpu: 0.00
	; last request memory: 0
	;
	; Note: There is a real-time FPM status monitoring sample web page available
	; It's available in: ${prefix}/share/fpm/status.html
	;
	; Note: The value must start with a leading slash (/). The value can be
	; anything, but it may not be a good idea to use the .php extension or it
	; may conflict with a real PHP file.
	; Default Value: not set
	;pm.status_path = /status

	; The ping URI to call the monitoring page of FPM. If this value is not set, no
	; URI will be recognized as a ping page. This could be used to test from outside
	; that FPM is alive and responding, or to
	; - create a graph of FPM availability (rrd or such);
	; - remove a server from a group if it is not responding (load balancing);
	; - trigger alerts for the operating team (24/7).
	; Note: The value must start with a leading slash (/). The value can be
	; anything, but it may not be a good idea to use the .php extension or it
	; may conflict with a real PHP file.
	; Default Value: not set
	;ping.path = /ping

	; This directive may be used to customize the response of a ping request. The
	; response is formatted as text/plain with a 200 response code.
	; Default Value: pong
	;ping.response = pong

	; The access log file
	; Default: not set
	;access.log = log/$pool.access.log

	; The access log format.
	; The following syntax is allowed
	; %%: the '%' character
	; %C: %CPU used by the request
	; it can accept the following format:
	; - %{user}C for user CPU only
	; - %{system}C for system CPU only
	; - %{total}C for user + system CPU (default)
	; %d: time taken to serve the request
	; it can accept the following format:
	; - %{seconds}d (default)
	; - %{miliseconds}d
	; - %{mili}d
	; - %{microseconds}d
	; - %{micro}d
	; %e: an environment variable (same as $_ENV or $_SERVER)
	; it must be associated with embraces to specify the name of the env
	; variable. Some exemples:
	; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
	; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
	; %f: script filename
	; %l: content-length of the request (for POST request only)
	; %m: request method
	; %M: peak of memory allocated by PHP
	; it can accept the following format:
	; - %{bytes}M (default)
	; - %{kilobytes}M
	; - %{kilo}M
	; - %{megabytes}M
	; - %{mega}M
	; %n: pool name
	; %o: ouput header
	; it must be associated with embraces to specify the name of the header:
	; - %{Content-Type}o
	; - %{X-Powered-By}o
	; - %{Transfert-Encoding}o
	; - ....
	; %p: PID of the child that serviced the request
	; %P: PID of the parent of the child that serviced the request
	; %q: the query string
	; %Q: the '?' character if query string exists
	; %r: the request URI (without the query string, see %q and %Q)
	; %R: remote IP address
	; %s: status (response code)
	; %t: server time the request was received
	; it can accept a strftime(3) format:
	; %d/%b/%Y:%H:%M:%S %z (default)
	; %T: time the log has been written (the request has finished)
	; it can accept a strftime(3) format:
	; %d/%b/%Y:%H:%M:%S %z (default)
	; %u: remote user
	;
	; Default: "%R - %u %t \"%m %r\" %s"
	;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"

	; The log file for slow requests
	; Default Value: not set
	; Note: slowlog is mandatory if request_slowlog_timeout is set
	;slowlog = log/$pool.log.slow

	; The timeout for serving a single request after which a PHP backtrace will be
	; dumped to the 'slowlog' file. A value of '0s' means 'off'.
	; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
	; Default Value: 0
	;request_slowlog_timeout = 0

	; The timeout for serving a single request after which the worker process will
	; be killed. This option should be used when the 'max_execution_time' ini option
	; does not stop script execution for some reason. A value of '0' means 'off'.
	; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
	; Default Value: 0
	;request_terminate_timeout = 0

	; Set open file descriptor rlimit.
	; Default Value: system defined value
	;rlimit_files = 1024

	; Set max core size rlimit.
	; Possible Values: 'unlimited' or an integer greater or equal to 0
	; Default Value: system defined value
	;rlimit_core = 0

	; Chroot to this directory at the start. This value must be defined as an
	; absolute path. When this value is not set, chroot is not used.
	; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
	; of its subdirectories. If the pool prefix is not set, the global prefix
	; will be used instead.
	; Note: chrooting is a great security feature and should be used whenever
	; possible. However, all PHP paths will be relative to the chroot
	; (error_log, sessions.save_path, ...).
	; Default Value: not set
	;chroot =

	; Chdir to this directory at the start.
	; Note: relative path can be used.
	; Default Value: current directory or / when chroot
	chdir = /

	; Redirect worker stdout and stderr into main error log. If not set, stdout and
	; stderr will be redirected to /dev/null according to FastCGI specs.
	; Note: on highloaded environement, this can cause some delay in the page
	; process time (several ms).
	; Default Value: no
	;catch_workers_output = yes

	; Limits the extensions of the main script FPM will allow to parse. This can
	; prevent configuration mistakes on the web server side. You should only limit
	; FPM to .php extensions to prevent malicious users to use other extensions to
	; exectute php code.
	; Note: set an empty value to allow all extensions.
	; Default Value: .php
	;security.limit_extensions = .php .php3 .php4 .php5

	; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
	; the current environment.
	; Default Value: clean env
	;env[HOSTNAME] = $HOSTNAME
	;env[PATH] = /usr/local/bin:/usr/bin:/bin
	;env[TMP] = /tmp
	;env[TMPDIR] = /tmp
	;env[TEMP] = /tmp

	; Additional php.ini defines, specific to this pool of workers. These settings
	; overwrite the values previously defined in the php.ini. The directives are the
	; same as the PHP SAPI:
	; php_value/php_flag - you can set classic ini defines which can
	; be overwritten from PHP call 'ini_set'.
	; php_admin_value/php_admin_flag - these directives won't be overwritten by
	; PHP call 'ini_set'
	; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

	; Defining 'extension' will load the corresponding shared extension from
	; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
	; overwrite previously defined php.ini values, but will append the new value
	; instead.

	; Note: path INI options can be relative and will be expanded with the prefix
	; (pool, global or /usr)

	; Default Value: nothing is defined by default except the values in php.ini and
	; specified at startup with the -d argument
	;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
	;php_flag[display_errors] = off
	;php_admin_value[error_log] = /var/log/fpm-php.www.log
	;php_admin_flag[log_errors] = on
	;php_admin_value[memory_limit] = 32M