Zac zmrow

You can double-check the docker data directory with this, but I considered too dangerous to include in the rm -rf command.

docker info | grep 'Docker Root Dir' | grep -oE '/.*'

Nuke Docker from Orbit

This was inspired by the concise works of jeff's Skinner Box

Primary Article to begin with:

Lets make sure that we have all the sheilds up!

Update root's mail recipient. Open /etc/aliases replacing [email protected] with an administrator's email address. This is where logs will be emailed.
```
root:     [email protected]
```
Update the the default umask to 027. Edit the file /etc/init.d/rc and change the following setting:

umask 027

People

	use quick_xml::events::Event;
	use quick_xml::{Reader, Writer};

	/// Prettify XML by adding proper new lines and indentation.
	///
	/// This uses the quick_xml library (https://github.com/tafia/quick-xml) to read/parse the given
	/// XML string and then write it to a string as indented XML. This isn't perfect and most likely
	/// not the most efficient.
	///
	/// One strange behavior is that a closing element tag is not put on a new line if it follows a

	#!/bin/bash
	# logs the temperature every minute
	# sends a message if it is too high or low or if it can't be measured
	# also sends a message at a given time every day

	#sensor ID (must be a DS18B20 sensor)
	SENSOR_ID="28-011453d372aa"
	# hour when to send the message
	REF_HOUR="17:00"
	# maximum temperature

	# Controlling my Buva Qstream ventilation system using:
	# * A Wemos D1 mini lite (an ESP8266 based board)
	# * A Wemos power shield so I can power the Wemos from the ventilation units 12V supply.
	# * A simple PWM to 10V convertor like this: https://www.cheaptech.nl/pwm-signaal-te-voltage-converter-1-3-khz-0-10-v-pw.html
	# * The amazing ESPHome firmware tool: https://esphome.io
	# * Home Assistant to tie it all together: https://www.home-assistant.io
	#
	# I used to use a Raspberry Pi and some Python code for this. See https://gist.github.com/SqyD/a927ab612df767a0cc892bcde23d025c
	# The Wemos approach seems more stable and doesn't require external USB power.

	# A xterm-256color based TERMINFO that adds the escape sequences for italic.
	#
	# Install:
	#
	# tic xterm-256color-italic.terminfo
	#
	# Usage:
	#
	# export TERM=xterm-256color-italic
	#