Skip to content

Instantly share code, notes, and snippets.

@zultron

zultron/bootlog.txt

Last active July 30, 2020 11:50
Show Gist options
  • Save zultron/82fcebd24042eb3b2d427692acd5c421 to your computer and use it in GitHub Desktop.
Save zultron/82fcebd24042eb3b2d427692acd5c421 to your computer and use it in GitHub Desktop.
Download ZIP
BPi-R2 boot log and dmesg
Raw
bootlog.txt
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.189-bpi-r2-main (jman@bpi-r2) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Wed Jul 29 18:50:53 UTC 2020
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Bananapi BPI-R2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] [WMT-CONSYS-HW][W]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xffe00000, size: 0x100000
[ 0.000000] OF: reserved mem: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory
[ 0.000000] cma: Reserved 64 MiB at 0xfb800000
[ 0.000000] On node 0 totalpages: 524031
[ 0.000000] free_area_init_node: node 0, pgdat c12ba380, node_mem_map df5f8000
[ 0.000000] Normal zone: 1170 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 133120 pages, LIFO batch:31
[ 0.000000] HighMem zone: 390911 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 16 pages/cpu s35212 r8192 d22132 u65536
[ 0.000000] pcpu-alloc: s35212 r8192 d22132 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522861
[ 0.000000] Kernel command line: board=bpi-r2 earlyprintk console=tty1 fbcon=map:0 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait vmalloc=496M debug=7 initcall_debug=0 video=1920x1080 drm.d7
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 1992308K/2096124K available (11264K kernel code, 959K rwdata, 3484K rodata, 1024K init, 608K bss, 38280K reserved, 65536K cma-reserved, 1498108K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe1000000 - 0xff800000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c00000 (12256 kB)
[ 0.000000] .init : 0xc1100000 - 0xc1200000 (1024 kB)
[ 0.000000] .data : 0xc1200000 - 0xc12efcf0 ( 960 kB)
[ 0.000000] .bss : 0xc12f82e4 - 0xc1390560 ( 609 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 36498 entries in 108 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU event tracing is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000006] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.000017] Switching to timer-based delay loop, resolution 76ns
[ 0.000196] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns
[ 0.000213] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 165191050201ns
[ 0.000724] Console: colour dummy device 80x30
[ 0.001243] console [tty1] enabled
[ 0.001280] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.001308] pid_max: default: 32768 minimum: 301
[ 0.001471] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001495] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002190] CPU: Testing write buffer coherency: ok
[ 0.002553] CPU0: update cpu_capacity 1024
[ 0.002579] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003010] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.003161] Hierarchical SRCU implementation.
[ 0.008895] smp: Bringing up secondary CPUs ...
[ 0.009435] CPU1: update cpu_capacity 1024
[ 0.009442] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.010137] CPU2: update cpu_capacity 1024
[ 0.010144] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010725] CPU3: update cpu_capacity 1024
[ 0.010731] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.010834] smp: Brought up 1 node, 4 CPUs
[ 0.010920] SMP: Total of 4 processors activated (104.00 BogoMIPS).
[ 0.010934] CPU: All CPU(s) started in SVC mode.
[ 0.011996] devtmpfs: initialized
[ 0.018823] random: get_random_u32 called from bucket_table_alloc+0x6c/0x1b0 with crng_init=0
[ 0.019408] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 0.019720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019758] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.022489] xor: measuring software checksum speed
[ 0.120004] arm4regs : 1288.800 MB/sec
[ 0.220070] 8regs : 897.600 MB/sec
[ 0.320144] 32regs : 871.600 MB/sec
[ 0.420213] neon : 1301.600 MB/sec
[ 0.420229] xor: using function: neon (1301.600 MB/sec)
[ 0.420332] pinctrl core: initialized pinctrl subsystem
[ 0.421088] NET: Registered protocol family 16
[ 0.422854] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.424082] No ATAGs?
[ 0.424235] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.424272] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.483165] gpiochip_find_base: found new base at 232
[ 0.483433] gpio gpiochip0: (1000b000.pinctrl): added GPIO chardev (254:0)
[ 0.483543] gpiochip_setup_dev: registered GPIOs 232 to 511 on device: gpiochip0 (1000b000.pinctrl)
[ 0.483575] gpio gpiochip0: (1000b000.pinctrl): created GPIO range 0->279 ==> 1000b000.pinctrl PIN 0->279
[ 0.680589] raid6: int32x1 gen() 182 MB/s
[ 0.850690] raid6: int32x1 xor() 167 MB/s
[ 1.020879] raid6: int32x2 gen() 219 MB/s
[ 1.190978] raid6: int32x2 xor() 178 MB/s
[ 1.361263] raid6: int32x4 gen() 211 MB/s
[ 1.531182] raid6: int32x4 xor() 176 MB/s
[ 1.701308] raid6: int32x8 gen() 214 MB/s
[ 1.871411] raid6: int32x8 xor() 148 MB/s
[ 2.041580] raid6: neonx1 gen() 510 MB/s
[ 2.211642] raid6: neonx1 xor() 483 MB/s
[ 2.381762] raid6: neonx2 gen() 658 MB/s
[ 2.551865] raid6: neonx2 xor() 593 MB/s
[ 2.722042] raid6: neonx4 gen() 767 MB/s
[ 2.892109] raid6: neonx4 xor() 650 MB/s
[ 3.062254] raid6: neonx8 gen() 708 MB/s
[ 3.232360] raid6: neonx8 xor() 587 MB/s
[ 3.232377] raid6: using algorithm neonx4 gen() 767 MB/s
[ 3.232390] raid6: .... xor() 650 MB/s, rmw enabled
[ 3.232403] raid6: using neon recovery algorithm
[ 3.232898] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3p3v[0]'
[ 3.233192] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-5v[0]'
[ 3.233447] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator@0[0]'
[ 3.234192] iommu: Adding device 14007000.ovl to group 0
[ 3.237275] iommu: Adding device 14008000.rdma to group 1
[ 3.237350] iommu: Adding device 14009000.wdma to group 2
[ 3.237415] iommu: Adding device 14012000.rdma to group 3
[ 3.237486] iommu: Adding device 15004000.jpegdec to group 4
[ 3.237957] vgaarb: loaded
[ 3.238364] SCSI subsystem initialized
[ 3.238614] libata version 3.00 loaded.
[ 3.238857] usbcore: registered new interface driver usbfs
[ 3.238914] usbcore: registered new interface driver hub
[ 3.239000] usbcore: registered new device driver usb
[ 3.239492] Advanced Linux Sound Architecture Driver Initialized.
[ 3.240059] Bluetooth: Core ver 2.22
[ 3.240124] NET: Registered protocol family 31
[ 3.240141] Bluetooth: HCI device and connection manager initialized
[ 3.240163] Bluetooth: HCI socket layer initialized
[ 3.240180] Bluetooth: L2CAP socket layer initialized
[ 3.240217] Bluetooth: SCO socket layer initialized
[ 3.241361] clocksource: Switched to clocksource arch_sys_counter
[ 3.318604] NET: Registered protocol family 2
[ 3.319221] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 3.319287] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.319356] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.319479] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.319521] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.319711] NET: Registered protocol family 1
[ 3.320208] RPC: Registered named UNIX socket transport module.
[ 3.320237] RPC: Registered udp transport module.
[ 3.320250] RPC: Registered tcp transport module.
[ 3.320263] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.320284] PCI: CLS 0 bytes, default 64
[ 3.322819] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 3.329109] NFS: Registering the id_resolver key type
[ 3.329164] Key type id_resolver registered
[ 3.329179] Key type id_legacy registered
[ 3.329202] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.329445] fuse init (API version 7.26)
[ 3.334745] NET: Registered protocol family 38
[ 3.334884] async_tx: api initialized (async)
[ 3.334968] bounce: pool size: 64 pages
[ 3.335053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.335077] io scheduler noop registered
[ 3.335090] io scheduler deadline registered
[ 3.335273] io scheduler cfq registered (default)
[ 3.335294] io scheduler mq-deadline registered
[ 3.335308] io scheduler kyber registered
[ 3.398842] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.400632] console [ttyS0] disabled
[ 3.420833] 11004000.serial: ttyS0 at MMIO 0x11004000 (irq = 197, base_baud = 1625000) is a ST16650V2
[ 4.341198] console [ttyS0] enabled
[ 4.365780] 11002000.serial: ttyS1 at MMIO 0x11002000 (irq = 198, base_baud = 1625000) is a ST16650V2
[ 4.396008] 11003000.serial: ttyS2 at MMIO 0x11003000 (irq = 199, base_baud = 1625000) is a ST16650V2
[ 4.426256] 11005000.serial: ttyS3 at MMIO 0x11005000 (irq = 200, base_baud = 1625000) is a ST16650V2
[ 4.436640] mtk_rng 1020f000.rng: registered RNG driver
[ 4.436792] random: fast init done
[ 4.442169] [drm:drm_core_init] Initialized
[ 4.445446] random: crng init done
[ 4.451493] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000
[ 4.460686] mediatek-drm 14000000.dispsys: Adding component match for /ovl@14007000
[ 4.468385] mediatek-drm 14000000.dispsys: Adding component match for /rdma@14008000
[ 4.476215] mediatek-drm 14000000.dispsys: Adding component match for /color@1400b000
[ 4.484097] mediatek-drm 14000000.dispsys: Adding component match for /rdma@14012000
[ 4.491831] mediatek-drm 14000000.dispsys: Adding component match for /dpi@14014000
[ 4.500593] ref_clk_name:hdmi_ref
[ 4.504057] mediatek-hdmi-phy 10209100.phy: Using default TX DRV impedance: 4.2k/36
[ 4.513451] [drm] hdmi-audio-codec driver bound to HDMI
[ 4.526770] loop: module loaded
[ 4.530083] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success
[ 4.537960] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0
[ 4.544920] MTK-BTIF[E]hal_btif_clk_get_and_prepare(286):[CCF]clk_btif=def91ac0
[ 4.552229] MTK-BTIF[E]hal_btif_clk_get_and_prepare(292):[CCF]clk_btif_apdma=def91b00
[ 4.562063] mt6323-regulator mt6323-regulator: Chip ID = 0x2023
[ 4.576313] Uniform Multi-Platform E-IDE driver
[ 4.580889] ide-gd driver 1.18
[ 4.584505] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 4.590135] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 4.596228] mdio_bus fixed-0: lookup for GPIO reset failed
[ 4.601710] libphy: Fixed MDIO Bus: probed
[ 4.606253] mt7530 switch@0: GPIO lookup for consumer reset
[ 4.611836] mt7530 switch@0: using device tree for GPIO lookup
[ 4.617647] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/switch@0[0]' - status (0)
[ 4.650301] mtk_soc_eth 1b100000.ethernet: chip id = 7623
[ 4.655947] mdio_bus mdio-bus: GPIO lookup for consumer reset
[ 4.661694] mdio_bus mdio-bus: using device tree for GPIO lookup
[ 4.667669] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ethernet@1b100000/mdio-bus[0]'
[ 4.677879] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ethernet@1b100000/mdio-bus[0]'
[ 4.688000] mdio_bus mdio-bus: using lookup tables for GPIO lookup
[ 4.694151] mdio_bus mdio-bus: lookup for GPIO reset failed
[ 4.699685] libphy: mdio: probed
[ 4.702904] drivers/net/ethernet/mediatek/mtk_eth_soc.c:mtk_mdio_init[427]0 dd8b8000
[ 4.710629] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mac@0/fixed-link[0]'
[ 4.722066] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 4.732844] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xe14c0000, irq 225
[ 4.741272] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/ethernet@1b100000/mac@1/fixed-link[0]'
[ 4.752561] mtk_soc_eth 1b100000.ethernet: connected mac 1 to PHY at fixed-0:01 [uid=00000000, driver=Generic PHY]
[ 4.763311] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xe14c0000, irq 225
[ 4.772728] xhci-mtk 1a1c0000.usb: xHCI Host Controller
[ 4.777952] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 1
[ 4.785999] xhci-mtk 1a1c0000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 4.795115] xhci-mtk 1a1c0000.usb: irq 223, io mem 0x1a1c0000
[ 4.801759] hub 1-0:1.0: USB hub found
[ 4.805542] hub 1-0:1.0: 1 port detected
[ 4.809833] xhci-mtk 1a1c0000.usb: xHCI Host Controller
[ 4.815084] xhci-mtk 1a1c0000.usb: new USB bus registered, assigned bus number 2
[ 4.822463] xhci-mtk 1a1c0000.usb: Host supports USB 3.0 SuperSpeed
[ 4.828876] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.837675] hub 2-0:1.0: USB hub found
[ 4.841485] hub 2-0:1.0: 1 port detected
[ 4.846393] xhci-mtk 1a240000.usb: xHCI Host Controller
[ 4.851652] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 3
[ 4.859531] xhci-mtk 1a240000.usb: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 4.868619] xhci-mtk 1a240000.usb: irq 224, io mem 0x1a240000
[ 4.875199] hub 3-0:1.0: USB hub found
[ 4.878992] hub 3-0:1.0: 1 port detected
[ 4.883346] xhci-mtk 1a240000.usb: xHCI Host Controller
[ 4.888555] xhci-mtk 1a240000.usb: new USB bus registered, assigned bus number 4
[ 4.895939] xhci-mtk 1a240000.usb: Host supports USB 3.0 SuperSpeed
[ 4.902360] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.911106] hub 4-0:1.0: USB hub found
[ 4.915027] hub 4-0:1.0: 1 port detected
[ 4.919581] usbcore: registered new interface driver usb-storage
[ 4.925701] usbcore: registered new interface driver usbserial
[ 4.931863] mousedev: PS/2 mouse device common for all mice
[ 4.939385] IR NEC protocol handler initialized
[ 4.943944] IR RC5(x/sz) protocol handler initialized
[ 4.948962] IR RC6 protocol handler initialized
[ 4.953485] IR JVC protocol handler initialized
[ 4.957984] IR Sony protocol handler initialized
[ 4.962579] IR SANYO protocol handler initialized
[ 4.967249] IR Sharp protocol handler initialized
[ 4.971929] IR MCE Keyboard/mouse protocol handler initialized
[ 4.977720] IR XMP protocol handler initialized
[ 4.982793] Registered IR keymap rc-empty
[ 4.986899] rc rc0: mtk_cir as /devices/platform/10013000.cir/rc/rc0
[ 4.993416] input: mtk_cir as /devices/platform/10013000.cir/rc/rc0/input0
[ 5.000808] input: MCE IR Keyboard/Mouse (mtk_cir) as /devices/virtual/input/input1
[ 5.009041] mtk_cir 10013000.cir: Initialized MT7623 IR driver, sample period = 46us
[ 5.017580] MTK_WDT_NONRST_REG(0)
[ 5.021646] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 5.031252] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 5.040034] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 5.046553] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 5.053157] device-mapper: multipath service-time: version 0.3.0 loaded
[ 5.059795] device-mapper: raid: Loading target version 1.13.0
[ 5.066124] cpu cpu0: dummy supplies not allowed for exclusive requests
[ 5.074485] mtk-msdc 11240000.mmc: GPIO lookup for consumer cd
[ 5.080294] mtk-msdc 11240000.mmc: using device tree for GPIO lookup
[ 5.086669] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/mmc@11240000[0]' - status (0)
[ 5.096135] mtk-msdc 11240000.mmc: Got CD GPIO
[ 5.100552] mtk-msdc 11240000.mmc: GPIO lookup for consumer wp
[ 5.106381] mtk-msdc 11240000.mmc: using device tree for GPIO lookup
[ 5.112722] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@11240000[0]'
[ 5.121476] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@11240000[0]'
[ 5.130118] mtk-msdc 11240000.mmc: using lookup tables for GPIO lookup
[ 5.136619] mtk-msdc 11240000.mmc: lookup for GPIO wp failed
[ 5.202443] mtk-msdc 11230000.mmc: GPIO lookup for consumer wp
[ 5.208252] mtk-msdc 11230000.mmc: using device tree for GPIO lookup
[ 5.214623] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/mmc@11230000[0]'
[ 5.223373] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/mmc@11230000[0]'
[ 5.232030] mtk-msdc 11230000.mmc: using lookup tables for GPIO lookup
[ 5.238515] mtk-msdc 11230000.mmc: lookup for GPIO wp failed
[ 5.251411] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[ 5.298315] mmc0: host does not support reading read-only switch, assuming write-enable
[ 5.307044] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/green[0]' - status (0)
[ 5.316120] no flags found for gpios
[ 5.319819] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/blue[0]' - status (0)
[ 5.328767] no flags found for gpios
[ 5.332446] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/red[0]' - status (0)
[ 5.341275] no flags found for gpios
[ 5.345785] mmc0: new high speed SDXC card at address 0001
[ 5.349908] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.356823] usbcore: registered new interface driver usbhid
[ 5.356967] mmcblk0: mmc0:0001 EC2QT 59.6 GiB
[ 5.362386] usbhid: USB HID core driver
[ 5.363679] mtk-iommu-v1 10205000.mmsys_iommu: bound 14010000.larb (ops mtk_smi_larb_component_ops)
[ 5.368178] mmcblk0: p1 p2
[ 5.370650] mtk-iommu-v1 10205000.mmsys_iommu: bound 16010000.larb (ops mtk_smi_larb_component_ops)
[ 5.370661] mtk-iommu-v1 10205000.mmsys_iommu: bound 15001000.larb (ops mtk_smi_larb_component_ops)
[ 5.402229] NET: Registered protocol family 10
[ 5.407859] Segment Routing with IPv6
[ 5.411604] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.418092] NET: Registered protocol family 17
[ 5.422616] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 5.426583] mmc1: new high speed MMC card at address 0001
[ 5.441634] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
[ 5.442648] NET: Registered protocol family 41
[ 5.446592] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
[ 5.450690] 8021q: 802.1Q VLAN Support v1.8
[ 5.456881] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
[ 5.461189] ThumbEE CPU extension supported.
[ 5.470877] Registering SWP/SWPB emulation handler
[ 5.471487] mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB, chardev (247:0)
[ 5.590761] mtk-pcie 1a140000.pcie-controller: Port0 link down
[ 5.627093] mtk-pcie 1a140000.pcie-controller: PCI host bridge to bus 0000:00
[ 5.634230] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff])
[ 5.643666] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 5.650498] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 5.655994] pci 0000:00:01.0: [14c3:0801] type 01 class 0x060400
[ 5.662005] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[ 5.668284] pci 0000:00:01.0: supports D1
[ 5.672286] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 5.678220] PCI: bus0: Fast back to back transfers disabled
[ 5.683788] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 5.691904] pci 0000:01:00.0: [1b21:0611] type 00 class 0x010185
[ 5.697899] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 5.704924] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
[ 5.710294] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
[ 5.717308] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
[ 5.722691] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[ 5.729692] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
[ 5.735074] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
[ 5.742087] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
[ 5.747457] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[ 5.754469] pci 0000:01:00.0: reg 0x20: [io size 0x0010]
[ 5.759840] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
[ 5.766087] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 5.801410] PCI: bus1: Fast back to back transfers disabled
[ 5.806956] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 5.813579] pci 0000:00:01.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 5.820326] pci 0000:00:01.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[ 5.827518] pci 0000:00:01.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[ 5.834278] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 5.840338] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
[ 5.847529] pci 0000:01:00.0: BAR 5: assigned [mem 0x60000000-0x600001ff]
[ 5.854290] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x100f]
[ 5.860346] pci 0000:01:00.0: BAR 0: assigned [io 0x1010-0x1017]
[ 5.866416] pci 0000:01:00.0: BAR 2: assigned [io 0x1018-0x101f]
[ 5.872485] pci 0000:01:00.0: BAR 1: assigned [io 0x1020-0x1023]
[ 5.878542] pci 0000:01:00.0: BAR 3: assigned [io 0x1024-0x1027]
[ 5.884612] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 5.889544] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 5.895611] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff]
[ 5.902368] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff pref]
[ 5.909717] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[ 5.915988] pcieport 0000:00:01.0: Signaling PME with IRQ 221
[ 5.922122] ahci 0000:01:00.0: version 3.0
[ 5.926210] ahci 0000:01:00.0: enabling device (0140 -> 0143)
[ 5.932055] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
[ 5.938674] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[ 5.946656] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 5.956646] scsi host0: ahci
[ 5.959983] scsi host1: ahci
[ 5.963117] ata1: SATA max UDMA/133 abar m512@0x60000000 port 0x60000100 irq 221
[ 5.970469] ata2: SATA max UDMA/133 abar m512@0x60000000 port 0x60000180 irq 221
[ 5.978269] mediatek-dpi 14014000.dpi: Found bridge node: /hdmi@14015000
[ 5.985229] mediatek-drm 14000000.dispsys: bound 14007000.ovl (ops mtk_disp_ovl_component_ops)
[ 5.993835] mediatek-drm 14000000.dispsys: bound 14008000.rdma (ops mtk_disp_rdma_component_ops)
[ 6.002591] mediatek-drm 14000000.dispsys: bound 1400b000.color (ops mtk_disp_color_component_ops)
[ 6.011511] mediatek-drm 14000000.dispsys: bound 14012000.rdma (ops mtk_disp_rdma_component_ops)
[ 6.020272] [drm:drm_connector_init] cmdline mode for connector HDMI-A-1 1920x1080@60Hz
[ 6.028248] mediatek-drm 14000000.dispsys: bound 14014000.dpi (ops mtk_dpi_component_ops)
[ 6.036492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.043082] [drm] No driver support for vblank timestamp query.
[ 6.048970] [drm:drm_mode_object_put] OBJ ID: 28 (2)
[ 6.053925] [drm:drm_mode_object_put] OBJ ID: 28 (2)
[ 6.058865] [drm:drm_mode_object_get] OBJ ID: 28 (2)
[ 6.063825] [drm:drm_mode_object_put] OBJ ID: 28 (3)
[ 6.068758] [drm:drm_setup_crtcs]
[ 6.072157] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:HDMI-A-1]
[ 6.079598] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:HDMI-A-1] status updated from unknown to disconnected
[ 6.090843] [drm:drm_mode_object_put] OBJ ID: 28 (3)
[ 6.095789] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:28:HDMI-A-1] disconnected
[ 6.104361] [drm:drm_setup_crtcs] No connectors reported connected with modes
[ 6.111461] [drm:drm_setup_crtcs] connector 28 enabled? no
[ 6.116912] [drm:drm_setup_crtcs] picking CRTCs for 4096x4096 config
[ 6.123236] [drm] Cannot find any crtc or sizes
[ 6.127769] [drm:drm_mode_object_put] OBJ ID: 28 (3)
[ 6.132724] [drm:drm_mode_object_put] OBJ ID: 28 (3)
[ 6.137701] [drm:drm_minor_register]
[ 6.141359] [drm:drm_minor_register]
[ 6.144997] [drm:drm_minor_register]
[ 6.148859] [drm:drm_mode_object_put] OBJ ID: 28 (3)
[ 6.153846] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 6.160049] [drm:drm_minor_register] new minor registered 0
[ 6.165736] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
[ 6.172077] [drm:drm_sysfs_hotplug_event] generating hotplug event
[ 6.178260] [drm:drm_mode_object_put] OBJ ID: 28 (3)
[ 6.183211] [drm] Initialized mediatek 1.0.0 20150513 for 14000000.dispsys on minor 0
[ 6.191369] mt7530 switch@0: GPIO lookup for consumer reset
[ 6.196915] mt7530 switch@0: using device tree for GPIO lookup
[ 6.202739] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/switch@0[0]' - status (0)
[ 6.212269] DSA: switch 0 0 parsed
[ 6.215674] DSA: tree 0 parsed
[ 6.225897] mdio_bus dsa-0.0: GPIO lookup for consumer reset
[ 6.231560] mdio_bus dsa-0.0: using lookup tables for GPIO lookup
[ 6.237615] mdio_bus dsa-0.0: lookup for GPIO reset failed
[ 6.244979] libphy: dsa slave smi: probed
[ 6.249216] Generic PHY dsa-0.0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:00, irq=POLL)
[ 6.259953] Generic PHY dsa-0.0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:01, irq=POLL)
[ 6.270627] Generic PHY dsa-0.0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:02, irq=POLL)
[ 6.281286] Generic PHY dsa-0.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:03, irq=POLL)
[ 6.291968] Generic PHY dsa-0.0:04: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:04, irq=POLL)
[ 6.302467] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/switch@0/ports/port@5/fixed-link[0]'
[ 6.302909] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.315730] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/switch@0/ports/port@6/fixed-link[0]'
[ 6.332069] hctosys: unable to open rtc device (rtc0)
[ 6.337327] clk: Not disabling unused clocks
[ 6.341621] vdd_fixed_vgpu: disabling
[ 6.345289] vusb: disabling
[ 6.348071] vmc: disabling
[ 6.350765] vgp1: disabling
[ 6.353581] vcamaf: disabling
[ 6.356548] ALSA device list:
[ 6.359490] No soundcards found.
[ 6.811388] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.817885] ata2.00: supports DRM functions and may not be fully accessible
[ 6.825737] ata2.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT03B6Q, max UDMA/133
[ 6.832933] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 6.842442] ata2.00: supports DRM functions and may not be fully accessible
[ 6.852293] ata2.00: configured for UDMA/133
[ 6.857118] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 3B6Q PQ: 0 ANSI: 5
[ 6.865945] ata2.00: Enabling discard_zeroes_data
[ 6.871130] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 6.878711] sd 1:0:0:0: [sda] Write Protect is off
[ 6.883502] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.888637] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.898299] ata2.00: Enabling discard_zeroes_data
[ 6.904055] sda: sda1 sda2 sda3
[ 6.908266] ata2.00: Enabling discard_zeroes_data
[ 6.913720] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.918417] md: Waiting for all devices to be available before autodetect
[ 6.925186] md: If you don't use raid, use raid=noautodetect
[ 6.931502] md: Autodetecting RAID arrays.
[ 6.935580] md: autorun ...
[ 6.938350] md: ... autorun DONE.
[ 6.953123] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 6.960627] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 6.975298] devtmpfs: mounted
[ 6.980374] Freeing unused kernel memory: 1024K
[ 7.382886] systemd[1]: System time before build time, advancing clock.
[ 7.476690] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.511163] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 7.529915] systemd[1]: Detected architecture arm.
[ 7.582717] systemd[1]: Set hostname to <bpi-r2>.
[ 8.059622] systemd[1]: Created slice System Slice.
[ 8.094189] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 8.131817] systemd[1]: Listening on Syslog Socket.
[ 8.165980] systemd[1]: Mounting Debug File System...
[ 8.201899] systemd[1]: Listening on udev Control Socket.
[ 8.241945] systemd[1]: Listening on Journal Socket.
[ 8.295358] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.371476] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[ 8.407807] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.560036] systemd-journald[166]: Received request to flush runtime journal from PID 1
[ 9.995332] mt6397-rtc mt6323-rtc: registered as rtc0
[ 10.009062] evbug: Connected device: input0 (mtk_cir at mtk_cir/input0)
[ 10.015797] evbug: Connected device: input1 (MCE IR Keyboard/Mouse (mtk_cir) at /input0)
[ 10.095467] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values
[ 11.362397] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.375470] Adding 2097148k swap on /dev/sda1. Priority:-2 extents:1 across:2097148k SS
[ 11.480451] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.590292] IPv6: ADDRCONF(NETDEV_UP): wan: link is not ready
[ 12.959897] [WMT-DETECT][I]wmt_detect_open:open major 154 minor 0 (pid 404)
[ 12.967004] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191037),arg(0)
[ 12.974236] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (1074034433),arg(30243)
[ 12.981660] set current consys chipid (0x7623)
[ 12.986098] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191036),arg(30243)
[ 12.993607] [WMT-MOD-INIT][I]do_common_drv_init:start to do common driver init, chipid:0x00007623
[ 13.083538] [WMT-CONF][E]wmt_conf_parse_pair(323):unknown field 'mt6620.defAnt'.
[ 13.090908] [WMT-CONF][E]wmt_conf_parse_pair(323):unknown field 'mt6628.defAnt'.
[ 13.098368] [WMT-CONF][E]wmt_conf_parse_pair(323):unknown field 'mt6630.defAnt'.
[ 13.108468] [WMT-CONSYS-HW][E]mtk_wmt_probe(122):Wmt Cannot find pinctrl default!
[ 13.118143] [WMT-MOD-INIT][I]do_common_drv_init:finish common driver init
[ 13.124997] [WCN-MOD-INIT][E]do_connectivity_driver_init(57):do common driver init failed, ret:-1
[ 13.133968] [GPS-MOD-INIT][I]do_gps_drv_init:CONFIG_MTK_COMBO_GPS is not defined
[ 13.133980] [WCN-MOD-INIT][E]do_connectivity_driver_init(62):do common driver init failed, ret:-1
[ 13.133983] [FM-MOD-INIT][I]do_fm_drv_init:start to do fm module init
[ 13.133986] [FM-MOD-INIT][I]do_fm_drv_init:finish fm module init
[ 13.133990] [WLAN-MOD-INIT][I]do_wlan_drv_init:start to do wlan module init 0x7623
[ 13.134353] [MTK-WIFI] WIFI_init: mtk_wmt_WIFI_chrdev driver(major 155) installed.
[ 13.179421] [WLAN-MOD-INIT][I]do_wlan_drv_init:WMT-WIFI char dev init, ret:0
[ 13.189148] [WLAN-MOD-INIT][I]do_wlan_drv_init:WLAN-GEN2 driver init, ret:0
[ 13.196246] [WLAN-MOD-INIT][I]do_wlan_drv_init:finish wlan module init
[ 13.203428] [WMT-DETECT][I]wmt_detect_close:close major 154 minor 0 (pid 404)
[ 13.601722] mt7530 switch@0 wan: Link is Down
[ 16.721667] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[ 16.728148] mt7530 switch@0 wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 17.282565] [WMT-CORE][E]opfunc_hif_conf(874):WMT-CORE: WMT HIF info added
[ 17.289431] vcn18: mode operation not allowed
[ 17.295460] [WMT-CONSYS-HW][E]mtk_wcn_consys_hw_reg_ctrl(301):Read CONSYS chipId(0xfffff093)
[ 17.391718] [WMT-CONF][E]wmt_conf_parse_pair(323):unknown field 'mt6620.defAnt'.
[ 17.407520] [WMT-CONF][E]wmt_conf_parse_pair(323):unknown field 'mt6628.defAnt'.
[ 17.414927] [WMT-CONF][E]wmt_conf_parse_pair(323):unknown field 'mt6630.defAnt'.
[ 17.980453] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
[ 21.288417] [MTK-WIFI] WIFI_open: WIFI_open: major 155 minor 0 (pid 442)
[ 21.301562] [MTK-WIFI] WIFI_write: WIFI_write 1
[ 21.344866] kalFirmwareImageMapping firmware size 225840
[ 22.404517] [MTK-WIFI] register_set_p2p_mode_handler: (pid 409) register set p2p mode handler c065ecc0
[ 22.414044] [MTK-WIFI] WIFI_write: WMT turn on WIFI success!
[ 22.419737] [MTK-WIFI] WIFI_close: WIFI_close: major 155 minor 0 (pid 442)
[ 22.731478] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 83.485305] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 85.773975] Bridge firewalling registered
[ 85.975144] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 86.807289] Netfilter messages via NETLINK v0.30.
[ 86.833625] ctnetlink v0.93: registering with nfnetlink.
[ 87.614563] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment