A rebuild script that commits on a successful build

configuration.nix

{
  config,
  pkgs,
  options,
  ...
}: let
  hostname = "oatman-pc"; # to alllow per-machine config
in {
  networking.hostName = hostname;

  imports = [
    /etc/nixos/hardware-configuration.nix
    (/home/oatman/dotfiles/nixos + "/${hostname}.nix")
  ];
}

nixos-rebuild.sh

#!/usr/bin/env bash
#
# I believe there are a few ways to do this:
#
#    1. My current way, using a minimal /etc/nixos/configuration.nix that just imports my config from my home directory (see it in the gist)
#    2. Symlinking to your own configuration.nix in your home directory (I think I tried and abandoned this and links made relative paths weird)
#    3. My new favourite way: as @clot27 says, you can provide nixos-rebuild with a path to the config, allowing it to be entirely inside your dotfies, with zero bootstrapping of files required.
#       `nixos-rebuild switch -I nixos-config=path/to/configuration.nix`
#    4. If you uses a flake as your primary config, you can specify a path to `configuration.nix` in it and then `nixos-rebuild switch —flake` path/to/directory
# As I hope was clear from the video, I am new to nixos, and there may be other, better, options, in which case I'd love to know them! (I'll update the gist if so)

# A rebuild script that commits on a successful build
set -e

# Edit your config
$EDITOR configuration.nix

# cd to your config dir
pushd ~/dotfiles/nixos/

# Early return if no changes were detected (thanks @singiamtel!)
if git diff --quiet '*.nix'; then
    echo "No changes detected, exiting."
    popd
    exit 0
fi

# Autoformat your nix files
alejandra . &>/dev/null \
  || ( alejandra . ; echo "formatting failed!" && exit 1)

# Shows your changes
git diff -U0 '*.nix'

echo "NixOS Rebuilding..."

# Rebuild, output simplified errors, log trackebacks
sudo nixos-rebuild switch &>nixos-switch.log || (cat nixos-switch.log | grep --color error && exit 1)

# Get current generation metadata
current=$(nixos-rebuild list-generations | grep current)

# Commit all changes witih the generation metadata
git commit -am "$current"

# Back to where you were
popd

# Notify all OK!
notify-send -e "NixOS Rebuilt OK!" --icon=software-update-available

@0atman You can create a systemd service with nixos that does it automagically

systemd.services.bleeding_edger = {
  enable = true;
  path = [ pkgs.nix ];
  serviceConfig = {
     ExecStart = "nix flake update";
   }
}

Extra help: https://discourse.nixos.org/t/creating-a-systemd-service-that-runs-a-nix-command/38437

I always thought that --update-input flag in system.autoUpgrade basically does nix flake update before schedules update. At least wiki says that it's enough for flake system to get autoupdates: https://nixos.wiki/wiki/Automatic_system_upgrades

Very good point. I could perhaps run that on a cron?

In my system nix flake update command requires sudo, I'm pretty sure this wasn't always the case though.

I did indeed trynixvim for a while, but lazynvim is turnkey, so I'm simply using that. Home Assistant is fine, but I don't think it makes sense for my low-stress life.

I also experienced the issue of not being able to set things too easily when using home-manager. So I use home-manager to set things like setting universal colorscheme with stylix, and configurations that I don't always mess with, I'm confident I want them in a certain way.

I used to configure my browser with Nix too but I stopped doing that since it was a pain Nix overwriting some of the things I changed between rebuilds every time. Stow is an amazing tool for your use-case though. I feel bad I didn't knew it i before i spent many months running mostly Arch.

so many tools assume you've got a flakes system

A wise man once told "Popularity Matters" in his "The Unreasonable Effectiveness Of Plain Text" video . Flakes, let alone still being labeled as a experimental feature, as far as i know 40% of Nix users use it. Probably has a higher margin on desktop usage.

New functionality implemented: instead of hiding the output of the rebuild script (creating anti-climatic moments) what about using the alternative screen buffer? So when the program is done all the logs go away and you're left with a pleasant 'Rebuild Completed' or not so pleasant 'Rebuild failed'

Final output

 /.dotfiles/nixos $ rebuild-system
Hostname not passed, defaulting to #acer
Analysing changes... Not found
Rebuilding NixOS... Done

[sudo] password for justcode:
NixOS Rebuild Completed!

 /.dotfiles/nixos $

Here the escape codes to enter alt screen buffer

# Enter alt-buff and clear screen
echo -ne "\033[?1049h\033[H"

# Exit alt-buff
echo -ne "\033[?1049l"

And here's the snippet that I use

# Rebuild system
echo -n "Rebuilding NixOS... "
echo -ne "\033[?1049h\033[H" # enter alt-buff and clear
echo "Rebuilding NixOS..."

set +o pipefail # Disable pipafail since we check ourselves
# shellcheck disable=SC2024 #ah the irony
sudo nixos-rebuild switch --show-trace --flake ".#${HOST_SHELL}" 2>&1 | tee .nixos-switch.log
exit_code="${PIPESTATUS[0]}"
set -o pipefail # Re-enable pipefail

# Wait a bit before exiting buffer
echo  -e "\n\033[34mNixOS rebuild completed\033[0m (code: $exit_code)"
echo -ne "\rExit in 3" && sleep 1
echo -ne "\rExit in 2" && sleep 1
echo -ne "\rExit in 1" && sleep 1
echo -ne "\033[?1049l" # exit alt-buff

# Check exit code of nixos-rebuild and act accordingly
if [[ "${exit_code}" == 0 ]]; then
	echo -e "Done\n"
...

Holy carp, that's some deep magic there, thank you! Will experiment

@0atman You can test the full version of the script by taking it from my dotfiles. This way you can get a feel if you like it or not [link]

let me know ;)

edit: You might want to disable certain stuff like the automatic host recognition, the flake auto-update (based on the current host), the auto-restore (so that it can properly detect if it's rebuilding with changes after a failed attempt) and the auto-commit (for obvious reasons)

Thank you! Hopefully useful for others too!

I found out something very useful

You can unlink nixos files without extra permissions and on the next rebuild they will get recreated

This means that when you want to quickly iterate over a configuration (waybar for example) you can remove the nixos link, point it to your configuration folder, modify it and test things out without having to rebuild

When you're done just rebuild and nixos will bake the new config into the next generation

Isn't the current autoformatting command forgetting to popd on formatting failure?

@S1rDev10us huh, I don't think pushd/popd work in the way I (or maybe you!) think. Perhaps someone smarter than I can explain what happens to the directory stack on an early exit?

A script I just tried that surprised me:

#!/usr/bin/env bash
set -e
pushd ~/Music
pwd
exit 1
# after exit, cwd is back where we started, despite not popd-ing

@0atman As far I know pushd and popd act only inside of the shell that get's created when you execute the script, like if you had two terminals and you changed directory in one of them. Once the script has terminated it exits to the "outer shell" (bash or zsh) and resume the previous environment

oh of course! it's running in the shebang's process, not hijacking the outer shell 😅

I have a laptop with only two cores and - since everytime I started a rebuild it would freeze my desktop - I implemented the simplest throttling mechanism to tell nixos-rebuild to use only half of the available cores (snippet below)

# Detect processors
procs="$(nproc)"
if [ -z "${procs:-}" ]; then
	echo "No processors detected! Assuming 2..."
	procs="2"
fi

hprocs="$(( procs / 2 ))"
echo "Detected ${procs} processors, using ${hprocs} of them"

nixos-rebuild switch --max-jobs "${hprocs}" #...