The QS-Zigbee-S10-C03 is a Smart Switch module for Garage Doors based on the BK7238 microcontroller (Available here: https://s.click.aliexpress.com/e/_c4teQDSR )
To save you some time, these are the pin configurations:
P1 -> The builtin button
P8 -> The Relay
P9 -> The door sensor
P24 -> The blue led
I grouped all of the inputs under the same group (1) and placed the door sensor in a separate group (2)
You can use the following link to configure them the same way (just replace the <ADDRESS> placeholder):
http://<ADDRESS>/cfg_pins?0=0&r0=0&1=3&r1=1&e1=0&2=0&r2=0&3=0&r3=0&4=0&r4=0&5=0&r5=0&6=0&r6=0&7=0&r7=0&8=1&r8=1&9=12&r9=2&10=0&r10=0&11=0&r11=0&12=0&r12=0&13=0&r13=0&14=0&r14=0&15=0&r15=0&16=0&r16=0&17=0&r17=0&18=0&r18=0&19=0&r19=0&20=0&r20=0&21=0&r21=0&22=0&r22=0&23=0&r23=0&24=5&r24=1&25=0&r25=0&26=0&r26=0&27=0&r27=0&28=0&r28=0