Created
December 28, 2012 00:31
-
-
Save yongbin/4393495 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.3-STABLE amd64] (local build) | |
| Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Device Model: ST2000DM001-1CH164 | |
| Serial Number: Z1E2F6N3 | |
| LU WWN Device Id: 5 000c50 04f3f9e25 | |
| Firmware Version: CC24 | |
| User Capacity: 2,000,398,934,016 bytes [2.00 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: 8 | |
| ATA Standard is: ATA-8-ACS revision 4 | |
| Local Time is: Fri Dec 28 09:25:44 2012 KST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 584) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 219) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x3085) SCT Status supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 115 100 006 Pre-fail Always - 100531304 | |
| 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 2 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail Always - 27228222 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 212 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 071 070 045 Old_age Always - 29 (Min/Max 24/30) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1746 | |
| 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (0 24 0 0 0) | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 200544907952241 | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1954316074 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 41415686 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Author
Author
ad7
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.3-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Intel X18-M/X25-M/X25-V G2 SSDs
Device Model: INTEL SSDSA2M080G2GC
Serial Number: BTPO051300RH080JGN
LU WWN Device Id: 5 001517 0ed6e014c
Firmware Version: 2CV102HD
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Fri Dec 28 09:25:56 2012 KST
==> WARNING: This drive may require a firmware update to
fix possible drive hangs when reading SMART self-test log:
http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18363
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x75) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0
4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 2
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 16976
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28
192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9
225 Host_Writes_32MiB 0x0030 200 200 000 Old_age Offline - 509916
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 4725
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 1
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 1963019476
232 Available_Reservd_Space 0x0033 099 099 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 094 094 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 099 Pre-fail Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
ad5