z0r0z · July 12, 2023 14:05 · z0r0z · Jul 12, 2023 · z0r0z · Jul 12, 2023
diff --git a/AssetContractShared.sol b/AssetContractShared.sol
 pragma solidity ^0.5.12;

 /**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 *
 * _Since v2.5.0:_ this module is now much more gas efficient, given net gas
 * metering changes introduced in the Istanbul hardfork.
 */
 contract ReentrancyGuard {
    bool private _notEntered;

    constructor () internal {
        // Storing an initial non-zero value makes deployment a bit more
        // expensive, but in exchange the refund on every call to nonReentrant
        // will be lower in amount. Since refunds are capped to a percetange of
        // the total transaction's gas, it is best to keep them low in cases
        // like this one, to increase the likelihood of the full refund coming
        // into effect.
        _notEntered = true;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_notEntered, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _notEntered = false;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _notEntered = true;
    }
 }

 /*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
 contract Context {
    // Empty internal constructor, to prevent people from mistakenly deploying
    // an instance of this contract, which should be used via inheritance.
    constructor () internal { }
    // solhint-disable-previous-line no-empty-blocks

    function _msgSender() internal view returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
 }

 /**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
 contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Returns true if the caller is the current owner.
     */
    function isOwner() public view returns (bool) {
        return _msgSender() == _owner;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
 }

 /**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
 library SafeMath {


  /**
   * @dev Multiplies two unsigned integers, reverts on overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (a == 0) {
      return 0;
    }


    uint256 c = a * b;
    require(c / a == b, "SafeMath#mul: OVERFLOW");


    return c;
  }


  /**
   * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    // Solidity only automatically asserts when dividing by 0
    require(b > 0, "SafeMath#div: DIVISION_BY_ZERO");
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold


    return c;
  }


  /**
   * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b <= a, "SafeMath#sub: UNDERFLOW");
    uint256 c = a - b;


    return c;
  }


  /**
   * @dev Adds two unsigned integers, reverts on overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a, "SafeMath#add: OVERFLOW");


    return c;
  }


  /**
   * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
   * reverts when dividing by zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0, "SafeMath#mod: DIVISION_BY_ZERO");
    return a % b;
  }


 }

 /**
 * @title ERC165
 * @dev https://github.com/ethereum/EIPs/blob/master/EIPS/eip-165.md
 */
 interface IERC165 {


    /**
     * @notice Query if a contract implements an interface
     * @dev Interface identification is specified in ERC-165. This function
     * uses less than 30,000 gas
     * @param _interfaceId The interface identifier, as specified in ERC-165
     */
    function supportsInterface(bytes4 _interfaceId)
    external
    view
    returns (bool);
 }

 /**
 * @dev ERC-1155 interface for accepting safe transfers.
 */
 interface IERC1155TokenReceiver {


  /**
   * @notice Handle the receipt of a single ERC1155 token type
   * @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeTransferFrom` after the balance has been updated
   * This function MAY throw to revert and reject the transfer
   * Return of other amount than the magic value MUST result in the transaction being reverted
   * Note: The token contract address is always the message sender
   * @param _operator  The address which called the `safeTransferFrom` function
   * @param _from      The address which previously owned the token
   * @param _id        The id of the token being transferred
   * @param _amount    The amount of tokens being transferred
   * @param _data      Additional data with no specified format
   * @return           `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
   */
  function onERC1155Received(address _operator, address _from, uint256 _id, uint256 _amount, bytes calldata _data) external returns(bytes4);


  /**
   * @notice Handle the receipt of multiple ERC1155 token types
   * @dev An ERC1155-compliant smart contract MUST call this function on the token recipient contract, at the end of a `safeBatchTransferFrom` after the balances have been updated
   * This function MAY throw to revert and reject the transfer
   * Return of other amount than the magic value WILL result in the transaction being reverted
   * Note: The token contract address is always the message sender
   * @param _operator  The address which called the `safeBatchTransferFrom` function
   * @param _from      The address which previously owned the token
   * @param _ids       An array containing ids of each token being transferred
   * @param _amounts   An array containing amounts of each token being transferred
   * @param _data      Additional data with no specified format
   * @return           `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
   */
  function onERC1155BatchReceived(address _operator, address _from, uint256[] calldata _ids, uint256[] calldata _amounts, bytes calldata _data) external returns(bytes4);


  /**
   * @notice Indicates whether a contract implements the `ERC1155TokenReceiver` functions and so can accept ERC1155 token types.
   * @param  interfaceID The ERC-165 interface ID that is queried for support.s
   * @dev This function MUST return true if it implements the ERC1155TokenReceiver interface and ERC-165 interface.
   *      This function MUST NOT consume more than 5,000 gas.
   * @return Wheter ERC-165 or ERC1155TokenReceiver interfaces are supported.
   */
  function supportsInterface(bytes4 interfaceID) external view returns (bool);


 }

 interface IERC1155 {
  // Events


  /**
   * @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred, including zero amount transfers as well as minting or burning
   *   Operator MUST be msg.sender
   *   When minting/creating tokens, the `_from` field MUST be set to `0x0`
   *   When burning/destroying tokens, the `_to` field MUST be set to `0x0`
   *   The total amount transferred from address 0x0 minus the total amount transferred to 0x0 may be used by clients and exchanges to be added to the "circulating supply" for a given token ID
   *   To broadcast the existence of a token ID with no initial balance, the contract SHOULD emit the TransferSingle event from `0x0` to `0x0`, with the token creator as `_operator`, and a `_amount` of 0
   */
  event TransferSingle(address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _amount);


  /**
   * @dev Either TransferSingle or TransferBatch MUST emit when tokens are transferred, including zero amount transfers as well as minting or burning
   *   Operator MUST be msg.sender
   *   When minting/creating tokens, the `_from` field MUST be set to `0x0`
   *   When burning/destroying tokens, the `_to` field MUST be set to `0x0`
   *   The total amount transferred from address 0x0 minus the total amount transferred to 0x0 may be used by clients and exchanges to be added to the "circulating supply" for a given token ID
   *   To broadcast the existence of multiple token IDs with no initial balance, this SHOULD emit the TransferBatch event from `0x0` to `0x0`, with the token creator as `_operator`, and a `_amount` of 0
   */
  event TransferBatch(address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _amounts);


  /**
   * @dev MUST emit when an approval is updated
   */
  event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);


  /**
   * @dev MUST emit when the URI is updated for a token ID
   *   URIs are defined in RFC 3986
   *   The URI MUST point a JSON file that conforms to the "ERC-1155 Metadata JSON Schema"
   */
  event URI(string _amount, uint256 indexed _id);


  /**
   * @notice Transfers amount of an _id from the _from address to the _to address specified
   * @dev MUST emit TransferSingle event on success
   * Caller must be approved to manage the _from account's tokens (see isApprovedForAll)
   * MUST throw if `_to` is the zero address
   * MUST throw if balance of sender for token `_id` is lower than the `_amount` sent
   * MUST throw on any other error
   * When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0). If so, it MUST call `onERC1155Received` on `_to` and revert if the return amount is not `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
   * @param _from    Source address
   * @param _to      Target address
   * @param _id      ID of the token type
   * @param _amount  Transfered amount
   * @param _data    Additional data with no specified format, sent in call to `_to`
   */
  function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes calldata _data) external;


  /**
   * @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
   * @dev MUST emit TransferBatch event on success
   * Caller must be approved to manage the _from account's tokens (see isApprovedForAll)
   * MUST throw if `_to` is the zero address
   * MUST throw if length of `_ids` is not the same as length of `_amounts`
   * MUST throw if any of the balance of sender for token `_ids` is lower than the respective `_amounts` sent
   * MUST throw on any other error
   * When transfer is complete, this function MUST check if `_to` is a smart contract (code size > 0). If so, it MUST call `onERC1155BatchReceived` on `_to` and revert if the return amount is not `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
   * Transfers and events MUST occur in the array order they were submitted (_ids[0] before _ids[1], etc)
   * @param _from     Source addresses
   * @param _to       Target addresses
   * @param _ids      IDs of each token type
   * @param _amounts  Transfer amounts per token type
   * @param _data     Additional data with no specified format, sent in call to `_to`
  */
  function safeBatchTransferFrom(address _from, address _to, uint256[] calldata _ids, uint256[] calldata _amounts, bytes calldata _data) external;
 
  /**
   * @notice Get the balance of an account's Tokens
   * @param _owner  The address of the token holder
   * @param _id     ID of the Token
   * @return        The _owner's balance of the Token type requested
   */
  function balanceOf(address _owner, uint256 _id) external view returns (uint256);


  /**
   * @notice Get the balance of multiple account/token pairs
   * @param _owners The addresses of the token holders
   * @param _ids    ID of the Tokens
   * @return        The _owner's balance of the Token types requested (i.e. balance for each (owner, id) pair)
   */
  function balanceOfBatch(address[] calldata _owners, uint256[] calldata _ids) external view returns (uint256[] memory);


  /**
   * @notice Enable or disable approval for a third party ("operator") to manage all of caller's tokens
   * @dev MUST emit the ApprovalForAll event on success
   * @param _operator  Address to add to the set of authorized operators
   * @param _approved  True if the operator is approved, false to revoke approval
   */
  function setApprovalForAll(address _operator, bool _approved) external;


  /**
   * @notice Queries the approval status of an operator for a given owner
   * @param _owner     The owner of the Tokens
   * @param _operator  Address of authorized operator
   * @return           True if the operator is approved, false if not
   */
  function isApprovedForAll(address _owner, address _operator) external view returns (bool isOperator);


 }

 /**
 * Copyright 2018 ZeroEx Intl.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *   http://www.apache.org/licenses/LICENSE-2.0
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

 /**
 * Utility library of inline functions on addresses
 */
 library Address {


  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param account address of the account to check
   * @return whether the target address is a contract
   */
  function isContract(address account) internal view returns (bool) {
    bytes32 codehash;
    bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;


    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    assembly { codehash := extcodehash(account) }
    return (codehash != 0x0 && codehash != accountHash);
  }


 }

 /**
 * @dev Implementation of Multi-Token Standard contract
 */
 contract ERC1155 is IERC165 {
  using SafeMath for uint256;
  using Address for address;




  /***********************************|
  |        Variables and Events       |
  |__________________________________*/


  // onReceive function signatures
  bytes4 constant internal ERC1155_RECEIVED_VALUE = 0xf23a6e61;
  bytes4 constant internal ERC1155_BATCH_RECEIVED_VALUE = 0xbc197c81;


  // Objects balances
  mapping (address => mapping(uint256 => uint256)) internal balances;


  // Operator Functions
  mapping (address => mapping(address => bool)) internal operators;


  // Events
  event TransferSingle(address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _amount);
  event TransferBatch(address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _amounts);
  event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
  event URI(string _uri, uint256 indexed _id);




  /***********************************|
  |     Public Transfer Functions     |
  |__________________________________*/


  /**
   * @notice Transfers amount amount of an _id from the _from address to the _to address specified
   * @param _from    Source address
   * @param _to      Target address
   * @param _id      ID of the token type
   * @param _amount  Transfered amount
   * @param _data    Additional data with no specified format, sent in call to `_to`
   */
  function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount, bytes memory _data)
    public
  {
    require((msg.sender == _from) || isApprovedForAll(_from, msg.sender), "ERC1155#safeTransferFrom: INVALID_OPERATOR");
    require(_to != address(0),"ERC1155#safeTransferFrom: INVALID_RECIPIENT");
    // require(_amount >= balances[_from][_id]) is not necessary since checked with safemath operations


    _safeTransferFrom(_from, _to, _id, _amount);
    _callonERC1155Received(_from, _to, _id, _amount, _data);
  }


  /**
   * @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
   * @param _from     Source addresses
   * @param _to       Target addresses
   * @param _ids      IDs of each token type
   * @param _amounts  Transfer amounts per token type
   * @param _data     Additional data with no specified format, sent in call to `_to`
   */
  function safeBatchTransferFrom(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
    public
  {
    // Requirements
    require((msg.sender == _from) || isApprovedForAll(_from, msg.sender), "ERC1155#safeBatchTransferFrom: INVALID_OPERATOR");
    require(_to != address(0), "ERC1155#safeBatchTransferFrom: INVALID_RECIPIENT");


    _safeBatchTransferFrom(_from, _to, _ids, _amounts);
    _callonERC1155BatchReceived(_from, _to, _ids, _amounts, _data);
  }




  /***********************************|
  |    Internal Transfer Functions    |
  |__________________________________*/


  /**
   * @notice Transfers amount amount of an _id from the _from address to the _to address specified
   * @param _from    Source address
   * @param _to      Target address
   * @param _id      ID of the token type
   * @param _amount  Transfered amount
   */
  function _safeTransferFrom(address _from, address _to, uint256 _id, uint256 _amount)
    internal
  {
    // Update balances
    balances[_from][_id] = balances[_from][_id].sub(_amount); // Subtract amount
    balances[_to][_id] = balances[_to][_id].add(_amount);     // Add amount


    // Emit event
    emit TransferSingle(msg.sender, _from, _to, _id, _amount);
  }


  /**
   * @notice Verifies if receiver is contract and if so, calls (_to).onERC1155Received(...)
   */
  function _callonERC1155Received(address _from, address _to, uint256 _id, uint256 _amount, bytes memory _data)
    internal
  {
    // Check if recipient is contract
    if (_to.isContract()) {
      bytes4 retval = IERC1155TokenReceiver(_to).onERC1155Received(msg.sender, _from, _id, _amount, _data);
      require(retval == ERC1155_RECEIVED_VALUE, "ERC1155#_callonERC1155Received: INVALID_ON_RECEIVE_MESSAGE");
    }
  }


  /**
   * @notice Send multiple types of Tokens from the _from address to the _to address (with safety call)
   * @param _from     Source addresses
   * @param _to       Target addresses
   * @param _ids      IDs of each token type
   * @param _amounts  Transfer amounts per token type
   */
  function _safeBatchTransferFrom(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts)
    internal
  {
    require(_ids.length == _amounts.length, "ERC1155#_safeBatchTransferFrom: INVALID_ARRAYS_LENGTH");


    // Number of transfer to execute
    uint256 nTransfer = _ids.length;


    // Executing all transfers
    for (uint256 i = 0; i < nTransfer; i++) {
      // Update storage balance of previous bin
      balances[_from][_ids[i]] = balances[_from][_ids[i]].sub(_amounts[i]);
      balances[_to][_ids[i]] = balances[_to][_ids[i]].add(_amounts[i]);
    }


    // Emit event
    emit TransferBatch(msg.sender, _from, _to, _ids, _amounts);
  }


  /**
   * @notice Verifies if receiver is contract and if so, calls (_to).onERC1155BatchReceived(...)
   */
  function _callonERC1155BatchReceived(address _from, address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
    internal
  {
    // Pass data if recipient is contract
    if (_to.isContract()) {
      bytes4 retval = IERC1155TokenReceiver(_to).onERC1155BatchReceived(msg.sender, _from, _ids, _amounts, _data);
      require(retval == ERC1155_BATCH_RECEIVED_VALUE, "ERC1155#_callonERC1155BatchReceived: INVALID_ON_RECEIVE_MESSAGE");
    }
  }




  /***********************************|
  |         Operator Functions        |
  |__________________________________*/


  /**
   * @notice Enable or disable approval for a third party ("operator") to manage all of caller's tokens
   * @param _operator  Address to add to the set of authorized operators
   * @param _approved  True if the operator is approved, false to revoke approval
   */
  function setApprovalForAll(address _operator, bool _approved)
    external
  {
    // Update operator status
    operators[msg.sender][_operator] = _approved;
    emit ApprovalForAll(msg.sender, _operator, _approved);
  }


  /**
   * @notice Queries the approval status of an operator for a given owner
   * @param _owner     The owner of the Tokens
   * @param _operator  Address of authorized operator
   * @return True if the operator is approved, false if not
   */
  function isApprovedForAll(address _owner, address _operator)
    public view returns (bool isOperator)
  {
    return operators[_owner][_operator];
  }




  /***********************************|
  |         Balance Functions         |
  |__________________________________*/


  /**
   * @notice Get the balance of an account's Tokens
   * @param _owner  The address of the token holder
   * @param _id     ID of the Token
   * @return The _owner's balance of the Token type requested
   */
  function balanceOf(address _owner, uint256 _id)
    public view returns (uint256)
  {
    return balances[_owner][_id];
  }


  /**
   * @notice Get the balance of multiple account/token pairs
   * @param _owners The addresses of the token holders
   * @param _ids    ID of the Tokens
   * @return        The _owner's balance of the Token types requested (i.e. balance for each (owner, id) pair)
   */
  function balanceOfBatch(address[] memory _owners, uint256[] memory _ids)
    public view returns (uint256[] memory)
  {
    require(_owners.length == _ids.length, "ERC1155#balanceOfBatch: INVALID_ARRAY_LENGTH");


    // Variables
    uint256[] memory batchBalances = new uint256[](_owners.length);


    // Iterate over each owner and token ID
    for (uint256 i = 0; i < _owners.length; i++) {
      batchBalances[i] = balances[_owners[i]][_ids[i]];
    }


    return batchBalances;
  }




  /***********************************|
  |          ERC165 Functions         |
  |__________________________________*/


  /**
   * INTERFACE_SIGNATURE_ERC165 = bytes4(keccak256("supportsInterface(bytes4)"));
   */
  bytes4 constant private INTERFACE_SIGNATURE_ERC165 = 0x01ffc9a7;


  /**
   * INTERFACE_SIGNATURE_ERC1155 =
   * bytes4(keccak256("safeTransferFrom(address,address,uint256,uint256,bytes)")) ^
   * bytes4(keccak256("safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)")) ^
   * bytes4(keccak256("balanceOf(address,uint256)")) ^
   * bytes4(keccak256("balanceOfBatch(address[],uint256[])")) ^
   * bytes4(keccak256("setApprovalForAll(address,bool)")) ^
   * bytes4(keccak256("isApprovedForAll(address,address)"));
   */
  bytes4 constant private INTERFACE_SIGNATURE_ERC1155 = 0xd9b67a26;


  /**
   * @notice Query if a contract implements an interface
   * @param _interfaceID  The interface identifier, as specified in ERC-165
   * @return `true` if the contract implements `_interfaceID` and
   */
  function supportsInterface(bytes4 _interfaceID) external view returns (bool) {
    if (_interfaceID == INTERFACE_SIGNATURE_ERC165 ||
        _interfaceID == INTERFACE_SIGNATURE_ERC1155) {
      return true;
    }
    return false;
  }


 }

 /**
 * @notice Contract that handles metadata related methods.
 * @dev Methods assume a deterministic generation of URI based on token IDs.
 *      Methods also assume that URI uses hex representation of token IDs.
 */
 contract ERC1155Metadata {


  // URI's default URI prefix
  string internal baseMetadataURI;
  event URI(string _uri, uint256 indexed _id);




  /***********************************|
  |     Metadata Public Function s    |
  |__________________________________*/


  /**
   * @notice A distinct Uniform Resource Identifier (URI) for a given token.
   * @dev URIs are defined in RFC 3986.
   *      URIs are assumed to be deterministically generated based on token ID
   *      Token IDs are assumed to be represented in their hex format in URIs
   * @return URI string
   */
  function uri(uint256 _id) public view returns (string memory) {
    return string(abi.encodePacked(baseMetadataURI, _uint2str(_id), ".json"));
  }




  /***********************************|
  |    Metadata Internal Functions    |
  |__________________________________*/


  /**
   * @notice Will emit default URI log event for corresponding token _id
   * @param _tokenIDs Array of IDs of tokens to log default URI
   */
  function _logURIs(uint256[] memory _tokenIDs) internal {
    string memory baseURL = baseMetadataURI;
    string memory tokenURI;


    for (uint256 i = 0; i < _tokenIDs.length; i++) {
      tokenURI = string(abi.encodePacked(baseURL, _uint2str(_tokenIDs[i]), ".json"));
      emit URI(tokenURI, _tokenIDs[i]);
    }
  }


  /**
   * @notice Will emit a specific URI log event for corresponding token
   * @param _tokenIDs IDs of the token corresponding to the _uris logged
   * @param _URIs    The URIs of the specified _tokenIDs
   */
  function _logURIs(uint256[] memory _tokenIDs, string[] memory _URIs) internal {
    require(_tokenIDs.length == _URIs.length, "ERC1155Metadata#_logURIs: INVALID_ARRAYS_LENGTH");
    for (uint256 i = 0; i < _tokenIDs.length; i++) {
      emit URI(_URIs[i], _tokenIDs[i]);
    }
  }


  /**
   * @notice Will update the base URL of token's URI
   * @param _newBaseMetadataURI New base URL of token's URI
   */
  function _setBaseMetadataURI(string memory _newBaseMetadataURI) internal {
    baseMetadataURI = _newBaseMetadataURI;
  }




  /***********************************|
  |    Utility Internal Functions     |
  |__________________________________*/


  /**
   * @notice Convert uint256 to string
   * @param _i Unsigned integer to convert to string
   */
  function _uint2str(uint256 _i) internal pure returns (string memory _uintAsString) {
    if (_i == 0) {
      return "0";
    }


    uint256 j = _i;
    uint256 ii = _i;
    uint256 len;


    // Get number of bytes
    while (j != 0) {
      len++;
      j /= 10;
    }


    bytes memory bstr = new bytes(len);
    uint256 k = len - 1;


    // Get each individual ASCII
    while (ii != 0) {
      bstr[k--] = byte(uint8(48 + ii % 10));
      ii /= 10;
    }


    // Convert to string
    return string(bstr);
  }


 }

 /**
 * @dev Multi-Fungible Tokens with minting and burning methods. These methods assume
 *      a parent contract to be executed as they are `internal` functions
 */
 contract ERC1155MintBurn is ERC1155 {




  /****************************************|
  |            Minting Functions           |
  |_______________________________________*/


  /**
   * @notice Mint _amount of tokens of a given id
   * @param _to      The address to mint tokens to
   * @param _id      Token id to mint
   * @param _amount  The amount to be minted
   * @param _data    Data to pass if receiver is contract
   */
  function _mint(address _to, uint256 _id, uint256 _amount, bytes memory _data)
    internal
  {
    // Add _amount
    balances[_to][_id] = balances[_to][_id].add(_amount);


    // Emit event
    emit TransferSingle(msg.sender, address(0x0), _to, _id, _amount);


    // Calling onReceive method if recipient is contract
    _callonERC1155Received(address(0x0), _to, _id, _amount, _data);
  }


  /**
   * @notice Mint tokens for each ids in _ids
   * @param _to       The address to mint tokens to
   * @param _ids      Array of ids to mint
   * @param _amounts  Array of amount of tokens to mint per id
   * @param _data    Data to pass if receiver is contract
   */
  function _batchMint(address _to, uint256[] memory _ids, uint256[] memory _amounts, bytes memory _data)
    internal
  {
    require(_ids.length == _amounts.length, "ERC1155MintBurn#batchMint: INVALID_ARRAYS_LENGTH");


    // Number of mints to execute
    uint256 nMint = _ids.length;


     // Executing all minting
    for (uint256 i = 0; i < nMint; i++) {
      // Update storage balance
      balances[_to][_ids[i]] = balances[_to][_ids[i]].add(_amounts[i]);
    }


    // Emit batch mint event
    emit TransferBatch(msg.sender, address(0x0), _to, _ids, _amounts);


    // Calling onReceive method if recipient is contract
    _callonERC1155BatchReceived(address(0x0), _to, _ids, _amounts, _data);
  }




  /****************************************|
  |            Burning Functions           |
  |_______________________________________*/


  /**
   * @notice Burn _amount of tokens of a given token id
   * @param _from    The address to burn tokens from
   * @param _id      Token id to burn
   * @param _amount  The amount to be burned
   */
  function _burn(address _from, uint256 _id, uint256 _amount)
    internal
  {
    //Substract _amount
    balances[_from][_id] = balances[_from][_id].sub(_amount);


    // Emit event
    emit TransferSingle(msg.sender, _from, address(0x0), _id, _amount);
  }


  /**
   * @notice Burn tokens of given token id for each (_ids[i], _amounts[i]) pair
   * @param _from     The address to burn tokens from
   * @param _ids      Array of token ids to burn
   * @param _amounts  Array of the amount to be burned
   */
  function _batchBurn(address _from, uint256[] memory _ids, uint256[] memory _amounts)
    internal
  {
    require(_ids.length == _amounts.length, "ERC1155MintBurn#batchBurn: INVALID_ARRAYS_LENGTH");


    // Number of mints to execute
    uint256 nBurn = _ids.length;


     // Executing all minting
    for (uint256 i = 0; i < nBurn; i++) {
      // Update storage balance
      balances[_from][_ids[i]] = balances[_from][_ids[i]].sub(_amounts[i]);
    }


    // Emit batch mint event
    emit TransferBatch(msg.sender, _from, address(0x0), _ids, _amounts);
  }


 }

 library Strings {
  // via https://github.com/oraclize/ethereum-api/blob/master/oraclizeAPI_0.5.sol
  function strConcat(string memory _a, string memory _b, string memory _c, string memory _d, string memory _e) internal pure returns (string memory) {
      bytes memory _ba = bytes(_a);
      bytes memory _bb = bytes(_b);
      bytes memory _bc = bytes(_c);
      bytes memory _bd = bytes(_d);
      bytes memory _be = bytes(_e);
      string memory abcde = new string(_ba.length + _bb.length + _bc.length + _bd.length + _be.length);
      bytes memory babcde = bytes(abcde);
      uint k = 0;
      for (uint i = 0; i < _ba.length; i++) babcde[k++] = _ba[i];
      for (uint i = 0; i < _bb.length; i++) babcde[k++] = _bb[i];
      for (uint i = 0; i < _bc.length; i++) babcde[k++] = _bc[i];
      for (uint i = 0; i < _bd.length; i++) babcde[k++] = _bd[i];
      for (uint i = 0; i < _be.length; i++) babcde[k++] = _be[i];
      return string(babcde);
    }


    function strConcat(string memory _a, string memory _b, string memory _c, string memory _d) internal pure returns (string memory) {
        return strConcat(_a, _b, _c, _d, "");
    }


    function strConcat(string memory _a, string memory _b, string memory _c) internal pure returns (string memory) {
        return strConcat(_a, _b, _c, "", "");
    }


    function strConcat(string memory _a, string memory _b) internal pure returns (string memory) {
        return strConcat(_a, _b, "", "", "");
    }


    function uint2str(uint _i) internal pure returns (string memory _uintAsString) {
        if (_i == 0) {
            return "0";
        }
        uint j = _i;
        uint len;
        while (j != 0) {
            len++;
            j /= 10;
        }
        bytes memory bstr = new bytes(len);
        uint k = len - 1;
        while (_i != 0) {
            bstr[k--] = byte(uint8(48 + _i % 10));
            _i /= 10;
        }
        return string(bstr);
    }
 }

 contract OwnableDelegateProxy {}

 contract ProxyRegistry {
    mapping(address => OwnableDelegateProxy) public proxies;
 }

 /**
 * @title ERC1155Tradable
 * ERC1155Tradable - ERC1155 contract that whitelists an operator address, has create and mint functionality, and supports useful standards from OpenZeppelin,
  like exists(), name(), symbol(), and totalSupply()
 */
 contract ERC1155Tradable is ERC1155, ERC1155MintBurn, ERC1155Metadata, Ownable {
    using Address for address;

    // Proxy registry address
    address public proxyRegistryAddress;
    // Contract name
    string public name;
    // Contract symbol
    string public symbol;

    mapping(uint256 => uint256) public totalSupply;

    constructor(
        string memory _name,
        string memory _symbol,
        address _proxyRegistryAddress
    ) public {
        name = _name;
        symbol = _symbol;
        proxyRegistryAddress = _proxyRegistryAddress;
    }

    /**
     * @dev Throws if called by any account other than the owner or their proxy
     */
    modifier onlyOwnerOrProxy() {
        require(
            _isOwnerOrProxy(_msgSender()),
            "ERC1155Tradable#onlyOwner: CALLER_IS_NOT_OWNER"
        );
        _;
    }

    /**
     * @dev Throws if called by any account other than _from or their proxy
     */
    modifier onlyApproved(address _from) {
        require(
            _from == _msgSender() || isApprovedForAll(_from, _msgSender()),
            "ERC1155Tradable#onlyApproved: CALLER_NOT_ALLOWED"
        );
        _;
    }

    function _isOwnerOrProxy(address _address) internal view returns (bool) {
        return owner() == _address || _isProxyForUser(owner(), _address);
    }

    /**
     * Override isApprovedForAll to whitelist user's OpenSea proxy accounts to enable gas-free listings.
     */
    function isApprovedForAll(address _owner, address _operator)
        public
        view
        returns (bool isOperator)
    {
        // Whitelist OpenSea proxy contracts for easy trading.
        if (_isProxyForUser(_owner, _operator)) {
            return true;
        }

        return super.isApprovedForAll(_owner, _operator);
    }

    /**
     * @dev Mints some amount of tokens to an address
     * @param _to          Address of the future owner of the token
     * @param _id          Token ID to mint
     * @param _quantity    Amount of tokens to mint
     * @param _data        Data to pass if receiver is contract
     */
    function mint(
        address _to,
        uint256 _id,
        uint256 _quantity,
        bytes memory _data
    ) public onlyOwnerOrProxy {
        _mint(_to, _id, _quantity, _data);
    }

    /**
     * @dev Mint tokens for each id in _ids
     * @param _to          The address to mint tokens to
     * @param _ids         Array of ids to mint
     * @param _quantities  Array of amounts of tokens to mint per id
     * @param _data        Data to pass if receiver is contract
     */
    function batchMint(
        address _to,
        uint256[] memory _ids,
        uint256[] memory _quantities,
        bytes memory _data
    ) public onlyOwnerOrProxy {
        _batchMint(_to, _ids, _quantities, _data);
    }

    /**
     * @dev Burns amount of a given token id
     * @param _from          The address to burn tokens from
     * @param _id          Token ID to burn
     * @param _quantity    Amount to burn
     */
    function burn(
        address _from,
        uint256 _id,
        uint256 _quantity
    ) public onlyApproved(_from) {
        _burn(_from, _id, _quantity);
    }

    /**
     * @dev Burns tokens for each id in _ids
     * @param _from          The address to burn tokens from
     * @param _ids         Array of token ids to burn
     * @param _quantities  Array of the amount to be burned
     */
    function batchBurn(
        address _from,
        uint256[] memory _ids,
        uint256[] memory _quantities
    ) public onlyApproved(_from) {
        _batchBurn(_from, _ids, _quantities);
    }

    /**
     * @dev Returns whether the specified token is minted
     * @param _id uint256 ID of the token to query the existence of
     * @return bool whether the token exists
     */
    function exists(uint256 _id) public view returns (bool) {
        return totalSupply[_id] > 0;
    }

    // PROXY HELPER METHODS

    function _isProxyForUser(address _user, address _address)
        internal
        view
        returns (bool)
    {
        if (!proxyRegistryAddress.isContract()) {
            return false;
        }
        ProxyRegistry proxyRegistry = ProxyRegistry(proxyRegistryAddress);
        return address(proxyRegistry.proxies(_user)) == _address;
    }  
 }

 /**
 * @title AssetContract
 * AssetContract - A contract for easily creating non-fungible assets on OpenSea.
 */
 contract AssetContract is ERC1155Tradable {
    uint256 constant TOKEN_SUPPLY_CAP = 1;

    string public templateURI;

    // Optional mapping for token URIs
    mapping(uint256 => string) private _tokenURI;

    modifier onlyTokenAmountOwned(
        address _from,
        uint256 _id,
        uint256 _quantity
    ) {
        require(
            _ownsTokenAmount(_from, _id, _quantity),
            "AssetContract#onlyTokenAmountOwned: ONLY_TOKEN_AMOUNT_OWNED_ALLOWED"
        );
        _;
    }

    constructor(
        string memory _name,
        string memory _symbol,
        address _proxyRegistryAddress,
        string memory _templateURI
    ) public ERC1155Tradable(_name, _symbol, _proxyRegistryAddress) {
        if (bytes(_templateURI).length > 0) {
            setTemplateURI(_templateURI);
        }
    }

    function openSeaVersion() public pure returns (string memory) {
        return "2.0.0";
    }

    /**
     * @dev Require _from to own a specified quantity of the token
     */
    function _ownsTokenAmount(
        address _from,
        uint256 _id,
        uint256 _quantity
    ) internal view returns (bool) {
        return balanceOf(_from, _id) >= _quantity;
    }

    /**
     * Compat for factory interfaces on OpenSea
     * Indicates that this contract can return balances for
     * tokens that haven't been minted yet
     */
    function supportsFactoryInterface() public pure returns (bool) {
        return true;
    }

    function setTemplateURI(string memory _uri) public onlyOwnerOrProxy {
        templateURI = _uri;
    }

    function setURI(uint256 _id, string memory _uri)
        public
        onlyOwnerOrProxy
    {
        _setURI(_id, _uri);
    }

    function uri(uint256 _id) public view returns (string memory) {
        string memory tokenUri = _tokenURI[_id];
        if (bytes(tokenUri).length != 0) {
            return tokenUri;
        }
        return templateURI;
    }

    function balanceOf(address _owner, uint256 _id)
        public
        view
        returns (uint256)
    {
        uint256 balance = super.balanceOf(_owner, _id);
        return
            _isCreatorOrProxy(_id, _owner)
                ? balance + _remainingSupply(_id)
                : balance;
    }

    function safeTransferFrom(
        address _from,
        address _to,
        uint256 _id,
        uint256 _amount,
        bytes memory _data
    ) public {
        uint256 mintedBalance = super.balanceOf(_from, _id);
        if (mintedBalance < _amount) {
            // Only mint what _from doesn't already have
            mint(_to, _id, _amount - mintedBalance, _data);
            if (mintedBalance > 0) {
                super.safeTransferFrom(_from, _to, _id, mintedBalance, _data);
            }
        } else {
            super.safeTransferFrom(_from, _to, _id, _amount, _data);
        }
    }

    function safeBatchTransferFrom(
        address _from,
        address _to,
        uint256[] memory _ids,
        uint256[] memory _amounts,
        bytes memory _data
    ) public {
        require(
            _ids.length == _amounts.length,
            "AssetContract#safeBatchTransferFrom: INVALID_ARRAYS_LENGTH"
        );
        for (uint256 i = 0; i < _ids.length; i++) {
            safeTransferFrom(_from, _to, _ids[i], _amounts[i], _data);
        }
    }

    function _beforeMint(uint256 _id, uint256 _quantity)
        internal
        view
    {
        require(
            _quantity <= _remainingSupply(_id),
            "AssetContract#_beforeMint: QUANTITY_EXCEEDS_TOKEN_SUPPLY_CAP"
        );
    }

    // Overrides ERC1155Tradable burn to check for quantity owned
    function burn(
        address _from,
        uint256 _id,
        uint256 _quantity
    ) public onlyTokenAmountOwned(_from, _id, _quantity) {
        super.burn(_from, _id, _quantity);
    }

    // Overrides ERC1155Tradable batchBurn to check for quantity owned
    function batchBurn(
        address _from,
        uint256[] memory _ids,
        uint256[] memory _quantities
    ) public {
        for (uint256 i = 0; i < _ids.length; i++) {
            require(
                _ownsTokenAmount(_from, _ids[i], _quantities[i]),
                "AssetContract#batchBurn: ONLY_TOKEN_AMOUNT_OWNED_ALLOWED"
            );
        }
        super.batchBurn(_from, _ids, _quantities);
    }

    function _mint(
        address _to,
        uint256 _id,
        uint256 _quantity,
        bytes memory _data
    ) internal {
        super._mint(_to, _id, _quantity, _data);
        if (_data.length > 1) {
            _setURI(_id, string(_data));
        }
    }

    function _isCreatorOrProxy(uint256, address _address)
        internal
        view
        returns (bool)
    {
        return _isOwnerOrProxy(_address);
    }

    function _remainingSupply(uint256 _id)
        internal
        view
        returns (uint256)
    {
        return TOKEN_SUPPLY_CAP - totalSupply[_id];
    }

    // Override ERC1155Tradable for birth events
    function _origin(
        uint256 /* _id */
    ) internal view returns (address) {
        return owner();
    }

    function _batchMint(
        address _to,
        uint256[] memory _ids,
        uint256[] memory _quantities,
        bytes memory _data
    ) internal {
        super._batchMint(_to, _ids, _quantities, _data);
        if (_data.length > 1) {
            for (uint256 i = 0; i < _ids.length; i++) {
                _setURI(_ids[i], string(_data));
            }
        }
    }

    function _setURI(uint256 _id, string memory _uri) internal {
        _tokenURI[_id] = _uri;
        emit URI(_uri, _id);
    }
 }

 /*
  DESIGN NOTES:
  Token ids are a concatenation of:
 * creator: hex address of the creator of the token. 160 bits
 * index: Index for this token (the regular ID), up to 2^56 - 1. 56 bits
 * supply: Supply cap for this token, up to 2^40 - 1 (1 trillion).  40 bits

 */
 /**
 * @title TokenIdentifiers
 * support for authentication and metadata for token ids
 */
 library TokenIdentifiers {
    uint8 constant INDEX_BITS = 56;
    uint8 constant SUPPLY_BITS = 40;

    function tokenCreator(uint256 _id) internal pure returns (address) {
        return address(uint160(_id >> (INDEX_BITS + SUPPLY_BITS)));
    }
 }

 /**
 * @title AssetContractShared
 * OpenSea shared asset contract - A contract for easily creating custom assets on OpenSea
 */
 contract AssetContractShared is AssetContract, ReentrancyGuard {
    mapping(address => bool) public sharedProxyAddresses;

    struct Ownership {
        uint256 id;
        address owner;
    }

    using TokenIdentifiers for uint256;

    event CreatorChanged(uint256 indexed _id, address indexed _creator);

    mapping(uint256 => address) internal _creatorOverride;

    /**
     * @dev Require msg.sender to be the creator of the token id
     */
    modifier creatorOnly(uint256 _id) {
        require(
            _isCreatorOrProxy(_id, _msgSender()),
            "AssetContractShared#creatorOnly: ONLY_CREATOR_ALLOWED"
        );
        _;
    }

    constructor(
        string memory _name,
        string memory _symbol,
        address _proxyRegistryAddress,
        string memory _templateURI
    ) public AssetContract(_name, _symbol, _proxyRegistryAddress, _templateURI) {}

    /**
     * @dev Allows owner to change the proxy registry
     */
    function setProxyRegistryAddress(address _address) public onlyOwnerOrProxy {
        proxyRegistryAddress = _address;
    }

    /**
     * @dev Allows owner to add a shared proxy address
     */
    function addSharedProxyAddress(address _address) public onlyOwnerOrProxy {
        sharedProxyAddresses[_address] = true;
    }

    /**
     * @dev Allows owner to remove a shared proxy address
     */
    function removeSharedProxyAddress(address _address)
        public
        onlyOwnerOrProxy
    {
        delete sharedProxyAddresses[_address];
    }

    function mint(
        address _to,
        uint256 _id,
        uint256 _quantity,
        bytes memory _data
    ) public nonReentrant creatorOnly(_id) {
        _mint(_to, _id, _quantity, _data);
    }

    function batchMint(
        address _to,
        uint256[] memory _ids,
        uint256[] memory _quantities,
        bytes memory _data
    ) public nonReentrant {
        for (uint256 i = 0; i < _ids.length; i++) {
            require(
                _isCreatorOrProxy(_ids[i], _msgSender()),
                "AssetContractShared#_batchMint: ONLY_CREATOR_ALLOWED"
            );
        }
        _batchMint(_to, _ids, _quantities, _data);
    }

    /////////////////////////////////
    // CONVENIENCE CREATOR METHODS //
    /////////////////////////////////

    /**
     * @dev Will update the URI for the token
     * @param _id The token ID to update. msg.sender must be its creator
     * @param _uri New URI for the token.
     */
    function setURI(uint256 _id, string memory _uri)
        public
        creatorOnly(_id)
    {
        _setURI(_id, _uri);
    }

    /**
     * @dev Change the creator address for given token
     * @param _to   Address of the new creator
     * @param _id  Token IDs to change creator of
     */
    function setCreator(uint256 _id, address _to) public creatorOnly(_id) {
        require(
            _to != address(0),
            "AssetContractShared#setCreator: INVALID_ADDRESS."
        );
        _creatorOverride[_id] = _to;
        emit CreatorChanged(_id, _to);
    }

    /**
     * @dev Get the creator for a token
     * @param _id   The token id to look up
     */
    function creator(uint256 _id) public view returns (address) {
        if (_creatorOverride[_id] != address(0)) {
            return _creatorOverride[_id];
        } else {
            return _id.tokenCreator();
        }
    }

    // Override ERC1155Tradable for birth events
    function _origin(uint256 _id) internal view returns (address) {
        return _id.tokenCreator();
    }

    function _requireMintable(address _address, uint256 _id) internal view {
        require(
            _isCreatorOrProxy(_id, _address),
            "AssetContractShared#_requireMintable: ONLY_CREATOR_ALLOWED"
        );
    }

    function _isCreatorOrProxy(uint256 _id, address _address)
        internal
        view
        returns (bool)
    {
        address creator_ = creator(_id);
        return creator_ == _address || _isProxyForUser(creator_, _address);
    }

    // Overrides ERC1155Tradable to allow a shared proxy address
    function _isProxyForUser(address _user, address _address)
        internal
        view
        returns (bool)
    {
        if (sharedProxyAddresses[_address]) {
            return true;
        }
        return super._isProxyForUser(_user, _address);
    }
 }