An enhanced PowerShell prompt function that incorporates some of my other PowerShell modules to provide a daily management experience.

dailyprompt.ps1

#requires -version 5.1

<#
The complete version of the function also requires additional modules
which can be downloaded from the PowerShell Gallery.

https://github.com/jdhitsolutions/PSCalendar
https://github.com/jdhitsolutions/myTickle

If you prefer to
skip some of the features in this function you'll need to remove those lines
and modify the following requires statements.

The function requires a windows platform.
#>

#requires -module PSCalendar
#requires -module myTickle

Function prompt {

    $charHash = @{
        Up   = 0x25b2 -as [char]
        Down = 0x25bc -as [char]
    }

    Try {
        #verify there is a global hashtable variable
        Get-Variable -Name rsHash -Scope global -ErrorAction Stop | Out-Null
    }
    Catch {
        #create the runspace and synchronized hashtable
        $global:rsHash = [hashtable]::Synchronized(@{Computername = $env:computername; results = ""; date = (Get-Date); computers = @()})
        $newRunspace = [runspacefactory]::CreateRunspace()
        #set apartment state if available
        if ($newRunspace.ApartmentState) {
            $newRunspace.ApartmentState = "STA"
        }
        $newRunspace.ThreadOptions = "ReuseThread"
        $newRunspace.Open()
        $newRunspace.SessionStateProxy.SetVariable("rsHash", $rsHash)

        $pscmd = [PowerShell]::Create().AddScript( {

                #define scriptblock to run remotely
                $sb = {

                    Try {
                        $mem = Get-CimInstance -ClassName win32_operatingsystem -Property TotalVisibleMemorySize, FreePhysicalMemory -ErrorAction Stop -OperationTimeoutSec 2
                        $memUsage = ($mem.FreePhysicalMemory / $mem.TotalVisibleMemorySize) * 100 -as [int]
                        $disk = Get-CimInstance -Classname win32_logicaldisk -filter "deviceID = 'c:'" -Property DeviceID, Size, FreeSpace -ErrorAction Stop -OperationTimeoutSec 2
                        $diskFree = ($disk.FreeSpace / $disk.Size) * 100 -as [int]
                        #get a count of all processes except idle and system and subtract 1 for the remote connection
                        $proc = (Get-Process).Where( {$_.name -notmatch 'Idle|system'}).count - 1
                        $os = Get-CimInstance -ClassName win32_operatingsystem -Property lastbootupTime
                        $isUp = $True
                    }
                    catch {
                        #this will probably never be used
                        $memUsage = 0
                        $diskFree = 0
                        $isUp = $False
                        Processes = 0
                        OS = ""
                    }
                    [pscustomobject]@{
                        Computername = $env:computername
                        MemoryUsage  = $memUsage
                        DiskFree     = $diskFree
                        Processes    = $proc
                        IsUp         = $IsUp
                        Uptime       = ((Get-Date) - $os.LastBootUpTime).toString("d\.hh\:mm\:ss")
                    }
                } #end scriptblock

                #define a pssession option to speed up connections
                $opt = New-PSSessionOption -OpenTimeout 1000 -MaxConnectionRetryCount 1

                do {
                    $computers = $env:computername
                 <#
                  23 January 2019
                  This version of the prompt is only querying the local computer so I have
                  commented out code that you would use to get information from remote computers.

                    #define a pssession option to speed up connections.
                    $opt = New-PSSessionOption -OpenTimeout 1000 -MaxConnectionRetryCount 1
                     $computers | Where-Object {(get-pssession).where( {$_.state -eq 'opened'}).computername -notcontains $_} |
                        ForEach-Object {
                        #make sure there are sessions for all computers in the list
                        New-PSSession -ComputerName $_ -SessionOption $opt
                    }
                    #remove broken sessions
                    Get-PSSession | Where-Object {$_.state -eq 'broken'} | Remove-PSSession
                    #>

                    $global:rsHash.date = Get-Date
                    $global:rshash.computers = $computers

                    #uncomment the other parameters if querying remote computers
                    $results = Invoke-Command -ScriptBlock $sb #-HideComputerName  -Session (Get-PSSession)
                    #set a sleep interval between tests
                    $global:rsHash.results = $results
                    Start-Sleep -Seconds 10
                } While ($True)
            }) # script
            }) # script
        $pscmd.runspace = $newrunspace
        [void]$psCmd.BeginInvoke()
    } #catch

    #guess at a line length
    #Note that this code is copied from other prompts that were displaying information
    #from multiple computers. This version is only querying the local host but I'm
    #leaving this since it doesn't break anything and you may want to go back to a version
    #that queries other computers.
    $names = ($global:rshash.computers | Measure-Object -Property length -sum).sum
    #account for a : after each name + character + value
    #you may have to tweak this value to get everything to line up
    #and it might depend on whether you are using the console or ISE
    $len = $names + (($global:rshash.computers.count) * 20) + 1

    ######### PSCALENDAR CODE  #########
    #display calendar
    #check if y is greater than 3
    if ($host.ui.RawUI.CursorPosition.y -le 10) {
        $Y = $host.ui.RawUI.CursorPosition.Y
    }
    else {
        $Y = $host.ui.RawUI.CursorPosition.Y - 3
    }
    $X = 75

    Show-Calendar -position ([System.Management.Automation.Host.Coordinates]::new($X, $Y))
    ######### PSCALENDAR CODE  #########

    #display local computername and datetime
    $dt = "{2} {0} {1} " -f (Get-Date).toshortdatestring(), (Get-Date).TolongTimeString(), $env:computername
    Write-Host "`n " -NoNewline
    Write-Host $dt -ForegroundColor black -BackgroundColor gray

    ######### TICKLE CODE  #########
    #get tickle events
    $tickle = Get-TickleEvent -days 10
    if ($tickle) {
        #get length of longest event for padding purposes
        $evtlen = ($tickle | sort-object {$_.event.length} -Descending)[0].event.length
        foreach ($item in $tickle) {
            #date time is formatted for North America
            $evtString = " {0} {1:MM/dd/yyyy hh:mm:ss} [{2}]" -f $item.event.padright($evtlen), $item.date, $item.countdown.tostring("dd\.hh\:mm\:ss")
            if ($item.countdown.totalhours -le 24) {
                $fg = "red"
            }
            elseif ($item.countdown.TotalHours -le 48) {
                $fg = "yellow"
            }
            else {
                $fg = "green"
            }
            Write-Host $evtString -ForegroundColor $fg
        }
    }
    ######### TICKLE CODE  #########

    Write-Host "$([char]0x250c)" -NoNewline
    Write-Host $(([char]0x2500).ToString() * $len ) -NoNewline
    Write-Host $([char]0x2510)
    Write-Host " " -NoNewline

    if ($global:rsHash.results) {

        #create a hashtable from the results
        $h = $global:rshash.results | Group-Object -Property Computername -AsHashTable -AsString

        #sort the results by computername
        foreach ($item in $global:rshash.computers) {

            if ($h[$item]) {
                $obj = $h[$item]
            }
            else {
                #create a temporary object for computer that is not running but in the list
                $obj = [pscustomobject]@{
                    Computername = $item.ToUpper()
                    Uptime       = (New-TimeSpan).toString()
                    DiskFree     = "00"
                    MemoryUsage  = "00"
                    Processes    = "00"
                    IsUp         = $false
                }
            }

            if ($obj.DiskFree -le 20) {
                $diskfg = "red"
            }
            elseif ($obj.DiskFree -le 75) {
                $diskfg = "yellow"
            }
            else {
                $diskfg = "green"
            }
            if ($obj.MemoryUsage -le 30) {
                $memfg = "red"
            }
            elseif ($obj.MemoryUsage -le 60) {
                $memfg = "yellow"
            }
            else {
                $memfg = "green"
            }

            if ($obj.IsUp) {
                Write-Host " $($charHash.Up)" -ForegroundColor green -NoNewline
                $upfg = "green"
            }
            else {
                Write-Host " $($charHash.down)" -ForegroundColor red -NoNewline
                $upfg = "red"
            }

            Write-Host $obj.Uptime -ForegroundColor $upfg -NoNewline
            Write-Host " $([char]0x058d)$($obj.diskfree)%" -NoNewline -ForegroundColor $diskfg
            Write-Host " $([char]0x3bc)$($obj.MemoryUsage)%"-NoNewline -ForegroundColor $memfg
            Write-Host " p$($obj.Processes)" -NoNewline

        } #foreach
    }
    else {
        Write-Host "Working..." -ForegroundColor yellow -NoNewline
    }

    Write-Host " "
    Write-Host $([char]0x2514) -NoNewline
    Write-Host $(([char]0x2500).ToString() * $len ) -NoNewline
    Write-Host $([char]0x2518)
    "PS $($executionContext.SessionState.Path.CurrentLocation)$('>' * ($nestedPromptLevel + 1)) "

}