Skip to content

Instantly share code, notes, and snippets.

@yarshure
Created March 3, 2023 10:55
Show Gist options
  • Save yarshure/b8a236734d8a39361f9e8344fffd58fa to your computer and use it in GitHub Desktop.
Save yarshure/b8a236734d8a39361f9e8344fffd58fa to your computer and use it in GitHub Desktop.
FreeBSD dpaa2 boot
---<<BOOT>>---
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n261074-fe5c211ba873: Thu Feb 23 07:29:46 UTC 2023
[email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
module scmi already present!
module firmware already present!
real memory = 33745506304 (32182 MB)
avail memory = 32871079936 (31348 MB)
Starting CPU 1 (1)
Starting CPU 2 (100)
Starting CPU 3 (101)
Starting CPU 4 (200)
Starting CPU 5 (201)
Starting CPU 6 (300)
Starting CPU 7 (301)
Starting CPU 8 (400)
Starting CPU 9 (401)
Starting CPU 10 (500)
Starting CPU 11 (501)
Starting CPU 12 (600)
Starting CPU 13 (601)
Starting CPU 14 (700)
Starting CPU 15 (701)
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
random: unblocking device.
ACPI: IORT: Dropping unhandled type 6
random: entropy device external interface
MAP ee3f0000 mode 2 pages 48
MAP ee900000 mode 2 pages 128
MAP ef360000 mode 2 pages 192
MAP ef420000 mode 2 pages 160
MAP ef4c0000 mode 2 pages 80
MAP ef510000 mode 2 pages 80
MAP ef560000 mode 2 pages 80
MAP ef5b0000 mode 2 pages 80
MAP ef600000 mode 2 pages 80
MAP ef650000 mode 2 pages 80
MAP ef6a0000 mode 2 pages 80
MAP ef6f0000 mode 2 pages 80
MAP ef740000 mode 2 pages 80
MAP ef790000 mode 2 pages 80
MAP ef7e0000 mode 2 pages 80
MAP ef830000 mode 2 pages 80
MAP ef880000 mode 2 pages 80
MAP fac80000 mode 2 pages 80
MAP 2040000 mode 0 pages 16
MAP 20c0000 mode 0 pages 16
MAP 20000000 mode 0 pages 16384
kbd0 at kbdmux0
acpi0: <NXP LX2160>
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x6000000-0x601ffff,0x6200000-0x63fffff on acpi0
its0: <ARM GIC Interrupt Translation Service> mem 0x6020000-0x603ffff on gic0
generic_timer0: <ARM Generic Timer> irq 27,28,29 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 25000050 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 25000050 Hz quality 1000
memac_mdio_acpi0: <Freescale XGMAC MDIO Bus> iomem 0x8b96000-0x8b96fff irq 7 on acpi0
memacphy_acpi0: <MEMAC PHY (acpi)> on memac_mdio_acpi0
memac_mdio_acpi1: <Freescale XGMAC MDIO Bus> iomem 0x8b97000-0x8b97fff irq 8 on acpi0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> on acpi0
uart0: <PrimeCell UART (PL011)> iomem 0x21c0000-0x21cffff irq 0 on acpi0
uart0: console (115200,n,8,1)
uart1: <PrimeCell UART (PL011)> iomem 0x21d0000-0x21dffff irq 1 on acpi0
dpaa2_mc0: <DPAA2 Management Complex> iomem 0x80c000000-0x80c00003f,0x8340000-0x837ffff on acpi0
dpaa2_mac_dev4: <DPAA2 MAC DEV> on dpaa2_mc0
dpaa2_mac_dev5: <DPAA2 MAC DEV> on dpaa2_mc0
dpaa2_mac_dev6: <DPAA2 MAC DEV> on dpaa2_mc0
dpaa2_mac_dev7: <DPAA2 MAC DEV> on dpaa2_mc0
dpaa2_mac_dev8: <DPAA2 MAC DEV> on dpaa2_mc0
dpaa2_rc0: <DPAA2 Resource Container> on dpaa2_mc0
dpaa2_rc0: MC firmware version: 10.28.1
dpaa2_mcp0: <DPAA2 MC portal> iomem 0x80c230000-0x80c23ffff at dpmcp (id=35) on dpaa2_rc0
dpaa2_mcp1: <DPAA2 MC portal> iomem 0x80c220000-0x80c22ffff at dpmcp (id=34) on dpaa2_rc0
dpaa2_mcp2: <DPAA2 MC portal> iomem 0x80c210000-0x80c21ffff at dpmcp (id=33) on dpaa2_rc0
dpaa2_mcp3: <DPAA2 MC portal> iomem 0x80c200000-0x80c20ffff at dpmcp (id=32) on dpaa2_rc0
dpaa2_mcp4: <DPAA2 MC portal> iomem 0x80c1f0000-0x80c1fffff at dpmcp (id=31) on dpaa2_rc0
dpaa2_mcp5: <DPAA2 MC portal> iomem 0x80c1e0000-0x80c1effff at dpmcp (id=30) on dpaa2_rc0
dpaa2_mcp6: <DPAA2 MC portal> iomem 0x80c1d0000-0x80c1dffff at dpmcp (id=29) on dpaa2_rc0
dpaa2_mcp7: <DPAA2 MC portal> iomem 0x80c1c0000-0x80c1cffff at dpmcp (id=28) on dpaa2_rc0
dpaa2_mcp8: <DPAA2 MC portal> iomem 0x80c1b0000-0x80c1bffff at dpmcp (id=27) on dpaa2_rc0
dpaa2_mcp9: <DPAA2 MC portal> iomem 0x80c1a0000-0x80c1affff at dpmcp (id=26) on dpaa2_rc0
dpaa2_mcp10: <DPAA2 MC portal> iomem 0x80c190000-0x80c19ffff at dpmcp (id=25) on dpaa2_rc0
dpaa2_mcp11: <DPAA2 MC portal> iomem 0x80c180000-0x80c18ffff at dpmcp (id=24) on dpaa2_rc0
dpaa2_mcp12: <DPAA2 MC portal> iomem 0x80c170000-0x80c17ffff at dpmcp (id=23) on dpaa2_rc0
dpaa2_mcp13: <DPAA2 MC portal> iomem 0x80c160000-0x80c16ffff at dpmcp (id=22) on dpaa2_rc0
dpaa2_mcp14: <DPAA2 MC portal> iomem 0x80c150000-0x80c15ffff at dpmcp (id=21) on dpaa2_rc0
dpaa2_mcp15: <DPAA2 MC portal> iomem 0x80c140000-0x80c14ffff at dpmcp (id=20) on dpaa2_rc0
dpaa2_mcp16: <DPAA2 MC portal> iomem 0x80c130000-0x80c13ffff at dpmcp (id=19) on dpaa2_rc0
dpaa2_mcp17: <DPAA2 MC portal> iomem 0x80c120000-0x80c12ffff at dpmcp (id=18) on dpaa2_rc0
dpaa2_mcp18: <DPAA2 MC portal> iomem 0x80c110000-0x80c11ffff at dpmcp (id=17) on dpaa2_rc0
dpaa2_mcp19: <DPAA2 MC portal> iomem 0x80c100000-0x80c10ffff at dpmcp (id=16) on dpaa2_rc0
dpaa2_mcp20: <DPAA2 MC portal> iomem 0x80c0f0000-0x80c0fffff at dpmcp (id=15) on dpaa2_rc0
dpaa2_mcp21: <DPAA2 MC portal> iomem 0x80c0e0000-0x80c0effff at dpmcp (id=14) on dpaa2_rc0
dpaa2_mcp22: <DPAA2 MC portal> iomem 0x80c0d0000-0x80c0dffff at dpmcp (id=13) on dpaa2_rc0
dpaa2_mcp23: <DPAA2 MC portal> iomem 0x80c0c0000-0x80c0cffff at dpmcp (id=12) on dpaa2_rc0
dpaa2_mcp24: <DPAA2 MC portal> iomem 0x80c0b0000-0x80c0bffff at dpmcp (id=11) on dpaa2_rc0
dpaa2_mcp25: <DPAA2 MC portal> iomem 0x80c0a0000-0x80c0affff at dpmcp (id=10) on dpaa2_rc0
dpaa2_mcp26: <DPAA2 MC portal> iomem 0x80c090000-0x80c09ffff at dpmcp (id=9) on dpaa2_rc0
dpaa2_mcp27: <DPAA2 MC portal> iomem 0x80c080000-0x80c08ffff at dpmcp (id=8) on dpaa2_rc0
dpaa2_mcp28: <DPAA2 MC portal> iomem 0x80c070000-0x80c07ffff at dpmcp (id=7) on dpaa2_rc0
dpaa2_mcp29: <DPAA2 MC portal> iomem 0x80c060000-0x80c06ffff at dpmcp (id=6) on dpaa2_rc0
dpaa2_mcp30: <DPAA2 MC portal> iomem 0x80c050000-0x80c05ffff at dpmcp (id=5) on dpaa2_rc0
dpaa2_mcp31: <DPAA2 MC portal> iomem 0x80c040000-0x80c04ffff at dpmcp (id=4) on dpaa2_rc0
dpaa2_mcp32: <DPAA2 MC portal> iomem 0x80c030000-0x80c03ffff at dpmcp (id=3) on dpaa2_rc0
dpaa2_mcp33: <DPAA2 MC portal> iomem 0x80c020000-0x80c02ffff at dpmcp (id=2) on dpaa2_rc0
dpaa2_mcp34: <DPAA2 MC portal> iomem 0x80c010000-0x80c01ffff at dpmcp (id=1) on dpaa2_rc0
dpaa2_bp0: <DPAA2 Buffer Pool> dpmcp (id=18) at dpbp (id=0) on dpaa2_rc0
dpaa2_mac0: <DPAA2 MAC> dpmcp (id=17) at dpmac (id=17) on dpaa2_rc0
dpaa2_mac1: <DPAA2 MAC> dpmcp (id=19) at dpmac (id=10) on dpaa2_rc0
dpaa2_mac2: <DPAA2 MAC> dpmcp (id=20) at dpmac (id=9) on dpaa2_rc0
dpaa2_mac3: <DPAA2 MAC> dpmcp (id=21) at dpmac (id=8) on dpaa2_rc0
dpaa2_mac4: <DPAA2 MAC> dpmcp (id=22) at dpmac (id=7) on dpaa2_rc0
dpaa2_mac5: <DPAA2 MAC> dpmcp (id=23) at dpmac (id=6) on dpaa2_rc0
dpaa2_mac6: <DPAA2 MAC> dpmcp (id=24) at dpmac (id=5) on dpaa2_rc0
dpaa2_mac7: <DPAA2 MAC> dpmcp (id=25) at dpmac (id=4) on dpaa2_rc0
dpaa2_mac8: <DPAA2 MAC> dpmcp (id=26) at dpmac (id=3) on dpaa2_rc0
dpaa2_io0: <DPAA2 I/O> iomem 0x818110000-0x81811ffff,0x81c110000-0x81c11ffff,0x2098110000-0x209811ffff dpmcp (id=27) at dpio (id=15) on dpaa2_rc0
dpaa2_io1: <DPAA2 I/O> iomem 0x818100000-0x81810ffff,0x81c100000-0x81c10ffff,0x2098100000-0x209810ffff dpmcp (id=28) at dpio (id=14) on dpaa2_rc0
dpaa2_io2: <DPAA2 I/O> iomem 0x8180f0000-0x8180fffff,0x81c0f0000-0x81c0fffff,0x20980f0000-0x20980fffff dpmcp (id=29) at dpio (id=13) on dpaa2_rc0
dpaa2_io3: <DPAA2 I/O> iomem 0x8180e0000-0x8180effff,0x81c0e0000-0x81c0effff,0x20980e0000-0x20980effff dpmcp (id=30) at dpio (id=12) on dpaa2_rc0
dpaa2_io4: <DPAA2 I/O> iomem 0x8180d0000-0x8180dffff,0x81c0d0000-0x81c0dffff,0x20980d0000-0x20980dffff dpmcp (id=31) at dpio (id=11) on dpaa2_rc0
dpaa2_io5: <DPAA2 I/O> iomem 0x8180c0000-0x8180cffff,0x81c0c0000-0x81c0cffff,0x20980c0000-0x20980cffff dpmcp (id=32) at dpio (id=10) on dpaa2_rc0
dpaa2_io6: <DPAA2 I/O> iomem 0x8180b0000-0x8180bffff,0x81c0b0000-0x81c0bffff,0x20980b0000-0x20980bffff dpmcp (id=33) at dpio (id=9) on dpaa2_rc0
dpaa2_io7: <DPAA2 I/O> iomem 0x8180a0000-0x8180affff,0x81c0a0000-0x81c0affff,0x20980a0000-0x20980affff dpmcp (id=34) at dpio (id=8) on dpaa2_rc0
dpaa2_io8: <DPAA2 I/O> iomem 0x818090000-0x81809ffff,0x81c090000-0x81c09ffff,0x2098090000-0x209809ffff dpmcp (id=35) at dpio (id=7) on dpaa2_rc0
dpaa2_io9: <DPAA2 I/O> iomem 0x818080000-0x81808ffff,0x81c080000-0x81c08ffff,0x2098080000-0x209808ffff dpmcp (id=11) at dpio (id=6) on dpaa2_rc0
dpaa2_io10: <DPAA2 I/O> iomem 0x818070000-0x81807ffff,0x81c070000-0x81c07ffff,0x2098070000-0x209807ffff dpmcp (id=12) at dpio (id=5) on dpaa2_rc0
dpaa2_io11: <DPAA2 I/O> iomem 0x818060000-0x81806ffff,0x81c060000-0x81c06ffff,0x2098060000-0x209806ffff dpmcp (id=13) at dpio (id=4) on dpaa2_rc0
dpaa2_io12: <DPAA2 I/O> iomem 0x818050000-0x81805ffff,0x81c050000-0x81c05ffff,0x2098050000-0x209805ffff dpmcp (id=14) at dpio (id=3) on dpaa2_rc0
dpaa2_io13: <DPAA2 I/O> iomem 0x818040000-0x81804ffff,0x81c040000-0x81c04ffff,0x2098040000-0x209804ffff dpmcp (id=15) at dpio (id=2) on dpaa2_rc0
dpaa2_io14: <DPAA2 I/O> iomem 0x818030000-0x81803ffff,0x81c030000-0x81c03ffff,0x2098030000-0x209803ffff dpmcp (id=16) at dpio (id=1) on dpaa2_rc0
dpaa2_io15: <DPAA2 I/O> iomem 0x818020000-0x81802ffff,0x81c020000-0x81c02ffff,0x2098020000-0x209802ffff dpmcp (id=1) at dpio (id=0) on dpaa2_rc0
dpaa2_con0: <DPAA2 Concentrator> dpmcp (id=2) at dpcon (id=15) on dpaa2_rc0
dpaa2_con1: <DPAA2 Concentrator> dpmcp (id=3) at dpcon (id=14) on dpaa2_rc0
dpaa2_con2: <DPAA2 Concentrator> dpmcp (id=4) at dpcon (id=13) on dpaa2_rc0
dpaa2_con3: <DPAA2 Concentrator> dpmcp (id=5) at dpcon (id=12) on dpaa2_rc0
dpaa2_con4: <DPAA2 Concentrator> dpmcp (id=6) at dpcon (id=11) on dpaa2_rc0
dpaa2_con5: <DPAA2 Concentrator> dpmcp (id=7) at dpcon (id=10) on dpaa2_rc0
dpaa2_con6: <DPAA2 Concentrator> dpmcp (id=8) at dpcon (id=9) on dpaa2_rc0
dpaa2_con7: <DPAA2 Concentrator> dpmcp (id=9) at dpcon (id=8) on dpaa2_rc0
dpaa2_con8: <DPAA2 Concentrator> dpmcp (id=10) at dpcon (id=7) on dpaa2_rc0
dpaa2_con9: <DPAA2 Concentrator> dpmcp (id=35) at dpcon (id=6) on dpaa2_rc0
dpaa2_con10: <DPAA2 Concentrator> dpmcp (id=34) at dpcon (id=5) on dpaa2_rc0
dpaa2_con11: <DPAA2 Concentrator> dpmcp (id=33) at dpcon (id=4) on dpaa2_rc0
dpaa2_con12: <DPAA2 Concentrator> dpmcp (id=32) at dpcon (id=3) on dpaa2_rc0
dpaa2_con13: <DPAA2 Concentrator> dpmcp (id=31) at dpcon (id=2) on dpaa2_rc0
dpaa2_con14: <DPAA2 Concentrator> dpmcp (id=30) at dpcon (id=1) on dpaa2_rc0
dpaa2_con15: <DPAA2 Concentrator> dpmcp (id=29) at dpcon (id=0) on dpaa2_rc0
dpaa2_ni0: <DPAA2 Network Interface> dpio (id=6-15,0-5) dpbp (id=0) dpcon (id=0-15) dpmcp (id=28) at dpni (id=0) on dpaa2_rc0
dpaa2_ni0: connected to dpmac (id=17)
dpaa2_ni0: connected DPMAC is in PHY mode
miibus0: <MII bus> on memacphy_acpi0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 1 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
dpaa2_ni0: channels=16
dpni0: Ethernet address: be:27:c1:05:00:11
pcib0: <Generic PCI host controller> on acpi0
pci0: <PCI bus> on pcib0
nvme0: <Generic NVMe Device> mem 0x46000000-0x46003fff at device 0.0 on pci0
pcib1: <Generic PCI host controller> on acpi0
pci1: <PCI bus> on pcib1
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x20-0x3f mem 0xa400080000-0xa4000fffff,0xa400504000-0xa400507fff at device 0.0 on pci1
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 16 RX queues 16 TX queues
ix0: Using MSI-X interrupts with 17 vectors
ix0: allocated for 16 queues
ix0: allocated for 16 rx queues
ix0: Ethernet address: 90:1b:0e:44:36:0f
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: eTrack 0x8000014d PHY FW V65535
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> mem 0xa400000000-0xa40007ffff,0xa400300000-0xa400303fff at device 0.1 on pci1
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 16 RX queues 16 TX queues
ix1: Using MSI-X interrupts with 17 vectors
ix1: allocated for 16 queues
ix1: allocated for 16 rx queues
ix1: Ethernet address: 90:1b:0e:44:36:10
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: eTrack 0x8000014d PHY FW V65535
acpi_ged0: <Generic Event Device> irq 9 on acpi0
acpi_ged0: Raw IRQ 69
acpi_button0: <Power Button> on acpi0
ahci0: <AHCI SATA controller> iomem 0x3200000-0x320ffff,0x700100520-0x700100523 irq 10,11,12 on acpi0
ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci0: quirks=0x2<NOPMP>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahci1: <AHCI SATA controller> iomem 0x3210000-0x321ffff irq 13,14,15 on acpi0
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci1: quirks=0x2<NOPMP>
ahcich1: <AHCI channel> at channel 0 on ahci1
ahci2: <AHCI SATA controller> iomem 0x3220000-0x322ffff irq 16,17,18 on acpi0
ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci2: quirks=0x2<NOPMP>
ahcich2: <AHCI channel> at channel 0 on ahci2
ahci3: <AHCI SATA controller> iomem 0x3230000-0x323ffff irq 19,20,21 on acpi0
ahci3: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported with FBS
ahci3: quirks=0x2<NOPMP>
ahcich3: <AHCI channel> at channel 0 on ahci3
snps_dwc3_acpi0: <Synopsys Designware DWC3> iomem 0x3100000-0x310ffff irq 25 on acpi0
snps_dwc3_acpi0: 64 bytes context size, 32-bit DMA
usbus0: trying to attach
usbus0 on snps_dwc3_acpi0
snps_dwc3_acpi1: <Synopsys Designware DWC3> iomem 0x3110000-0x311ffff irq 26 on acpi0
snps_dwc3_acpi1: 64 bytes context size, 32-bit DMA
usbus1: trying to attach
usbus1 on snps_dwc3_acpi1
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
device_attach: acpi_perf0 attach returned 6
device_attach: acpi_perf1 attach returned 6
device_attach: acpi_perf2 attach returned 6
device_attach: acpi_perf3 attach returned 6
device_attach: acpi_perf4 attach returned 6
device_attach: acpi_perf5 attach returned 6
device_attach: acpi_perf6 attach returned 6
device_attach: acpi_perf7 attach returned 6
device_attach: acpi_perf8 attach returned 6
device_attach: acpi_perf9 attach returned 6
device_attach: acpi_perf10 attach returned 6
device_attach: acpi_perf11 attach returned 6
device_attach: acpi_perf12 attach returned 6
device_attach: acpi_perf13 attach returned 6
device_attach: acpi_perf14 attach returned 6
device_attach: acpi_perf15 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
device_attach: acpi_perf0 attach returned 6
device_attach: acpi_perf1 attach returned 6
device_attach: acpi_perf2 attach returned 6
device_attach: acpi_perf3 attach returned 6
device_attach: acpi_perf4 attach returned 6
device_attach: acpi_perf5 attach returned 6
device_attach: acpi_perf6 attach returned 6
device_attach: acpi_perf7 attach returned 6
device_attach: acpi_perf8 attach returned 6
device_attach: acpi_perf9 attach returned 6
device_attach: acpi_perf10 attach returned 6
device_attach: acpi_perf11 attach returned 6
device_attach: acpi_perf12 attach returned 6
device_attach: acpi_perf13 attach returned 6
device_attach: acpi_perf14 attach returned 6
device_attach: acpi_perf15 attach returned 6
Timecounters tick every 1.000 msec
[nl_generic] genl_register_family: Registered family nlctrl id 16
[nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
acpi_tz0: failed to set new freq, disabling passive cooling
ugen0.1: <Synopsys XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Synopsys XHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
CPU 0: ARM Cortex-A72 r0p3 affinity: 0 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <>
Instruction Set Attributes 2 = <>
Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <>
Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
Memory Model Features 1 = <8bit VMID>
Memory Model Features 2 = <32bit CCIDX,48bit VA>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
Trying to mount root from cd9660:/dev/iso9660/14_0_CURRENT_AARCH64_CD [ro]...
CPU 1: ARM Cortex-A72 r0p3 affinity: 0 1
CPU 2: ARM Cortex-A72 r0p3 affinity: 1 0
CPU 3: ARM Cortex-A72 r0p3 affinity: 1 1
CPU 4: ARM Cortex-A72 r0p3 affinity: 2 0
CPU 5: ARM Cortex-A72 r0p3 affinity: 2 1
CPU 6: ARM Cortex-A72 r0p3 affinity: 3 0
CPU 7: ARM Cortex-A72 r0p3 affinity: 3 1
CPU 8: ARM Cortex-A72 r0p3 affinity: 4 0
CPU 9: ARM Cortex-A72 r0p3 affinity: 4 1
CPU 10: ARM Cortex-A72 r0p3 affinity: 5 0
CPU 11: ARM Cortex-A72 r0p3 affinity: 5 1
CPU 12: ARM Cortex-A72 r0p3 affinity: 6 0
CPU 13: ARM Cortex-A72 r0p3 affinity: 6 1
CPU 14: ARM Cortex-A72 r0p3 affinity: 7 0
CPU 15: ARM Cortex-A72 r0p3 affinity: 7 1
Release APs...done
WARNING: WITNESS option enabled, expect reduced performance.
nda0 at nvme0 bus 0 scbus4 target 0 lun 1
nda0: <SAMSUNG MZQLW1T9HMJP-00003 CXV8501Q S36WNB0J708774>
nda0: Serial Number S36WNB0J708774
nda0: nvme version 1.2 x4 (max x4) lanes PCIe Gen3 (max Gen3) link
nda0: 1831420MB (3750748848 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x04b4 product 0x6502> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x04b4 product 0x6502, class 9/0, rev 2.10/50.10, addr 1> on usbus1
uhub2: MTT enabled
Root mount waiting for: usbus0 usbus1
uhub2: 4 ports with 4 removable, self powered
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Generic USB Storage (0x05e3:0x0743)
ugen1.3: <vendor 0x0424 product 0x2514> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus1
uhub3: MTT enabled
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Generic USB Storage (0x05e3:0x0743)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Generic USB Storage (0x05e3:0x0743)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Generic USB Storage (0x05e3:0x0743)
ugen0.2: <Generic USB Storage> at usbus0
umass0 on uhub0
umass0: <Generic USB Storage, class 0/0, rev 3.00/8.28, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc101
umass0:5:0: Attached to scbus5
Root mount waiting for: usbus0 usbus1 CAM
uhub3: 4 ports with 3 removable, self powered
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
(probe0:umass-sim0:0:0:0): Retrying command (per sense data)
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <Generic STORAGE DEVICE 0828> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 000000000828
da0: 400.000MB/s transfers
da0: 121942MB (249737216 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
GEOM: da0: the secondary GPT header is not in the last LBA.
GEOM: iso9660/14_0_CURRENT_AARCH64_CD: the secondary GPT header is not in the last LBA.
GEOM: diskid/DISK-000000000828: the secondary GPT header is not in the last LBA.
Root mount waiting for: usbus1
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583)
ugen1.4: <USB SanDisk 3.2Gen1> at usbus1
umass1 on uhub3
umass1: <USB SanDisk 3.2Gen1, class 0/0, rev 2.10/1.00, addr 4> on usbus1
umass1: SCSI over Bulk-Only; quirks = 0xc100
umass1:6:1: Attached to scbus6
da1 at umass-sim1 bus 1 scbus6 target 0 lun 0
da1: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device
da1: Serial Number 010171bc771f368ab678bab11df8d0101d344ac4fa129e40a7c20e0632be
da1: 40.000MB/s transfers
da1: 29340MB (60088320 512 byte sectors)
da1: quirks=0x2<NO_6_BYTE>
ugen1.5: <vendor 0x04b4 product 0x6500> at usbus1
uhub4 on uhub1
uhub4: <vendor 0x04b4 product 0x6500, class 9/0, rev 3.00/50.10, addr 5> on usbus1
uhub4: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB SanDisk 3.2Gen1 (0x0781:0x5583)
ugen1.6: <USB SanDisk 3.2Gen1> at usbus1
umass2 on uhub4
umass2: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 7> on usbus1
umass2: SCSI over Bulk-Only; quirks = 0xc100
umass2:7:2: Attached to scbus7
da2 at umass-sim2 bus 2 scbus7 target 0 lun 0
da2: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device
da2: Serial Number 010163cd6ddd77f8b1bb0a30c69c14ea78c52e952b011e539662b112e83a
da2: 400.000MB/s transfers
da2: 29358MB (60125184 512 byte sectors)
da2: quirks=0x2<NO_6_BYTE>
GEOM: da2: the secondary GPT header is not in the last LBA.
lo0: link state changed to UP
dpni0: link state changed to DOWN
ix0: link state changed to UP
ix1: link state changed to UP
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment