How to Readline - an example and the beginnings of the docs

.gitignore

node_modules/

readline.md

Readline

To use this module, do require('readline'). Readline allows reading of a stream (such as STDIN) on a line-by-line basis.

Note that once you've invoked this module, your node program will not terminate until you've closed the interface, and the STDIN stream. Here's how to allow your program to gracefully terminate:

var rl = require('readline');

var i = rl.createInterface(process.sdtin, process.stdout, null);
i.question("What do you think of node.js?", function(answer) {
  // TODO: Log the answer in a database
  console.log("Thank you for your valuable feedback.");

  // These two lines together allow the program to terminate. Without
  // them, it would run forever.
  i.close();
  process.stdin.destroy();
});

rl.createInterface(input, output, completer)

Takes two streams and creates a readline interface. The completer function is used for autocompletion. When given a substring, it returns [[substr1, substr2, ...], originalsubstring].

createInterface is commonly used with process.stdin and process.stdout in order to accept user input:

var readline = require('readline'),
  rl = readline.createInterface(process.stdin, process.stdout);

rl.setPrompt(prompt, length)

Sets the prompt, for example when you run node on the command line, you see > , which is node's prompt.

rl.prompt()

Readies readline for input from the user, putting the current setPrompt options on a new line, giving the user a new spot to write.

rl.question(query, callback)

Prepends the prompt with query and invokes callback with the user's response. Displays the query to the user, and then invokes callback with the user's response after it has been typed.

Example usage:

interface.question('What is your favorite food?', function(answer) {
  console.log('Oh, so your favorite food is ' + answer);
});

rl.close()

Closes tty.

rl.pause()

Pauses tty.

rl.resume()

Resumes tty.

rl.write()

Writes to tty.

Event: 'line'

function (line) {}

Emitted whenever the in stream receives a \n, usually received when the user hits enter, or return. This is a good hook to listen for user input.

Example of listening for line:

rl.on('line', function (cmd) {
  console.log('You just typed: '+cmd);
});

Event: 'close'

function () {}

Emitted whenever the in stream receives a ^C or ^D, respectively known as SIGINT and EOT. This is a good way to know the user is finished using your program.

Example of listening for close, and exiting the program afterward:

rl.on('close', function() {
  console.log('goodbye!');
  process.exit(0);
});

Here's an example of how to use all these together to craft a tiny command line interface:

var readline = require('readline'),
  rl = readline.createInterface(process.stdin, process.stdout),
  prefix = 'OHAI> ';

rl.on('line', function(line) {
  switch(line.trim()) {
    case 'hello':
      console.log('world!');
      break;
    default:
      console.log('Say what? I might have heard `' + line.trim() + '`');
      break;
  }
  rl.setPrompt(prefix, prefix.length);
  rl.prompt();
}).on('close', function() {
  console.log('Have a great day!');
  process.exit(0);
});
console.log(prefix + 'Good to see you. Try typing stuff.');
rl.setPrompt(prefix, prefix.length);
rl.prompt();

Take a look at this slightly more complicated example, and http-console for a real-life use case.

zreadline-example-short.js

var readline = require('readline'),
  rl = readline.createInterface(process.stdin, process.stdout),
  prefix = 'OHAI> ';

rl.on('line', function(line) {
  switch(line.trim()) {
    case 'hello':
      console.log('world!');
      break;
    default:
      console.log('Say what? I might have heard `' + line.trim() + '`');
      break;
  }
  rl.setPrompt(prefix, prefix.length);
  rl.prompt();
}).on('close', function() {
  console.log('Have a great day!');
  process.exit(0);
});
console.log(prefix + 'Good to see you. Try typing stuff.');
rl.setPrompt(prefix, prefix.length);
rl.prompt();

zreadline-example.js

// 
// Based on github.com/cloudhead/http-console
// An attempt at a simplified readline example.
// 

var readline = require('readline')
  , util = require('util')
  , colors = require('colors') // npm install colors
  , rl = readline.createInterface(process.stdin, process.stdout, completer)

  , help = [ '.help        ' + 'display this message.'.grey
           , '.error       ' + 'display an example error'.grey
           , '.q[uit]      ' + 'exit console.'.grey
           ].join('\n')
  ;

// This should work now, thanks to @josher19
function completer(line) {
  var completions = '.help .error .exit .quit .q'.split(' ')
  var hits = completions.filter(function(c) {
    if (c.indexOf(line) == 0) {
      // console.log('bang! ' + c);
      return c;
    }
  });
  return [hits && hits.length ? hits : completions, line];
}

function welcome() {
  util.puts([ "= readline-demo "
            , "= Welcome, enter .help if you're lost."
            , "= Try counting from 1 to 5!"
            ].join('\n').grey);
  prompt();
}

function prompt() {
  var arrow    = '> '
    , length = arrow.length
    ;

  rl.setPrompt(arrow.grey, length);
  rl.prompt();
}

var state = 1;
function exec(command) {
  var num = parseInt(command, 10);
  if (1 <= num && num <= 5) {
    if (state === num) {
      state++;
      console.log('WIN'.green);
    } else {
      console.log(('Try entering a different number, like ' 
                  + state + ' for example').red);
    }
    if (state === 6) {
      console.log('WOW YOU ROCKS A LOT!'.rainbow);
      process.exit(0);
    }

  } else if (command[0] === '.') {
  
    switch (command.slice(1)) {
      case 'help':
        util.puts(help.yellow);
        break;
      case 'error':
        console.log("Here's what an error might look like");
        JSON.parse('{ a: "bad JSON" }');
        break;
      case 'exit':
      case 'quit':
      case 'q':
        process.exit(0);
        break;
    }
  } else {
    // only print if they typed something
    if (command !== '') {
      console.log(('\'' + command 
                  + '\' is not a command dude, sorryz').yellow);
    }
  }
  prompt();
}

// 
// Set things up
//
rl.on('line', function(cmd) {
  exec(cmd.trim());
}).on('close', function() {
  // only gets triggered by ^C or ^D
  util.puts('goodbye!'.green);
  process.exit(0);
});

process.on('uncaughtException', function(e) {
  util.puts(e.stack.red);
  rl.prompt();
});

welcome();

// Helpful thing I didn't get around to using:
// Make sure the buffer is flushed before
// we display the prompt.
function flush(callback) {
  if (process.stdout.write('')) {
    callback();
  } else {
    process.stdout.once('drain', function() {
      callback();
    });
  }
};

Here is a fixed completer:

// fixed to use filter instead of map
function completer(line) {
  var completions = '.help .error .exit .quit .q'.split(' ')
  var hits = completions.filter(function(c) {
    if (c.indexOf(line) == 0) {
      // console.log('bang! ' + c);
      return c;
    }
  });
  return [hits && hits.length ? hits : completions, line];
}

hey josher, if it is still broken in the node docs, you should submit a pull request :) Cheers, D

On Mon, Apr 9, 2012 at 2:16 AM, josher19 < ***@***.*** > wrote: Here is a fixed completer: // fixed to use filter instead of map function completer(line) { var completions = '.help .error .exit .quit .q'.split(' ') var hits = completions.filter(function(c) { if (c.indexOf(line) == 0) { // console.log('bang! ' + c); return c; } }); return [hits && hits.length ? hits : completions, line]; } --- Reply to this email directly or view it on GitHub: https://gist.github.com/901104

## See my projects at dtrejo.com

Looks like it was removed from the node docs.

http://nodejs.org/api/readline.html (for v0.6.14) has a link pointing to this gist.
Current node master branch only mentions completer briefly. Shall I insert this as an example under the text:

...

Which ends up looking something like: [[substr1, substr2, ...], originalsubstring].

Example:

function completer(line) {
  var completions = '.help .error .exit .quit .q'.split(' ')
  var hits = completions.filter(function(c) {
    if (c.indexOf(line) == 0) {
      // console.log('Found: ' + c);
      return c;
    }
  });
  // show all completions if none found
  return [hits.length ? hits : completions, line];
}

I think it was removed by mistake sounds good to me :) Thanks for looking into this, if you have any issue w/ submitting the pull request, if you go into [IRC](http://bit.ly/nodeIRC) they will help you get it into master :) D

On Mon, Apr 9, 2012 at 11:32 PM, josher19 < ***@***.*** > wrote: Looks like it was removed from the node docs. http://nodejs.org/api/readline.html (for v0.6.14) has a link pointing to this gist. Current node [master branch](https://github.com/joyent/node/blob/master/doc/api/readline.markdown"joyent/node api readline.md") only mentions completer briefly. Shall I insert this as an example under the text: ... Which ends up looking something like: `[[substr1, substr2, ...], originalsubstring]`. Example: ``` javascript function completer(line) { var completions = '.help .error .exit .quit .q'.split(' ') var hits = completions.filter(function(c) { if (c.indexOf(line) == 0) { // console.log('Found: ' + c); return c; } }); // show all completions if none found return [hits.length ? hits : completions, line]; } ``` --- Reply to this email directly or view it on GitHub: https://gist.github.com/901104

## See my projects at dtrejo.com