Last active
December 16, 2015 10:58
-
-
Save wolstena/5423695 to your computer and use it in GitHub Desktop.
keepalived debuginf info
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| vrrp_script varnish_check { | |
| script "/etc/keepalived/poller health" | |
| interval 2 | |
| } | |
| vrrp_script promote_check { | |
| script "/etc/keepalived/poller promote" | |
| interval 2 | |
| weight 20 | |
| } | |
| vrrp_script demote_check { | |
| script "/etc/keepalived/poller demote" | |
| interval 2 | |
| weight -20 | |
| } | |
| vrrp_instance VI_1 { | |
| interface eth0 | |
| state MASTER | |
| virtual_router_id 88 | |
| priority 150 # 101 on master, 100 on backup | |
| garp_master_delay 10 | |
| advert_int 2 | |
| authentication { | |
| auth_type PASS | |
| auth_pass 56ZPy04e | |
| } | |
| virtual_ipaddress { | |
| 172.16.10.88 | |
| } | |
| track_script { | |
| varnish_check | |
| promote_check | |
| demote_check | |
| } | |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| dladm show-linkprop -z c0253ee6-ea74-4646-bada-90485fda4a90 net0 | |
| dladm reset-linkprop -z c0253ee6-ea74-4646-bada-90485fda4a90 -p allowed-ips net0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| root@keepalive02:~# ip addr list | |
| 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN | |
| link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
| inet 127.0.0.1/8 scope host lo | |
| inet6 ::1/128 scope host | |
| valid_lft forever preferred_lft forever | |
| 2: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN | |
| link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff | |
| 3: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN | |
| link/ether 92:f6:e8:33:4f:5e brd ff:ff:ff:ff:ff:ff | |
| 4: eql: <MASTER> mtu 576 qdisc noop state DOWN qlen 5 | |
| link/slip | |
| 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 | |
| link/ether c2:9d:69:a1:ea:4a brd ff:ff:ff:ff:ff:ff | |
| inet 172.16.10.87/24 brd 172.16.10.255 scope global eth0 | |
| inet 172.16.10.88/32 scope global eth0 | |
| inet6 fe80::c09d:69ff:fea1:ea4a/64 scope link tentative dadfailed | |
| valid_lft forever preferred_lft forever | |
| 6: tunl0: <NOARP> mtu 1480 qdisc noop state DOWN | |
| link/ipip 0.0.0.0 brd 0.0.0.0 | |
| 7: sit0: <NOARP> mtu 1480 qdisc noop state DOWN | |
| link/sit 0.0.0.0 brd 0.0.0.0 | |
| 8: ip6tnl0: <NOARP> mtu 1452 qdisc noop state DOWN |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Netlink reflector reports IP 172.16.10.87 added | |
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Netlink reflector reports IP fe80::c09d:69ff:fea1:ea4a added | |
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Registering Kernel netlink reflector | |
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Registering Kernel netlink command channel | |
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Opening file '/etc/keepalived/keepalived.conf'. | |
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Configuration is using : 6378 Bytes | |
| Apr 19 22:31:32 keepalive02 Keepalived_healthcheckers[2136]: Using LinkWatch kernel netlink reflector... | |
| Apr 19 22:31:37 keepalive02 Keepalived_vrrp[2137]: Opening file '/etc/keepalived/keepalived.conf'. | |
| Apr 19 22:31:37 keepalive02 Keepalived_vrrp[2137]: Configuration is using : 65976 Bytes | |
| Apr 19 22:31:37 keepalive02 Keepalived_vrrp[2137]: Using LinkWatch kernel netlink reflector... | |
| Apr 19 22:31:37 keepalive02 Keepalived_vrrp[2137]: VRRP sockpool: [ifindex(5), proto(112), fd(11,12)] | |
| Apr 19 22:31:39 keepalive02 Keepalived_vrrp[2137]: VRRP_Instance(VI_1) Transition to MASTER STATE | |
| Apr 19 22:31:41 keepalive02 Keepalived_vrrp[2137]: VRRP_Instance(VI_1) Entering MASTER STATE | |
| Apr 19 22:31:41 keepalive02 Keepalived_vrrp[2137]: VRRP_Instance(VI_1) setting protocol VIPs. | |
| Apr 19 22:31:41 keepalive02 Keepalived_healthcheckers[2136]: Netlink reflector reports IP 172.16.10.88 added | |
| Apr 19 22:31:41 keepalive02 Keepalived_vrrp[2137]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 172.16.10.88 | |
| Apr 19 22:31:51 keepalive02 Keepalived_vrrp[2137]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 172.16.10.88 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 22:35:49.876146 IP (tos 0xc0, ttl 255, id 728, offset 0, flags [none], proto VRRP (112), length 40) | |
| 172.16.10.86 > 224.0.0.18: vrrp 172.16.10.86 > 224.0.0.18: VRRPv2, Advertisement, vrid 88, prio 100, authtype simple, intvl 2s, length 20, addrs: 172.16.10.88 auth "56ZPy04e" | |
| 22:35:51.876843 IP (tos 0xc0, ttl 255, id 729, offset 0, flags [none], proto VRRP (112), length 40) | |
| 172.16.10.86 > 224.0.0.18: vrrp 172.16.10.86 > 224.0.0.18: VRRPv2, Advertisement, vrid 88, prio 100, authtype simple, intvl 2s, length 20, addrs: 172.16.10.88 auth "56ZPy04e" | |
| 22:35:51.877247 IP (tos 0xc0, ttl 255, id 729, offset 0, flags [none], proto VRRP (112), length 40) | |
| 172.16.10.86 > 224.0.0.18: vrrp 172.16.10.86 > 224.0.0.18: VRRPv2, Advertisement, vrid 88, prio 100, authtype simple, intvl 2s, length 20, addrs: 172.16.10.88 auth "56ZPy04e" |
Do i need to implement igmp on the switch?
enabled ip spoofing in zone. this allowed the ip spoofing to work. but still now multicast. both hosts think they own the ip.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Host1
keepalive02.r3live.cbcr3.com -> vrrp.mcast.net IP D=224.0.0.18 S=172.16.10.87 LEN=40, ID=715, TOS=0xc0, TTL=255
? -> (multicast) ETHER Type=010B (LLC/802.3), size=64 bytes
? -> (multicast) Bridge PDU T:2 L:36
Host 2
keepalive01.r3live.cbcr3.com -> vrrp.mcast.net IP D=224.0.0.18 S=172.16.10.86 LEN=40, ID=744, TOS=0xc0, TTL=255
? -> (multicast) Bridge PDU T:2 L:36
? -> (multicast) ETHER Type=010B (LLC/802.3), size=64 bytes