`
bin/artemis create brokers/node1
bin/artemis create brokers/node2
brokers/node1/bin/artemis run
brokers/node2/bin/artemis run
docker run -it --rm --name haproxy -p 5672:5672 -v $(pwd)/haproxy/haproxy.cfg:/etc/haproxy/haproxy.cfg registry.connect.redhat.com/haproxytech/haproxy:1.7.9
`
testing with interconnect
docker run -it --rm --name qdr -p 5672:5672 -v $(pwd)/router/router-to-broker.conf:/etc/qpid-dispatch/qdrouterd.conf ceposta/qdrdock
| <?xml version='1.0'?> | |
| <!-- | |
| Licensed to the Apache Software Foundation (ASF) under one | |
| or more contributor license agreements. See the NOTICE file | |
| distributed with this work for additional information | |
| regarding copyright ownership. The ASF licenses this file | |
| to you under the Apache License, Version 2.0 (the | |
| "License"); you may not use this file except in compliance | |
| with the License. You may obtain a copy of the License at | |
| http://www.apache.org/licenses/LICENSE-2.0 | |
| Unless required by applicable law or agreed to in writing, | |
| software distributed under the License is distributed on an | |
| "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| KIND, either express or implied. See the License for the | |
| specific language governing permissions and limitations | |
| under the License. | |
| --> | |
| <configuration xmlns="urn:activemq" | |
| xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" | |
| xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd"> | |
| <core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" | |
| xsi:schemaLocation="urn:activemq:core "> | |
| <name>0.0.0.0</name> | |
| <!-- | |
| <connectors> | |
| <connector name="node1-connector">tcp://localhost:61616</connector> | |
| <connector name="node2-connector">tcp://localhost:61617</connector> | |
| </connectors> | |
| <cluster-user>admin</cluster-user> | |
| <cluster-password>admin</cluster-password> | |
| <cluster-connections> | |
| <cluster-connection name="static-cluster"> | |
| <connector-ref>node1-connector</connector-ref> | |
| <message-load-balancing>ON_DEMAND</message-load-balancing> | |
| <static-connectors> | |
| <connector-ref>node2-connector</connector-ref> | |
| </static-connectors> | |
| </cluster-connection> | |
| </cluster-connections>--> | |
| <persistence-enabled>true</persistence-enabled> | |
| <!-- this could be ASYNCIO, MAPPED, NIO | |
| ASYNCIO: Linux Libaio | |
| MAPPED: mmap files | |
| NIO: Plain Java Files | |
| --> | |
| <journal-type>NIO</journal-type> | |
| <paging-directory>./data/paging</paging-directory> | |
| <bindings-directory>./data/bindings</bindings-directory> | |
| <journal-directory>./data/journal</journal-directory> | |
| <large-messages-directory>./data/large-messages</large-messages-directory> | |
| <journal-datasync>true</journal-datasync> | |
| <journal-min-files>2</journal-min-files> | |
| <journal-pool-files>10</journal-pool-files> | |
| <journal-file-size>10M</journal-file-size> | |
| <!-- | |
| This value was determined through a calculation. | |
| Your system could perform 20.83 writes per millisecond | |
| on the current journal configuration. | |
| That translates as a sync write every 48000 nanoseconds. | |
| Note: If you specify 0 the system will perform writes directly to the disk. | |
| We recommend this to be 0 if you are using journalType=MAPPED and ournal-datasync=false. | |
| --> | |
| <journal-buffer-timeout>48000</journal-buffer-timeout> | |
| <!-- | |
| When using ASYNCIO, this will determine the writing queue depth for libaio. | |
| --> | |
| <journal-max-io>1</journal-max-io> | |
| <!-- | |
| You can verify the network health of a particular NIC by specifying the <network-check-NIC> element. | |
| <network-check-NIC>theNicName</network-check-NIC> | |
| --> | |
| <!-- | |
| Use this to use an HTTP server to validate the network | |
| <network-check-URL-list>http://www.apache.org</network-check-URL-list> --> | |
| <!-- <network-check-period>10000</network-check-period> --> | |
| <!-- <network-check-timeout>1000</network-check-timeout> --> | |
| <!-- this is a comma separated list, no spaces, just DNS or IPs | |
| it should accept IPV6 | |
| Warning: Make sure you understand your network topology as this is meant to validate if your network is valid. | |
| Using IPs that could eventually disappear or be partially visible may defeat the purpose. | |
| You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running --> | |
| <!-- <network-check-list>10.0.0.1</network-check-list> --> | |
| <!-- use this to customize the ping used for ipv4 addresses --> | |
| <!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> --> | |
| <!-- use this to customize the ping used for ipv6 addresses --> | |
| <!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> --> | |
| <!-- how often we are looking for how many bytes are being used on the disk in ms --> | |
| <disk-scan-period>5000</disk-scan-period> | |
| <!-- once the disk hits this limit the system will block, or close the connection in certain protocols | |
| that won't support flow control. --> | |
| <max-disk-usage>90</max-disk-usage> | |
| <!-- should the broker detect dead locks and other issues --> | |
| <critical-analyzer>true</critical-analyzer> | |
| <critical-analyzer-timeout>120000</critical-analyzer-timeout> | |
| <critical-analyzer-check-period>60000</critical-analyzer-check-period> | |
| <critical-analyzer-policy>HALT</critical-analyzer-policy> | |
| <!-- the system will enter into page mode once you hit this limit. | |
| This is an estimate in bytes of how much the messages are using in memory | |
| The system will use half of the available memory (-Xmx) by default for the global-max-size. | |
| You may specify a different value here if you need to customize it to your needs. | |
| <global-max-size>100Mb</global-max-size> | |
| --> | |
| <acceptors> | |
| <!-- useEpoll means: it will use Netty epoll if you are on a system (Linux) that supports it --> | |
| <!-- amqpCredits: The number of credits sent to AMQP producers --> | |
| <!-- amqpLowCredits: The server will send the # credits specified at amqpCredits at this low mark --> | |
| <!-- Acceptor for every supported protocol --> | |
| <acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300</acceptor> | |
| <!-- AMQP Acceptor. Listens on default AMQP port for AMQP traffic. | |
| <acceptor name="amqp">tcp://0.0.0.0:5672?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=AMQP;useEpoll=true;amqpCredits=1000;amqpMinCredits=300</acceptor>--> | |
| <!-- STOMP Acceptor. | |
| <acceptor name="stomp">tcp://0.0.0.0:61613?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=STOMP;useEpoll=true</acceptor>--> | |
| <!-- HornetQ Compatibility Acceptor. Enables HornetQ Core and STOMP for legacy HornetQ clients. | |
| <acceptor name="hornetq">tcp://0.0.0.0:5445?protocols=HORNETQ,STOMP;useEpoll=true</acceptor>--> | |
| <!-- MQTT Acceptor | |
| <acceptor name="mqtt">tcp://0.0.0.0:1883?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=MQTT;useEpoll=true</acceptor>--> | |
| </acceptors> | |
| <security-settings> | |
| <security-setting match="#"> | |
| <permission type="createNonDurableQueue" roles="amq"/> | |
| <permission type="deleteNonDurableQueue" roles="amq"/> | |
| <permission type="createDurableQueue" roles="amq"/> | |
| <permission type="deleteDurableQueue" roles="amq"/> | |
| <permission type="createAddress" roles="amq"/> | |
| <permission type="deleteAddress" roles="amq"/> | |
| <permission type="consume" roles="amq"/> | |
| <permission type="browse" roles="amq"/> | |
| <permission type="send" roles="amq"/> | |
| <!-- we need this otherwise ./artemis data imp wouldn't work --> | |
| <permission type="manage" roles="amq"/> | |
| </security-setting> | |
| </security-settings> | |
| <address-settings> | |
| <!-- if you define auto-create on certain queues, management has to be auto-create --> | |
| <address-setting match="activemq.management#"> | |
| <dead-letter-address>DLQ</dead-letter-address> | |
| <expiry-address>ExpiryQueue</expiry-address> | |
| <redelivery-delay>0</redelivery-delay> | |
| <!-- with -1 only the global-max-size is in use for limiting --> | |
| <max-size-bytes>-1</max-size-bytes> | |
| <message-counter-history-day-limit>10</message-counter-history-day-limit> | |
| <address-full-policy>PAGE</address-full-policy> | |
| <auto-create-queues>true</auto-create-queues> | |
| <auto-create-addresses>true</auto-create-addresses> | |
| <auto-create-jms-queues>true</auto-create-jms-queues> | |
| <auto-create-jms-topics>true</auto-create-jms-topics> | |
| </address-setting> | |
| <!--default for catch all--> | |
| <address-setting match="#"> | |
| <dead-letter-address>DLQ</dead-letter-address> | |
| <expiry-address>ExpiryQueue</expiry-address> | |
| <redelivery-delay>0</redelivery-delay> | |
| <!-- with -1 only the global-max-size is in use for limiting --> | |
| <max-size-bytes>-1</max-size-bytes> | |
| <message-counter-history-day-limit>10</message-counter-history-day-limit> | |
| <address-full-policy>PAGE</address-full-policy> | |
| <auto-create-queues>true</auto-create-queues> | |
| <auto-create-addresses>true</auto-create-addresses> | |
| <auto-create-jms-queues>true</auto-create-jms-queues> | |
| <auto-create-jms-topics>true</auto-create-jms-topics> | |
| <!--<redistribution-delay>0</redistribution-delay>--> | |
| </address-setting> | |
| </address-settings> | |
| <addresses> | |
| <address name="DLQ"> | |
| <anycast> | |
| <queue name="DLQ" /> | |
| </anycast> | |
| </address> | |
| <address name="ExpiryQueue"> | |
| <anycast> | |
| <queue name="ExpiryQueue" /> | |
| </anycast> | |
| </address> | |
| <address name="address.helloworld"> | |
| <anycast> | |
| <queue name="foo"/> | |
| </anycast> | |
| </address> | |
| <address name="SampleQueue"> | |
| <anycast> | |
| <queue name="SampleQueue"/> | |
| </anycast> | |
| </address> | |
| </addresses> | |
| </core> | |
| </configuration> |
| <?xml version='1.0'?> | |
| <!-- | |
| Licensed to the Apache Software Foundation (ASF) under one | |
| or more contributor license agreements. See the NOTICE file | |
| distributed with this work for additional information | |
| regarding copyright ownership. The ASF licenses this file | |
| to you under the Apache License, Version 2.0 (the | |
| "License"); you may not use this file except in compliance | |
| with the License. You may obtain a copy of the License at | |
| http://www.apache.org/licenses/LICENSE-2.0 | |
| Unless required by applicable law or agreed to in writing, | |
| software distributed under the License is distributed on an | |
| "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| KIND, either express or implied. See the License for the | |
| specific language governing permissions and limitations | |
| under the License. | |
| --> | |
| <configuration xmlns="urn:activemq" | |
| xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" | |
| xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd"> | |
| <core xmlns="urn:activemq:core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" | |
| xsi:schemaLocation="urn:activemq:core "> | |
| <name>0.0.0.0</name> | |
| <!-- | |
| <connectors> | |
| <connector name="node1-connector">tcp://localhost:61616</connector> | |
| <connector name="node2-connector">tcp://localhost:61617</connector> | |
| </connectors> | |
| <cluster-user>admin</cluster-user> | |
| <cluster-password>admin</cluster-password> | |
| <cluster-connections> | |
| <cluster-connection name="static-cluster"> | |
| <connector-ref>node2-connector</connector-ref> | |
| <message-load-balancing>ON_DEMAND</message-load-balancing> | |
| <static-connectors> | |
| <connector-ref>node1-connector</connector-ref> | |
| </static-connectors> | |
| </cluster-connection> | |
| </cluster-connections>--> | |
| <persistence-enabled>true</persistence-enabled> | |
| <!-- this could be ASYNCIO, MAPPED, NIO | |
| ASYNCIO: Linux Libaio | |
| MAPPED: mmap files | |
| NIO: Plain Java Files | |
| --> | |
| <journal-type>NIO</journal-type> | |
| <paging-directory>./data/paging</paging-directory> | |
| <bindings-directory>./data/bindings</bindings-directory> | |
| <journal-directory>./data/journal</journal-directory> | |
| <large-messages-directory>./data/large-messages</large-messages-directory> | |
| <journal-datasync>true</journal-datasync> | |
| <journal-min-files>2</journal-min-files> | |
| <journal-pool-files>10</journal-pool-files> | |
| <journal-file-size>10M</journal-file-size> | |
| <!-- | |
| This value was determined through a calculation. | |
| Your system could perform 20.83 writes per millisecond | |
| on the current journal configuration. | |
| That translates as a sync write every 48000 nanoseconds. | |
| Note: If you specify 0 the system will perform writes directly to the disk. | |
| We recommend this to be 0 if you are using journalType=MAPPED and ournal-datasync=false. | |
| --> | |
| <journal-buffer-timeout>48000</journal-buffer-timeout> | |
| <!-- | |
| When using ASYNCIO, this will determine the writing queue depth for libaio. | |
| --> | |
| <journal-max-io>1</journal-max-io> | |
| <!-- | |
| You can verify the network health of a particular NIC by specifying the <network-check-NIC> element. | |
| <network-check-NIC>theNicName</network-check-NIC> | |
| --> | |
| <!-- | |
| Use this to use an HTTP server to validate the network | |
| <network-check-URL-list>http://www.apache.org</network-check-URL-list> --> | |
| <!-- <network-check-period>10000</network-check-period> --> | |
| <!-- <network-check-timeout>1000</network-check-timeout> --> | |
| <!-- this is a comma separated list, no spaces, just DNS or IPs | |
| it should accept IPV6 | |
| Warning: Make sure you understand your network topology as this is meant to validate if your network is valid. | |
| Using IPs that could eventually disappear or be partially visible may defeat the purpose. | |
| You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running --> | |
| <!-- <network-check-list>10.0.0.1</network-check-list> --> | |
| <!-- use this to customize the ping used for ipv4 addresses --> | |
| <!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> --> | |
| <!-- use this to customize the ping used for ipv6 addresses --> | |
| <!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> --> | |
| <!-- how often we are looking for how many bytes are being used on the disk in ms --> | |
| <disk-scan-period>5000</disk-scan-period> | |
| <!-- once the disk hits this limit the system will block, or close the connection in certain protocols | |
| that won't support flow control. --> | |
| <max-disk-usage>90</max-disk-usage> | |
| <!-- should the broker detect dead locks and other issues --> | |
| <critical-analyzer>true</critical-analyzer> | |
| <critical-analyzer-timeout>120000</critical-analyzer-timeout> | |
| <critical-analyzer-check-period>60000</critical-analyzer-check-period> | |
| <critical-analyzer-policy>HALT</critical-analyzer-policy> | |
| <!-- the system will enter into page mode once you hit this limit. | |
| This is an estimate in bytes of how much the messages are using in memory | |
| The system will use half of the available memory (-Xmx) by default for the global-max-size. | |
| You may specify a different value here if you need to customize it to your needs. | |
| <global-max-size>100Mb</global-max-size> | |
| --> | |
| <acceptors> | |
| <!-- useEpoll means: it will use Netty epoll if you are on a system (Linux) that supports it --> | |
| <!-- amqpCredits: The number of credits sent to AMQP producers --> | |
| <!-- amqpLowCredits: The server will send the # credits specified at amqpCredits at this low mark --> | |
| <!-- Acceptor for every supported protocol --> | |
| <acceptor name="artemis">tcp://0.0.0.0:61617?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300</acceptor> | |
| <!-- AMQP Acceptor. Listens on default AMQP port for AMQP traffic. | |
| <acceptor name="amqp">tcp://0.0.0.0:5673?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=AMQP;useEpoll=true;amqpCredits=1000;amqpMinCredits=300</acceptor>--> | |
| <!-- STOMP Acceptor. | |
| <acceptor name="stomp">tcp://0.0.0.0:61614?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=STOMP;useEpoll=true</acceptor>--> | |
| <!-- HornetQ Compatibility Acceptor. Enables HornetQ Core and STOMP for legacy HornetQ clients. | |
| <acceptor name="hornetq">tcp://0.0.0.0:5446?protocols=HORNETQ,STOMP;useEpoll=true</acceptor>--> | |
| <!-- MQTT Acceptor | |
| <acceptor name="mqtt">tcp://0.0.0.0:1884?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=MQTT;useEpoll=true</acceptor>--> | |
| </acceptors> | |
| <security-settings> | |
| <security-setting match="#"> | |
| <permission type="createNonDurableQueue" roles="amq"/> | |
| <permission type="deleteNonDurableQueue" roles="amq"/> | |
| <permission type="createDurableQueue" roles="amq"/> | |
| <permission type="deleteDurableQueue" roles="amq"/> | |
| <permission type="createAddress" roles="amq"/> | |
| <permission type="deleteAddress" roles="amq"/> | |
| <permission type="consume" roles="amq"/> | |
| <permission type="browse" roles="amq"/> | |
| <permission type="send" roles="amq"/> | |
| <!-- we need this otherwise ./artemis data imp wouldn't work --> | |
| <permission type="manage" roles="amq"/> | |
| </security-setting> | |
| </security-settings> | |
| <address-settings> | |
| <!-- if you define auto-create on certain queues, management has to be auto-create --> | |
| <address-setting match="activemq.management#"> | |
| <dead-letter-address>DLQ</dead-letter-address> | |
| <expiry-address>ExpiryQueue</expiry-address> | |
| <redelivery-delay>0</redelivery-delay> | |
| <!-- with -1 only the global-max-size is in use for limiting --> | |
| <max-size-bytes>-1</max-size-bytes> | |
| <message-counter-history-day-limit>10</message-counter-history-day-limit> | |
| <address-full-policy>PAGE</address-full-policy> | |
| <auto-create-queues>true</auto-create-queues> | |
| <auto-create-addresses>true</auto-create-addresses> | |
| <auto-create-jms-queues>true</auto-create-jms-queues> | |
| <auto-create-jms-topics>true</auto-create-jms-topics> | |
| </address-setting> | |
| <!--default for catch all--> | |
| <address-setting match="#"> | |
| <dead-letter-address>DLQ</dead-letter-address> | |
| <expiry-address>ExpiryQueue</expiry-address> | |
| <redelivery-delay>0</redelivery-delay> | |
| <!-- with -1 only the global-max-size is in use for limiting --> | |
| <max-size-bytes>-1</max-size-bytes> | |
| <message-counter-history-day-limit>10</message-counter-history-day-limit> | |
| <address-full-policy>PAGE</address-full-policy> | |
| <auto-create-queues>true</auto-create-queues> | |
| <auto-create-addresses>true</auto-create-addresses> | |
| <auto-create-jms-queues>true</auto-create-jms-queues> | |
| <auto-create-jms-topics>true</auto-create-jms-topics> | |
| <!--<redistribution-delay>0</redistribution-delay>--> | |
| </address-setting> | |
| </address-settings> | |
| <addresses> | |
| <address name="DLQ"> | |
| <anycast> | |
| <queue name="DLQ" /> | |
| </anycast> | |
| </address> | |
| <address name="ExpiryQueue"> | |
| <anycast> | |
| <queue name="ExpiryQueue" /> | |
| </anycast> | |
| </address> | |
| <address name="address.helloworld"> | |
| <anycast> | |
| <queue name="foo"/> | |
| </anycast> | |
| </address> | |
| <address name="SampleQueue"> | |
| <anycast> | |
| <queue name="SampleQueue"/> | |
| </anycast> | |
| </address> | |
| </addresses> | |
| </core> | |
| </configuration> |
| #--------------------------------------------------------------------- | |
| # Example configuration for a possible web application. See the | |
| # full configuration options online. | |
| # | |
| # http://haproxy.1wt.eu/download/1.4/doc/configuration.txt | |
| # | |
| #--------------------------------------------------------------------- | |
| #--------------------------------------------------------------------- | |
| # Global settings | |
| #--------------------------------------------------------------------- | |
| global | |
| # to have these messages end up in /var/log/haproxy.log you will | |
| # need to: | |
| # | |
| # 1) configure syslog to accept network log events. This is done | |
| # by adding the '-r' option to the SYSLOGD_OPTIONS in | |
| # /etc/sysconfig/syslog | |
| # | |
| # 2) configure local2 events to go to the /var/log/haproxy.log | |
| # file. A line like the following can be added to | |
| # /etc/sysconfig/syslog | |
| # | |
| # local2.* /var/log/haproxy.log | |
| # | |
| log 127.0.0.1 local2 | |
| # unecessary since already in a container and runs w/ a non-root user | |
| # chroot /var/lib/haproxy | |
| # user haproxy | |
| # group haproxy | |
| # daemon | |
| pidfile /var/lib/haproxy/haproxy.pid | |
| maxconn 4000 | |
| # turn on stats unix socket | |
| stats socket /var/lib/haproxy/stats | |
| #--------------------------------------------------------------------- | |
| # common defaults that all the 'listen' and 'backend' sections will | |
| # use if not designated in their block | |
| #--------------------------------------------------------------------- | |
| defaults | |
| mode tcp | |
| log global | |
| option httplog | |
| option dontlognull | |
| # option http-server-close | |
| # option forwardfor except 127.0.0.0/8 | |
| option redispatch | |
| retries 3 | |
| timeout http-request 10s | |
| timeout queue 1m | |
| timeout connect 10s | |
| timeout client 1m | |
| timeout server 1m | |
| timeout http-keep-alive 10s | |
| timeout check 10s | |
| maxconn 3000 | |
| default-server init-addr last,libc,none | |
| #--------------------------------------------------------------------- | |
| # main frontend which proxys to the backends | |
| #--------------------------------------------------------------------- | |
| frontend main | |
| bind *:5672 | |
| # bind *:8443 ssl # To be completed .... | |
| #acl url_static path_beg -i /static /images /javascript /stylesheets | |
| #acl url_static path_end -i .jpg .gif .png .css .js | |
| # use_backend static if url_static | |
| default_backend brokers | |
| #--------------------------------------------------------------------- | |
| # round robin balancing between the various backends | |
| #--------------------------------------------------------------------- | |
| backend brokers | |
| balance roundrobin | |
| server node1 172.20.12.11:61616 check | |
| server node2 172.20.12.11:61617 check |
| router { | |
| mode: standalone | |
| id: routerToBroker | |
| # workerThreads: 4 | |
| } | |
| listener { | |
| role: normal | |
| host: 0.0.0.0 | |
| port: 5672 | |
| linkCapacity: 1000 | |
| } | |
| log { | |
| module: DEFAULT | |
| # enable: trace+ | |
| # timestamp: true | |
| } | |
| address { | |
| prefix: SampleQueue | |
| waypoint: yes | |
| } | |
| autoLink { | |
| addr: SampleQueue | |
| dir: in | |
| connection: node1 | |
| } | |
| autoLink { | |
| addr: SampleQueue | |
| dir: out | |
| connection: node1 | |
| } | |
| connector { | |
| host: 10.208.71.216 | |
| name: node1 | |
| port: 61616 | |
| role: route-container | |
| allowRedirect: no | |
| } |