| // I'm tired of extensions that automatically: | |
| // - show welcome pages / walkthroughs | |
| // - show release notes | |
| // - send telemetry | |
| // - recommend things | |
| // | |
| // This disables all of that stuff. | |
| // If you have more config, leave a comment so I can add it!! | |
| { |
Mikrot IP: 192.168.88.1/24 DHCP network: 0
/tool fetch url="https://boot.netboot.xyz/ipxe/netboot.xyz.kpxe"
/ip tftp add ip-addresses=192.168.88.0/24 req-filename=netboot.xyz.kpxe real-filename=netboot.xyz.kpxe allow=yes read-only=yes
/ip dhcp-server network set 0 next-server=192.168.88.1 boot-file-name=netboot.xyz.kpxe
Internet connection and DNS routing are broken from WSL2 instances, when some VPNs are active.
The root cause seems to be that WSL2 and the VPN use the same IP address block, and the VPN routing clobbers WSL2's network routing.
This problem is tracked in multiple microsoft/WSL issues including, but not limited to:
This is a companion piece to my instructions on building TensorFlow from source. In particular, the aim is to install the following pieces of software
on an Ubuntu Linux system, in particular Ubuntu 20.04.
| #!/bin/bash | |
| set +x | |
| PY_VERSION=3.10.1 | |
| export MAKE_OPTS="-j4" | |
| export PYTHON_CONFIGURE_OPTS="$PYTHON_CONFIGURE_OPTS --enable-framework" | |
| export PYTHON_CONFIGURE_OPTS="$PYTHON_CONFIGURE_OPTS --with-computed-gotos" | |
| export PYTHON_CONFIGURE_OPTS="$PYTHON_CONFIGURE_OPTS --with-system-expat" |
⚠️ Note 2023-01-21
Some things have changed since I originally wrote this in 2016. I have updated a few minor details, and the advice is still broadly the same, but there are some new Cloudflare features you can (and should) take advantage of. In particular, pay attention to Trevor Stevens' comment here from 22 January 2022, and Matt Stenson's useful caching advice. In addition, Backblaze, with whom Cloudflare are a Bandwidth Alliance partner, have published their own guide detailing how to use Cloudflare's Web Workers to cache content from B2 private buckets. That is worth reading,
Tcpdump is a commandline tool that is used to dump traffic on a network. This tool comes in hand when you want to analyse network captures within the command line. Basically it can do most of the wireshark job.
NOTE This guide might not be complete it just serve as a reference to me.
module/nomodule JS code (including the Safari hack)<script type="module" src="module.js"></script>
<script nomodule src="nomodule.js"></script>
Update September 2020: life's almost good. Edge Chromium is widely rolled out, and Safari 14.0 ships soon with a fix.
Test page: https://jg-testpage.github.io/es-modules/module-nomodule/
