Created
May 26, 2021 00:42
-
-
Save yarshure/70c45d3b187df1b991c3af228646b10e to your computer and use it in GitHub Desktop.
iboot
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
iPhone:~ root# nvram bootdelay=10 | |
iPhone:~ root# nvram -p | |
auto-boot true | |
bootdelay 10 | |
backlight-level 1507 | |
restore-step-monitor {0x11010207:"wifexited"} | |
restore-step-warnings {0x11060100:{0:"NVRAM access is not currently available"}} | |
debug-uarts 3 | |
boot-args serial=3 | |
boot-command fsboot | |
com.apple.System.tz0-size 0xC00000 | |
iPhone:~ root# reboot | |
Kext loading now disabled. | |
Kext unloading now disabled. | |
Kext autounloading now disabled. | |
Process launchd.developm [1] disabling system-wide I/O Throttling | |
Process launchd.developm [1] disabling system-wide CPU Throttling | |
Thu Jan 8 20:13:00 1970 iPhone com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system) <Notice>: System shutdown initiated by: reboot.139<-sh.132<-login.51<-launchd.develop.1 | |
AppleH6CamInUserClient::clientDied | |
AppleH6CamInUserClient::free - Freeing UserClient for process: mediaserverd (pid 32) | |
prevent idle sleep list: AppleBasebandPCIQMAP- (1) | |
AppleHDQGasGauge::gaugeInterrupts:1209 cannot disable GG interrupt (e00002d6) | |
Thu Jan 8 20:13:03 1970 iPhone com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system) <Notice>: Userspace teardown took: 3028 ms | |
syncing disks... Killing all processes | |
continuing | |
hfs: unmount initiated on Logs on device disk0s1s4 | |
hfs: unmount initiated on Baseband Data on device disk0s1s3 | |
hfs: unmount initiated on Data on device disk0s1s2 | |
hfs: unmount initiated on WhitetailSajo14A83432m.H8iPhoneFactoryOS on device b(1, 2) | |
done | |
MACH Reboot | |
virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService *, void *) - kMessageInterfaceWasDeActivated | |
AppleUSBDeviceMux::reportStats: USB mux statistics: | |
USB mux: 369 reads / 0 errors, 458 writes / 0 errors | |
USB mux: 0 short packets, 0 dups, 0 missing, 0 resent | |
AppleARMPMUCharger: usb stack power 0mA | |
000599.537520 wlan0.A[29] handleAudioNotification@149:get Message 0xe3ff8103 | |
AppleARMPMUCharger: usb stack power 0mA | |
AirPort: Disabled AppleBCMWLANCore (link 0, sys 1, user 1) | |
prevent idle sleep list: AppleEmbeddedNVMeController- (1) | |
AppleMultitouchN1SPI: powering off | |
wdog restart | |
i2c0 fai?resetIdResponse | |
Lo5 PWR | |
ID Resp: 75 20 0E 00 00 00 00 | |
@74 00000000 | |
pmu: setup reg=7000 val=1d write failed | |
gg charger: 0x68=0x8 0x74=0xa2 0x75=0x0 0x76=0x84 0x77=0x0 | |
power supply type usb host | |
DCS Init Lib Built for: iBoot SOC | |
DCS Init [iBoot Build] for ChipID==0x8003 chipRev A1 (#DCS==4, #Rank==1) [SoC] using Coldboot | |
Memory_size: 2147483648 bytes | |
rAMCC_DRAMACCCTRL: 0x0000000f | |
nvme: initializing controller 0 | |
BOOT nvme: max_transfer_blocks 256 | |
BOOT nvme: num_namespaces 6 | |
nvme: nsid=7 not present | |
image 0x800044340: bdev 0x800038e80 type illb offset 0x0 len 0x39960 | |
image 0x8000443c0: bdev 0x800038e80 type ibot offset 0x39960 len 0x59960 | |
image 0x800044440: bdev 0x800038e80 type bat1 offset 0x932c0 len 0x1faa | |
image 0x8000444c0: bdev 0x800038e80 type dtre offset 0x9526a len 0x20594 | |
image 0x800044540: bdev 0x800038e80 type glyP offset 0xb57fe len 0x2bcf | |
image 0x8000445c0: bdev 0x800038e80 type chg0 offset 0xb83cd len 0x3da9 | |
image 0x800044640: bdev 0x800038e80 type bat0 offset 0xbc176 len 0xc210 | |
image 0x8000446c0: bdev 0x800038e80 type batF offset 0xc8386 len 0x16012 | |
image 0x800044740: bdev 0x800038e80 type chg1 offset 0xde398 len 0xa06b | |
image 0x8000447c0: bdev 0x800038e80 type logo offset 0xe8403 len 0x2e5c | |
image 0x800044840: bdev 0x800038e80 type recm offset 0xeb25f len 0x40791 | |
jumping into image at 0x87ec00000 | |
battery voltage 4290 mV | |
power supply type batt | |
nvme: initializing controller 0 | |
nvme: S3E B0 Sandisk 1z TLC 1D 2 plane 128GB NAND | |
nvme: Model Number: APPLE SSD AP0128K | |
nvme: Serial Number: 00451C6DF5C301FE0 | |
nvme: Firmware Rev: 36.66.01 | |
nvme: chip hw/rev: 0x00/0x10 | |
nvme: nand device: 5113 | |
nvme: FTL ver: 23.1 | |
nvme: MSP/DM vers: 1/101 | |
nvme: ASP_BUILD_TRAIN: 7.0.86~1 | |
nvme: MSP_BUILD_TRAIN: 45.8.86~1 | |
nvme: SQES 102 CQES 68 | |
nvme: max_transfer_blocks 256 | |
syscfg: version 0x00020002 with 52 entries using 1064 of 131072 bytes | |
image 0x8701c8640: bdev 0x8701d40c0 type illb offset 0x0 len 0x39960 | |
image 0x8701c86c0: bdev 0x8701d40c0 type ibot offset 0x39960 len 0x59960 | |
image 0x8701c8740: bdev 0x8701d40c0 type bat1 offset 0x932c0 len 0x1faa | |
image 0x8701c87c0: bdev 0x8701d40c0 type dtre offset 0x9526a len 0x20594 | |
image 0x8701c8840: bdev 0x8701d40c0 type glyP offset 0xb57fe len 0x2bcf | |
image 0x8701c88c0: bdev 0x8701d40c0 type chg0 offset 0xb83cd len 0x3da9 | |
image 0x8701c8940: bdev 0x8701d40c0 type bat0 offset 0xbc176 len 0xc210 | |
image 0x8701c89c0: bdev 0x8701d40c0 type batF offset 0xc8386 len 0x16012 | |
image 0x8701c8a40: bdev 0x8701d40c0 type chg1 offset 0xde398 len 0xa06b | |
image 0x8701c8ac0: bdev 0x8701d40c0 type logo offset 0xe8403 len 0x2e5c | |
image 0x8701c8b40: bdev 0x8701d40c0 type recm offset 0xeb25f len 0x40791 | |
Display PMU found, 0x0000f375, TI-a0 | |
pinot_init() | |
mipi_dsim_init() | |
pll_config 0x300 | |
pinot_init(): pinot_panel_id: 0xa1d11bd1 | |
pinot_init(): pinot_default_color: 0x00000000 | |
pinot_init(): pinot_backlight_cal: 0x00000041 | |
int_install_gamma_table: Found syscfg gamma table with version 1.0 | |
======================================= | |
:: | |
:: iBootStage2 for n71m, Copyright 2007-2016, Apple Inc. | |
:: | |
:: Local boot, Board 0x4 (n71map)/Rev 0x6 | |
:: | |
:: BUILD_TAG: iBoot-3406.1.77 | |
:: | |
:: BUILD_STYLE: DEVELOPMENT | |
:: | |
:: USB_SERIAL_NUMBER: CPID:8003 CPRV:01 CPFM:03 SCEP:01 BDID:04 ECID:000E7056282B60A6 IBFL:1D SRNM:[FFMW341JGRYG] | |
:: | |
======================================= | |
Boot Failure Count: 0 Panic Fail Count: 0 | |
Delaying boot for 10 seconds. Hit enter to break into the command prompt... | |
aborting autoboot due to user intervention. | |
Entering recovery mode, starting command prompt | |
] | |
] | |
] | |
] | |
] help | |
command list: | |
bootx boot a kernel cache at specified address | |
memboot boot a combo devicetree/ramdisk/kernelcache at specified address | |
fsboot boot kernelcache from filesystem | |
go jump directly to address | |
golocal jump directly to address | |
diags boot into diagnostics (if present) | |
alamo boot into alamo diags | |
dump_console dump console history | |
reboot reboot the device | |
poweroff power off the device | |
bgcolor set the display background color | |
setpicture set the image on the display | |
crc POSIX 1003.2 checksum of specified memory address range. | |
devicetree create a device tree from the specified address | |
fs file system commands | |
clearenv clear all environment variables | |
printenv print one or all environment variables | |
getenv get environment variable over usb | |
saveenv save current environment to flash | |
setenv set an environment variable | |
ramdisk create a ramdisk from the specified address | |
sha1 SHA-1 hash of specified memory address range. | |
syscfg flash SysCfg inspection | |
usb run a USB command | |
] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
] diags
Unable to load image type 64696167 from flashcheck_superblock:43: not APFS: 0x00000000
jumping into image at 0x810000000
pinot_quiesce()
mipi_dsim_quiesce()
Console router buffer allocated @ 0x87D2D0018, size = 262144 bytes
time-train: 12885 uS
Link 0 speed negotiate to 2
Link 0 width negotiate to 2
APCIE power on completed
Device 00:00:0 config space@0x610000000
Vendor:106B Device:1003 Revision:01 ClassCode:060400 Type:01
PriBus:00 SecBus:01 SubBus:01
Capability 0x01 Offset:0x40 Address:0x610000040
Capability 0x05 Offset:0x50 Address:0x610000050
Capability 0x10 Offset:0x70 Address:0x610000070
Extended Capability 0x0001 Ver:0x02 Offset:0x0100 Address:0x610000100
Extended Capability 0x001E Ver:0x01 Offset:0x0150 Address:0x610000150
Found device id 0x2002
Device 01:00:0 config space@0x610100000
Vendor:106B Device:2002 Revision:11 ClassCode:018002 Type:00
BAR0 MEM C0000000/00004000
BAR1 IO 00000000/00000004
Capability 0x01 Offset:0x40 Address:0x610100040
Capability 0x05 Offset:0x50 Address:0x610100050
Capability 0x10 Offset:0x70 Address:0x610100070
Extended Capability 0x0001 Ver:0x02 Offset:0x0100 Address:0x610100100
Extended Capability 0x0002 Ver:0x01 Offset:0x0148 Address:0x610100148
Extended Capability 0x0019 Ver:0x01 Offset:0x0168 Address:0x610100168
Extended Capability 0x0018 Ver:0x01 Offset:0x0178 Address:0x610100178
Extended Capability 0x001E Ver:0x01 Offset:0x0180 Address:0x610100180
APCIE Enumerate on completed
WARNING: HFS+: B-tree header map record offset should be 248 but is 0; using 248 instead
ERROR: [ABSM] Checksum corrupt. Found 0x13, expected 0x5B
0000000: 13 0D 45 02 88 A4 04 00 0B A6 2A E6 40 59 8C 29 ..E.......*.@y.)
0000010: 25 1C 64 B8 61 42 C4 18 B0 18 1A 19 08 0C 51 00 %.d.aB........Q.
[ABSM] Clearing corrupted shutdown scratch space
APS225 not found. Expected 0xB1, found 0x90
WHO_AM_I doesn't match AP6DS2AA's Chip ID: Expected 0x61 got 0x0
Datas: 4
Datas: 4
Datas: 5
N71m Diag (factory_n71_pvt)
BuildEng build N71mCasaval21C315af (21C315af). Revision 067b43a.
Built at 2017/10/16 19:21:49
script: device -k ThermalSensor -e sochot 0 on 120
script: device -k ThermalSensor -e sochot 1 on 125
script: cbcolor
Setting Screen Color based on iPX Control Bits:
script: alias vbat=pmuadc --read vbat --sel tigris
script --cont startup.txt
script: alias bbon="meta 'baseband --on --load_firmware; baseband --wait_for_ready --ping'"
script: alias bbonbypass="meta 'baseband --on --load_firmware; baseband --wait_for_ready --ping --bypass en'"
script: alias bboff=baseband --off
script: alias getcd=bblib -e BB_GetCD()
script: alias erase_rfcal=smokey Tools/RFCalErase --run
script: alias erase_efs=smokey Tools/EFSErase --run
script: alias erase_pac=smokey Tools/RFPacErase --run
script: alias hdq_en=i2c --devwrite 1 0x75 0x1D 1
script: alias hdq_dis=i2c --devwrite 1 0x75 0x1D 0
script: alias bblib="smokeyshell -p -e 'if BBLib_cfg then print [[no init]] else require [[BBLib.13A]];BB_Init() end'"
script: alias wcs=smokey --run WCS --clean LogBehavior=ConsoleOnly
script: alias bblibcfg=bblib -e printLibCfg()
script: alias bbdebug="meta 'base --debug on;ramlog --on 10;consolerouter --add -s *.{warn,error,print},system.debug.debug -d ramlog --quiet;consoleformat --en --sink serial -o ts'"
script: alias updateroot="meta 'usbfs --mount;cp -r usbfs:\AppleInternal nandfs:;usbfs --unmount;smokeyshell -r'"
[000E7056:282B60A6] :-)