Last active
March 16, 2025 02:36
-
-
Save yanorei32/83384f7637fc7383b72da999aba6ec4f to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux version 2.6.33-rc4 (delta@delta-desktop) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 Thu Aug 30 21:50:43 JST 2012 | |
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 | |
CPU: VIVT data cache, VIVT instruction cache | |
Machine: NECAT Delta | |
Memory policy: ECC disabled, Data cache writeback | |
On node 0 totalpages: 16384 | |
free_area_init_node: node 0, pgdat c0640484, node_mem_map c065f000 | |
DMA zone: 128 pages used for memmap | |
DMA zone: 0 pages reserved | |
DMA zone: 16256 pages, LIFO batch:3 | |
DaVinci necatdelta/omap-l138 variant 0x1 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 | |
Kernel command line: mem=64M ip=off rdinit=/sbin/init | |
PID hash table entries: 256 (order: -2, 1024 bytes) | |
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | |
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | |
Memory: 64MB = 64MB total | |
Memory: 58384KB available (3304K code, 269K data, 2912K init, 0K highmem) | |
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
Hierarchical RCU implementation. | |
NR_IRQS:245 | |
Console: colour dummy device 80x30 | |
Calibrating delay loop... 187.18 BogoMIPS (lpj=935936) | |
Mount-cache hash table entries: 512 | |
CPU: Testing write buffer coherency: ok | |
DaVinci: 144 gpio irqs | |
regulator: core version 0.5 | |
NET: Registered protocol family 16 | |
No entry for the specified index | |
necatdelta_boad_init: suspend registration failed: -19 | |
bio: create slab <bio-0> at 0 | |
Switching to clocksource timer0_1 | |
NET: Registered protocol family 2 | |
IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
TCP established hash table entries: 2048 (order: 2, 16384 bytes) | |
TCP bind hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP: Hash tables configured (established 2048 bind 2048) | |
TCP reno registered | |
UDP hash table entries: 256 (order: 0, 4096 bytes) | |
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
necatdelta_boad_init: cpgmac/rmii mux setup failed: -1073609068 | |
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
msgmni has been set to 114 | |
alg: No test for stdrng (krng) | |
io scheduler noop registered (default) | |
NECATDELTA-PWOFF: Misc device driver for NECATDELTA-PWOFF | |
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled | |
serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A | |
serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A | |
serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A | |
brd: module loaded | |
physmap platform flash device: 02000000 at 60000000 | |
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank | |
Amd/Fujitsu Extended Query Table at 0x0040 | |
physmap-flash.0: CFI does not contain boot bank location. Assuming top. | |
number of CFI chips: 1 | |
physmap platform flash device: 02000000 at 62000000 | |
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank | |
Amd/Fujitsu Extended Query Table at 0x0040 | |
physmap-flash.0: CFI does not contain boot bank location. Assuming top. | |
number of CFI chips: 1 | |
Concatenating MTD devices: | |
(0): "physmap-flash.0" | |
(1): "physmap-flash.0" | |
into device "physmap-flash.0" | |
cmdlinepart partition parsing not available | |
RedBoot partition parsing not available | |
Using physmap partition information | |
Creating 14 MTD partitions on "physmap-flash.0": | |
0x000000000000-0x000000040000 : "uboottext" | |
0x000000040000-0x000000060000 : "ubootdata" | |
0x000000060000-0x000000080000 : "ubootenv" | |
0x000000080000-0x0000000a0000 : "firminfo" | |
Read MAC addr from EEPROM: 88:30:8a:04:03:13 | |
0x0000000a0000-0x0000000c0000 : "mlinuxhdr" | |
0x0000000c0000-0x0000006a0000 : "mlinux" | |
0x0000006a0000-0x0000006c0000 : "maplhdr" | |
0x0000006c0000-0x000001800000 : "mapl" | |
0x000001800000-0x000002000000 : "mdata" | |
0x000002000000-0x000002020000 : "linuxhdr" | |
0x000002020000-0x000002600000 : "linux" | |
0x000002600000-0x000002620000 : "aplhdr" | |
0x000002620000-0x000003800000 : "apl" | |
0x000003800000-0x000004000000 : "data" | |
console [netcon0] enabled | |
netconsole: network logging started | |
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0 | |
omap_rtc: RTC power up reset detected | |
omap_rtc: already running | |
rtc-rs5c372 1-0032: r2025sd found, 24hr, driver version 0.6 | |
rtc-rs5c372 1-0032: rtc core: registered rtc-rs5c372 as rtc1 | |
i2c /dev entries driver | |
watchdog watchdog: heartbeat 60 sec | |
cpuidle: using governor ladder | |
cpuidle: using governor menu | |
davinci_mmc davinci_mmc.1: Using DMA, 4-bit mode | |
TCP cubic registered | |
NET: Registered protocol family 17 | |
lib80211: common routines for IEEE802.11 drivers | |
lib80211_crypt: registered algorithm 'NULL' | |
lib80211_crypt: registered algorithm 'WEP' | |
lib80211_crypt: registered algorithm 'CCMP' | |
lib80211_crypt: registered algorithm 'TKIP' | |
Clocks: disable unused emac | |
Clocks: disable unused spi1 | |
PINMUX00 = 0x88448888 | |
PINMUX01 = 0x80088800 | |
PINMUX02 = 0x11114888 | |
PINMUX03 = 0x88008882 | |
PINMUX04 = 0x22222288 | |
PINMUX05 = 0x81118112 | |
PINMUX06 = 0x88888888 | |
PINMUX07 = 0x88118111 | |
PINMUX08 = 0x11111111 | |
PINMUX09 = 0x11111111 | |
PINMUX10 = 0x11111118 | |
PINMUX11 = 0x11111111 | |
PINMUX12 = 0x11111111 | |
PINMUX13 = 0x88888811 | |
PINMUX14 = 0x00000088 | |
PINMUX15 = 0x00000000 | |
PINMUX16 = 0x88888880 | |
PINMUX17 = 0x00000088 | |
PINMUX18 = 0x88822200 | |
PINMUX19 = 0x18822200 | |
Freeing init memory: 2912K | |
Warning: unable to open an initial console. | |
mmc0: new SDIO card at address 0001 | |
UBI: attaching mtd13 to ubi0 | |
UBI: physical eraseblock size: 131072 bytes (128 KiB) | |
UBI: logical eraseblock size: 130944 bytes | |
UBI: smallest flash I/O unit: 1 | |
UBI: VID header offset: 64 (aligned 64) | |
UBI: data offset: 128 | |
UBI: attached mtd13 to ubi0 | |
UBI: MTD device name: "data" | |
UBI: MTD device size: 8 MiB | |
UBI: number of good PEBs: 64 | |
UBI: number of bad PEBs: 0 | |
UBI: max. allowed volumes: 128 | |
UBI: wear-leveling threshold: 4096 | |
UBI: number of internal volumes: 1 | |
UBI: number of user volumes: 1 | |
UBI: available PEBs: 0 | |
UBI: total number of reserved PEBs: 64 | |
UBI: number of PEBs reserved for bad PEB handling: 0 | |
UBI: max/mean erase counter: 59/33 | |
UBI: image sequence number: 0 | |
UBI: background thread "ubi_bgt0d" started, PID 38 | |
UBIFS: recovery needed | |
UBIFS: recovery completed | |
UBIFS: mounted UBI device 0, volume 0, name "operation" | |
UBIFS: file system size: 6678144 bytes (6521 KiB, 6 MiB, 51 LEBs) | |
UBIFS: journal size: 1047553 bytes (1023 KiB, 0 MiB, 6 LEBs) | |
UBIFS: media format: w4/r0 (latest is w4/r0) | |
UBIFS: default compressor: lzo | |
UBIFS: reserved for root: 315425 bytes (308 KiB) | |
mlan: module license 'Marvell Proprietary' taints kernel. | |
Disabling lock debugging due to kernel taint | |
wlan_sdio mmc0:0001:1: firmware: requesting mrvl/sd8787_uapsta.bin | |
WLAN FW is active | |
ti_omapl_pru_suart ti_omapl_pru_suart.1: firmware: requesting PRU_SUART_Emulation.bin | |
ti_omapl_pru_suart ti_omapl_pru_suart.1: fw size 3700. downloading... | |
ti_omapl_pru_suart.1: ttySU0 at MMIO 0x1d00000 (irq = 3) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU1 at MMIO 0x1d00000 (irq = 4) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU2 at MMIO 0x1d00000 (irq = 5) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU3 at MMIO 0x1d00000 (irq = 6) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU4 at MMIO 0x1d00000 (irq = 7) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU5 at MMIO 0x1d00000 (irq = 8) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU6 at MMIO 0x1d00000 (irq = 9) is a suart_tty | |
ti_omapl_pru_suart.1: ttySU7 at MMIO 0x1d00000 (irq = 10) is a suart_tty | |
ti_omapl_pru_suart ti_omapl_pru_suart.1: ti_omapl_pru_suart device registered(pru_clk=93750000, asp_clk=150000000) |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot 2009.11 ( 8月 23 2012 - 16:46:29) | |
I2C: ready | |
DRAM: 64 MB | |
Flash: 64 MB | |
*** Warning - bad CRC, using default environment | |
In: serial | |
Out: serial | |
Err: serial | |
ARM Clock : 375000000 Hz | |
DDR Clock : 150000000 Hz | |
Hit any key to stop autoboot: 0 | |
## Executing script at 60040000 | |
CRC32 for 62000004 ... 6201ffff ==> f7beebd0 | |
CRC32 for 62600004 ... 6261ffff ==> e6efd85a | |
Total of 1 word were the same | |
Total of 1 word were the same | |
CRC32 for 62020000 ... 622ddbc3 ==> 0efa8334 | |
CRC32 for 62620000 ... 63308fff ==> 066f31a9 | |
Total of 1 word were the same | |
Total of 1 word were the same | |
## Booting kernel from Legacy Image at c0700000 ... | |
Image Name: Linux-2.6.33-rc4 | |
Image Type: ARM Linux Kernel Image (uncompressed) | |
Data Size: 2874244 Bytes = 2.7 MB | |
Load Address: c0008000 | |
Entry Point: c0008000 | |
Verifying Checksum ... OK | |
Loading Kernel Image ... OK | |
OK | |
Starting kernel ... | |
Uncompressing Linux... done, booting the kernel. | |
Starting load_product... | |
_____ _____ _ _ | |
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | _| .'| . | . | | __| _| . | | | -_| _| _| | |
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
|___| |___| | |
Arago Project http://arago-project.org arago ttyS2 | |
Arago 2010.03 arago ttyS2 | |
arago login: |
Author
yanorei32
commented
Mar 16, 2025
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment