WSL2 Port forwarding port to linux

wsl2-network.ps1

$remoteport = bash.exe -c "ifconfig eth0 | grep 'inet '"
$found = $remoteport -match '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}';

if( $found ){
  $remoteport = $matches[0];
} else{
  echo "The Script Exited, the ip address of WSL 2 cannot be found";
  exit;
}

#[Ports]

#All the ports you want to forward separated by coma
$ports=@(80,443,10000,3000,5000);


#[Static ip]
#You can change the addr to your ip config to listen to a specific address
$addr='0.0.0.0';
$ports_a = $ports -join ",";


#Remove Firewall Exception Rules
iex "Remove-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock' ";

#adding Exception Rules for inbound and outbound Rules
iex "New-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock' -Direction Outbound -LocalPort $ports_a -Action Allow -Protocol TCP";
iex "New-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock' -Direction Inbound -LocalPort $ports_a -Action Allow -Protocol TCP";

for( $i = 0; $i -lt $ports.length; $i++ ){
  $port = $ports[$i];
  iex "netsh interface portproxy delete v4tov4 listenport=$port listenaddress=$addr";
  iex "netsh interface portproxy add v4tov4 listenport=$port listenaddress=$addr connectport=$port connectaddress=$remoteport";
}

Well, the script actually doesn't work: after executing the above script (exactly as it was posted) I don't see any additional rules at Windows firewall and port forwarding doesn't work. Also I've tried to completely turn off Windows firewall - still no effect.
Any help please?

Note the above only works with IPv4. I needed my host to be exposed on it's ipv6 address so I have to run the following
netsh interface portproxy add v6tov4 listenport=4433 listenaddress=2001:0db8:85a3:0000:0000:8a2e:0370:7334 connectaddress=172.31.110.132 connectport=4433

I saw this script everywhere, but cant solve my problem unfortunately..

I have the same issue that @jmpp
https://stackoverflow.com/questions/61002681/connecting-to-wsl2-server-via-local-network#comment113484398_63781351

but my phone is Android
I just cant connect from my device, only the WSL2 host, as localhost or the WSL2 eth0 address

help please!

@luizwhite you're not alone :)))

you can obtain ip with:

wsl hostname -I

$remoteport to $wsl2_ip maybe better naming?

you can obtain ip with:

wsl hostname -I

Am I doing something wrong if I get 172.24.128.1 from wsl hostname -I from Windows, and 172.24.137.181 from ifconfig in WSL2 (Ubuntu)?

you can obtain ip with:

wsl hostname -I

Am I doing something wrong if I get 172.24.128.1 from wsl hostname -I from Windows, and 172.24.137.181 from ifconfig in WSL2 (Ubuntu)?

Well, in my case, wsl hostname -I and ip addr can get the same ip address.

Thanks @jayagami!

As it turned out, I had two WSL installs: Legacy and Ubuntu; i was using Ubuntu but Legacy was set to default with I ran wsl --list. I used wsl --set-default "Ubuntu" and that let wsl hostname -I tell me the correct IP!

wojtow helped me in this comment thread: https://superuser.com/questions/1586386/how-to-find-wsl2-machines-ip-address-from-windows/1603307?noredirect=1#comment2502448_1603307

Thanks to both of you though!

Thanks @jayagami!

As it turned out, I had two WSL installs: Legacy and Ubuntu; i was using Ubuntu but Legacy was set to default with I ran wsl --list. I used wsl --set-default "Ubuntu" and that let wsl hostname -I tell me the correct IP!

wojtow helped me in this comment thread: https://superuser.com/questions/1586386/how-to-find-wsl2-machines-ip-address-from-windows/1603307?noredirect=1#comment2502448_1603307

Thanks to both of you though!

You're welcome, glad you have it solved.

The script did not work for me for as is because I have WSL installed for a non-admin user and not for the admin, so I had to run the wsl bash commands as the user with WSL and then pass the values to a process to run as admin and do the firewall bits... This one works if you are in my situation (the sleep is there just so you can see the rule output before the subprocess shell despawns):

$remoteport = wsl hostname -I
$found = $remoteport -match '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}';

if( $found ){
  $remoteport = $matches[0];
} else{
  echo "The Script Exited, the ip address of WSL 2 cannot be found";
  exit;
}

#[Ports]

#All the ports you want to forward separated by coma
$ports=@(3000,5000,8080);

#[Static ip]
#You can change the addr to your ip config to listen to a specific address
$addr='0.0.0.0';
$ports_a = $ports -join ",";
Write-Host $ports_a
Write-Host $remoteport
Write-Host $addr

#[Script]
$script = {
  function run([string]$ports_a,[string]$remoteport,[string]$addr){
    #Remove Firewall Exception Rules
    iex \"Remove-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock'\";
    Write-Host $ports_a
    Write-Host $remoteport
    Write-Host $addr
    #adding Exception Rules for inbound and outbound Rules
    iex \"New-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock'  -Direction Outbound -LocalPort $ports_a -Action Allow -Protocol TCP\";
    iex \"New-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock'  -Direction Inbound -LocalPort $ports_a -Action Allow -Protocol TCP\";

    for( $i = 0; $i -lt $ports.length; $i++ ){
      $port = $ports[$i];
      iex \"netsh interface portproxy delete v4tov4 listenport=$port listenaddress=$addr\";
      iex \"netsh interface portproxy add v4tov4 listenport=$port listenaddress=$addr connectport=$port connectaddress=$remoteport\";
    }
    Start-Sleep -s 25
  }
}
Start-Process -FilePath powershell.exe -ArgumentList "-Command & {$script run '$ports_a' '$remoteport' '$addr'}" -verb RunAs

Thanks, it works for me after run script run "wsl hostname -I " and use the ip in the address for axios

Amazing tips from all guys

where should we run this script?

Here's a version with better error handling, and with working firewall commands (you have to use $ports directly instead of $ports_a):

try {
	$remoteport = bash.exe -c "ip addr show eth0 | grep 'inet '"
	$found = $remoteport -match '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}';

	if( $found ){
	  $remoteport = $matches[0];
	} else{
	  throw "The Script Exited, the ip address of WSL 2 cannot be found";
	}

	#[Ports]

	#All the ports you want to forward separated by a comma (no spaces)
	$ports=@(22,2049);


	#[Static ip]
	#You can change the addr to your ip config to listen to a specific address
	$addr='0.0.0.0';
	$ports_a = $ports -join ",";

	#Remove Firewall Exception Rules
	Remove-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock' -ErrorAction SilentlyContinue;

	#adding Exception Rules for inbound and outbound Rules
	New-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock' -Direction Outbound -LocalPort $ports -Action Allow -Protocol TCP -ErrorAction stop;

	New-NetFireWallRule -DisplayName 'WSL 2 Firewall Unlock' -Direction Inbound -LocalPort $ports -Action Allow -Protocol TCP -ErrorAction stop;


	for( $i = 0; $i -lt $ports.length; $i++ ){
	  $port = $ports[$i];
	  netsh interface portproxy delete v4tov4 listenport=$port listenaddress=$addr;
	  netsh interface portproxy add v4tov4 listenport=$port listenaddress=$addr connectport=$port connectaddress=$remoteport;
	}

	echo "For WSL IP $remoteport added Firewall rules and port forwards for ports: $ports_a";
} catch {
    Write-Error $_.Exception.ToString();
    Read-Host -Prompt "The above error occurred. Press Enter to exit.";
}

Add the .ps1 script to task scheduler with elevated rights on PC launch, or create a shortcut to the .ps1 file with elevated rights with this in the object field of the shortcut's properties:

"C:\Program Files\PowerShell\7\pwsh.exe" -f C:\YOUR_OWN_PATH_TO\script.ps1

Change the paths to powershell's executable and to your script accordingly.

Also, as far as I am aware here's the original source of the script. A user named edwindijas has to be the original author of the script.

Also, as far as I am aware here's the original source of the script. A user named edwindijas has to be the original author of the script.

yeah, i had mentioned it in the comments

https://gist.github.com/xmeng1/aae4b223e9ccc089911ee764928f5486?permalink_comment_id=3342144#gistcomment-3342144

@Esensats great work.

This is probably user error, but after executing this script I am no longer able to use my browser on Windows to reach a server running on 127.0.0.1 in WSL. I also cannot reach it through the IP associated with WSL in ipconfig.

Basically I am now further from the original goal as I was. Not only can I not reach the server from another device, I also cannot reach it from the windows machine running WSL itself.

This has also persisted after removing the Firewall rules. At this point I don't even know how to fix this problem. Turning off the firewall entirely has also not fixed this, so there must be a different issue at play than the firewall...

Remote Development in VSCode also has stopped working, likely due to the same issue. Somehow this script (or more likely, Windows itself) has completely broken WSL.

Even after completely reinstall WSL I now cannot reach it in anyway from the host machine, except by opening it in a terminal. I would advise anyone to reconsider using this script. I don't know what exactly about it has caused this, but it has completely bricked my system.

@edwindijas Since then I made a CLI tool called pfwsl inspired by your script. With it you can type pfwsl add 8080 (or multiple: pfwsl add 80,443,22) and it'll add all of the netsh and firewall rules automatically. It's also as easy to disable the forwarding with pfwsl rm or pfwsl rm 443,80.

It has some extra features like finding all firewall rules on specified ports (pfwsl find 8080), listing currently enabled rules (pfwsl ls) etc!