Skip to content

Instantly share code, notes, and snippets.

@KunYi
Last active October 4, 2021 13:00
Show Gist options
  • Select an option

  • Save KunYi/13277fa051ee712dc73bf8fb003309d9 to your computer and use it in GitHub Desktop.

Select an option

Save KunYi/13277fa051ee712dc73bf8fb003309d9 to your computer and use it in GitHub Desktop.
OpenSUSE Tumbleweed 20210927 on SRG-IM8P install & boot message(console.log) for system ready ir
U-Boot SPL 2021.04-5.10.35-2.0.0+g79943c815e (Aug 26 2021 - 10:28:03 +0000)
DDRINFO: start DRAM init
DDRINFO: DRAM rate 3000MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
SEC0: RNG instantiated
Normal Boot
WDT: Not found!
Trying to boot from BOOTROM
image offset 0x0, pagesize 0x200, ivt offset 0x0
Authenticate image from DDR location 0x401fcdc0...
NOTICE: BL31: v2.4(release):lf-5.10.35-2.0.0-rc2-0-gec35fef92
NOTICE: BL31: Built : 09:05:55, May 28 2021
U-Boot 2021.04-5.10.35-2.0.0+g79943c815e (Aug 26 2021 - 10:28:03 +0000)
CPU: i.MX8MP[6] rev1.1 1600 MHz (running at 1200 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 43C
Reset cause: POR
Model: AAEON SRG-IM8P IoT Gateway
DRAM: 2 GiB
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
[*]-Video Link 0fail to find output device
probe video device failed, ret -19
[0] lcd-controller@32e80000, video
fail to find output device
probe video device failed, ret -19
In: serial
Out: serial
Err: serial
SEC0: RNG instantiated
BuildInfo:
- ATF ec35fef
flash target is MMC:2
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - a2:fa:f1:56:31:d0
Warning: ethernet@30bf0000 (eth1) using random MAC address - 5e:ac:57:bb:41:0b
eth0: ethernet@30be0000, eth1: ethernet@30bf0000 [PRIME]
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 2  1  0
starting USB...
Bus dwc3@38100000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus dwc3@38200000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus dwc3@38100000 for devices... 1 USB Device(s) found
scanning bus dwc3@38200000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Device 0: Vendor: USB Rev: 1.00 Prod: SanDisk 3.2Gen1
Type: Removable Hard Disk
Capacity: 14664.0 MB = 14.3 GB (30031872 x 512)
... is now current device
Scanning usb 0:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
MMC: no card present
Scanning disk [email protected]...
Disk [email protected] not ready
Scanning disk [email protected]...
Bad magic number for SquashFS image.
** Unrecognized filesystem type **
Scanning disk usb_mass_storage.lun0...
Bad magic number for SquashFS image.
** Unrecognized filesystem type **
Found 7 disks
fail to find output device
ERROR: invalid device tree
Found EFI removable media binary efi/boot/bootaa64.efi
853872 bytes read in 28 ms (29.1 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Remove /soc@0/bus@30800000/ethernet@30be0000:phy-reset-gpios
Remove /soc@0/bus@30800000/ethernet@30bf0000:phy-reset-gpios
Booting /efi\boot\bootaa64.efi
Welcome to GRUB!
ethernet@30bf0000 Waiting for PHY auto negotiation to complete. done
.Please press 't' to show the boot menu on this console
error: ../../grub-core/video/video.c:761:no suitable video mode found.
openSUSE Tumbleweed
┌───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││└───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Use the ▲ and â–Œ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. Boot from Hard Disk *Installation Upgrade More ... The highlighted entry will be executed automatically in 60s. The highlighted entry will be executed automatically in 59s. The highlighted entry will be executed automatically in 58s. Loading kernel ...
Loading initial ramdisk ...
EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable
EFI stub: ERROR: FIRMWARE BUG: kernel image not aligned on 64k boundary
EFI stub: ERROR: FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000][ T0] Linux version 5.14.6-1-default (geeko@buildhost) (gcc (SUSE Linux) 11.2.1 20210816 [revision 056e324ce46a7924b5cf10f61010cf9dd2ca10e9], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.37.20210803-1) #1 SMP Mon Sep 20 07:02:13 UTC 2021 (6131a3c)
[ 0.000000][ T0] Machine model: AAEON SRG-IM8P IoT Gateway
[ 0.000000][ T0] efi: EFI v2.80 by Das U-Boot
[ 0.000000][ T0] efi: RTPROP=0xbaecb040 SMBIOS=0xbaec7000 MOKvar=0xbade6000 MEMRESERVE=0xbab14040
[ 0.000000][ T0] OF: reserved mem: failed to allocate memory for node 'linux,cma'
[ 0.000000][ T0] NUMA: No NUMA configuration found
[ 0.000000][ T0] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000][ T0] NUMA: NODE_DATA [mem 0xbfbd7480-0xbfbdbfff]
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] DMA [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000][ T0] DMA32 empty
[ 0.000000][ T0] Normal empty
[ 0.000000][ T0] Device empty
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000040000000-0x0000000055ffffff]
[ 0.000000][ T0] node 0: [mem 0x0000000056000000-0x0000000057ffffff]
[ 0.000000][ T0] node 0: [mem 0x0000000058000000-0x00000000baebefff]
[ 0.000000][ T0] node 0: [mem 0x00000000baebf000-0x00000000baec5fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baec6000-0x00000000baec6fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baec7000-0x00000000baec7fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baec8000-0x00000000baec9fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baeca000-0x00000000baecdfff]
[ 0.000000][ T0] node 0: [mem 0x00000000baece000-0x00000000baecefff]
[ 0.000000][ T0] node 0: [mem 0x00000000baecf000-0x00000000baed3fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baed4000-0x00000000baed4fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baed5000-0x00000000baed5fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baed6000-0x00000000baed7fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baed8000-0x00000000baed9fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baeda000-0x00000000baedafff]
[ 0.000000][ T0] node 0: [mem 0x00000000baedb000-0x00000000baedbfff]
[ 0.000000][ T0] node 0: [mem 0x00000000baedc000-0x00000000baedcfff]
[ 0.000000][ T0] node 0: [mem 0x00000000baedd000-0x00000000baeddfff]
[ 0.000000][ T0] node 0: [mem 0x00000000baede000-0x00000000baedffff]
[ 0.000000][ T0] node 0: [mem 0x00000000baee0000-0x00000000baee0fff]
[ 0.000000][ T0] node 0: [mem 0x00000000baee1000-0x00000000bdedffff]
[ 0.000000][ T0] node 0: [mem 0x00000000bdee0000-0x00000000bdefffff]
[ 0.000000][ T0] node 0: [mem 0x00000000bdf00000-0x00000000bfffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000][ T0] psci: probing for conduit method from DT.
[ 0.000000][ T0] psci: PSCIv1.1 detected in firmware.
[ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000][ T0] psci: Trusted OS migration not required
[ 0.000000][ T0] psci: SMC Calling Convention v1.2
[ 0.000000][ T0] percpu: Embedded 34 pages/cpu s100248 r8192 d30824 u139264
[ 0.000000][ T0] Detected VIPT I-cache on CPU0
[ 0.000000][ T0] CPU features: detected: GIC system register CPU interface
[ 0.000000][ T0] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000][ T0] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000][ T0] CPU features: detected: ARM erratum 845719
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000][ T0] Policy zone: DMA
[ 0.000000][ T0] Kernel command line: BOOT_IMAGE=/boot/aarch64/linux splash=silent
[ 0.000000][ T0] Unknown command line parameters: BOOT_IMAGE=/boot/aarch64/linux splash=silent
[ 0.000000][ T0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000][ T0] Memory: 131012K/2097152K available (13632K kernel code, 3312K rwdata, 11480K rodata, 6848K init, 1606K bss, 250076K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u64 called from __kmem_cache_create+0x34/0x580 with crng_init=0
[ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000][ T0] ftrace: allocating 44445 entries in 174 pages
[ 0.000000][ T0] ftrace: allocated 174 pages with 5 groups
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] rcu: Hierarchical RCU implementation.
[ 0.000000][ T0] rcu: RCU event tracing is enabled.
[ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=480 to nr_cpu_ids=4.
[ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
[ 0.000000][ T0] Rude variant of Tasks RCU enabled.
[ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000][ T0] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000][ T0] GICv3: 160 SPIs implemented
[ 0.000000][ T0] GICv3: 0 Extended SPIs implemented
[ 0.000000][ T0] GICv3: Distributor has no Range Selector support
[ 0.000000][ T0] Root IRQ handler: gic_handle_irq
[ 0.000000][ T0] GICv3: 16 PPIs implemented
[ 0.000000][ T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[ 0.000000][ T0] ITS: No ITS available, not enabling LPIs
[ 0.000000][ T0] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[ 0.000000][ T0] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[ 0.000894][ T0] Console: colour dummy device 80x25
[ 0.001583][ T0] printk: console [tty0] enabled
[ 0.001675][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=80000)
[ 0.001700][ T0] pid_max: default: 32768 minimum: 301
[ 0.001807][ T0] LSM: Security Framework initializing
[ 0.001893][ T0] AppArmor: AppArmor initialized
[ 0.001994][ T0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002017][ T0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003538][ T1] rcu: Hierarchical SRCU implementation.
[ 0.005783][ T1] Remapping and enabling EFI services.
[ 0.006151][ T1] smp: Bringing up secondary CPUs ...
[ 0.006622][ T0] Detected VIPT I-cache on CPU1
[ 0.006649][ T0] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[ 0.006691][ T0] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007199][ T0] Detected VIPT I-cache on CPU2
[ 0.007219][ T0] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[ 0.007242][ T0] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007691][ T0] Detected VIPT I-cache on CPU3
[ 0.007710][ T0] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[ 0.007731][ T0] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007797][ T1] smp: Brought up 1 node, 4 CPUs
[ 0.007890][ T1] SMP: Total of 4 processors activated.
[ 0.007904][ T1] CPU features: detected: 32-bit EL0 Support
[ 0.007915][ T1] CPU features: detected: 32-bit EL1 Support
[ 0.007929][ T1] CPU features: detected: CRC32 instructions
[ 0.008025][ T1] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.016156][ T1] CPU: All CPU(s) started at EL2
[ 0.016208][ T14] alternatives: patching kernel code
[ 0.056946][ T32] node 0 deferred pages initialised in 40ms
[ 0.058074][ T1] devtmpfs: initialized
[ 0.065140][ T1] Registered cp15_barrier emulation handler
[ 0.065177][ T1] Registered setend emulation handler
[ 0.065194][ T1] KASLR disabled due to lack of seed
[ 0.065422][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.065457][ T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.065768][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.066575][ T1] SMBIOS 3.0 present.
[ 0.066598][ T1] DMI: /, BIOS 2021.04-5.10.35-2.0.0+g79943c815e 08/26/2021
[ 0.067037][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.067474][ T1] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.067527][ T1] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.067576][ T1] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.067623][ T1] audit: initializing netlink subsys (disabled)
[ 0.067808][ T36] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
[ 0.068886][ T1] thermal_sys: Registered thermal governor 'fair_share'
[ 0.068892][ T1] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.068905][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.068917][ T1] thermal_sys: Registered thermal governor 'user_space'
[ 0.069353][ T1] cpuidle: using governor ladder
[ 0.069482][ T1] cpuidle: using governor menu
[ 0.069596][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.069683][ T1] ASID allocator initialised with 32768 entries
[ 0.070888][ T1] Serial: AMBA PL011 UART driver
[ 0.080787][ T1] debugfs: Directory 'dummy-iomuxc-gpr@30340000' with parent 'regmap' already present!
[ 0.081071][ T1] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[ 0.100625][ T1] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.100659][ T1] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.100674][ T1] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.100688][ T1] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.799948][ T70] wait_for_initramfs() called before rootfs_initcalls
[ 0.812709][ T1] ACPI: Interpreter disabled.
[ 0.813522][ T1] iommu: Default domain type: Passthrough
[ 0.813770][ T1] vgaarb: loaded
[ 0.814145][ T1] SCSI subsystem initialized
[ 0.814586][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 0.814601][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.814629][ T1] PTP clock support registered
[ 0.814766][ T1] EDAC MC: Ver: 3.0.0
[ 0.815491][ T1] Registered efivars operations
[ 0.816547][ T1] NetLabel: Initializing
[ 0.816564][ T1] NetLabel: domain hash size = 128
[ 0.816574][ T1] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.816644][ T1] NetLabel: unlabeled traffic allowed by default
[ 0.817011][ T1] clocksource: Switched to clocksource arch_sys_counter
[ 0.853225][ T1] VFS: Disk quotas dquot_6.6.0
[ 0.853306][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.853837][ T1] AppArmor: AppArmor Filesystem Enabled
[ 0.853906][ T1] pnp: PnP ACPI: disabled
[ 0.859942][ T1] NET: Registered PF_INET protocol family
[ 0.860075][ T1] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.861057][ T1] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.861103][ T1] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.861261][ T1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.861482][ T1] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.861646][ T1] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.861726][ T1] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.861781][ T1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.861954][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.861982][ T1] NET: Registered PF_XDP protocol family
[ 0.862000][ T1] PCI: CLS 0 bytes, default 64
[ 0.862336][ T69] Trying to unpack rootfs image as initramfs...
[ 0.874783][ T1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.875200][ T1] kvm [1]: IPA Size Limit: 40 bits
[ 0.878048][ T1] kvm [1]: GICv3: no GICV resource entry
[ 0.878067][ T1] kvm [1]: disabling GICv2 emulation
[ 0.878090][ T1] kvm [1]: GIC system register CPU interface enabled
[ 0.878687][ T1] kvm [1]: vgic interrupt IRQ9
[ 0.880078][ T1] kvm [1]: Hyp mode initialized successfully
[ 0.881724][ T1] Initialise system trusted keyrings
[ 0.881761][ T1] Key type blacklist registered
[ 0.881952][ T1] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 0.887079][ T1] zbud: loaded
[ 0.888110][ T1] integrity: Platform Keyring initialized
[ 0.924041][ T1] Key type asymmetric registered
[ 0.924081][ T1] Asymmetric key parser 'x509' registered
[ 0.924142][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.924288][ T1] io scheduler mq-deadline registered
[ 0.924303][ T1] io scheduler kyber registered
[ 0.924486][ T1] io scheduler bfq registered
[ 0.929742][ T1] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.945210][ T1] SoC: i.MX8MP revision 1.1
[ 0.948349][ T1] debugfs: Directory 'dummy-reset-controller@30390000' with parent 'regmap' already present!
[ 0.949194][ T1] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.956874][ T1] Serial: AMBA driver
[ 0.957572][ T1] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 30, base_baud = 1500000) is a IMX
[ 0.957615][ T1] imx-uart 30890000.serial: Console IMX rounded baud rate from 114286 to 114300
[ 2.256789][ T1] printk: console [ttymxc1] enabled
[ 2.262849][ T1] msm_serial: driver initialized
[ 2.271463][ T1] libphy: Fixed MDIO Bus: probed
[ 2.277068][ T1] mousedev: PS/2 mouse device common for all mice
[ 2.286870][ T1] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.294232][ T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 2.301699][ T1] hid: raw HID events driver (C) Jiri Kosina
[ 6.696307][ T69] Freeing initrd memory: 130956K
[ 6.702073][ T1] drop_monitor: Initializing network drop monitor service
[ 6.709654][ T1] NET: Registered PF_INET6 protocol family
[ 6.717737][ T1] Segment Routing with IPv6
[ 6.722120][ T1] RPL Segment Routing with IPv6
[ 6.727536][ T1] registered taskstats version 1
[ 6.732497][ T1] Loading compiled-in X.509 certificates
[ 6.738135][ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: 9ddf43d9f1a027273f52c6c0775908ee01671325'
[ 6.748351][ T1] zswap: loaded using pool lzo/zbud
[ 6.753615][ T1] page_owner is disabled
[ 6.757914][ T1] Key type ._fscrypt registered
[ 6.762624][ T1] Key type .fscrypt registered
[ 6.767257][ T1] Key type fscrypt-provisioning registered
[ 6.774365][ T1] Key type encrypted registered
[ 6.779112][ T1] AppArmor: AppArmor sha1 policy hashing enabled
[ 6.785438][ T1] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 6.923184][ T1] integrity: Loaded X.509 cert 'openSUSE Secure Boot CA: 6842600de22c4c477e95be23dfea9513e5971762'
[ 6.933745][ T1] ima: No TPM chip found, activating TPM-bypass!
[ 6.939944][ T1] Loading compiled-in module X.509 certificates
[ 6.946114][ T1] Loaded X.509 cert 'openSUSE Secure Boot Signkey: 9ddf43d9f1a027273f52c6c0775908ee01671325'
[ 6.956136][ T1] ima: Allocated hash algorithm: sha256
[ 6.961580][ T1] ima: No architecture policies found
[ 6.966856][ T1] evm: Initialising EVM extended attributes:
[ 6.972701][ T1] evm: security.selinux
[ 6.976715][ T1] evm: security.SMACK64 (disabled)
[ 6.981691][ T1] evm: security.SMACK64EXEC (disabled)
[ 6.987015][ T1] evm: security.SMACK64TRANSMUTE (disabled)
[ 6.992767][ T1] evm: security.SMACK64MMAP (disabled)
[ 6.998088][ T1] evm: security.apparmor
[ 7.002190][ T1] evm: security.ima
[ 7.005856][ T1] evm: security.capability
[ 7.010134][ T1] evm: HMAC attrs: 0x1
[ 7.041122][ T1] Freeing unused kernel memory: 6848K
[ 7.117081][ T1] Run /init as init process
[ 7.241389][ T137] zram: Added device: zram0
[ 7.451346][ T136] zram0: detected capacity change from 0 to 2097152
[ 9.501144][ T1] EXT4-fs (zram0): mounting ext2 file system using the ext4 subsystem
[ 9.510397][ T1] EXT4-fs (zram0): mounted filesystem without journal. Opts: (null). Quota mode: none.
[ 14.027705][ T149] loop: module loaded
[ 14.199476][ T159] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 14.339281][ T1] loop0: detected capacity change from 0 to 208128
[ 15.092824][ T1] loop1: detected capacity change from 0 to 27520
>>> openSUSE Tumbleweed installation program v8.0.3 (c) 1996-2021 SUSE LLC <<<
Starting udev... [ 15.806093][ T176] alua: device handler registered
[ 15.825847][ T179] emc: device handler registered
[ 15.846355][ T180] rdac: device handler registered
[ 17.586799][ T207] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.655234][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.669966][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.782790][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.799583][ T214] gpio-142 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 17.805736][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.818177][ T201] pps pps0: new PPS source ptp0
[ 17.828456][ T211] CAN device driver interface
[ 17.835828][ T201] libphy: fec_enet_mii_bus: probed
[ 17.837351][ T214] i2c i2c-0: IMX I2C adapter registered
[ 17.842639][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.846812][ T214] gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 17.868641][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.875144][ T214] i2c i2c-1: IMX I2C adapter registered
[ 17.879620][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.913020][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.928091][ T203] sdhci: Secure Digital Host Controller Interface driver
[ 17.935004][ T203] sdhci: Copyright(c) Pierre Ossman
[ 17.943344][ T201] fec 30be0000.ethernet eth0: registered PHC device 0
[ 17.956292][ T202] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator
[ 17.963973][ T214] gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 17.972950][ T202] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator
[ 17.983312][ T214] i2c i2c-2: IMX I2C adapter registered
[ 17.983800][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.002891][ T212] sdhci-pltfm: SDHCI platform and OF driver helper
[ 18.005883][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.033852][ T7] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[ 18.074038][ T223] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[ 18.083218][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.089025][ T7] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 18.106751][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.167134][ T211] cryptd: max_cpu_qlen set to 1000
[ 18.185603][ T46] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 18.819228][ T210] nxp-pca9450 0-0025: No IRQ configured?
[ 18.824761][ T210] nxp-pca9450: probe of 0-0025 failed with error -22
[ 18.879819][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.890834][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.965260][ T210] rtc-ds1307 2-0068: SET TIME!
[ 18.989723][ T210] rtc-ds1307 2-0068: registered as rtc0
[ 18.997510][ T210] rtc-ds1307 2-0068: setting system clock to 2000-01-01T00:00:35 UTC (946684835)
[ 19.007427][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.014435][ T215] mmcblk2: mmc2:0001 DG4016 14.7 GiB
[ 19.036049][ T215] mmcblk2boot0: mmc2:0001 DG4016 4.00 MiB
[ 19.067380][ T215] mmcblk2boot1: mmc2:0001 DG4016 4.00 MiB
[ 19.087841][ T211] usbcore: registered new interface driver usbfs
[ 19.097137][ T215] mmcblk2rpmb: mmc2:0001 DG4016 4.00 MiB, chardev (236:0)
[ 19.105706][ T211] usbcore: registered new interface driver hub
[ 19.119182][ T211] usbcore: registered new device driver usb
[ 19.252411][ T216] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 19.287138][ T216] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 19.295939][ T216] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010
[ 19.299771][ T215] mmcblk2: p1 p2 p3
[ 19.317128][ T216] xhci-hcd xhci-hcd.0.auto: irq 212, io mem 0x38100000
[ 19.327294][ T216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 19.336302][ T216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.344282][ T216] usb usb1: Product: xHCI Host Controller
[ 19.349899][ T216] usb usb1: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 19.356886][ T216] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 19.364835][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.379406][ T216] hub 1-0:1.0: USB hub found
[ 19.383937][ T216] hub 1-0:1.0: 1 port detected
[ 19.389715][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.398866][ T216] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 19.405094][ T216] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 19.416117][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.426001][ T216] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 19.433375][ T216] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.438644][ C0] random: fast init done
[ 19.451741][ T216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 19.460841][ T216] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.468838][ T216] usb usb2: Product: xHCI Host Controller
[ 19.474442][ T216] usb usb2: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 19.481458][ T216] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 19.491990][ T216] hub 2-0:1.0: USB hub found
[ 19.496536][ T216] hub 2-0:1.0: 1 port detected
[ 19.502451][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.511956][ T216] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 19.511987][ T216] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 19.512369][ T216] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010
[ 19.512438][ T216] xhci-hcd xhci-hcd.1.auto: irq 213, io mem 0x38200000
[ 19.521273][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.521773][ T216] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 19.521795][ T216] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.521801][ T216] usb usb3: Product: xHCI Host Controller
[ 19.521805][ T216] usb usb3: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 19.521810][ T216] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 19.523588][ T216] hub 3-0:1.0: USB hub found
[ 19.523657][ T216] hub 3-0:1.0: 1 port detected
[ 19.524091][ T216] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 19.524116][ T216] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 19.524136][ T216] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 19.525076][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.525566][ T216] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 19.525683][ T216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 19.525691][ T216] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.525698][ T216] usb usb4: Product: xHCI Host Controller
[ 19.525702][ T216] usb usb4: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 19.525707][ T216] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 19.526859][ T216] hub 4-0:1.0: USB hub found
[ 19.526925][ T216] hub 4-0:1.0: 1 port detected
[ 19.528976][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.532238][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.537561][ T7] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
ok
[ 19.826307][ T25] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 20.018448][ T25] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[ 20.027522][ T25] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 20.035392][ T25] usb 3-1: Product: USB2.0 Hub
[ 20.101807][ T25] hub 3-1:1.0: USB hub found
[ 20.106671][ T25] hub 3-1:1.0: 4 ports detected
[ 20.167061][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 20.180364][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 20.477091][ T25] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd
[ 20.627828][ T25] usb 3-1.1: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[ 20.636916][ T25] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 20.645071][ T25] usb 3-1.1: Product: SanDisk 3.2Gen1
[ 20.649093][ T434] random: crng init done
[ 20.650451][ T25] usb 3-1.1: Manufacturer: USB
[ 20.659286][ T25] usb 3-1.1: SerialNumber: 00000621122120110752
[ 20.669027][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 20.689679][ T202] usb-storage 3-1.1:1.0: USB Mass Storage device detected
[ 20.697336][ T202] scsi host0: usb-storage 3-1.1:1.0
[ 20.702984][ T202] usbcore: registered new interface driver usb-storage
[ 20.703852][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 20.719418][ T202] usbcore: registered new interface driver uas
[ 20.939669][ T454] RPC: Registered named UNIX socket transport module.
[ 20.946324][ T454] RPC: Registered udp transport module.
[ 20.951797][ T454] RPC: Registered tcp transport module.
[ 20.957230][ T454] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.768080][ T223] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[ 21.779925][ T221] sd 0:0:0:0: [sda] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 21.792022][ T221] sd 0:0:0:0: [sda] Write Protect is off
[ 21.798031][ T221] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 22.213602][ T221] sda: sda1 sda2
[ 22.230128][ T221] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 22.237373][ T223] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 23.995474][ T489] No iBFT detected.
1;-1fLoading basic drivers
Hardware detection
/sbin/inst_setup: 27: echo: echo: I/O error
/sbin/inst_setup: 28: echo: echo: I/O error
date: write error: Input/output error
/sbin/inst_setup: 30: echo: echo: I/O error
date: write error: Input/output error
/sbin/inst_setup: 32: echo: echo: I/O error
starting rsyslogd (logging to /dev/tty4)... ok
starting klogd... ok
starting nscd... ok
starting yast...
Starting Installer
> hal.1: read hal data > misc.9: kernel log > misc.1: misc data > misc.1.1: open serial > misc.2.1: io > misc.2.2: dma > misc.2.3: irq > misc.3: FPU > misc.3.1: DMA > misc.3.2: PIC > misc.3.3: timer > misc.3.4: RTC > pci.1: sysfs drivers > pci.2: get sysfs pci data > pci.4: build list > pci.3: macio > pci.4: vio > pci.5: xen > pci.6: ps3 > pci.7: platform > pci.8: of_platform > pci.9: vm > pci.10: virtio > pci.11: ibmebus > pci.12: uisvirtpci > pci.13: mmc > pci.14: sdio > pci.15: nd > pci.16: visorbus > pci.17: mdio > serial.1: read info > serial.2: build list > misc.5: misc data > usb.1: sysfs drivers > usb.2: usb > usb.3.1: joydev mod > usb.3.2: evdev mod > usb.3.3: input > usb.3.4: lp > usb.3.5: serial > braille.1.1: alva > braille.2.1: alva open > braille.3.1: alva init ok > braille.4.1: alva read data > braille.5.1: alva read done > braille.1.1: fhp_old > braille.2.1: fhp open > braille.3.1: fhp init ok > braille.4.1: fhp write ok > braille.5.1: fhp read done > braille.1.1: fhp_el > braille.2.1: fhp open > braille.3.1: fhp init ok > braille.4.1: fhp write ok > braille.5.1: fhp read done > braille.1.1: ht > braille.2.1: ht open > braille.3.1: ht init ok > braille.4.1: ht write ok > braille.5.1: ht read done > braille.1.1: baum > braille.2.1: baum open > braille.3.1: baum write ok > braille.4.1: baum read done > braille.1.1: fhp new > braille.2.1: fhp2 open > braille.3.1: fhp2 write ok > braille.4.1: fhp2 read done > int.2: cdrom > int.3: media > int.4: floppy > int.6: mouse > int.7: hdb > int.7.1: modules > int.8: usbscsi > int.9: hotplug > int.10: modem > int.11: wlan > int.12: udev > int.13: device names > int.16: parent > hal.1: read hal data > cpu.1: cpuinfo > hal.1: read hal data > misc.9: kernel log > misc.1: misc data > misc.2.1: io > misc.2.2: dma > misc.2.3: irq > misc.3: FPU > misc.3.1: DMA > misc.3.2: PIC > misc.3.3: timer > misc.3.4: RTC > pci.1: sysfs drivers > pci.2: get sysfs pci data > pci.4: build list > pci.3: macio > pci.4: vio > pci.5: xen > pci.6: ps3 > pci.7: platform > pci.8: of_platform > pci.9: vm > pci.10: virtio > pci.11: ibmebus > pci.12: uisvirtpci > pci.13: mmc > pci.14: sdio > pci.15: nd > pci.16: visorbus > pci.17: mdio > misc.5: misc data > int.2: cdrom > int.3: media > int.4: floppy > int.6: mouse > int.7: hdb > int.7.1: modules > int.8: usbscsi > int.9: hotplug > int.10: modem > int.11: wlan > int.12: udev > int.13: device names > int.16: parent > hal.1: read hal data > misc.9: kernel log > misc.1: misc data > misc.2.1: io > misc.2.2: dma > misc.2.3: irq > misc.3: FPU > misc.3.1: DMA > misc.3.2: PIC > misc.3.3: timer > misc.3.4: RTC > cpu.1: cpuinfo > misc.5: misc data > usb.1: sysfs drivers > usb.2: usb > usb.3.1: joydev mod > usb.3.2: evdev mod > usb.3.3: input > usb.3.4: lp > usb.3.5: serial > input.1: joydev mod > input.1.1: evdev mod > input.2: input > kbd.2: uml > cpu.1: cpuinfo > kbd.3: serial console > int.2: cdrom > int.3: media > int.4: floppy > int.6: mouse > int.7: hdb > int.7.1: modules > int.8: usbscsi > int.9: hotplug > int.10: modem > int.11: wlan > int.12: udev > int.13: device names > int.16: parent GProbing connected terminal...

Initializing virtual console...
Found a Linux console terminal on /dev/console (80 columns x 24 lines).
Sampling every 5 s to /var/log/YaST2/memsample.zcat
*** Starting YaST2 ***
YaST2 - installation @ install Initializing ... [Help][Back][Abort][Next]                   [Next] F1 Help F8 Back F9 Abort F10 Next[Next][Help][Next][Back]9 Abort[Abort] YaST2 - installation @ install [Help][Back][Abort][Next] F1 Help F9 Abort YaST2 - installation @ install [Help][Back][Abort][Next] F1 Help F9 Abort[Abort]Initializing...[Next] F10 Next[Back] F8 Back F9 Abort F10 Next- Detect network devices- Read driver information- Detect current status- Read device configuration- Read network configuration0% Network Configuration  Initializing Network Configuration- - Detect network devices - Detect network devices- - Read driver information - Read driver information - Detect network devices- - Detect current status - Detect current statusnetwork devices- Detect current status- - Read device configuration - Read device configurationDetect network devices - Read device configuration- - Read network configuration - Read network configurationDetect network devices - Read network configuration 0%  - Detect network devices - Read driver information - Detect current status - Read device configuration - Read network configuration Initializing Network Configuration Initializing Network Configuration - Detect network devices - Read driver information - Detect current status - Read device configuration - Read network configuration 0% [Help][Back][Help][Back][Abort][Help] [Abort][Next][Help][Next] Initializing Network Configuration [Help][Back][Abort][Next][Back][Next]=>Detecting ndiswrapper...2x =>etwork devices...4x =>current status... 60% x =>Reading device configuration...8x =>network configuration...10x Finished [Next][Back] F8 Back F9 Abort F10 Next┌────────────────────────────┐│Initializing repositories...│ └────────────────────────────┘ ┌────────────────────────────┐││└────────────────────────────┘ ... [Help]                   [Next] F1 Help F8 Back F9 Abort F10 Next- Search Available Products- Probe Source Type- Download Descriptions- Rebuild Cache- Load Data0%Adding the Repository...  Adding the Repository...- - Search Available Products - Search Available Products- - Probe Source Type - Probe Source Type - Search Available Products- - Download Descriptions - Download DescriptionsSearch Available Products- Download Descriptions- - Rebuild Cache - Rebuild CacheSearch Available Products- Rebuild Cache- - Load Data - Load DataSearch Available Products- Load Data  0%  - Search Available Products - Probe Source Type - Download Descriptions - Rebuild Cache - Load Data Adding the Repository... Adding the Repository... - Search Available Products - Probe Source Type - Download Descriptions - Rebuild Cache - Load Data 0% [Help]BackHelp[Back]Abort]Help] [Abort][Next][Help][Next] Adding the Repository... [Help][Back][Abort][Next][Back][Next][Help][Next]Adding the Repository...=>x =>x =>0%9 AbortBuilding repository 'openSUSE-20210927-0' cache100%59% x =>75 x =>945 6 x 100 Initializing Network Configuration Detect network devices Read driver informationetect current statuad device configurationRead network configuration[Back][Next]8 Back F9 Abort F10 Next[Help][Next]Language, Keyboard and License AgreementLanguage, Keyboard and License Agreement [☰]LanguageKeyboard LayoutAfrikaans - Afrikaans▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓ Arabic▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓Keyboard Test▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒License Agreement┌────────────────────────────────────────────────────────────────────────────┐││││││││││││││││└────────────────────────────────────────────────────────────────────────────┘[License Translations...][☰][Next][Back][☰]Afrikaans - Afrikaans▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓English (US)▒▒▒▒▒▒▒▒▒English (US)LICENSE AGREEMENT─openSUSE® TumbleweedThis agreement governs your download, installation, or useof openSUSE Tumbleweed and its updates, regardless of the deliverymechanism. openSUSE Tumbleweed is a collective work under US CopyrightLaw. Subject to the following terms, The openSUSE Project grants toyou a license to this collective work pursuant to the GNU General├─English (US)▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓ English (US)▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓English (US)▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒┌────────────────────────────────────────────────────────────────────────────┐ │─││ ││ ││ ││ ││ ││ ││ └├───────────────────────────────────────────────────────────────────────────┘┌────────────────────────────────────────────────────────────────────────────┐│─││││││││││││││└├───────────────────────────────────────────────────────────────────────────┘[License Translations...][License Translations...][Help][Help][Abort][Abort][Next] [☰] [Next][Back] F8 Back F9 Abort F10 Next Initializing ...                   [Next] ┌────────────────────────────────────────────────────────────┐│Error│ │┌──────────────────────────────────────────────────────────┐│ ││Internal error. Please report a bug report with logs. ┬│ ││Run save_y2logs to get complete logs.││ ││┮│ ││Caller:││ ││/mounts/mp_0001/usr/share/YaST2/lib/y2network/widgets/inte││ ││rfaces_table.rb:114:in `interface_item'││ │└──────────────────────────────────────────────────────────┘│ ││ │[Yes] [No]│ └────────────────────────────────────────────────────────────┘ ┌────────────────────────────────────────────────────────────┐│││┌──────────────────────────────────────────────────────────┐│││┬│││││││┎││││││││││││││└──────────────────────────────────────────────────────────┘│││││└────────────────────────────────────────────────────────────┘9 No F10 Yes┌──────────────────────────────────────────────────────────┐│┬│││┎││││││└──────────────────────────────────────────────────────────┘[Yes][Yes] [No]┌────────────────────────────────────────────────────────────┐│││││││││││││││││││││[No]│└────────────────────────────────────────────────────────────┘ [Help][Next]1 Help F8 Back F9 Abort F10 Next┌──────────────────────────────────────────────────────────────────────────────┐│Calling the YaST module `inst_lan has failed. ││More information can be found near the end of the '/var/log/YaST2/y2log' file ││ ││This is worth reporting a bug at http://bugzilla.suse.com/. ││Please, attach also all YaST logs stored in the '/var/log/YaST2/' directory. ││See http://en.opensuse.org/Bugs/YaST for more information about YaST logs. ││││[Next] [Quit] [Back] [Retry]│└──────────────────────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────────────────────┐│││││││││││││││[Back]│└──────────────────────────────────────────────────────────────────────────────┘6 Retry F8 Back F9 Qui[Back] [Retry][Quit][Retry][Next] [Quit]┌──────────────────────────────────────────────────────────────────────────────┐│││││││││││││││[Next]│└──────────────────────────────────────────────────────────────────────────────┘ [Next][Back]Analyzing the Computer 1 Help F9 Abort- Probe USB devices- Probe FireWire devices- Probe hard disks- Search for system files- Initialize software manager0%System Probing  System Probing- - Probe USB devices - Probe USB devices- - Probe FireWire devices - Probe FireWire devices - Probe USB devices- - Probe hard disks - Probe hard disksUSB devices- Probe hard disks- - Search for system files - Search for system filesProbe USB devices - Search for system files- - Initialize software manager - Initialize software managerProbe USB devices - Initialize software manager 0%  - Probe USB devices - Probe FireWire devices - Probe hard disks - Search for system files - Initialize software manager System Probing System Probing - Probe USB devices - Probe FireWire devices - Probe hard disks - Search for system files - Initialize software manager 0% [Help][Back][Help][Back][Abort][Help] [Abort][Next][Help][Next] System Probing [Help][Back][Abort][Next]Probing USB devices...=>2x FireWire devices...=>4x hard disks... => 60% x Searching for system files...=>8x Initializing software manager...=>10x [Next] F10 Next[Back] F8 Back F9 Abort F10 Next[Next][Back]Initializing Initializing the installation...9 Abort[Next] F10 Next[Back] F8 Back F9 Abort F10 Next[Help][Next]System Role System Roles are predefined use cases which tailor the systemfor the selected scenario.┌──────────────────────────────────────────────────────────────────────────┐│( ) Desktop with KDE Plasma┬│ Graphical system with KDE Plasma as desktop environment. Suitable for ││ Workstations, Desktops and Laptops.││││( ) Desktop with GNOME││ Graphical system with GNOME as desktop environment. Suitable for┮│ Workstations, Desktops and Laptops.││││( ) Desktop with Xfce││ Graphical system with Xfce as desktop environment. Suitable for││ Workstations, Desktops and Laptops.│││└──────────────────────────────────────────────────────────────────────────┘[Next]┌──────────────────────────────────────────────────────────────────────────┐│( ) Desktop with KDE Plasma┬│││││││││┎││││││││││││└──────────────────────────────────────────────────────────────────────────┘ ( ) Desktop with KDE Plasma( ) Desktop with GNOME│( ) Desktop with GNOME│┬││( ) Desktop with Xfce││┮ │( ) Generic Desktop│ │ Graphical system with reduced package set. Intended as base for a │ │ customized software selection.│ DeXfce Xfce as desktop environment. Suitable for ││┬Generic Desktop reduced package set. Intended as basacustomized software selection. ││Server ┮Small set of packages suitable for servers with a text mode interface.( ) Generic Desktop││││( ) Server│┬│ │( ) Transactional Server│ │ Like the Server role but uses a read-only root filesystem to provide │ │ atomic, automatic updates of a system without interfering with the │ │ running system.┮ ( ) Server( ) Transactional Server( ) Server( ) Transactional Serverx┌──────────────────────────────────────────────────────────────────────────┐│││││││││││(x) Server││┬│││││││││┎└──────────────────────────────────────────────────────────────────────────┘[Help][Help][Back][Back][Abort][Abort][Next] [Next]uggested Partitioning ┌──────────────────────────────────────────────────────────────────────┐│Initial layout proposed after adjusting the Guided Setup settings: ┬││ │ * do not enable snapshots for /│ │ * do not propose swap│ ││ │Changes to partitioning:│ ││ │ * Delete partition /dev/mmcblk2p3 (13.09 GiB)│ │ * Create partition /dev/mmcblk2p3 (13.09 GiB) for / with btrfs │ │ * Mount partition /dev/mmcblk2p1 (600.00 MiB) at /boot/efi │ │ * 16 subvolume actions (see details)┮ ││ └──────────────────────────────────────────────────────────────────────┘ [Guided Setup] [Expert Partitioner↓]   [Next] ┌──────────────────────────────────────────────────────────────────────┐│┬│││││││││││││││││││┎││└──────────────────────────────────────────────────────────────────────┘[Next]┌──────────────────────────────────────────────────────────────────────┐│┬│││││││││││││││││││┎││└──────────────────────────────────────────────────────────────────────┘[Guided Setup][Guided Setup][Expert Partitioner↓][Expert Partitioner↓][Help][Help][Back][Back][Abort][Abort][Next] [Next]Initializing ...                   [Next] Clock and Time Zone ┌Region───────────────────────────┐ ┌Time Zone────────────────────────┐│Africa┬ │││Argentina│ │││Asia│ │││Atlantic│ │││Australia│ │││Brazil│ │││Canada│ │││Central and South America│ │││Etc│ │││Europe│ │││Global┮ │││Indian Ocean│ │││Mexico│ │││Pacific│ ││└─────────────────────────────────┘ └─────────────────────────────────┘Date and Time[x] Hardware Clock Set to UTC2021-09-28 - 08:38:34[Other Settings...]┬│ │Russia│ ││ │USA ┮ ││ Alaska (Anchorage)Aleutian (Adak)Arizona (Phoenix)BoiseCentral (Chicago)Eastern (New York)Alaska (Anchorage)Eastern (New York) East Indiana (Indianapolis)Hawaii (Honolulu)Indiana (Marengo)Indiana (Petersburg)Indiana Starke (Knox)Indiana (Tell City)Indiana (Vevay)Indiana (Vincennes)┬┮┮│┮│┮│┮│┮│┮│[Next]┌Region───────────────────────────┐│││││││┬│││││││││││││││││││USA ┮└─────────────────────────────────┘┌Region───────────────────────────┐ ┌Time Zone────────────────────────┐││ │┬││ ││││ │││┬ ││││ ││││ │Eastern (New York) ┮││ ││││ ││││ ││││ ││││ ││││ ││││ │││USA ┮ ││└─────────────────────────────────┘ └─────────────────────────────────┘┌Time Zone────────────────────────┐│┬│││││││││Eastern (New York) ┮││││││││││││││││└─────────────────────────────────┘[x] Hardware Clock Set to UTC[x] Hardware Clock Set to UTC[Other Settings...][Other Settings...][Help][Help][Back][Back][Abort][Abort][Next] [Next]50Suggested Partitioning ┌──────────────────────────────────────────────────────────────────────┐Initial layout proposed after adjusting the Guided Setup settings: ┬ │ * do not enable snapshots for / │ * do not propose swap ││Changes to partitioning: │ │ * Delete partition /dev/mmcblk2p3 (13.09 GiB) │ * Create partition /dev/mmcblk2p3 (13.09 GiB) for / with btrfs │ * Mount partition /dev/mmcblk2p1 (600.00 MiB) at /boot/efi │ * 16 subvolume actions (see details)┮ │└──────────────────────────────────────────────────────────────────────┘ [Guided Setup] [Expert Partitioner↓]  ┌──────────────────────────────────────────────────────────────────────┐ │┬ ││ ││ ││ ││ ││ ││ ││ ││ ││ │┮ ││ └──────────────────────────────────────────────────────────────────────┘  ┌──────────────────────────────────────────────────────────────────────┐│┬│││││││││││││││││││┎││└──────────────────────────────────────────────────────────────────────┘[Next]Local User (x) Create New UserUser's Full Name▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Username▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Password▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Confirm Password▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ [x] Use this password for system administrator [ ] Automatic Login ( ) Skip User Creation[Next]▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒A▒ A▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ a   A▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     A▒ AA▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ a   AA▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     E▒ AAE▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ e   AAE▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     O▒ AAEO▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ o   AAEO▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     N▒ AAEON▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ n   AAEON▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     ▒ AAEON ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒   AAEON ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     I▒ AAEON I▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒   AAEON I▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     O▒ AAEON IO▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒   AAEON IO▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     T▒ AAEON IOT▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒   AAEON IOT▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒     AAEON IOT▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒aaeon▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒aaeon▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒*▒*▒*▒*▒*▒*****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒*▒*▒*▒*▒*▒*****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒[x] Use this password for system administrator[x] Use this password for system administrator( ) Skip User Creation( ) Skip User Creation[Help][Help][Back][Back][Abort][Abort][Next] [Next]┌────────────────────────────────────────────────┐│ Retrieving cracklib-dict-full.rpm extension... │ └────────────────────────────────────────────────┘ ┌────────────────────────────────────────────────┐││└────────────────────────────────────────────────┘ Password *****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Confirm Password *****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒       [Next] F1 Help F8 Back F9 Abort F10 Next┌───────────────────────────────────────────────┐│ Releasing cracklib-dict-full.rpm extension... │ └───────────────────────────────────────────────┘ ┌───────────────────────────────────────────────┐││└───────────────────────────────────────────────┘ Password *****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Confirm Password *****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒[Next]*****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒┌────────────────────────────────────────────────────────┐│ The password is too simple:│ │ it is too short.│ │ │ │ You have used only lowercase letters for the password. │ ││ │ Really use this password?│ ││ │[Yes] [No]│ └────────────────────────────────────────────────────────┘ ┌────────────────────────────────────────────────────────┐│││││││││││││││[Yes]│└────────────────────────────────────────────────────────┘ F9 No F10 Yes┌────────────────────────────────────────────────────────┐│││││││││││││││[Yes]│└────────────────────────────────────────────────────────┘ AAEON IOT▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Username aaeon▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Password *****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Confirm Password *****▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ [x] Use this password for system administrator [ ] Automatic Login ( ) Skip User Creation1 Help F8 Back F9 Abort F10 Next[Next]Installation Settings Click a headline to make changes or use the "Change..." menu below.┌──────────────────────────────────────────────────────────────────────────┐│││││││Analyzing your system...│││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘[Change...↓]┌──────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘ [Change...↓]┌──────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘[Help]┌──────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘[Next][Change...↓] F10 Next
0% [Next] 8 16Booting┬* Boot Loader Type: GRUB2 EFI * Secure Boot: enabled (disable)* Update NVRAM: enabled (disable)┮SoftwareAnalyzing your system...Default systemd targetAnalyzing your system... 25 33 41 50┮│┌───────────────────────────────┐│Evaluating package selection...│ └───────────────────────────────┘ ┌───────────────────────────────┐││└───────────────────────────────┘m...8% 66 ┮│ * Product: openSUSE Tumbleweed* Patterns: + Help and Support Documentation+ Minimal Base System + Enhanced Base System75 83 91 100 ┮││┮│ + AppArmor│└──────────────────────────────────────────────────────────────────────────┘[Change...↓] F1 Help F8 Back F9 Abort[Next][Help][Next]┌──────────────────────────────────────────────────────────────────────────┐│┬│││││┎││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────────────────┐│┬│││││┎││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘ Help ] Back ][Install] F10 Install┌──────────────────────────────────────────────────────────────────────────┐│┬│││││┎││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘[Change...↓][Change...↓][ Help ][ Help ][ Back ][ Back ][Abort][Abort][Install] [Install]┌──────────────────────────────────────────────────────────────────────────┐│┬│││││┎││││││││││││││││││││└──────────────────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────┐│ ┌──────────────────────────────────────────────────┐ │ │ │Confirm Installation│ │ │ ││ │ │ │Information required for the base installation is │ │ │ │now complete. │ │ │ ││ │ │ │If you continue now, partitions on your hard disk │ │ │ │will be modified according to the installation │ │ │ │settings in the previous dialogs.│ │ │ ││ │ │ │Go back and check the settings if you are unsure. │ │ │ │ │ │ │ ││ │ │ ││ │ │ └──────────────────────────────────────────────────┘ │ ││ │[Install] [Back]│ └──────────────────────────────────────────────────────┘ ┌──────────────────────────────────────────────────────┐│││││││││││││││││││││││││││││││││[Back]│└──────────────────────────────────────────────────────┘9 Install F10 Back[Install] [Back]┌──────────────────────────────────────────────────────┐│││││││││││││││││││││││││││││││││[Install]│└──────────────────────────────────────────────────────┘on Settingsadline to make changes or use the "Change..." menu below.───────────────────────────────────────────────────────── Loader Type: GRUB2 EFI e Boot: enabled (disable) e NVRAM: enabled (disable) ct: openSUSE Tumbleweedrns: elp and Support Documentation inimal Base System nhanced Base SystemppArmor───────────────────────────────────────────────────────── [Change...↓] [ Back ][Abort][ [Install] 1 Help F8 Back F9 Abort F10 Install[Install][Change...↓][Install][ Back ]- Warming Up Starting Installation... 9 Abort[ Help ]Help] Back] [Next] F10 Next[Back] F8 Back F9 Abort F10 Next[Next][Back]Package Installation 9 Aborterforming Installation ┌Actions performed:──────────────────────────────────────────────────────┐││││││││││││││││││││││││└────────────────────────────────────────────────────────────────────────┘Installing...0%Installing...0%[Next] F10 Next[Back] F8 Back F9 Abort F10 NextPreparing disks...──────────────────Media│Remaining│Packages│Time└────────────────────────────────────────────────────────────────────────┘┌Actions performed:──────────────────────────────────────────────────────┐[Next][Back]ackage Installation 9 Aborterforming Installation ┌────────────────────────────────────────────────────────────────────────┐│Media│Remaining│Packages│Time│││││││││└────────────────────────────────────────────────────────────────────────┘┌Actions performed:──────────────────────────────────────────────────────┐││││││││││└────────────────────────────────────────────────────────────────────────┘Installing...0%Preparing disks...0% 17Installing Packages...│ Remaining│Packages│ TimeTotal│ 1.543 GiB│ 806│ âŒopenSUSE-20210927-0│ 1.543 GiB│ 806│ âŒChecking file conflicts... 1 12 23 34 45 56% 67% 78 89 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.543 GiB│ 806│ âŒopenSUSE-20210927-0│ 1.543 GiB│ 806│ âŒ(Remaining: 1.543 GiB, 806 packages)Downloading apparmor-docs (download size 325.4 KiB)Downloading apparmor-docs (download size 325.4 KiB)0%Installing apparmor-docs-3.0.3-3.2.noarch.rpm (installed size 373.5 KiB)Installing apparmor-docs-3.0.3-3.2.noarch.rpm (installed size 373.5 KiB) 6 18 27 32 7 4 55% 64% 72 81 9 98 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.542 GiB│ 805│ âŒopenSUSE-20210927-0│ 1.542 GiB│ 805│ âŒ250%Downloading bash-doc (download size 559.3 KiB)Downloading bash-doc (download size 559.3 KiB)100%0%Installing bash-doc-5.1.8-1.1.noarch.rpm (installed size 1.94 MiB)Installing bash-doc-5.1.8-1.1.noarch.rpm (installed size 1.94 MiB) 6 11 6 21 6 31 6 41 47 52%7% 62% 7 72 8 83 8 94 9 100 1414140%Downloading boost-license1_77_0 (download size 74.9 KiB) Downloading boost-license1_77_0 (download size 74.9 KiB)100%0%Installing boost-license1_77_0-1.77.0-1.1.noarch.rpm (installed size 1.3 K
┬ │Installing boost-license1_77_0-1.77.0-1.1.noarch.rpm (installed size 1.3┮ 892%100 3330%Downloading branding-openSUSE (download size 12 KiB)│ │~ KiB)┬ │Downloading branding-openSUSE (download size 12 KiB)┮ 100%0%Installing branding-openSUSE-84.87.20200106-4.25.noarch.rpm (installed siz
│┬ │Installing branding-openSUSE-84.87.20200106-4.25.noarch.rpm (installed s┮ 7 1494%100 2220%Downloading btrfsprogs-udev-rules (download size 80.4 KiB)││ │~ize 1.6 KiB)┬ │Downloading btrfsprogs-udev-rules (download size 80.4 KiB)┮ 100%0%Installing btrfsprogs-udev-rules-5.14-1.1.noarch.rpm (installed size 387 B
│┬ │Installing btrfsprogs-udev-rules-5.14-1.1.noarch.rpm (installed size 387┮ 1784%100 1110%Downloading busybox-static (download size 1.02 MiB)││ │~ B)┬ │Downloading busybox-static (download size 1.02 MiB)┮ 100%0%Installing busybox-static-1.33.1-1.2.aarch64.rpm (installed size 2.16 MiB)
│┬ │Installing busybox-static-1.33.1-1.2.aarch64.rpm (installed size 2.16 Mi┮ 5 10 5 20 6 31 6 41 46 52%7% 62% 8 73 8 83 8 94 9 100 3803803800%Downloading compat-usrmerge-tools (download size 242.7 KiB)││ │~B)│ │Downloading compat-usrmerge-tools (download size 242.7 KiB) ─ 100%0%Installing compat-usrmerge-tools-84.87-4.1.aarch64.rpm (installed size 661
│ │Installing compat-usrmerge-tools-84.87-4.1.aarch64.rpm (installed size 6─ 9 15 20 5 30 9 44 4954% 9% 68 73 8 83 8 97 100 7997997990%Downloading coreutils-doc (download size 531.9 KiB)│ │~61.7 KiB)│ │Downloading coreutils-doc (download size 531.9 KiB)─ 100%0%Installing coreutils-doc-8.32-8.3.noarch.rpm (installed size 362.3 KiB)
│ │Installing coreutils-doc-8.32-8.3.noarch.rpm (installed size 362.3 KiB) ─ 8 16 25 33 42 509% 64 9 74 9 84 9 94 9 100 7878780%Downloading cracklib-dict-full (download size 3.23 MiB)
│ │Downloading cracklib-dict-full (download size 3.23 MiB)─ 100%0%Installing cracklib-dict-full-2.8.12-66.6.aarch64.rpm (installed size 10.4
│ │Installing cracklib-dict-full-2.8.12-66.6.aarch64.rpm (installed size 10─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 2727270%Downloading distribution-logos-openSUSE-Tumbleweed (download size 28.4 KiB│ │~.46 MiB)│ │Downloading distribution-logos-openSUSE-Tumbleweed (download size 28.4 K─ 100%0%Installing distribution-logos-openSUSE-Tumbleweed-20201117-3.1.noarch.rpm │ │~iB)│ │Installing distribution-logos-openSUSE-Tumbleweed-20201117-3.1.noarch.rp─ 47 78%84 93 9 100 6660%Downloading file-magic (download size 565.1 KiB)│ │~m (installed size 67.1 KiB)│ │Downloading file-magic (download size 565.1 KiB)─ 100%0%Installing file-magic-5.40-1.8.noarch.rpm (installed size 7.91 MiB)
│ │Installing file-magic-5.40-1.8.noarch.rpm (installed size 7.91 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 1951951950%Downloading hicolor-icon-theme (download size 44.5 KiB)
│ │Downloading hicolor-icon-theme (download size 44.5 KiB)─ 100%0%Installing hicolor-icon-theme-0.17-3.5.noarch.rpm (installed size 76.7 KiB
│ │Installing hicolor-icon-theme-0.17-3.5.noarch.rpm (installed size 76.7 K─ 5 10 5 20 5 30 5 40 66% 83 99 100 4440%Downloading info-std (download size 76.2 KiB)│ │~iB)│ │Downloading info-std (download size 76.2 KiB)─ 100%0%Installing info-std-6.7-2.10.noarch.rpm (installed size 29.3 KiB)
│ │Installing info-std-6.7-2.10.noarch.rpm (installed size 29.3 KiB) ─ 99%100 3330%Downloading kbd-legacy (download size 570.4 KiB)
│ │Downloading kbd-legacy (download size 570.4 KiB)─ 100%0%Installing kbd-legacy-2.4.0-3.1.noarch.rpm (installed size 560.2 KiB)
│ │Installing kbd-legacy-2.4.0-3.1.noarch.rpm (installed size 560.2 KiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 2220%Downloading libX11-data (download size 165.1 KiB)
│ │Downloading libX11-data (download size 165.1 KiB)─ 100%0%Installing libX11-data-1.7.2-1.1.noarch.rpm (installed size 1.22 MiB)
│ │Installing libX11-data-1.7.2-1.1.noarch.rpm (installed size 1.22 MiB) ─ 7 12 7 22 7 34 9 44 4954% 9% 64 70 5 80 7 93 8 100 8181810%Downloading libicu69-ledata (download size 7.84 MiB)
│ │Downloading libicu69-ledata (download size 7.84 MiB)─ 100%0%Installing libicu69-ledata-69.1-2.2.noarch.rpm (installed size 27.34 MiB)
│ │Installing libicu69-ledata-69.1-2.2.noarch.rpm (installed size 27.34 MiB─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 49104910 949100%Downloading libldap-data (download size 115.2 KiB)│ │~)│ │Downloading libldap-data (download size 115.2 KiB)─ 100%0%Installing libldap-data-2.4.59-69.2.noarch.rpm (installed size 6.8 KiB)
│ │Installing libldap-data-2.4.59-69.2.noarch.rpm (installed size 6.8 KiB) ─ 5 1098%100 8989890%Downloading libnl-config (download size 17.4 KiB)
│ │Downloading libnl-config (download size 17.4 KiB)─ 100%0%Installing libnl-config-3.5.0-3.1.noarch.rpm (installed size 2.6 KiB)
│ │Installing libnl-config-3.5.0-3.1.noarch.rpm (installed size 2.6 KiB) ─ 43 96%100 8880%Downloading libsemanage-conf (download size 19.8 KiB)
│ │Downloading libsemanage-conf (download size 19.8 KiB)─ 100%0%Installing libsemanage-conf-3.2-2.1.aarch64.rpm (installed size 2.3 KiB)
│ │Installing libsemanage-conf-3.2-2.1.aarch64.rpm (installed size 2.3 KiB)─ 95%100 7770%Downloading libssh-config (download size 33.7 KiB)
│ │Downloading libssh-config (download size 33.7 KiB)─ 100%0%Installing libssh-config-0.9.6-1.1.aarch64.rpm (installed size 159 B)
│ │Installing libssh-config-0.9.6-1.1.aarch64.rpm (installed size 159 B) ─ 174982%1006660%Downloading libstorage-ng-lang (download size 302.7 KiB)
│ │Downloading libstorage-ng-lang (download size 302.7 KiB)─ 100%0%Installing libstorage-ng-lang-4.4.37-1.1.noarch.rpm (installed size 994.8
│ │Installing libstorage-ng-lang-4.4.37-1.1.noarch.rpm (installed size 994.─ 8 13 8 23 8 33 8 46 516% 61% 6 73 8 83 8 94 9 100 0505050%Downloading libthai-data (download size 187.4 KiB)│ │~8 KiB)│ │Downloading libthai-data (download size 187.4 KiB)─ 100%0%Installing libthai-data-0.1.28-1.4.aarch64.rpm (installed size 565.7 KiB)
│ │Installing libthai-data-0.1.28-1.4.aarch64.rpm (installed size 565.7 KiB─ 5 11 7 22 8 33 9 45 506% 62% 7 73 9 84 90 6 100 8948948940%Downloading libtirpc-netconfig (download size 29.4 KiB)│ │~)│ │Downloading libtirpc-netconfig (download size 29.4 KiB)─ 100%0%Installing libtirpc-netconfig-1.3.2-2.1.aarch64.rpm (installed size 2 KiB)
│ │Installing libtirpc-netconfig-1.3.2-2.1.aarch64.rpm (installed size 2 Ki─ 37 94%100 3330%Downloading lifecycle-data-openSUSE (download size 8.4 KiB)│ │~B)│ │Downloading lifecycle-data-openSUSE (download size 8.4 KiB) ─ 100%0%Installing lifecycle-data-openSUSE-1-5.6.noarch.rpm (installed size 1.7 Ki
│ │Installing lifecycle-data-openSUSE-1-5.6.noarch.rpm (installed size 1.7 ─ 5 1194%100 2220%Downloading man-pages (download size 3.57 MiB)│ │~KiB)│ │Downloading man-pages (download size 3.57 MiB)─ 100%0%Installing man-pages-5.13-1.1.noarch.rpm (installed size 4.54 MiB)
│ │Installing man-pages-5.13-1.1.noarch.rpm (installed size 4.54 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 5151510%Downloading man-pages-posix (download size 2.69 MiB)
│ │Downloading man-pages-posix (download size 2.69 MiB)─ 100%0%Installing man-pages-posix-2017a-1.3.noarch.rpm (installed size 2.59 MiB)
│ │Installing man-pages-posix-2017a-1.3.noarch.rpm (installed size 2.59 MiB─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 2020200%Downloading openSUSE-build-key (download size 25.8 KiB)│ │~)│ │Downloading openSUSE-build-key (download size 25.8 KiB)─ 100%0%Installing openSUSE-build-key-1.0-40.1.aarch64.rpm (installed size 20.2 Ki
│ │Installing openSUSE-build-key-1.0-40.1.aarch64.rpm (installed size 20.2 ─ 9 15 20 6 31 72%99100 7979790%Downloading openSUSE-release-appliance-custom (download size 7.6 KiB) │ │~KiB)│ │Downloading openSUSE-release-appliance-custom (download size 7.6 KiB) ─ 100%0%Installing openSUSE-release-appliance-custom-20210927-818.1.aarch64.rpm (i
│ │Installing openSUSE-release-appliance-custom-20210927-818.1.aarch64.rpm ─ 31 77%1008880%Downloading pam-doc (download size 514.8 KiB)│ │~(installed size 79 B)│ │Downloading pam-doc (download size 514.8 KiB)─ 100%0%Installing pam-doc-1.5.2-1.1.noarch.rpm (installed size 1.60 MiB)
│ │Installing pam-doc-1.5.2-1.1.noarch.rpm (installed size 1.60 MiB) ─ 5 10 5 21 6 31 6 41 46 516% 61% 6 71 6 82 8 93 9 100 1717170%Downloading pkgconf-m4 (download size 19.8 KiB)
│ │Downloading pkgconf-m4 (download size 19.8 KiB)─ 100%0%Installing pkgconf-m4-1.8.0-1.1.noarch.rpm (installed size 13.9 KiB)
│ │Installing pkgconf-m4-1.8.0-1.1.noarch.rpm (installed size 13.9 KiB) ─ 87%99 100 6660%Downloading publicsuffix (download size 150.5 KiB)
│ │Downloading publicsuffix (download size 150.5 KiB)─ 100%0%Installing publicsuffix-20210908-1.1.noarch.rpm (installed size 298.3 KiB)
│ │Installing publicsuffix-20210908-1.1.noarch.rpm (installed size 298.3 Ki─ 5 16 22 33 44 54% 65% 76 87 9 100 5550%Downloading readline-doc (download size 317.2 KiB)│ │~B)│ │Downloading readline-doc (download size 317.2 KiB)─ 100%0%Installing readline-doc-8.1-2.8.noarch.rpm (installed size 875.4 KiB)
│ │Installing readline-doc-8.1-2.8.noarch.rpm (installed size 875.4 KiB) ─ 7 12 7 22 9 37 44 518% 66% 71 8 85 91 7 100 0404040%Downloading shared-python-startup (download size 13 KiB)
│ │Downloading shared-python-startup (download size 13 KiB)─ 100%0%Installing shared-python-startup-0.1-6.4.noarch.rpm (installed size 13.5 K
│ │Installing shared-python-startup-0.1-6.4.noarch.rpm (installed size 13.5─ 999%100 3330%Downloading snmp-mibs (download size 276.2 KiB)│ │~ KiB)│ │Downloading snmp-mibs (download size 276.2 KiB)─ 100%0%Installing snmp-mibs-5.9-3.2.aarch64.rpm (installed size 1.66 MiB)
│ │Installing snmp-mibs-5.9-3.2.aarch64.rpm (installed size 1.66 MiB) ─ 5 11 6 21 6 31 6 42 47 52%7% 62% 8 73 8 83 8 93 8 100 7827827820%Downloading system-user-root (download size 8.5 KiB)
│ │Downloading system-user-root (download size 8.5 KiB)─ 100%0%Installing system-user-root-20190513-1.23.noarch.rpm (installed size 186 B
│ │Installing system-user-root-20190513-1.23.noarch.rpm (installed size 186─ 73%1001110%Downloading systemd-doc (download size 1.27 MiB)│ │~ B)│ │Downloading systemd-doc (download size 1.27 MiB)─ 100%0%Installing systemd-doc-249.4-2.2.aarch64.rpm (installed size 8.19 MiB)
│ │Installing systemd-doc-249.4-2.2.aarch64.rpm (installed size 8.19 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 0000000%Downloading unzip-doc (download size 156.4 KiB)
│ │Downloading unzip-doc (download size 156.4 KiB)─ 100%0%Installing unzip-doc-6.00-39.1.noarch.rpm (installed size 402.2 KiB)
│ │Installing unzip-doc-6.00-39.1.noarch.rpm (installed size 402.2 KiB) ─ 1 8 23 8 35 47 55% 61% 7 75 81 9 6 100 6969690%Downloading vim-data-common (download size 613.3 KiB)
│ │Downloading vim-data-common (download size 613.3 KiB)─ 100%0%Installing vim-data-common-8.2.3408-1.2.noarch.rpm (installed size 414.5 K
│ │Installing vim-data-common-8.2.3408-1.2.noarch.rpm (installed size 414.5─ 5 14 22 31 4 4956% 66% 77 89 97 100 6986986980%Downloading wireless-regdb (download size 20.1 KiB)│ │~ KiB)│ │Downloading wireless-regdb (download size 20.1 KiB)─ 100%0%Installing wireless-regdb-20210421-1.2.noarch.rpm (installed size 13.9 KiB
│ │Installing wireless-regdb-20210421-1.2.noarch.rpm (installed size 13.9 K─ 540 66% 74 85 93 9 100 7770%Downloading xbitmaps (download size 33.7 KiB)│ │~iB)│ │Downloading xbitmaps (download size 33.7 KiB)─ 100%0%Installing xbitmaps-1.1.2-1.6.noarch.rpm (installed size 176.3 KiB)
│ │Installing xbitmaps-1.1.2-1.6.noarch.rpm (installed size 176.3 KiB) ─ 2 5 30 41 46 52%73%90 9 100 6660%Downloading yast2-alternatives (download size 24 KiB)
│ │Downloading yast2-alternatives (download size 24 KiB)─ 100%0%Installing yast2-alternatives-4.3.1-1.3.aarch64.rpm (installed size 39.2 K
│ │Installing yast2-alternatives-4.3.1-1.3.aarch64.rpm (installed size 39.2─ 12 7 22 31 46 516% 97%100 5550%Downloading yast2-nfs-common (download size 23 KiB)│ │~ KiB)│ │Downloading yast2-nfs-common (download size 23 KiB)─ 100%0%Installing yast2-nfs-common-4.4.2-1.1.noarch.rpm (installed size 1 KiB)
│ │Installing yast2-nfs-common-4.4.2-1.1.noarch.rpm (installed size 1 KiB) ─ 2191%100 4440%Downloading yast2-trans-stats (download size 8 KiB)
│ │Downloading yast2-trans-stats (download size 8 KiB)─ 100%0%Installing yast2-trans-stats-2.19.0-17.15.noarch.rpm (installed size 4 B)
│ │Installing yast2-trans-stats-2.19.0-17.15.noarch.rpm (installed size 4 B─ 234876%1003330%Downloading systemd-icon-branding-openSUSE (download size 24.2 KiB) │ │~)│ │Downloading systemd-icon-branding-openSUSE (download size 24.2 KiB) ─ 100%0%Installing systemd-icon-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (
│ │Installing systemd-icon-branding-openSUSE-84.87.20200106-4.25.noarch.rpm─ 1 21 32 4961% 72 90 10 2220%Downloading filesystem (download size 66.5 KiB)│ │~ (installed size 115 B)│ │Downloading filesystem (download size 66.5 KiB)─ 100%0%Installing filesystem-84.87-2.1.aarch64.rpm (installed size 584 B)
│ │Installing filesystem-84.87-2.1.aarch64.rpm (installed size 584 B) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 1110%Downloading glibc (download size 1.56 MiB)
│ │Downloading glibc (download size 1.56 MiB)─ 100%0%Installing glibc-2.34-1.1.aarch64.rpm (installed size 5.67 MiB)
│ │Installing glibc-2.34-1.1.aarch64.rpm (installed size 5.67 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 404020400%Downloading libpcre2-8-0 (download size 389.8 KiB)
│ │Downloading libpcre2-8-0 (download size 389.8 KiB)─ 100%0%Installing libpcre2-8-0-10.37-1.1.aarch64.rpm (installed size 816.3 KiB)
│ │Installing libpcre2-8-0-10.37-1.1.aarch64.rpm (installed size 816.3 KiB)─ 7 15 23 31 9 46 54% 62% 70 8 86 92 8 100 3593593590%Downloading libselinux1 (download size 94.3 KiB)
│ │Downloading libselinux1 (download size 94.3 KiB)─ 100%0%Installing libselinux1-3.2-3.1.aarch64.rpm (installed size 196.1 KiB)
│ │Installing libselinux1-3.2-3.1.aarch64.rpm (installed size 196.1 KiB) ─ 16 32 4865% 81 97 100 8880%Downloading glibc-extra (download size 216.3 KiB)
│ │Downloading glibc-extra (download size 216.3 KiB)─ 100%0%Installing glibc-extra-2.34-1.1.aarch64.rpm (installed size 71.5 KiB)
│ │Installing glibc-extra-2.34-1.1.aarch64.rpm (installed size 71.5 KiB) ─ 44 89%9 100 7770%Downloading vlan (download size 38.5 KiB)
│ │Downloading vlan (download size 38.5 KiB)─ 100%0%Installing vlan-1.9-141.4.aarch64.rpm (installed size 148 KiB)
│ │Installing vlan-1.9-141.4.aarch64.rpm (installed size 148 KiB) ─ 21 42 54% 76%81 93 9 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.462 GiB│ 756│ âŒopenSUSE-20210927-0│ 1.462 GiB│ 756│ âŒ260%Downloading update-alternatives (download size 123.7 KiB)
│ │Downloading update-alternatives (download size 123.7 KiB)─ 100%0%Installing update-alternatives-1.20.9-1.1.aarch64.rpm (installed size 90.8
│ │Installing update-alternatives-1.20.9-1.1.aarch64.rpm (installed size 90─ 35 70% 929 100 5550%Downloading prctl (download size 22.2 KiB)│ │~.8 KiB)│ │Downloading prctl (download size 22.2 KiB)─ 100%0%Installing prctl-1.6-4.19.aarch64.rpm (installed size 87.2 KiB)
│ │Installing prctl-1.6-4.19.aarch64.rpm (installed size 87.2 KiB) ─ 36 72%96100 4440%Downloading mpt-status (download size 34.1 KiB)
│ │Downloading mpt-status (download size 34.1 KiB)─ 100%0%Installing mpt-status-1.2.0-194.6.aarch64.rpm (installed size 111 KiB)
│ │Installing mpt-status-1.2.0-194.6.aarch64.rpm (installed size 111 KiB) ─ 2856% 68% 74 81 98 100 3330%Downloading mozilla-nspr (download size 118.9 KiB)
│ │Downloading mozilla-nspr (download size 118.9 KiB)─ 100%0%Installing mozilla-nspr-4.32-1.1.aarch64.rpm (installed size 395.4 KiB)
│ │Installing mozilla-nspr-4.32-1.1.aarch64.rpm (installed size 395.4 KiB) ─ 8 16 24 32 40 4856% 64% 7 82 91 9 100 2220%Downloading lsscsi (download size 64.5 KiB)
│ │Downloading lsscsi (download size 64.5 KiB)─ 100%0%Installing lsscsi-0.30-1.10.aarch64.rpm (installed size 165.5 KiB)
│ │Installing lsscsi-0.30-1.10.aarch64.rpm (installed size 165.5 KiB) ─ 1938 57% 76%83 94 9 100 1110%Downloading lsof (download size 340.8 KiB)
│ │Downloading lsof (download size 340.8 KiB)─ 100%0%Installing lsof-4.94.0-1.1.aarch64.rpm (installed size 1.02 MiB)
│ │Installing lsof-4.94.0-1.1.aarch64.rpm (installed size 1.02 MiB) ─ 6 12 8 25 31 7 43 4955% 61% 7 72 8 84 90 5 100 1010100%Downloading libzstd1 (download size 377.2 KiB)
│ │Downloading libzstd1 (download size 377.2 KiB)─ 100%0%Installing libzstd1-1.5.0-1.8.aarch64.rpm (installed size 918.2 KiB)
│ │Installing libzstd1-1.5.0-1.8.aarch64.rpm (installed size 918.2 KiB) ─ 6 13 20 7 34 41 4855% 62% 9 76 83 90 7 100 0490490490%Downloading libz1 (download size 74.4 KiB)
│ │Downloading libz1 (download size 74.4 KiB)─ 100%0%Installing libz1-1.2.11-18.10.aarch64.rpm (installed size 148.1 KiB)
│ │Installing libz1-1.2.11-18.10.aarch64.rpm (installed size 148.1 KiB) ─ 21 43 64% 8699 100 8880%Downloading libyaml-0-2 (download size 57.5 KiB)
│ │Downloading libyaml-0-2 (download size 57.5 KiB)─ 100%0%Installing libyaml-0-2-0.2.5-1.5.aarch64.rpm (installed size 130.3 KiB)
│ │Installing libyaml-0-2-0.2.5-1.5.aarch64.rpm (installed size 130.3 KiB) ─ 244973%98100 5975975970%Downloading libxxhash0 (download size 30.6 KiB)
│ │Downloading libxxhash0 (download size 30.6 KiB)─ 100%0%Installing libxxhash0-0.8.0-2.1.aarch64.rpm (installed size 66 KiB)
│ │Installing libxxhash0-0.8.0-2.1.aarch64.rpm (installed size 66 KiB) ─ 4896%100 6660%Downloading libxtables12 (download size 56.2 KiB)
│ │Downloading libxtables12 (download size 56.2 KiB)─ 100%0%Installing libxtables12-1.8.7-1.3.aarch64.rpm (installed size 67 KiB)
│ │Installing libxtables12-1.8.7-1.3.aarch64.rpm (installed size 67 KiB) ─ 47 95%100 5550%Downloading libwrap0 (download size 29.2 KiB)
│ │Downloading libwrap0 (download size 29.2 KiB)─ 100%0%Installing libwrap0-7.6-892.11.aarch64.rpm (installed size 68.7 KiB)
│ │Installing libwrap0-7.6-892.11.aarch64.rpm (installed size 68.7 KiB) ─ 46 92%8 100 4440%Downloading libverto1 (download size 20 KiB)
│ │Downloading libverto1 (download size 20 KiB)─ 100%0%Installing libverto1-0.3.1-1.11.aarch64.rpm (installed size 69.4 KiB)
│ │Installing libverto1-0.3.1-1.11.aarch64.rpm (installed size 69.4 KiB) ─ 45 90%6 100 3330%Downloading libuv1 (download size 124.7 KiB)
│ │Downloading libuv1 (download size 124.7 KiB)─ 100%0%Installing libuv1-1.42.0-1.1.aarch64.rpm (installed size 199.3 KiB)
│ │Installing libuv1-1.42.0-1.1.aarch64.rpm (installed size 199.3 KiB) ─ 16 32 4864% 80 96 100 2220%Downloading libuuid1 (download size 150.2 KiB)
│ │Downloading libuuid1 (download size 150.2 KiB)─ 100%0%Installing libuuid1-2.36.2-3.1.aarch64.rpm (installed size 66.1 KiB)
│ │Installing libuuid1-2.36.2-3.1.aarch64.rpm (installed size 66.1 KiB) ─ 4896%100 1110%Downloading liburing2 (download size 32.6 KiB)
│ │Downloading liburing2 (download size 32.6 KiB)─ 100%0%Installing liburing2-2.0-1.2.aarch64.rpm (installed size 110.7 KiB)
│ │Installing liburing2-2.0-1.2.aarch64.rpm (installed size 110.7 KiB) ─ 2857% 82%98 100 0000%Downloading liburcu6 (download size 105.8 KiB)
│ │Downloading liburcu6 (download size 105.8 KiB)─ 100%0%Installing liburcu6-0.12.2-1.2.aarch64.rpm (installed size 645 KiB)
│ │Installing liburcu6-0.12.2-1.2.aarch64.rpm (installed size 645 KiB) ─ 9 15 20 5 30 5 40 46 516% 61% 6 71 7 82 7 93 8 100 8398398390%Downloading libunistring2 (download size 485.6 KiB)
│ │Downloading libunistring2 (download size 485.6 KiB)─ 100%0%Installing libunistring2-0.9.10-2.9.aarch64.rpm (installed size 1.54 MiB)
│ │Installing libunistring2-0.9.10-2.9.aarch64.rpm (installed size 1.54 MiB─ 6 12 8 24 30 6 42 4854% 60% 6 72 8 84 90 5 100 7878780%Downloading libudev1 (download size 454 KiB)│ │~)│ │Downloading libudev1 (download size 454 KiB)─ 100%0%Installing libudev1-249.4-2.2.aarch64.rpm (installed size 194.5 KiB)
│ │Installing libudev1-249.4-2.2.aarch64.rpm (installed size 194.5 KiB) ─ 16 32 4965% 82 98 100 7770%Downloading libtss2-rc0 (download size 31 KiB)
│ │Downloading libtss2-rc0 (download size 31 KiB)─ 100%0%Installing libtss2-rc0-3.1.0-1.1.aarch64.rpm (installed size 75.1 KiB)
│ │Installing libtss2-rc0-3.1.0-1.1.aarch64.rpm (installed size 75.1 KiB) ─ 42 85%99 100 6666660%Downloading libtss2-mu0 (download size 72.2 KiB)
│ │Downloading libtss2-mu0 (download size 72.2 KiB)─ 100%0%Installing libtss2-mu0-3.1.0-1.1.aarch64.rpm (installed size 323.5 KiB)
│ │Installing libtss2-mu0-3.1.0-1.1.aarch64.rpm (installed size 323.5 KiB) ─ 9 1 2 3 459% 6 7 88 9 100 5550%Downloading libtextstyle0 (download size 288 KiB)
│ │Downloading libtextstyle0 (download size 288 KiB)─ 100%0%Installing libtextstyle0-0.21-2.10.aarch64.rpm (installed size 644.4 KiB)
│ │Installing libtextstyle0-0.21-2.10.aarch64.rpm (installed size 644.4 KiB─ 5 14 9 24 9 34 9 44 4954% 9% 64 9 74 9 84 9 94 9 100 4440%Downloading libtdb1 (download size 58.3 KiB)│ │~)│ │Downloading libtdb1 (download size 58.3 KiB)─ 100%0%Installing libtdb1-1.4.3-1.6.aarch64.rpm (installed size 130.8 KiB)
│ │Installing libtdb1-1.4.3-1.6.aarch64.rpm (installed size 130.8 KiB) ─ 244973%97100 5353530%Downloading libtasn1-6 (download size 69.4 KiB)
│ │Downloading libtasn1-6 (download size 69.4 KiB)─ 100%0%Installing libtasn1-6-4.17.0-1.1.aarch64.rpm (installed size 156.5 KiB)
│ │Installing libtasn1-6-4.17.0-1.1.aarch64.rpm (installed size 156.5 KiB) ─ 24 61% 899100 2220%Downloading libtalloc2 (download size 34.7 KiB)
│ │Downloading libtalloc2 (download size 34.7 KiB)─ 100%0%Installing libtalloc2-2.3.3-1.1.aarch64.rpm (installed size 66.5 KiB)
│ │Installing libtalloc2-2.3.3-1.1.aarch64.rpm (installed size 66.5 KiB) ─ 4896%100 1110%Downloading libsqlite3-0 (download size 751.5 KiB)
│ │Downloading libsqlite3-0 (download size 751.5 KiB)─ 100%0%Installing libsqlite3-0-3.36.0-1.1.aarch64.rpm (installed size 1.33 MiB)
│ │Installing libsqlite3-0-3.36.0-1.1.aarch64.rpm (installed size 1.33 MiB)─ 7 14 21 8 35 42 4954% 61% 8 75 82 9 96 100 4040400%Downloading libsmputils1-1 (download size 28 KiB)
│ │Downloading libsmputils1-1 (download size 28 KiB)─ 100%0%Installing libsmputils1-1-0.99-2.3.aarch64.rpm (installed size 67.5 KiB)
│ │Installing libsmputils1-1-0.99-2.3.aarch64.rpm (installed size 67.5 KiB)─ 47 94%9 100 2929290%Downloading libsmartcols1 (download size 175.1 KiB)
│ │Downloading libsmartcols1 (download size 175.1 KiB)─ 100%0%Installing libsmartcols1-2.36.2-3.1.aarch64.rpm (installed size 130.1 KiB)
│ │Installing libsmartcols1-2.36.2-3.1.aarch64.rpm (installed size 130.1 Ki─ 244973%98100 8880%Downloading libsgutils2-1_46-2 (download size 125.8 KiB)│ │~B)│ │Downloading libsgutils2-1_46-2 (download size 125.8 KiB)─ 100%0%Installing libsgutils2-1_46-2-1.46-1.2.aarch64.rpm (installed size 283.3 K
│ │Installing libsgutils2-1_46-2-1.46-1.2.aarch64.rpm (installed size 283.3─ 11 22 33 45 56% 67% 79 90 9 100 3737370%Downloading libsepol2 (download size 280.4 KiB)│ │~ KiB)│ │Downloading libsepol2 (download size 280.4 KiB)─ 100%0%Installing libsepol2-3.2-3.1.aarch64.rpm (installed size 773.2 KiB)
│ │Installing libsepol2-3.2-3.1.aarch64.rpm (installed size 773.2 KiB) ─ 8 16 24 33 41 4957% 62% 70 8 86 91 9 100 6660%Downloading libsensors4 (download size 76 KiB)
│ │Downloading libsensors4 (download size 76 KiB)─ 100%0%Installing libsensors4-3.6.0-5.1.aarch64.rpm (installed size 109.3 KiB)
│ │Installing libsensors4-3.6.0-5.1.aarch64.rpm (installed size 109.3 KiB) ─ 938 67% 939 100 5550%Downloading libseccomp2 (download size 69.1 KiB)
│ │Downloading libseccomp2 (download size 69.1 KiB)─ 100%0%Installing libseccomp2-2.5.2-2.1.aarch64.rpm (installed size 154.2 KiB)
│ │Installing libseccomp2-2.5.2-2.1.aarch64.rpm (installed size 154.2 KiB) ─ 2 41 62% 899 100 2424240%Downloading libschily2_0 (download size 107 KiB)
│ │Downloading libschily2_0 (download size 107 KiB)─ 100%0%Installing libschily2_0-2021.09.01-44.1.aarch64.rpm (installed size 214.6
│ │Installing libschily2_0-2021.09.01-44.1.aarch64.rpm (installed size 214.─ 14 29 44 59% 74 89 9 100 3330%Downloading libsasl2-3 (download size 76.8 KiB)│ │~6 KiB)│ │Downloading libsasl2-3 (download size 76.8 KiB)─ 100%0%Installing libsasl2-3-2.1.27-5.4.aarch64.rpm (installed size 132 KiB)
│ │Installing libsasl2-3-2.1.27-5.4.aarch64.rpm (installed size 132 KiB) ─ 244872%96100 2220%Downloading libpopt0 (download size 59.8 KiB)
│ │Downloading libpopt0 (download size 59.8 KiB)─ 100%0%Installing libpopt0-1.18-2.9.aarch64.rpm (installed size 137.5 KiB)
│ │Installing libpopt0-1.18-2.9.aarch64.rpm (installed size 137.5 KiB) ─ 22 44 54% 60% 6 72 8 84 9 94 9 100 1110%Downloading libply-boot-client5 (download size 66.5 KiB)
│ │Downloading libply-boot-client5 (download size 66.5 KiB)─ 100%0%Installing libply-boot-client5-0.9.5~git20210406.e554475-1.1.aarch64.rpm (
│ │Installing libply-boot-client5-0.9.5~git20210406.e554475-1.1.aarch64.rpm─ 4896%100 0000%Downloading libpkgconf3 (download size 39 KiB)│ │~ (installed size 66.3 KiB)│ │Downloading libpkgconf3 (download size 39 KiB)─ 100%0%Installing libpkgconf3-1.8.0-1.1.aarch64.rpm (installed size 68.5 KiB)
│ │Installing libpkgconf3-1.8.0-1.1.aarch64.rpm (installed size 68.5 KiB) ─ 46 92%8 100 1919190%Downloading libpixman-1-0 (download size 174.5 KiB)
│ │Downloading libpixman-1-0 (download size 174.5 KiB)─ 100%0%Installing libpixman-1-0-0.40.0-1.6.aarch64.rpm (installed size 452.9 KiB)
│ │Installing libpixman-1-0-0.40.0-1.6.aarch64.rpm (installed size 452.9 Ki─ 7 14 21 8 35 42 4956% 63% 70 7 84 91 8 100 1818180%Downloading libpipeline1 (download size 28.1 KiB)│ │~B)│ │Downloading libpipeline1 (download size 28.1 KiB)─ 100%0%Installing libpipeline1-1.5.3-1.4.aarch64.rpm (installed size 66.7 KiB)
│ │Installing libpipeline1-1.5.3-1.4.aarch64.rpm (installed size 66.7 KiB) ─ 4895%100 7770%Downloading libpcre1 (download size 373.9 KiB)
│ │Downloading libpcre1 (download size 373.9 KiB)─ 100%0%Installing libpcre1-8.45-1.1.aarch64.rpm (installed size 884.3 KiB)
│ │Installing libpcre1-8.45-1.1.aarch64.rpm (installed size 884.3 KiB) ─ 7 14 21 8 36 43 507% 65% 72 9 87 94 9 100 6660%Downloading libopenjp2-7 (download size 152.7 KiB)
│ │Downloading libopenjp2-7 (download size 152.7 KiB)─ 100%0%Installing libopenjp2-7-2.4.0-1.2.aarch64.rpm (installed size 386 KiB)
│ │Installing libopenjp2-7-2.4.0-1.2.aarch64.rpm (installed size 386 KiB) ─ 8 16 24 33 41 4958% 66% 74 82 91 9 100 0505 1050%Downloading libnuma1 (download size 43.4 KiB)
│ │Downloading libnuma1 (download size 43.4 KiB)─ 100%0%Installing libnuma1-2.0.14.20.g4ee5e0c-1.1.aarch64.rpm (installed size 67.
│ │Installing libnuma1-2.0.14.20.g4ee5e0c-1.1.aarch64.rpm (installed size 6─ 47 95%100 4440%Downloading libnss_usrfiles2 (download size 27.8 KiB)│ │~7.2 KiB)│ │Downloading libnss_usrfiles2 (download size 27.8 KiB)─ 100%0%Installing libnss_usrfiles2-2.27-2.8.aarch64.rpm (installed size 93.4 KiB)
│ │Installing libnss_usrfiles2-2.27-2.8.aarch64.rpm (installed size 93.4 Ki─ 34 68% 99100 3330%Downloading libnscd1 (download size 21 KiB)│ │~B)│ │Downloading libnscd1 (download size 21 KiB)─ 100%0%Installing libnscd1-2.0.2-138.15.aarch64.rpm (installed size 92.7 KiB)
│ │Installing libnscd1-2.0.2-138.15.aarch64.rpm (installed size 92.7 KiB) ─ 34 68% 9100 2220%Downloading libnpth0 (download size 14.4 KiB)
│ │Downloading libnpth0 (download size 14.4 KiB)─ 100%0%Installing libnpth0-1.6-2.4.aarch64.rpm (installed size 66.5 KiB)
│ │Installing libnpth0-1.6-2.4.aarch64.rpm (installed size 66.5 KiB) ─ 4896%100 1110%Downloading libnl3-200 (download size 314.3 KiB)
│ │Downloading libnl3-200 (download size 314.3 KiB)─ 100%0%Installing libnl3-200-3.5.0-3.1.aarch64.rpm (installed size 1.82 MiB)
│ │Installing libnl3-200-3.5.0-3.1.aarch64.rpm (installed size 1.82 MiB) ─ 5 10 5 21 6 32 7 42 47 52%7% 62% 7 73 8 83 9 94 9 100 4804804800%Downloading libnghttp2-14 (download size 125.4 KiB)
│ │Downloading libnghttp2-14 (download size 125.4 KiB)─ 100%0%Installing libnghttp2-14-1.43.0-1.3.aarch64.rpm (installed size 195.6 KiB)
│ │Installing libnghttp2-14-1.43.0-1.3.aarch64.rpm (installed size 195.6 Ki─ 16 32 4965% 81 97 100 0909090%Downloading libnfsidmap1 (download size 79.5 KiB)│ │~B)│ │Downloading libnfsidmap1 (download size 79.5 KiB)─ 100%0%Installing libnfsidmap1-1.0-26.1.aarch64.rpm (installed size 265.5 KiB)
│ │Installing libnfsidmap1-1.0-26.1.aarch64.rpm (installed size 265.5 KiB) ─ 12 24 37 4962% 74 87 99 100 8880%Downloading libnfnetlink0 (download size 28.7 KiB)
│ │Downloading libnfnetlink0 (download size 28.7 KiB)─ 100%0%Installing libnfnetlink0-1.0.1-12.4.aarch64.rpm (installed size 85 KiB)
│ │Installing libnfnetlink0-1.0.1-12.4.aarch64.rpm (installed size 85 KiB) ─ 37 74%9 9100 7770%Downloading libnettle8 (download size 176.3 KiB)
│ │Downloading libnettle8 (download size 176.3 KiB)─ 100%0%Installing libnettle8-3.7.3-1.1.aarch64.rpm (installed size 383.2 KiB)
│ │Installing libnettle8-3.7.3-1.1.aarch64.rpm (installed size 383.2 KiB) ─ 8 16 25 33 41 508% 66% 75 83 90 9 100 7676760%Downloading libnetpbm11 (download size 140.2 KiB)
│ │Downloading libnetpbm11 (download size 140.2 KiB)─ 100%0%Installing libnetpbm11-10.93.0-1.3.aarch64.rpm (installed size 337.2 KiB)
│ │Installing libnetpbm11-10.93.0-1.3.aarch64.rpm (installed size 337.2 KiB─ 9 1 28 3 47 56% 66% 75 8 94 9 100 5550%Downloading libmpdec3 (download size 83.6 KiB)│ │~)│ │Downloading libmpdec3 (download size 83.6 KiB)─ 100%0%Installing libmpdec3-2.5.1-2.1.aarch64.rpm (installed size 197 KiB)
│ │Installing libmpdec3-2.5.1-2.1.aarch64.rpm (installed size 197 KiB) ─ 16 32 4864% 81 97 100 4440%Downloading libmnl0 (download size 26.3 KiB)
│ │Downloading libmnl0 (download size 26.3 KiB)─ 100%0%Installing libmnl0-1.0.4-2.6.aarch64.rpm (installed size 92.3 KiB)
│ │Installing libmnl0-1.0.4-2.6.aarch64.rpm (installed size 92.3 KiB) ─ 34 69% 9100 3330%Downloading liblzo2-2 (download size 60.4 KiB)
│ │Downloading liblzo2-2 (download size 60.4 KiB)─ 100%0%Installing liblzo2-2-2.10-7.3.aarch64.rpm (installed size 147.9 KiB)
│ │Installing liblzo2-2-2.10-7.3.aarch64.rpm (installed size 147.9 KiB) ─ 21 43 64% 8699 100 6262620%Downloading liblzma5 (download size 131 KiB)
│ │Downloading liblzma5 (download size 131 KiB)─ 100%0%Installing liblzma5-5.2.5-2.2.aarch64.rpm (installed size 194 KiB)
│ │Installing liblzma5-5.2.5-2.2.aarch64.rpm (installed size 194 KiB) ─ 16 33 4965% 82 98 100 1110%Downloading liblz4-1 (download size 68.8 KiB)
│ │Downloading liblz4-1 (download size 68.8 KiB)─ 100%0%Installing liblz4-1-1.9.3-1.3.aarch64.rpm (installed size 130.4 KiB)
│ │Installing liblz4-1-1.9.3-1.3.aarch64.rpm (installed size 130.4 KiB) ─ 244973%98100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.446 GiB│ 700│ 24:31openSUSE-20210927-0│ 1.446 GiB│ 700│ 24:31 / 24:31, 700 packages)0%Downloading liblua5_4-5 (download size 130.7 KiB)
│ │Downloading liblua5_4-5 (download size 130.7 KiB)─ 100%0%Installing liblua5_4-5-5.4.3-4.1.aarch64.rpm (installed size 323.9 KiB)
│ │Installing liblua5_4-5-5.4.3-4.1.aarch64.rpm (installed size 323.9 KiB) ─ 1 9 2 3 459% 6 7 88 9 100 699069900, 6990%Downloading liblmdb-0_9_29 (download size 62.5 KiB)
│ │Downloading liblmdb-0_9_29 (download size 62.5 KiB)─ 100%0%Installing liblmdb-0_9_29-0.9.29-1.2.aarch64.rpm (installed size 130.8 KiB
│ │Installing liblmdb-0_9_29-0.9.29-1.2.aarch64.rpm (installed size 130.8 K─ 244873%97100 8880%Downloading liblcms2-2 (download size 160.4 KiB)│ │~iB)│ │Downloading liblcms2-2 (download size 160.4 KiB)─ 100%0%Installing liblcms2-2-2.12-1.2.aarch64.rpm (installed size 399.1 KiB)
│ │Installing liblcms2-2-2.12-1.2.aarch64.rpm (installed size 399.1 KiB) ─ 8 16 24 32 40 4856% 64% 72 80 8 96 100 5757570%Downloading libkeyutils1 (download size 30 KiB)
│ │Downloading libkeyutils1 (download size 30 KiB)─ 100%0%Installing libkeyutils1-1.6.3-3.1.aarch64.rpm (installed size 92.2 KiB)
│ │Installing libkeyutils1-1.6.3-3.1.aarch64.rpm (installed size 92.2 KiB) ─ 34 69% 9100 6660%Downloading libjson-c5 (download size 47 KiB)
│ │Downloading libjson-c5 (download size 47 KiB)─ 100%0%Installing libjson-c5-0.15-2.2.aarch64.rpm (installed size 133 KiB)
│ │Installing libjson-c5-0.15-2.2.aarch64.rpm (installed size 133 KiB) ─ 244871%95100 5550%Downloading libjpeg8 (download size 207.5 KiB)
│ │Downloading libjpeg8 (download size 207.5 KiB)─ 100%0%Installing libjpeg8-8.2.2-65.1.aarch64.rpm (installed size 455.1 KiB)
│ │Installing libjpeg8-8.2.2-65.1.aarch64.rpm (installed size 455.1 KiB) ─ 7 14 21 8 35 42 4956% 63% 70 7 84 91 8 100 42942929, 6940%Downloading libjbig2 (download size 35.2 KiB)
│ │Downloading libjbig2 (download size 35.2 KiB)─ 100%0%Installing libjbig2-2.1-3.22.aarch64.rpm (installed size 143.1 KiB)
│ │Installing libjbig2-2.1-3.22.aarch64.rpm (installed size 143.1 KiB) ─ 22 44 53% 76%98100 3330%Downloading libjansson4 (download size 39.8 KiB)
│ │Downloading libjansson4 (download size 39.8 KiB)─ 100%0%Installing libjansson4-2.13.1-1.6.aarch64.rpm (installed size 66.4 KiB)
│ │Installing libjansson4-2.13.1-1.6.aarch64.rpm (installed size 66.4 KiB) ─ 4896%100 2220%Downloading libiw30 (download size 80.6 KiB)
│ │Downloading libiw30 (download size 80.6 KiB)─ 100%0%Installing libiw30-30.pre9-39.6.aarch64.rpm (installed size 66.5 KiB)
│ │Installing libiw30-30.pre9-39.6.aarch64.rpm (installed size 66.5 KiB) ─ 4896%100 4141410%Downloading libip6tc2 (download size 45.4 KiB)
│ │Downloading libip6tc2 (download size 45.4 KiB)─ 100%0%Installing libip6tc2-1.8.7-1.3.aarch64.rpm (installed size 66.8 KiB)
│ │Installing libip6tc2-1.8.7-1.3.aarch64.rpm (installed size 66.8 KiB) ─ 4895%100 0000%Downloading libip4tc2 (download size 45 KiB)
│ │Downloading libip4tc2 (download size 45 KiB)─ 100%0%Installing libip4tc2-1.8.7-1.3.aarch64.rpm (installed size 66.8 KiB)
│ │Installing libip4tc2-1.8.7-1.3.aarch64.rpm (installed size 66.8 KiB) ─ 4895%100 8989890%Downloading libhavege2 (download size 50.6 KiB)
│ │Downloading libhavege2 (download size 50.6 KiB)─ 100%0%Installing libhavege2-1.9.14-1.3.aarch64.rpm (installed size 164.5 KiB)
│ │Installing libhavege2-1.9.14-1.3.aarch64.rpm (installed size 164.5 KiB) ─ 1938 58% 77%98100 8880%Downloading libgraphite2-3 (download size 68.6 KiB)
│ │Downloading libgraphite2-3 (download size 68.6 KiB)─ 100%0%Installing libgraphite2-3-1.3.14-2.1.aarch64.rpm (installed size 130 KiB)
│ │Installing libgraphite2-3-1.3.14-2.1.aarch64.rpm (installed size 130 KiB─ 244973%98100 7770%Downloading libgpm2 (download size 33 KiB)│ │~)│ │Downloading libgpm2 (download size 33 KiB)─ 100%0%Installing libgpm2-1.20.7-18.8.aarch64.rpm (installed size 66.5 KiB)
│ │Installing libgpm2-1.20.7-18.8.aarch64.rpm (installed size 66.5 KiB) ─ 4896%100 6660%Downloading libgpg-error0 (download size 183.7 KiB)
│ │Downloading libgpg-error0 (download size 183.7 KiB)─ 100%0%Installing libgpg-error0-1.42-2.1.aarch64.rpm (installed size 700.2 KiB)
│ │Installing libgpg-error0-1.42-2.1.aarch64.rpm (installed size 700.2 KiB)─ 9 18 27 33 8 44 507% 66% 71 6 82 8 95 100 35835838, 6850%Downloading libgomp1 (download size 121 KiB)
│ │Downloading libgomp1 (download size 121 KiB)─ 100%0%Installing libgomp1-11.2.1+git610-1.1.aarch64.rpm (installed size 323.6 Ki
│ │Installing libgomp1-11.2.1+git610-1.1.aarch64.rpm (installed size 323.6 ─ 9 1 2 3 459% 6 7 88 9 100 4440%Downloading libgmp10 (download size 266.2 KiB)│ │~KiB)│ │Downloading libgmp10 (download size 266.2 KiB)─ 100%0%Installing libgmp10-6.2.1-3.8.aarch64.rpm (installed size 610.7 KiB)
│ │Installing libgmp10-6.2.1-3.8.aarch64.rpm (installed size 610.7 KiB) ─ 5 10 5 20 6 31 6 41 47 52%7% 62% 8 73 8 83 9 94 9 100 23723727, 6830%Downloading libgdbm6 (download size 57.7 KiB)
│ │Downloading libgdbm6 (download size 57.7 KiB)─ 100%0%Installing libgdbm6-1.20-1.1.aarch64.rpm (installed size 101.5 KiB)
│ │Installing libgdbm6-1.20-1.1.aarch64.rpm (installed size 101.5 KiB) ─ 31 62% 97100 2220%Downloading libgcc_s1 (download size 50.2 KiB)
│ │Downloading libgcc_s1 (download size 50.2 KiB)─ 100%0%Installing libgcc_s1-11.2.1+git610-1.1.aarch64.rpm (installed size 130.7 K
│ │Installing libgcc_s1-11.2.1+git610-1.1.aarch64.rpm (installed size 130.7─ 244873%97100 1110%Downloading libfuse2 (download size 87.8 KiB)│ │~ KiB)│ │Downloading libfuse2 (download size 87.8 KiB)─ 100%0%Installing libfuse2-2.9.9-5.1.aarch64.rpm (installed size 260.2 KiB)
│ │Installing libfuse2-2.9.9-5.1.aarch64.rpm (installed size 260.2 KiB) ─ 12 24 36 4961% 73 86 98 100 06066, 6800%Downloading libfribidi0 (download size 41.7 KiB)
│ │Downloading libfribidi0 (download size 41.7 KiB)─ 100%0%Installing libfribidi0-1.0.10-2.1.aarch64.rpm (installed size 156.2 KiB)
│ │Installing libfribidi0-1.0.10-2.1.aarch64.rpm (installed size 156.2 KiB)─ 24 61% 899100 7979790%Downloading libfreebl3 (download size 413.2 KiB)
│ │Downloading libfreebl3 (download size 413.2 KiB)─ 100%0%Installing libfreebl3-3.69.1-1.1.aarch64.rpm (installed size 708.7 KiB)
│ │Installing libfreebl3-3.69.1-1.1.aarch64.rpm (installed size 708.7 KiB) ─ 9 18 27 36 45 54% 9% 68 77 86 95 100 1818180%Downloading libffi8 (download size 26.3 KiB)
│ │Downloading libffi8 (download size 26.3 KiB)─ 100%0%Installing libffi8-3.3.git30-1.19.aarch64.rpm (installed size 67.6 KiB)
│ │Installing libffi8-3.3.git30-1.19.aarch64.rpm (installed size 67.6 KiB) ─ 47 94%9 100 7770%Downloading libexpat1 (download size 112.2 KiB)
│ │Downloading libexpat1 (download size 112.2 KiB)─ 100%0%Installing libexpat1-2.4.1-1.1.aarch64.rpm (installed size 194.3 KiB)
│ │Installing libexpat1-2.4.1-1.1.aarch64.rpm (installed size 194.3 KiB) ─ 16 33 4965% 82 98 100 65655, 6760%Downloading libefivar1 (download size 97.6 KiB)
│ │Downloading libefivar1 (download size 97.6 KiB)─ 100%0%Installing libefivar1-37-5.1.aarch64.rpm (installed size 298.2 KiB)
│ │Installing libefivar1-37-5.1.aarch64.rpm (installed size 298.2 KiB) ─ 1 21 32 4 54% 65% 76 8 97 100 5550%Downloading libeconf0 (download size 32.3 KiB)
│ │Downloading libeconf0 (download size 32.3 KiB)─ 100%0%Installing libeconf0-0.4.1+git20210709.cf671f2-1.1.aarch64.rpm (installed
│ │Installing libeconf0-0.4.1+git20210709.cf671f2-1.1.aarch64.rpm (installe─ 47 94%9 100 4440%Downloading libebtc0 (download size 67.2 KiB)│ │~d size 67.6 KiB)│ │Downloading libebtc0 (download size 67.2 KiB)─ 100%0%Installing libebtc0-2.0.11-4.4.aarch64.rpm (installed size 199.5 KiB)
│ │Installing libebtc0-2.0.11-4.4.aarch64.rpm (installed size 199.5 KiB) ─ 16 32 4864% 80 96 100 0303030%Downloading libdrm2 (download size 93.8 KiB)
│ │Downloading libdrm2 (download size 93.8 KiB)─ 100%0%Installing libdrm2-2.4.107-2.1.aarch64.rpm (installed size 130.9 KiB)
│ │Installing libdrm2-2.4.107-2.1.aarch64.rpm (installed size 130.9 KiB) ─ 244873%97100 2220%Downloading libdeflt1_0 (download size 54.3 KiB)
│ │Downloading libdeflt1_0 (download size 54.3 KiB)─ 100%0%Installing libdeflt1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.3 Ki
│ │Installing libdeflt1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.3 ─ 37 75%99100 1110%Downloading libdatrie1 (download size 51.2 KiB)│ │~KiB)│ │Downloading libdatrie1 (download size 51.2 KiB)─ 100%0%Installing libdatrie1-0.2.13-1.2.aarch64.rpm (installed size 168.8 KiB)
│ │Installing libdatrie1-0.2.13-1.2.aarch64.rpm (installed size 168.8 KiB) ─ 1837 58% 77%83 99 100 04044, 6700%Downloading libcrypt1 (download size 119.7 KiB)
│ │Downloading libcrypt1 (download size 119.7 KiB)─ 100%0%Installing libcrypt1-4.4.25-1.1.aarch64.rpm (installed size 260.4 KiB)
│ │Installing libcrypt1-4.4.25-1.1.aarch64.rpm (installed size 260.4 KiB) ─ 12 24 36 4861% 73 8 97 100 6969690%Downloading libcpupower0 (download size 29.3 KiB)
│ │Downloading libcpupower0 (download size 29.3 KiB)─ 100%0%Installing libcpupower0-5.14-2.1.aarch64.rpm (installed size 66.4 KiB)
│ │Installing libcpupower0-5.14-2.1.aarch64.rpm (installed size 66.4 KiB) ─ 4896%100 8880%Downloading libcom_err2 (download size 83 KiB)
│ │Downloading libcom_err2 (download size 83 KiB)─ 100%0%Installing libcom_err2-1.46.4-1.1.aarch64.rpm (installed size 133 KiB)
│ │Installing libcom_err2-1.46.4-1.1.aarch64.rpm (installed size 133 KiB) ─ 244874%97100 7770%Downloading libcbor0_8 (download size 55.9 KiB)
│ │Downloading libcbor0_8 (download size 55.9 KiB)─ 100%0%Installing libcbor0_8-0.8.0-1.4.aarch64.rpm (installed size 101.4 KiB)
│ │Installing libcbor0_8-0.8.0-1.4.aarch64.rpm (installed size 101.4 KiB) ─ 31 62% 71 7 99100 3963963960%Downloading libcap2 (download size 40.3 KiB)
│ │Downloading libcap2 (download size 40.3 KiB)─ 100%0%Installing libcap2-2.51-1.1.aarch64.rpm (installed size 86.4 KiB)
│ │Installing libcap2-2.51-1.1.aarch64.rpm (installed size 86.4 KiB) ─ 37 73%99100 5550%Downloading libcap-ng0 (download size 29 KiB)
│ │Downloading libcap-ng0 (download size 29 KiB)─ 100%0%Installing libcap-ng0-0.7.10-1.18.aarch64.rpm (installed size 92.4 KiB)
│ │Installing libcap-ng0-0.7.10-1.18.aarch64.rpm (installed size 92.4 KiB) ─ 34 69% 9100 4440%Downloading libbz2-1 (download size 72 KiB)
│ │Downloading libbz2-1 (download size 72 KiB)─ 100%0%Installing libbz2-1-1.0.8-3.1.aarch64.rpm (installed size 130.4 KiB)
│ │Installing libbz2-1-1.0.8-3.1.aarch64.rpm (installed size 130.4 KiB) ─ 244973%98100 3330%Downloading libbtrfs0 (download size 92 KiB)
│ │Downloading libbtrfs0 (download size 92 KiB)─ 100%0%Installing libbtrfs0-5.14-1.1.aarch64.rpm (installed size 66.4 KiB)
│ │Installing libbtrfs0-5.14-1.1.aarch64.rpm (installed size 66.4 KiB) ─ 4896%100 2220%Downloading libbsd0 (download size 105.9 KiB)
│ │Downloading libbsd0 (download size 105.9 KiB)─ 100%0%Installing libbsd0-0.10.0-2.1.aarch64.rpm (installed size 373 KiB)
│ │Installing libbsd0-0.10.0-2.1.aarch64.rpm (installed size 373 KiB) ─ 8 17 25 34 43 52%60% 9 78 86 93 9 100 13133, 6610%Downloading libbrotlicommon1 (download size 69.2 KiB)
│ │Downloading libbrotlicommon1 (download size 69.2 KiB)─ 100%0%Installing libbrotlicommon1-1.0.9-1.4.aarch64.rpm (installed size 130 KiB)
│ │Installing libbrotlicommon1-1.0.9-1.4.aarch64.rpm (installed size 130 Ki─ 244973%98100 0000%Downloading libblogger2 (download size 14.3 KiB)│ │~B)│ │Downloading libblogger2 (download size 14.3 KiB)─ 100%0%Installing libblogger2-2.20-2.2.aarch64.rpm (installed size 66.2 KiB)
│ │Installing libblogger2-2.20-2.2.aarch64.rpm (installed size 66.2 KiB) ─ 4896%100 5959590%Downloading libblkid1 (download size 222.7 KiB)
│ │Downloading libblkid1 (download size 222.7 KiB)─ 100%0%Installing libblkid1-2.36.2-3.1.aarch64.rpm (installed size 259 KiB)
│ │Installing libblkid1-2.36.2-3.1.aarch64.rpm (installed size 259 KiB) ─ 12 24 37 4961% 74 86 98 100 8888880%Downloading libavahi-common3 (download size 65.8 KiB)
│ │Downloading libavahi-common3 (download size 65.8 KiB)─ 100%0%Installing libavahi-common3-0.8-7.1.aarch64.rpm (installed size 67.2 KiB)
│ │Installing libavahi-common3-0.8-7.1.aarch64.rpm (installed size 67.2 KiB─ 47 95%100 7770%Downloading libaudit1 (download size 99.6 KiB)│ │~)│ │Downloading libaudit1 (download size 99.6 KiB)─ 100%0%Installing libaudit1-3.0.3-2.1.aarch64.rpm (installed size 130.7 KiB)
│ │Installing libaudit1-3.0.3-2.1.aarch64.rpm (installed size 130.7 KiB) ─ 244973%97100 6660%Downloading libattr1 (download size 36.3 KiB)
│ │Downloading libattr1 (download size 36.3 KiB)─ 100%0%Installing libattr1-2.5.1-1.8.aarch64.rpm (installed size 111.1 KiB)
│ │Installing libattr1-2.5.1-1.8.aarch64.rpm (installed size 111.1 KiB) ─ 2958% 76%99100 52522, 6550%Downloading libargon2-1 (download size 20.6 KiB)
│ │Downloading libargon2-1 (download size 20.6 KiB)─ 100%0%Installing libargon2-1-0.0+git20190520.62358ba-1.6.aarch64.rpm (installed
│ │Installing libargon2-1-0.0+git20190520.62358ba-1.6.aarch64.rpm (installe─ 4896%100 4440%Downloading libapparmor1 (download size 99.2 KiB)│ │~d size 66.2 KiB)│ │Downloading libapparmor1 (download size 99.2 KiB)─ 100%0%Installing libapparmor1-3.0.3-3.2.aarch64.rpm (installed size 131.7 KiB)
│ │Installing libapparmor1-3.0.3-3.2.aarch64.rpm (installed size 131.7 KiB)─ 244872%97100 3330%Downloading libalternatives1 (download size 20.7 KiB)
│ │Downloading libalternatives1 (download size 20.7 KiB)─ 100%0%Installing libalternatives1-1.2+3.b848aad-1.1.aarch64.rpm (installed size
│ │Installing libalternatives1-1.2+3.b848aad-1.1.aarch64.rpm (installed siz─ 43 86%99 100 2220%Downloading libaio1 (download size 24.1 KiB)│ │~e 73.9 KiB)│ │Downloading libaio1 (download size 24.1 KiB)─ 100%0%Installing libaio1-0.3.112+29.696a5e6483ba-1.2.aarch64.rpm (installed size
│ │Installing libaio1-0.3.112+29.696a5e6483ba-1.2.aarch64.rpm (installed si─ 34 69% 9100 1110%Downloading libacl1 (download size 43 KiB)│ │~ze 92 KiB)│ │Downloading libacl1 (download size 43 KiB)─ 100%0%Installing libacl1-2.3.1-1.8.aarch64.rpm (installed size 92.6 KiB)
│ │Installing libacl1-2.3.1-1.8.aarch64.rpm (installed size 92.6 KiB) ─ 34 68% 99100 0000%Downloading libXau6 (download size 16 KiB)
│ │Downloading libXau6 (download size 16 KiB)─ 100%0%Installing libXau6-1.0.9-1.9.aarch64.rpm (installed size 66.2 KiB)
│ │Installing libXau6-1.0.9-1.9.aarch64.rpm (installed size 66.2 KiB) ─ 4896%100 7497497490%Downloading libICE6 (download size 49.6 KiB)
│ │Downloading libICE6 (download size 49.6 KiB)─ 100%0%Installing libICE6-1.0.10-1.7.aarch64.rpm (installed size 132 KiB)
│ │Installing libICE6-1.0.10-1.7.aarch64.rpm (installed size 132 KiB) ─ 244872%96100 8880%Downloading gpart (download size 46 KiB)
│ │Downloading gpart (download size 46 KiB)─ 100%0%Installing gpart-0.3-1.18.aarch64.rpm (installed size 101.6 KiB)
│ │Installing gpart-0.3-1.18.aarch64.rpm (installed size 101.6 KiB) ─ 31 62% 8394 9 100 7770%Downloading findutils (download size 316.4 KiB)
│ │Downloading findutils (download size 316.4 KiB)─ 100%0%Installing findutils-4.8.0-2.9.aarch64.rpm (installed size 641 KiB)
│ │Installing findutils-4.8.0-2.9.aarch64.rpm (installed size 641 KiB) ─ 9 14 9 24 9 34 9 44 4955% 60% 6 71 80 5 90 5 100 61611, 6460%Downloading fillup (download size 25.4 KiB)
│ │Downloading fillup (download size 25.4 KiB)─ 100%0%Installing fillup-1.42-276.4.aarch64.rpm (installed size 68.4 KiB)
│ │Installing fillup-1.42-276.4.aarch64.rpm (installed size 68.4 KiB) ─ 46 93%9 100 5550%Downloading fdupes (download size 29.6 KiB)
│ │Downloading fdupes (download size 29.6 KiB)─ 100%0%Installing fdupes-2.1.2-1.11.aarch64.rpm (installed size 74.9 KiB)
│ │Installing fdupes-2.1.2-1.11.aarch64.rpm (installed size 74.9 KiB) ─ 42 84%9 97 100 4440%Downloading dosfstools (download size 147 KiB)
│ │Downloading dosfstools (download size 147 KiB)─ 100%0%Installing dosfstools-4.2-1.2.aarch64.rpm (installed size 507.1 KiB)
│ │Installing dosfstools-4.2-1.2.aarch64.rpm (installed size 507.1 KiB) ─ 6 12 9 25 31 8 44 518% 65% 71 7 83 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.436 GiB│ 643│ 32:56openSUSE-20210927-0│ 1.436 GiB│ 643│ 32:55632:56, 6430%Downloading dos2unix (download size 325.4 KiB)
│ │Downloading dos2unix (download size 325.4 KiB)─ 100%0%Installing dos2unix-7.4.2-2.2.aarch64.rpm (installed size 1.37 MiB)
│ │Installing dos2unix-7.4.2-2.2.aarch64.rpm (installed size 1.37 MiB) ─ 5 10 5 22 9 34 9 44 518% 63% 9 75 80 6 91 6 100 52352353, 6420%Downloading dmidecode (download size 71 KiB)
│ │Downloading dmidecode (download size 71 KiB)─ 100%0%Installing dmidecode-3.3-2.3.aarch64.rpm (installed size 166 KiB)
│ │Installing dmidecode-3.3-2.3.aarch64.rpm (installed size 166 KiB) ─ 1938 57% 76%83 97 100 1110%Downloading diffutils (download size 219.2 KiB)
│ │Downloading diffutils (download size 219.2 KiB)─ 100%0%Installing diffutils-3.8-1.1.aarch64.rpm (installed size 518.3 KiB)
│ │Installing diffutils-3.8-1.1.aarch64.rpm (installed size 518.3 KiB) ─ 6 12 9 25 31 7 43 4956% 62% 9 75 80 6 91 8 100 4040400%Downloading adjtimex (download size 39.2 KiB)
│ │Downloading adjtimex (download size 39.2 KiB)─ 100%0%Installing adjtimex-1.29-8.6.aarch64.rpm (installed size 91.4 KiB)
│ │Installing adjtimex-1.29-8.6.aarch64.rpm (installed size 91.4 KiB) ─ 34 69% 74 939 100 3923922, 6390%Downloading mozilla-nss-certs (download size 286.8 KiB)
│ │Downloading mozilla-nss-certs (download size 286.8 KiB)─ 100%0%Installing mozilla-nss-certs-3.69.1-1.1.aarch64.rpm (installed size 549.5
│ │Installing mozilla-nss-certs-3.69.1-1.1.aarch64.rpm (installed size 549.─ 5 11 7 23 9 34 40 46 52%8% 64% 9 75 81 7 93 8 100 3838380%Downloading pigz (download size 68 KiB)│ │~5 KiB)│ │Downloading pigz (download size 68 KiB)─ 100%0%Installing pigz-2.6-1.2.aarch64.rpm (installed size 135.9 KiB)
│ │Installing pigz-2.6-1.2.aarch64.rpm (installed size 135.9 KiB) ─ 23 46 70% 939 100 7770%Downloading libpng16-16 (download size 169 KiB)
│ │Downloading libpng16-16 (download size 169 KiB)─ 100%0%Installing libpng16-16-1.6.37-3.2.aarch64.rpm (installed size 258 KiB)
│ │Installing libpng16-16-1.6.37-3.2.aarch64.rpm (installed size 258 KiB) ─ 12 24 37 4962% 74 86 99 100 61611, 6360%Downloading libpci3 (download size 63 KiB)
│ │Downloading libpci3 (download size 63 KiB)─ 100%0%Installing libpci3-3.7.0-4.1.aarch64.rpm (installed size 84.6 KiB)
│ │Installing libpci3-3.7.0-4.1.aarch64.rpm (installed size 84.6 KiB) ─ 37 75%99100 5550%Downloading libelf1 (download size 84.7 KiB)
│ │Downloading libelf1 (download size 84.7 KiB)─ 100%0%Installing libelf1-0.185-3.1.aarch64.rpm (installed size 130.6 KiB)
│ │Installing libelf1-0.185-3.1.aarch64.rpm (installed size 130.6 KiB) ─ 244873%97100 4440%Downloading libidn2-0 (download size 71.3 KiB)
│ │Downloading libidn2-0 (download size 71.3 KiB)─ 100%0%Installing libidn2-0-2.3.2-1.1.aarch64.rpm (installed size 130.4 KiB)
│ │Installing libidn2-0-2.3.2-1.1.aarch64.rpm (installed size 130.4 KiB) ─ 244973%98100 3330%Downloading libusb-1_0-0 (download size 78 KiB)
│ │Downloading libusb-1_0-0 (download size 78 KiB)─ 100%0%Installing libusb-1_0-0-1.0.24-2.2.aarch64.rpm (installed size 173.8 KiB)
│ │Installing libusb-1_0-0-1.0.24-2.2.aarch64.rpm (installed size 173.8 KiB─ 18 36 54% 73%84 99 100 2220%Downloading libhidapi-hidraw0 (download size 29.8 KiB)│ │~)│ │Downloading libhidapi-hidraw0 (download size 29.8 KiB)─ 100%0%Installing libhidapi-hidraw0-0.10.1-2.1.aarch64.rpm (installed size 103.1
│ │Installing libhidapi-hidraw0-0.10.1-2.1.aarch64.rpm (installed size 103.─ 3 61% 96100 21021020, 6310%Downloading libtss2-sys1 (download size 56.7 KiB)│ │~1 KiB)│ │Downloading libtss2-sys1 (download size 56.7 KiB)─ 100%0%Installing libtss2-sys1-3.1.0-1.1.aarch64.rpm (installed size 194 KiB)
│ │Installing libtss2-sys1-3.1.0-1.1.aarch64.rpm (installed size 194 KiB) ─ 16 33 4965% 82 98 100 0000%Downloading libtevent0 (download size 48 KiB)
│ │Downloading libtevent0 (download size 48 KiB)─ 100%0%Installing libtevent0-0.10.2-1.6.aarch64.rpm (installed size 131 KiB)
│ │Installing libtevent0-0.10.2-1.6.aarch64.rpm (installed size 131 KiB) ─ 244873%97100 2929290%Downloading libsamba-errors0 (download size 657.4 KiB)
│ │Downloading libsamba-errors0 (download size 657.4 KiB)─ 100%0%Installing libsamba-errors0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (in
│ │Installing libsamba-errors0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (─ 7 14 9 26 33 8 45 52%7% 64% 71 6 83 90 5 100 18481848148, 6280%Downloading smp_utils (download size 187.8 KiB)│ │~installed size 1.31 MiB)│ │Downloading smp_utils (download size 187.8 KiB)─ 100%0%Installing smp_utils-0.99-2.3.aarch64.rpm (installed size 1.97 MiB)
│ │Installing smp_utils-0.99-2.3.aarch64.rpm (installed size 1.97 MiB) ─ 6 11 6 21 6 31 6 41 46 516% 61% 6 72 7 82 7 92 7 100 29762976296, 6270%Downloading libscg1_0 (download size 86 KiB)
│ │Downloading libscg1_0 (download size 86 KiB)─ 100%0%Installing libscg1_0-2021.09.01-44.1.aarch64.rpm (installed size 154 KiB)
│ │Installing libscg1_0-2021.09.01-44.1.aarch64.rpm (installed size 154 KiB─ 2 41 62% 87 99 100 65655, 6260%Downloading libfile1_0 (download size 52.6 KiB)│ │~)│ │Downloading libfile1_0 (download size 52.6 KiB)─ 100%0%Installing libfile1_0-2021.09.01-44.1.aarch64.rpm (installed size 68.2 KiB
│ │Installing libfile1_0-2021.09.01-44.1.aarch64.rpm (installed size 68.2 K─ 46 93%9 100 5550%Downloading libply5 (download size 97 KiB)│ │~iB)│ │Downloading libply5 (download size 97 KiB)─ 100%0%Installing libply5-0.9.5~git20210406.e554475-1.1.aarch64.rpm (installed si
│ │Installing libply5-0.9.5~git20210406.e554475-1.1.aarch64.rpm (installed ─ 244873%97100 4440%Downloading pkgconf (download size 44.8 KiB)│ │~size 131.2 KiB)│ │Downloading pkgconf (download size 44.8 KiB)─ 100%0%Installing pkgconf-1.8.0-1.1.aarch64.rpm (installed size 102.2 KiB)
│ │Installing pkgconf-1.8.0-1.1.aarch64.rpm (installed size 102.2 KiB) ─ 31 61% 6 892 8 100 3330%Downloading libglib-2_0-0 (download size 834.9 KiB)
│ │Downloading libglib-2_0-0 (download size 834.9 KiB)─ 100%0%Installing libglib-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 1.84 MiB)
│ │Installing libglib-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 1.84 MiB─ 5 10 5 20 5 30 5 40 45 505% 61% 6 71 7 82 7 92 7 100 72272272, 6220%Downloading numactl (download size 72.1 KiB)│ │~)│ │Downloading numactl (download size 72.1 KiB)─ 100%0%Installing numactl-2.0.14.20.g4ee5e0c-1.1.aarch64.rpm (installed size 452.
│ │Installing numactl-2.0.14.20.g4ee5e0c-1.1.aarch64.rpm (installed size 45─ 7 14 21 8 36 43 507% 65% 72 80 7 92 7 100 6161610%Downloading netcfg (download size 185.4 KiB)│ │~2.9 KiB)│ │Downloading netcfg (download size 185.4 KiB)─ 100%0%Installing netcfg-11.6-9.1.noarch.rpm (installed size 882.4 KiB)
│ │Installing netcfg-11.6-9.1.noarch.rpm (installed size 882.4 KiB) ─ 7 14 22 9 36 43 508% 65% 72 9 87 94 9 100 50150151, 6200%Downloading libnftnl11 (download size 72 KiB)
│ │Downloading libnftnl11 (download size 72 KiB)─ 100%0%Installing libnftnl11-1.2.0-1.1.aarch64.rpm (installed size 262.7 KiB)
│ │Installing libnftnl11-1.2.0-1.1.aarch64.rpm (installed size 262.7 KiB) ─ 12 24 36 4860% 73 85 97 100 1901900, 6190%Downloading libnetfilter_conntrack3 (download size 48.7 KiB)
│ │Downloading libnetfilter_conntrack3 (download size 48.7 KiB) ─ 100%0%Installing libnetfilter_conntrack3-1.0.8-2.4.aarch64.rpm (installed size 1
│ │Installing libnetfilter_conntrack3-1.0.8-2.4.aarch64.rpm (installed size─ 244973%97100 8880%Downloading libipset13 (download size 68.9 KiB)│ │~ 130.8 KiB)│ │Downloading libipset13 (download size 68.9 KiB)─ 100%0%Installing libipset13-7.15-1.1.aarch64.rpm (installed size 246.3 KiB)
│ │Installing libipset13-7.15-1.1.aarch64.rpm (installed size 246.3 KiB) ─ 13 26 39 52%64% 77 90 9 100 7770%Downloading ethtool (download size 213.4 KiB)
│ │Downloading ethtool (download size 213.4 KiB)─ 100%0%Installing ethtool-5.14-1.1.aarch64.rpm (installed size 659 KiB)
│ │Installing ethtool-5.14-1.1.aarch64.rpm (installed size 659 KiB) ─ 9 14 9 24 9 38 43 4853% 8% 67% 72 7 82 7 95 100 46394639439, 6160%Downloading libxml2-2 (download size 720.8 KiB)
│ │Downloading libxml2-2 (download size 720.8 KiB)─ 100%0%Installing libxml2-2-2.9.12-1.1.aarch64.rpm (installed size 1.73 MiB)
│ │Installing libxml2-2-2.9.12-1.1.aarch64.rpm (installed size 1.73 MiB) ─ 5 10 6 21 7 32 7 43 4854% 9% 64 70 5 81 6 92 7 100 35735737, 6150%Downloading libksba8 (download size 156.5 KiB)
│ │Downloading libksba8 (download size 156.5 KiB)─ 100%0%Installing libksba8-1.6.0-1.1.aarch64.rpm (installed size 448.2 KiB)
│ │Installing libksba8-1.6.0-1.1.aarch64.rpm (installed size 448.2 KiB) ─ 7 14 21 8 35 42 4956% 64% 71 9 85 90 7 100 24624626, 6140%Downloading libgcrypt20 (download size 464.6 KiB)
│ │Downloading libgcrypt20 (download size 464.6 KiB)─ 100%0%Installing libgcrypt20-1.9.4-1.1.aarch64.rpm (installed size 947.5 KiB)
│ │Installing libgcrypt20-1.9.4-1.1.aarch64.rpm (installed size 947.5 KiB) ─ 6 13 20 7 33 40 47 54% 60% 7 74 81 7 94 9 100 13513515, 6130%Downloading libassuan0 (download size 77.4 KiB)
│ │Downloading libassuan0 (download size 77.4 KiB)─ 100%0%Installing libassuan0-2.5.5-1.2.aarch64.rpm (installed size 222 KiB)
│ │Installing libassuan0-2.5.5-1.2.aarch64.rpm (installed size 222 KiB) ─ 14 28 43 57% 74%83 98 100 2220%Downloading libhogweed6 (download size 228.6 KiB)
│ │Downloading libhogweed6 (download size 228.6 KiB)─ 100%0%Installing libhogweed6-3.7.3-1.1.aarch64.rpm (installed size 383.5 KiB)
│ │Installing libhogweed6-3.7.3-1.1.aarch64.rpm (installed size 383.5 KiB) ─ 8 16 25 33 41 508% 66% 74 83 91 9 100 14144, 6110%Downloading libgdbm_compat4 (download size 33 KiB)
│ │Downloading libgdbm_compat4 (download size 33 KiB)─ 100%0%Installing libgdbm_compat4-1.20-1.1.aarch64.rpm (installed size 100.5 KiB)
│ │Installing libgdbm_compat4-1.20-1.1.aarch64.rpm (installed size 100.5 Ki─ 31 63% 97100 0000%Downloading libstdc++6 (download size 580.8 KiB)│ │~B)│ │Downloading libstdc++6 (download size 580.8 KiB)─ 100%0%Installing libstdc++6-11.2.1+git610-1.1.aarch64.rpm (installed size 2.07 M
│ │Installing libstdc++6-11.2.1+git610-1.1.aarch64.rpm (installed size 2.07─ 6 12 8 24 30 6 42 4854% 60% 6 72 8 84 90 6 100 1809118091 2181, 6090%Downloading libfreebl3-hmac (download size 123.8 KiB)│ │~ MiB)│ │Downloading libfreebl3-hmac (download size 123.8 KiB)─ 100%0%Installing libfreebl3-hmac-3.69.1-1.1.aarch64.rpm (installed size 1.8 KiB)
│ │Installing libfreebl3-hmac-3.69.1-1.1.aarch64.rpm (installed size 1.8 Ki─ 47 94%100 8880%Downloading libp11-kit0 (download size 354.3 KiB)│ │~B)│ │Downloading libp11-kit0 (download size 354.3 KiB)─ 100%0%Installing libp11-kit0-0.23.22-2.1.aarch64.rpm (installed size 1.89 MiB)
│ │Installing libp11-kit0-0.23.22-2.1.aarch64.rpm (installed size 1.89 MiB)─ 6 11 6 21 6 31 6 41 46 516% 61% 6 71 6 81 6 91 6 100 77297729729, 6070%Downloading libmetalink3 (download size 29.4 KiB)
│ │Downloading libmetalink3 (download size 29.4 KiB)─ 100%0%Installing libmetalink3-0.1.3-3.13.aarch64.rpm (installed size 72.1 KiB)
│ │Installing libmetalink3-0.1.3-3.13.aarch64.rpm (installed size 72.1 KiB)─ 44 87%92 8 100 6660%Downloading expat (download size 84.4 KiB)
│ │Downloading expat (download size 84.4 KiB)─ 100%0%Installing expat-2.4.1-1.1.aarch64.rpm (installed size 309.7 KiB)
│ │Installing expat-2.4.1-1.1.aarch64.rpm (installed size 309.7 KiB) ─ 1 2 31 6 44 57% 62% 76 8 9 100 65865868, 6050%Downloading efibootmgr (download size 44.3 KiB)
│ │Downloading efibootmgr (download size 44.3 KiB)─ 100%0%Installing efibootmgr-14-3.11.aarch64.rpm (installed size 159.8 KiB)
│ │Installing efibootmgr-14-3.11.aarch64.rpm (installed size 159.8 KiB) ─ 193 61% 86 97 100 4440%Downloading libcdrdeflt1_0 (download size 54.8 KiB)
│ │Downloading libcdrdeflt1_0 (download size 54.8 KiB)─ 100%0%Installing libcdrdeflt1_0-3.02~a10-44.1.aarch64.rpm (installed size 84.3 K
│ │Installing libcdrdeflt1_0-3.02~a10-44.1.aarch64.rpm (installed size 84.3─ 37 75%99100 3330%Downloading libthai0 (download size 27.4 KiB)│ │~ KiB)│ │Downloading libthai0 (download size 27.4 KiB)─ 100%0%Installing libthai0-0.1.28-1.4.aarch64.rpm (installed size 68.5 KiB)
│ │Installing libthai0-0.1.28-1.4.aarch64.rpm (installed size 68.5 KiB) ─ 46 93%9 100 2220%Downloading perl-base (download size 1.54 MiB)
│ │Downloading perl-base (download size 1.54 MiB)─ 100%0%Installing perl-base-5.34.0-1.1.aarch64.rpm (installed size 5.97 MiB)
│ │Installing perl-base-5.34.0-1.1.aarch64.rpm (installed size 5.97 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 01001000, 6010%Downloading libruby2_7-2_7 (download size 1.14 MiB)
│ │Downloading libruby2_7-2_7 (download size 1.14 MiB)─ 100%0%Installing libruby2_7-2_7-2.7.3-3.1.aarch64.rpm (installed size 3.26 MiB)
│ │Installing libruby2_7-2_7-2.7.3-3.1.aarch64.rpm (installed size 3.26 MiB─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 07015070150715, 6000%Downloading cpupower (download size 58.5 KiB)│ │~)│ │Downloading cpupower (download size 58.5 KiB)─ 100%0%Installing cpupower-5.14-2.1.aarch64.rpm (installed size 132 KiB)
│ │Installing cpupower-5.14-2.1.aarch64.rpm (installed size 132 KiB) ─ 23 47 53% 8% 72%8 84 91 7 100 5995995990%Downloading libreiserfscore0 (download size 90.2 KiB)
│ │Downloading libreiserfscore0 (download size 90.2 KiB)─ 100%0%Installing libreiserfscore0-3.6.27-5.2.aarch64.rpm (installed size 196 KiB
│ │Installing libreiserfscore0-3.6.27-5.2.aarch64.rpm (installed size 196 K─ 16 32 4965% 81 97 100 8880%Downloading libext2fs2 (download size 268.4 KiB)│ │~iB)│ │Downloading libext2fs2 (download size 268.4 KiB)─ 100%0%Installing libext2fs2-1.46.4-1.1.aarch64.rpm (installed size 524 KiB)
│ │Installing libext2fs2-1.46.4-1.1.aarch64.rpm (installed size 524 KiB) ─ 6 12 9 25 31 7 43 4955% 61% 7 74 80 6 92 8 100 67467464, 5970%Downloading librmt1_0 (download size 59 KiB)
│ │Downloading librmt1_0 (download size 59 KiB)─ 100%0%Installing librmt1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.5 KiB)
│ │Installing librmt1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.5 Ki─ 37 75%99100 6660%Downloading chkstat (download size 389 KiB)│ │~B)│ │Downloading chkstat (download size 389 KiB)─ 100%0%Installing chkstat-1550_20210901-29.1.aarch64.rpm (installed size 1.19 MiB
│ │Installing chkstat-1550_20210901-29.1.aarch64.rpm (installed size 1.19 M─ 5 10 5 20 6 31 6 41 47 52%7% 62% 8 73 8 83 9 94 9 100 55255252, 5950%Downloading libzio1 (download size 29.7 KiB)│ │~iB)│ │Downloading libzio1 (download size 29.7 KiB)─ 100%0%Installing libzio1-1.08-1.1.aarch64.rpm (installed size 84.3 KiB)
│ │Installing libzio1-1.08-1.1.aarch64.rpm (installed size 84.3 KiB) ─ 38 75%99100 4440%Downloading libmagic1 (download size 123.8 KiB)
│ │Downloading libmagic1 (download size 123.8 KiB)─ 100%0%Installing libmagic1-5.40-1.8.aarch64.rpm (installed size 196 KiB)
│ │Installing libmagic1-5.40-1.8.aarch64.rpm (installed size 196 KiB) ─ 16 32 4965% 81 97 100 3330%Downloading netcat-openbsd (download size 33.2 KiB)
│ │Downloading netcat-openbsd (download size 33.2 KiB)─ 100%0%Installing netcat-openbsd-1.203-3.3.aarch64.rpm (installed size 73.3 KiB)
│ │Installing netcat-openbsd-1.203-3.3.aarch64.rpm (installed size 73.3 KiB─ 43 86%91 9 100 2220%Downloading libbrotlienc1 (download size 242.3 KiB)│ │~)│ │Downloading libbrotlienc1 (download size 242.3 KiB)─ 100%0%Installing libbrotlienc1-1.0.9-1.4.aarch64.rpm (installed size 577.9 KiB)
│ │Installing libbrotlienc1-1.0.9-1.4.aarch64.rpm (installed size 577.9 KiB─ 5 11 6 22 7 33 8 44 4955% 60% 6 71 7 83 8 94 9 100 41141141, 5910%Downloading libbrotlidec1 (download size 30.8 KiB)│ │~)│ │Downloading libbrotlidec1 (download size 30.8 KiB)─ 100%0%Installing libbrotlidec1-1.0.9-1.4.aarch64.rpm (installed size 65.9 KiB)
│ │Installing libbrotlidec1-1.0.9-1.4.aarch64.rpm (installed size 65.9 KiB)─ 4897%100 00 300%Downloading libmount1 (download size 242.2 KiB)
│ │Downloading libmount1 (download size 242.2 KiB)─ 100%0%Installing libmount1-2.36.2-3.1.aarch64.rpm (installed size 322.6 KiB)
│ │Installing libmount1-2.36.2-3.1.aarch64.rpm (installed size 322.6 KiB) ─ 9 1 2 3 459% 6 7 8 9 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.404 GiB│ 589│ 32:32openSUSE-20210927-0│ 1.404 GiB│ 589│ 32:3132, 5890%Downloading libfdisk1 (download size 260.3 KiB)
│ │Downloading libfdisk1 (download size 260.3 KiB)─ 100%0%Installing libfdisk1-2.36.2-3.1.aarch64.rpm (installed size 330.4 KiB)
│ │Installing libfdisk1-2.36.2-3.1.aarch64.rpm (installed size 330.4 KiB) ─ 9 1 2 38 458% 67% 7 8 96 100 3838131, 5880%Downloading libsemanage2 (download size 107.1 KiB)
│ │Downloading libsemanage2 (download size 107.1 KiB)─ 100%0%Installing libsemanage2-3.2-2.1.aarch64.rpm (installed size 327.4 KiB)
│ │Installing libsemanage2-3.2-2.1.aarch64.rpm (installed size 327.4 KiB) ─ 9 1 2 3 4858% 6 7 87 9 100 70700, 5870%Downloading libauparse0 (download size 112 KiB)
│ │Downloading libauparse0 (download size 112 KiB)─ 100%0%Installing libauparse0-3.0.3-2.1.aarch64.rpm (installed size 194 KiB)
│ │Installing libauparse0-3.0.3-2.1.aarch64.rpm (installed size 194 KiB) ─ 16 33 4965% 82 98 100 6660%Downloading attr (download size 56.8 KiB)
│ │Downloading attr (download size 56.8 KiB)─ 100%0%Installing attr-2.5.1-1.8.aarch64.rpm (installed size 305 KiB)
│ │Installing attr-2.5.1-1.8.aarch64.rpm (installed size 305 KiB) ─ 1 2 31 42 53% 64% 70 5 84 9 95 100 52952929, 5850%Downloading libfind4_0 (download size 75.7 KiB)
│ │Downloading libfind4_0 (download size 75.7 KiB)─ 100%0%Installing libfind4_0-1.8-44.1.aarch64.rpm (installed size 86 KiB)
│ │Installing libfind4_0-1.8-44.1.aarch64.rpm (installed size 86 KiB) ─ 37 74%99100 2424240%Downloading acl (download size 75.2 KiB)
│ │Downloading acl (download size 75.2 KiB)─ 100%0%Installing acl-2.3.1-1.8.aarch64.rpm (installed size 320.4 KiB)
│ │Installing acl-2.3.1-1.8.aarch64.rpm (installed size 320.4 KiB) ─ 9 1 30 4 5161% 8 77 82 7 93 8 100 3330%Downloading libxcb1 (download size 61.4 KiB)
│ │Downloading libxcb1 (download size 61.4 KiB)─ 100%0%Installing libxcb1-1.14-1.6.aarch64.rpm (installed size 195 KiB)
│ │Installing libxcb1-1.14-1.6.aarch64.rpm (installed size 195 KiB) ─ 16 32 4965% 82 98 100 2220%Downloading libSM6 (download size 23.8 KiB)
│ │Downloading libSM6 (download size 23.8 KiB)─ 100%0%Installing libSM6-1.2.3-1.11.aarch64.rpm (installed size 66.3 KiB)
│ │Installing libSM6-1.2.3-1.11.aarch64.rpm (installed size 66.3 KiB) ─ 4896%100 1110%Downloading libdw1 (download size 250 KiB)
│ │Downloading libdw1 (download size 250 KiB)─ 100%0%Installing libdw1-0.185-3.1.aarch64.rpm (installed size 644.6 KiB)
│ │Installing libdw1-0.185-3.1.aarch64.rpm (installed size 644.6 KiB) ─ 9 14 9 24 9 34 9 44 4954% 9% 64 9 74 9 84 9 94 9 100 10810818, 5800%Downloading libpsl5 (download size 64.9 KiB)
│ │Downloading libpsl5 (download size 64.9 KiB)─ 100%0%Installing libpsl5-0.21.1-1.5.aarch64.rpm (installed size 131.3 KiB)
│ │Installing libpsl5-0.21.1-1.5.aarch64.rpm (installed size 131.3 KiB) ─ 244872%97100 7979790%Downloading libldb2 (download size 162.3 KiB)
│ │Downloading libldb2 (download size 162.3 KiB)─ 100%0%Installing libldb2-2.3.0-1.2.aarch64.rpm (installed size 1.03 MiB)
│ │Installing libldb2-2.3.0-1.2.aarch64.rpm (installed size 1.03 MiB) ─ 6 12 8 24 31 7 43 4956% 62% 8 75 81 7 93 9 100 08608606, 5780%Downloading libscgcmd1_0 (download size 58.1 KiB)
│ │Downloading libscgcmd1_0 (download size 58.1 KiB)─ 100%0%Installing libscgcmd1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.5 K
│ │Installing libscgcmd1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.5─ 37 75%99100 7770%Downloading librscg1_0 (download size 58.5 KiB)│ │~ KiB)│ │Downloading librscg1_0 (download size 58.5 KiB)─ 100%0%Installing librscg1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.7 KiB
│ │Installing librscg1_0-2021.09.01-44.1.aarch64.rpm (installed size 84.7 K─ 37 75%99100 6660%Downloading libply-splash-core5 (download size 100.3 KiB)│ │~iB)│ │Downloading libply-splash-core5 (download size 100.3 KiB)─ 100%0%Installing libply-splash-core5-0.9.5~git20210406.e554475-1.1.aarch64.rpm (
│ │Installing libply-splash-core5-0.9.5~git20210406.e554475-1.1.aarch64.rpm─ 244872%97100 5550%Downloading libgobject-2_0-0 (download size 379.3 KiB)│ │~ (installed size 131.7 KiB)│ │Downloading libgobject-2_0-0 (download size 379.3 KiB)─ 100%0%Installing libgobject-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 416.5 K
│ │Installing libgobject-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 416.5─ 7 15 23 30 8 46 53% 61% 9 76 84 92 9 100 39945399453995, 5740%Downloading libgmodule-2_0-0 (download size 259 KiB)│ │~ KiB)│ │Downloading libgmodule-2_0-0 (download size 259 KiB)─ 100%0%Installing libgmodule-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 92.3 Ki
│ │Installing libgmodule-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 92.3 ─ 34 69% 9100 3330%Downloading libavahi-glib1 (download size 15 KiB)│ │~KiB)│ │Downloading libavahi-glib1 (download size 15 KiB)─ 100%0%Installing libavahi-glib1-0.8-7.1.aarch64.rpm (installed size 66.2 KiB)
│ │Installing libavahi-glib1-0.8-7.1.aarch64.rpm (installed size 66.2 KiB) ─ 4896%100 2220%Downloading gamin-server (download size 47.8 KiB)
│ │Downloading gamin-server (download size 47.8 KiB)─ 100%0%Installing gamin-server-0.1.10-16.7.aarch64.rpm (installed size 131.4 KiB)
│ │Installing gamin-server-0.1.10-16.7.aarch64.rpm (installed size 131.4 Ki─ 244873%97100 1110%Downloading libcares2 (download size 66 KiB)│ │~B)│ │Downloading libcares2 (download size 66 KiB)─ 100%0%Installing libcares2-1.17.2-2.1.aarch64.rpm (installed size 130.9 KiB)
│ │Installing libcares2-1.17.2-2.1.aarch64.rpm (installed size 130.9 KiB) ─ 244873%97100 0000%Downloading libnftables1 (download size 293.6 KiB)
│ │Downloading libnftables1 (download size 293.6 KiB)─ 100%0%Installing libnftables1-1.0.0-1.1.aarch64.rpm (installed size 841.6 KiB)
│ │Installing libnftables1-1.0.0-1.1.aarch64.rpm (installed size 841.6 KiB)─ 7 15 22 30 8 45 53% 60% 8 76 83 91 8 100 8694869484, 5690%Downloading xtables-plugins (download size 280.2 KiB)
│ │Downloading xtables-plugins (download size 280.2 KiB)─ 100%0%Installing xtables-plugins-1.8.7-1.3.aarch64.rpm (installed size 8.14 MiB)
│ │Installing xtables-plugins-1.8.7-1.3.aarch64.rpm (installed size 8.14 Mi─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 08120812012, 5680%Downloading ipset (download size 28.4 KiB)│ │~B)│ │Downloading ipset (download size 28.4 KiB)─ 100%0%Installing ipset-7.15-1.1.aarch64.rpm (installed size 80.3 KiB)
│ │Installing ipset-7.15-1.1.aarch64.rpm (installed size 80.3 KiB) ─ 39 79%84 99 100 7770%Downloading libaugeas0 (download size 253.2 KiB)
│ │Downloading libaugeas0 (download size 253.2 KiB)─ 100%0%Installing libaugeas0-1.12.0-4.1.aarch64.rpm (installed size 453.7 KiB)
│ │Installing libaugeas0-1.12.0-4.1.aarch64.rpm (installed size 453.7 KiB) ─ 7 14 21 8 35 42 4956% 63% 70 7 84 92 9 100 6660%Downloading libxslt1 (download size 175.5 KiB)
│ │Downloading libxslt1 (download size 175.5 KiB)─ 100%0%Installing libxslt1-1.1.34-3.1.aarch64.rpm (installed size 456.4 KiB)
│ │Installing libxslt1-1.1.34-3.1.aarch64.rpm (installed size 456.4 KiB) ─ 7 14 21 8 35 42 4956% 63% 70 7 84 91 8 100 89518951891, 5650%Downloading libsystemd0 (download size 687.4 KiB)
│ │Downloading libsystemd0 (download size 687.4 KiB)─ 100%0%Installing libsystemd0-249.4-2.2.aarch64.rpm (installed size 838 KiB)
│ │Installing libsystemd0-249.4-2.2.aarch64.rpm (installed size 838 KiB) ─ 7 15 22 30 8 45 53% 61% 8 76 84 91 9 100 40400, 5640%Downloading libyaml-cpp0_6 (download size 107.7 KiB)
│ │Downloading libyaml-cpp0_6 (download size 107.7 KiB)─ 100%0%Installing libyaml-cpp0_6-0.6.3-1.6.aarch64.rpm (installed size 323.2 KiB)
│ │Installing libyaml-cpp0_6-0.6.3-1.6.aarch64.rpm (installed size 323.2 Ki─ 9 1 2 3 459% 6 7 8 98 100 8383830%Downloading libtiff5 (download size 243.6 KiB)│ │~B)│ │Downloading libtiff5 (download size 243.6 KiB)─ 100%0%Installing libtiff5-4.3.0-1.2.aarch64.rpm (installed size 586 KiB)
│ │Installing libtiff5-4.3.0-1.2.aarch64.rpm (installed size 586 KiB) ─ 5 10 6 21 7 32 8 43 4954% 9% 65 70 6 81 7 93 8 100 20920909, 5620%Downloading libsigc-2_0-0 (download size 62.3 KiB)
│ │Downloading libsigc-2_0-0 (download size 62.3 KiB)─ 100%0%Installing libsigc-2_0-0-2.10.7-1.1.aarch64.rpm (installed size 173.8 KiB)
│ │Installing libsigc-2_0-0-2.10.7-1.1.aarch64.rpm (installed size 173.8 Ki─ 18 36 56% 67% 82 99 100 1110%Downloading libproxy1 (download size 83.5 KiB)Installing libtiff5-4.3.0-1.2.aarch64.rpm (installed size 586 KiB)sigc-2_0-0 (download size 62.3 KiB)sigc-2_0-0-2.10.7-1.1.aarch64.rpm (installed size 173.8 Ki~B)Downloading libproxy1 (download size 83.5 KiB)100%0%Installing libproxy1-0.4.17-2.1.aarch64.rpm (installed size 158 KiB)
│ │Installing libproxy1-0.4.17-2.1.aarch64.rpm (installed size 158 KiB) ─ 24 60% 899100 70870878, 5600%Downloading libprotobuf-lite28 (download size 260.2 KiB)
│ │Downloading libprotobuf-lite28 (download size 260.2 KiB)─ 100%0%Installing libprotobuf-lite28-3.17.3-2.1.aarch64.rpm (installed size 774.6
│ │Installing libprotobuf-lite28-3.17.3-2.1.aarch64.rpm (installed size 774─ 8 16 24 33 41 4957% 66% 74 82 90 5 100 5975977, 5590%Downloading libncurses6 (download size 618.5 KiB)│ │~.6 KiB)│ │Downloading libncurses6 (download size 618.5 KiB)─ 100%0%Installing libncurses6-6.2.20210911-26.1.aarch64.rpm (installed size 1.63
│ │Installing libncurses6-6.2.20210911-26.1.aarch64.rpm (installed size 1.6─ 5 11 7 23 9 35 41 47 53% 8% 64% 70 6 82 8 93 9 100 58558555, 5580%Downloading libdb-4_8 (download size 759.3 KiB)│ │~3 MiB)│ │Downloading libdb-4_8 (download size 759.3 KiB)─ 100%0%Installing libdb-4_8-4.8.30-38.20.aarch64.rpm (installed size 3.02 MiB)
│ │Installing libdb-4_8-4.8.30-38.20.aarch64.rpm (installed size 3.02 MiB) ─ 5 10 5 20 5 30 5 40 45 516% 61% 6 71 6 82 7 92 7 100 27127121, 5570%Downloading libboost_thread1_77_0 (download size 111.2 KiB)
│ │Downloading libboost_thread1_77_0 (download size 111.2 KiB) ─ 100%0%Installing libboost_thread1_77_0-1.77.0-1.1.aarch64.rpm (installed size 13
│ │Installing libboost_thread1_77_0-1.77.0-1.1.aarch64.rpm (installed size ─ 244873%97100 6660%Downloading libsoftokn3 (download size 312.6 KiB)│ │~131.2 KiB)│ │Downloading libsoftokn3 (download size 312.6 KiB)─ 100%0%Installing libsoftokn3-3.69.1-1.1.aarch64.rpm (installed size 522 KiB)
│ │Installing libsoftokn3-3.69.1-1.1.aarch64.rpm (installed size 522 KiB) ─ 6 12 8 24 31 7 43 4955% 61% 8 74 80 6 92 8 100 15015010, 5550%Downloading p11-kit-tools (download size 106.9 KiB)
│ │Downloading p11-kit-tools (download size 106.9 KiB)─ 100%0%Installing p11-kit-tools-0.23.22-2.1.aarch64.rpm (installed size 332.6 KiB
│ │Installing p11-kit-tools-0.23.22-2.1.aarch64.rpm (installed size 332.6 K─ 9 1 2 3 4858% 6 77 8 96 100 4440%Downloading p11-kit (download size 96.6 KiB)│ │~iB)│ │Downloading p11-kit (download size 96.6 KiB)─ 100%0%Installing p11-kit-0.23.22-2.1.aarch64.rpm (installed size 327 KiB)
│ │Installing p11-kit-0.23.22-2.1.aarch64.rpm (installed size 327 KiB) ─ 9 1 2 3 4858% 6 77 88 9 100 31:5931:591:59, 5530%Downloading paper (download size 29.3 KiB)
│ │Downloading paper (download size 29.3 KiB)─ 100%0%Installing paper-2.3-1.4.aarch64.rpm (installed size 113.4 KiB)
│ │Installing paper-2.3-1.4.aarch64.rpm (installed size 113.4 KiB) ─ 735 63% 8 96100 2220%Downloading file (download size 53.6 KiB)
│ │Downloading file (download size 53.6 KiB)─ 100%0%Installing file-5.40-1.8.aarch64.rpm (installed size 133.3 KiB)
│ │Installing file-5.40-1.8.aarch64.rpm (installed size 133.3 KiB) ─ 23 47 73%91 9 100 1110%Downloading libfreetype6 (download size 542.3 KiB)
│ │Downloading libfreetype6 (download size 542.3 KiB)─ 100%0%Installing libfreetype6-2.11.0-1.1.aarch64.rpm (installed size 1.24 MiB)
│ │Installing libfreetype6-2.11.0-1.1.aarch64.rpm (installed size 1.24 MiB)─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 82 7 92 7 100 79077907797, 5500%Downloading star (download size 462.9 KiB)
│ │Downloading star (download size 462.9 KiB)─ 100%0%Installing star-1.6.1-44.1.aarch64.rpm (installed size 1.23 MiB)
│ │Installing star-1.6.1-44.1.aarch64.rpm (installed size 1.23 MiB) ─ 5 10 5 20 5 30 5 41 46 52%7% 62% 7 72 7 83 9 94 9 100 8496849686, 5490%Downloading libxcb-shm0 (download size 21.9 KiB)
│ │Downloading libxcb-shm0 (download size 21.9 KiB)─ 100%0%Installing libxcb-shm0-1.14-1.6.aarch64.rpm (installed size 66.2 KiB)
│ │Installing libxcb-shm0-1.14-1.6.aarch64.rpm (installed size 66.2 KiB) ─ 4896%100 8880%Downloading libxcb-render0 (download size 31.8 KiB)
│ │Downloading libxcb-render0 (download size 31.8 KiB)─ 100%0%Installing libxcb-render0-1.14-1.6.aarch64.rpm (installed size 66.4 KiB)
│ │Installing libxcb-render0-1.14-1.6.aarch64.rpm (installed size 66.4 KiB)─ 4896%100 75755, 5470%Downloading libX11-6 (download size 649.3 KiB)
│ │Downloading libX11-6 (download size 649.3 KiB)─ 100%0%Installing libX11-6-1.7.2-1.1.aarch64.rpm (installed size 1.27 MiB)
│ │Installing libX11-6-1.7.2-1.1.aarch64.rpm (installed size 1.27 MiB) ─ 7 12 7 22 7 32 9 44 4954% 9% 64 71 6 81 6 91 6 100 76476474, 5460%Downloading libasm1 (download size 55.6 KiB)
│ │Downloading libasm1 (download size 55.6 KiB)─ 100%0%Installing libasm1-0.185-3.1.aarch64.rpm (installed size 66.7 KiB)
│ │Installing libasm1-0.185-3.1.aarch64.rpm (installed size 66.7 KiB) ─ 47 95%100 5550%Downloading mkisofs (download size 315.9 KiB)
│ │Downloading mkisofs (download size 315.9 KiB)─ 100%0%Installing mkisofs-3.02~a10-44.1.aarch64.rpm (installed size 912.2 KiB)
│ │Installing mkisofs-3.02~a10-44.1.aarch64.rpm (installed size 912.2 KiB) ─ 6 11 8 25 32 40 47 54% 61% 8 75 82 7 92 9 100 64264262, 5440%Downloading libply-splash-graphics5 (download size 80 KiB)
│ │Downloading libply-splash-graphics5 (download size 80 KiB)─ 100%0%Installing libply-splash-graphics5-0.9.5~git20210406.e554475-1.1.aarch64.r
│ │Installing libply-splash-graphics5-0.9.5~git20210406.e554475-1.1.aarch64─ 47 95%100 3330%Downloading libfam0-gamin (download size 20 KiB)│ │~.rpm (installed size 67 KiB)│ │Downloading libfam0-gamin (download size 20 KiB)─ 100%0%Installing libfam0-gamin-0.1.10-16.7.aarch64.rpm (installed size 66.4 KiB)
│ │Installing libfam0-gamin-0.1.10-16.7.aarch64.rpm (installed size 66.4 Ki─ 4896%100 2220%Downloading augeas-lenses (download size 217.8 KiB)│ │~B)│ │Downloading augeas-lenses (download size 217.8 KiB)─ 100%0%Installing augeas-lenses-1.12.0-4.1.aarch64.rpm (installed size 671 KiB)
│ │Installing augeas-lenses-1.12.0-4.1.aarch64.rpm (installed size 671 KiB)─ 5 10 5 20 5 31 6 41 46 516% 61% 6 71 7 82 7 92 8 100 51151151, 5410%Downloading libprocps8 (download size 95.8 KiB)
│ │Downloading libprocps8 (download size 95.8 KiB)─ 100%0%Installing libprocps8-3.3.17-5.1.aarch64.rpm (installed size 131 KiB)
│ │Installing libprocps8-3.3.17-5.1.aarch64.rpm (installed size 131 KiB) ─ 244873%97100 0000%Downloading libdbus-1-3 (download size 239.7 KiB)
│ │Downloading libdbus-1-3 (download size 239.7 KiB)─ 100%0%Installing libdbus-1-3-1.12.20-5.3.aarch64.rpm (installed size 390 KiB)
│ │Installing libdbus-1-3-1.12.20-5.3.aarch64.rpm (installed size 390 KiB) ─ 8 16 24 32 41 4957% 65% 73 81 90 8 100 3939390%Downloading terminfo-base (download size 391.7 KiB)
│ │Downloading terminfo-base (download size 391.7 KiB)─ 100%0%Installing terminfo-base-6.2.20210911-26.1.aarch64.rpm (installed size 1.1
│ │Installing terminfo-base-6.2.20210911-26.1.aarch64.rpm (installed size 1─ 5 10 6 21 6 32 7 42 4853% 8% 64% 9 74 80 5 90 5 100 48494849449, 5380%Downloading perl (download size 7.65 MiB)│ │~.16 MiB)│ │Downloading perl (download size 7.65 MiB)─ 100%0%Installing perl-5.34.0-1.1.aarch64.rpm (installed size 47.93 MiB)
│ │Installing perl-5.34.0-1.1.aarch64.rpm (installed size 47.93 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.327 GiB│ 537│ 24:27openSUSE-20210927-0│ 1.327 GiB│ 537│ 24:27 62724:27, 5370%Downloading mozilla-nss (download size 731.4 KiB)
│ │Downloading mozilla-nss (download size 731.4 KiB)─ 100%0%Installing mozilla-nss-3.69.1-1.1.aarch64.rpm (installed size 1.96 MiB)
│ │Installing mozilla-nss-3.69.1-1.1.aarch64.rpm (installed size 1.96 MiB) ─ 6 11 7 22 7 33 8 43 4954% 9% 64 9 74 80 5 90 6 100 56556555, 5360%Downloading libharfbuzz0 (download size 425 KiB)
│ │Downloading libharfbuzz0 (download size 425 KiB)─ 100%0%Installing libharfbuzz0-2.9.1-1.1.aarch64.rpm (installed size 915.5 KiB)
│ │Installing libharfbuzz0-2.9.1-1.1.aarch64.rpm (installed size 915.5 KiB)─ 7 14 20 7 34 41 4855% 62% 9 76 83 90 8 100 45445444, 5350%Downloading libfontconfig1 (download size 190.2 KiB)
│ │Downloading libfontconfig1 (download size 190.2 KiB)─ 100%0%Installing libfontconfig1-2.13.1-2.9.aarch64.rpm (installed size 323.1 KiB
│ │Installing libfontconfig1-2.13.1-2.9.aarch64.rpm (installed size 323.1 K─ 9 1 2 3 459% 6 7 8 9 100 43433, 5340%Downloading spax (download size 86.8 KiB)│ │~iB)│ │Downloading spax (download size 86.8 KiB)─ 100%0%Installing spax-1.6.1-44.1.aarch64.rpm (installed size 53.7 KiB)
│ │Installing spax-1.6.1-44.1.aarch64.rpm (installed size 53.7 KiB) ─ 34 93%9 100 3330%Downloading libglvnd (download size 240.2 KiB)
│ │Downloading libglvnd (download size 240.2 KiB)─ 100%0%Installing libglvnd-1.3.3-2.1.aarch64.rpm (installed size 3.42 MiB)
│ │Installing libglvnd-1.3.3-2.1.aarch64.rpm (installed size 3.42 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 02002000, 5320%Downloading libXt6 (download size 173.9 KiB)
│ │Downloading libXt6 (download size 173.9 KiB)─ 100%0%Installing libXt6-1.2.1-1.3.aarch64.rpm (installed size 467 KiB)
│ │Installing libXt6-1.2.1-1.3.aarch64.rpm (installed size 467 KiB) ─ 6 13 20 7 34 41 47 54% 61% 8 75 82 9 95 100 11911919, 5310%Downloading libXrender1 (download size 25.4 KiB)
│ │Downloading libXrender1 (download size 25.4 KiB)─ 100%0%Installing libXrender1-0.9.10-1.20.aarch64.rpm (installed size 66.6 KiB)
│ │Installing libXrender1-0.9.10-1.20.aarch64.rpm (installed size 66.6 KiB)─ 4896%100 0000%Downloading libXpm4 (download size 41.5 KiB)
│ │Downloading libXpm4 (download size 41.5 KiB)─ 100%0%Installing libXpm4-3.5.13-1.6.aarch64.rpm (installed size 131.2 KiB)
│ │Installing libXpm4-3.5.13-1.6.aarch64.rpm (installed size 131.2 KiB) ─ 244873%97100 2929290%Downloading libXext6 (download size 36.8 KiB)
│ │Downloading libXext6 (download size 36.8 KiB)─ 100%0%Installing libXext6-1.3.4-1.8.aarch64.rpm (installed size 131.7 KiB)
│ │Installing libXext6-1.3.4-1.8.aarch64.rpm (installed size 131.7 KiB) ─ 244872%97100 1981981980%Downloading zisofs-tools (download size 28 KiB)
│ │Downloading zisofs-tools (download size 28 KiB)─ 100%0%Installing zisofs-tools-1.0.8-26.2.aarch64.rpm (installed size 89.2 KiB)
│ │Installing zisofs-tools-1.0.8-26.2.aarch64.rpm (installed size 89.2 KiB)─ 35 70% 5 97100 7770%Downloading libavahi-client3 (download size 69.6 KiB)
│ │Downloading libavahi-client3 (download size 69.6 KiB)─ 100%0%Installing libavahi-client3-0.8-7.1.aarch64.rpm (installed size 131.1 KiB)
│ │Installing libavahi-client3-0.8-7.1.aarch64.rpm (installed size 131.1 Ki─ 244873%97100 6660%Downloading terminfo-screen (download size 282 KiB)│ │~B)│ │Downloading terminfo-screen (download size 282 KiB)─ 100%0%Installing terminfo-screen-6.2.20210911-26.1.aarch64.rpm (installed size 7
│ │Installing terminfo-screen-6.2.20210911-26.1.aarch64.rpm (installed size─ 38 76%98100 5550%Downloading perl-gettext (download size 24.9 KiB)│ │~ 7.8 KiB)│ │Downloading perl-gettext (download size 24.9 KiB)─ 100%0%Installing perl-gettext-1.07-1.44.aarch64.rpm (installed size 82 KiB)
│ │Installing perl-gettext-1.07-1.44.aarch64.rpm (installed size 82 KiB) ─ 8 47 85%96 100 4440%Downloading perl-XML-SAX-Base (download size 32.8 KiB)
│ │Downloading perl-XML-SAX-Base (download size 32.8 KiB)─ 100%0%Installing perl-XML-SAX-Base-1.09-1.16.noarch.rpm (installed size 173.4 Ki
│ │Installing perl-XML-SAX-Base-1.09-1.16.noarch.rpm (installed size 173.4 ─ 18 36 55% 68% 84 93 8 100 38388, 5230%Downloading perl-XML-NamespaceSupport (download size 26.5 KiB) │ │~KiB)│ │Downloading perl-XML-NamespaceSupport (download size 26.5 KiB) ─ 100%0%Installing perl-XML-NamespaceSupport-1.12-1.16.noarch.rpm (installed size
│ │Installing perl-XML-NamespaceSupport-1.12-1.16.noarch.rpm (installed siz─ 42 4990%9 100 2220%Downloading perl-X11-Protocol (download size 102.6 KiB)│ │~e 45 KiB)│ │Downloading perl-X11-Protocol (download size 102.6 KiB)─ 100%0%Installing perl-X11-Protocol-0.56-15.8.noarch.rpm (installed size 277.9 Ki
│ │Installing perl-X11-Protocol-0.56-15.8.noarch.rpm (installed size 277.9 ─ 13 20 31 42 53% 8% 6 77 82 7 92 8 100 1110%Downloading perl-URI (download size 108.6 KiB)│ │~KiB)│ │Downloading perl-URI (download size 108.6 KiB)─ 100%0%Installing perl-URI-5.09-1.3.noarch.rpm (installed size 211.8 KiB)
│ │Installing perl-URI-5.09-1.3.noarch.rpm (installed size 211.8 KiB) ─ 14 21 7 32 7 42 47 52%7% 63% 74 83 8 93 8 100 8080800%Downloading perl-Try-Tiny (download size 32.6 KiB)
│ │Downloading perl-Try-Tiny (download size 32.6 KiB)─ 100%0%Installing perl-Try-Tiny-0.30-1.12.noarch.rpm (installed size 36.6 KiB)
│ │Installing perl-Try-Tiny-0.30-1.12.noarch.rpm (installed size 36.6 KiB) ─ 54% 64% 7 9 9100 1919190%Downloading perl-TimeDate (download size 51.6 KiB)
│ │Downloading perl-TimeDate (download size 51.6 KiB)─ 100%0%Installing perl-TimeDate-2.33-1.6.noarch.rpm (installed size 96.8 KiB)
│ │Installing perl-TimeDate-2.33-1.6.noarch.rpm (installed size 96.8 KiB) ─ 9 15 20 5 30 6 41 46 52%8% 66% 74 86 91 7 100 8880%Downloading perl-Parse-RecDescent (download size 115.4 KiB)
│ │Downloading perl-Parse-RecDescent (download size 115.4 KiB) ─ 100%0%Installing perl-Parse-RecDescent-1.967015-1.15.aarch64.rpm (installed size
│ │Installing perl-Parse-RecDescent-1.967015-1.15.aarch64.rpm (installed si─ 1 21 32 43 54% 65% 73 82 7 98 100 77777, 5170%Downloading perl-LWP-MediaTypes (download size 34.8 KiB)│ │~ze 293.5 KiB)│ │Downloading perl-LWP-MediaTypes (download size 34.8 KiB)─ 100%0%Installing perl-LWP-MediaTypes-6.04-1.8.noarch.rpm (installed size 79.2 Ki
│ │Installing perl-LWP-MediaTypes-6.04-1.8.noarch.rpm (installed size 79.2 ─ 8469% 74 96100 6660%Downloading perl-IPC-Run3 (download size 39.6 KiB)│ │~KiB)│ │Downloading perl-IPC-Run3 (download size 39.6 KiB)─ 100%0%Installing perl-IPC-Run3-0.048-1.19.noarch.rpm (installed size 61.2 KiB)
│ │Installing perl-IPC-Run3-0.048-1.19.noarch.rpm (installed size 61.2 KiB)─ 38 45 55% 64% 73 84 90 5 100 5550%Downloading perl-IO-HTML (download size 29.3 KiB)
│ │Downloading perl-IO-HTML (download size 29.3 KiB)─ 100%0%Installing perl-IO-HTML-1.004-1.5.noarch.rpm (installed size 45.4 KiB)
│ │Installing perl-IO-HTML-1.004-1.5.noarch.rpm (installed size 45.4 KiB) ─ 41 47 87%99 100 4440%Downloading perl-HTML-Tagset (download size 18.7 KiB)
│ │Downloading perl-HTML-Tagset (download size 18.7 KiB)─ 100%0%Installing perl-HTML-Tagset-3.20-73.19.noarch.rpm (installed size 18.6 KiB
│ │Installing perl-HTML-Tagset-3.20-73.19.noarch.rpm (installed size 18.6 K─ 65% 71 9 9100 3330%Downloading perl-Encode-Locale (download size 23.1 KiB)│ │~iB)│ │Downloading perl-Encode-Locale (download size 23.1 KiB)─ 100%0%Installing perl-Encode-Locale-1.05-1.19.noarch.rpm (installed size 19.3 Ki
│ │Installing perl-Encode-Locale-1.05-1.19.noarch.rpm (installed size 19.3 ─ 60% 76 99100 2220%Downloading perl-Digest-SHA1 (download size 51 KiB)│ │~KiB)│ │Downloading perl-Digest-SHA1 (download size 51 KiB)─ 100%0%Installing perl-Digest-SHA1-2.13-19.29.aarch64.rpm (installed size 147.2 K
│ │Installing perl-Digest-SHA1-2.13-19.29.aarch64.rpm (installed size 147.2─ 5264859% 65 879 100 1110%Downloading perl-Digest-MD4 (download size 34.6 KiB)│ │~ KiB)│ │Downloading perl-Digest-MD4 (download size 34.6 KiB)─ 100%0%Installing perl-Digest-MD4-1.9-5.29.aarch64.rpm (installed size 114.2 KiB)
│ │Installing perl-Digest-MD4-1.9-5.29.aarch64.rpm (installed size 114.2 Ki─ 837 64% 95100 0000%Downloading libsoftokn3-hmac (download size 123.8 KiB)│ │~B)│ │Downloading libsoftokn3-hmac (download size 123.8 KiB)─ 100%0%Installing libsoftokn3-hmac-3.69.1-1.1.aarch64.rpm (installed size 1.8 KiB
│ │Installing libsoftokn3-hmac-3.69.1-1.1.aarch64.rpm (installed size 1.8 K─ 47 94%100 0909090%Downloading fontconfig (download size 72.2 KiB)│ │~iB)│ │Downloading fontconfig (download size 72.2 KiB)─ 100%0%Installing fontconfig-2.13.1-2.9.aarch64.rpm (installed size 703 KiB)
│ │Installing fontconfig-2.13.1-2.9.aarch64.rpm (installed size 703 KiB) ─ 5 10 9 24 9 37 42 47 52%61% 6 75 80 5 90 5 100 78678676, 5080%Downloading libXmu6 (download size 54.8 KiB)
│ │Downloading libXmu6 (download size 54.8 KiB)─ 100%0%Installing libXmu6-1.1.3-1.9.aarch64.rpm (installed size 132.7 KiB)
│ │Installing libXmu6-1.1.3-1.9.aarch64.rpm (installed size 132.7 KiB) ─ 244872%96100 7770%Downloading terminfo-iterm (download size 281.2 KiB)
│ │Downloading terminfo-iterm (download size 281.2 KiB)─ 100%0%Installing terminfo-iterm-6.2.20210911-26.1.aarch64.rpm (installed size 4.
│ │Installing terminfo-iterm-6.2.20210911-26.1.aarch64.rpm (installed size ─ 41 91%7 100 6660%Downloading terminfo (download size 771 KiB)│ │~4.3 KiB)│ │Downloading terminfo (download size 771 KiB)─ 100%0%Installing terminfo-6.2.20210911-26.1.aarch64.rpm (installed size 1.94 MiB
│ │Installing terminfo-6.2.20210911-26.1.aarch64.rpm (installed size 1.94 M─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 55455454, 5050%Downloading ncurses-utils (download size 416.9 KiB)│ │~iB)│ │Downloading ncurses-utils (download size 416.9 KiB)─ 100%0%Installing ncurses-utils-6.2.20210911-26.1.aarch64.rpm (installed size 486
│ │Installing ncurses-utils-6.2.20210911-26.1.aarch64.rpm (installed size 4─ 6 13 20 6 33 40 47 53% 61% 7 74 81 7 9 100 44344343, 5040%Downloading perl-WWW-RobotRules (download size 20.4 KiB)│ │~86.3 KiB)│ │Downloading perl-WWW-RobotRules (download size 20.4 KiB)─ 100%0%Installing perl-WWW-RobotRules-6.02-9.19.noarch.rpm (installed size 24.8 K
│ │Installing perl-WWW-RobotRules-6.02-9.19.noarch.rpm (installed size 24.8─ 43 57% 80%93 9 100 3330%Downloading perl-Net-HTTP (download size 41.5 KiB)│ │~ KiB)│ │Downloading perl-Net-HTTP (download size 41.5 KiB)─ 100%0%Installing perl-Net-HTTP-6.21-1.3.noarch.rpm (installed size 75.2 KiB)
│ │Installing perl-Net-HTTP-6.21-1.3.noarch.rpm (installed size 75.2 KiB) ─ 1335 43 5062% 8693 9 100 2220%Downloading perl-HTTP-Date (download size 28.1 KiB)
│ │Downloading perl-HTTP-Date (download size 28.1 KiB)─ 100%0%Installing perl-HTTP-Date-6.05-1.7.noarch.rpm (installed size 39.6 KiB)
│ │Installing perl-HTTP-Date-6.05-1.7.noarch.rpm (installed size 39.6 KiB) ─ 29 35 47 91%9 100 1110%Downloading perl-X500-DN (download size 17.8 KiB)
│ │Downloading perl-X500-DN (download size 17.8 KiB)─ 100%0%Installing perl-X500-DN-0.29-109.7.aarch64.rpm (installed size 14.2 KiB)
│ │Installing perl-X500-DN-0.29-109.7.aarch64.rpm (installed size 14.2 KiB)─ 17 33 44 54% 65% 72 87 99 100 0000%Downloading psutils (download size 49.3 KiB)
│ │Downloading psutils (download size 49.3 KiB)─ 100%0%Installing psutils-2.04-1.2.aarch64.rpm (installed size 108.5 KiB)
│ │Installing psutils-2.04-1.2.aarch64.rpm (installed size 108.5 KiB) ─ 9 15 20 8 33 4881%6 93 9 100 4994994990%Downloading perl-Crypt-SmbHash (download size 18.7 KiB)
│ │Downloading perl-Crypt-SmbHash (download size 18.7 KiB)─ 100%0%Installing perl-Crypt-SmbHash-0.12-159.8.noarch.rpm (installed size 23.9 K
│ │Installing perl-Crypt-SmbHash-0.12-159.8.noarch.rpm (installed size 23.9─ 78%83 8 99 100 8880%Downloading libcairo2 (download size 576.3 KiB)│ │~ KiB)│ │Downloading libcairo2 (download size 576.3 KiB)─ 100%0%Installing libcairo2-1.16.0-3.7.aarch64.rpm (installed size 1.18 MiB)
│ │Installing libcairo2-1.16.0-3.7.aarch64.rpm (installed size 1.18 MiB) ─ 5 10 5 21 6 31 6 42 47 52%8% 63% 8 73 9 84 9 94 9 100 37237232, 4970%Downloading libXft2 (download size 46 KiB)
│ │Downloading libXft2 (download size 46 KiB)─ 100%0%Installing libXft2-2.3.4-1.1.aarch64.rpm (installed size 131.4 KiB)
│ │Installing libXft2-2.3.4-1.1.aarch64.rpm (installed size 131.4 KiB) ─ 244873%97100 6660%Downloading libXaw7 (download size 185.3 KiB)
│ │Downloading libXaw7 (download size 185.3 KiB)─ 100%0%Installing libXaw7-1.0.14-1.2.aarch64.rpm (installed size 488.1 KiB)
│ │Installing libXaw7-1.0.14-1.2.aarch64.rpm (installed size 488.1 KiB) ─ 6 13 9 26 32 9 45 52%9% 65 72 8 85 91 8 100 25125121, 4950%Downloading psmisc (download size 74 KiB)
│ │Downloading psmisc (download size 74 KiB)─ 100%0%Installing psmisc-23.3-5.3.aarch64.rpm (installed size 429.3 KiB)
│ │Installing psmisc-23.3-5.3.aarch64.rpm (installed size 429.3 KiB) ─ 7 14 23 30 8 46 54% 61% 9 77 85 92 7 100 4440%Downloading procps (download size 290 KiB)
│ │Downloading procps (download size 290 KiB)─ 100%0%Installing procps-3.3.17-5.1.aarch64.rpm (installed size 1.32 MiB)
│ │Installing procps-3.3.17-5.1.aarch64.rpm (installed size 1.32 MiB) ─ 7 12 7 24 9 36 41 46 53% 8% 63% 8 73 8 84 9 94 9 100 130913097109, 4930%Downloading procinfo (download size 41.3 KiB)
│ │Downloading procinfo (download size 41.3 KiB)─ 100%0%Installing procinfo-18-225.5.aarch64.rpm (installed size 91.7 KiB)
│ │Installing procinfo-18-225.5.aarch64.rpm (installed size 91.7 KiB) ─ 36 70% 7 93 9 100 2220%Downloading nano (download size 400.3 KiB)
│ │Downloading nano (download size 400.3 KiB)─ 100%0%Installing nano-5.8-1.1.aarch64.rpm (installed size 1.16 MiB)
│ │Installing nano-5.8-1.1.aarch64.rpm (installed size 1.16 MiB) ─ 6 11 6 22 7 33 9 44 4955% 60% 6 71 6 81 6 91 6 100 01801808, 4910%Downloading libreadline8 (download size 247.2 KiB)
│ │Downloading libreadline8 (download size 247.2 KiB)─ 100%0%Installing libreadline8-8.1-2.8.aarch64.rpm (installed size 511.4 KiB)
│ │Installing libreadline8-8.1-2.8.aarch64.rpm (installed size 511.4 KiB) ─ 6 12 9 25 31 8 44 506% 63% 9 75 81 8 93 9 100 09070907097, 4900%Downloading libedit0 (download size 106.7 KiB)
│ │Downloading libedit0 (download size 106.7 KiB)─ 100%0%Installing libedit0-3.1.snap20180525-4.5.aarch64.rpm (installed size 273.6
│ │Installing libedit0-3.1.snap20180525-4.5.aarch64.rpm (installed size 273─ 11 23 35 46 58% 70% 81 93 8 100 8989890%Downloading joe (download size 537.3 KiB)│ │~.6 KiB)│ │Downloading joe (download size 537.3 KiB)─ 100%0%Installing joe-4.6-2.10.aarch64.rpm (installed size 1.75 MiB)
│ │Installing joe-4.6-2.10.aarch64.rpm (installed size 1.75 MiB) ─ 5 10 5 21 6 32 7 42 47 53% 9% 64 9 74 9 84 9 94 9 100 78578575, 4880%Downloading perl-HTTP-Message (download size 109.8 KiB)
│ │Downloading perl-HTTP-Message (download size 109.8 KiB)─ 100%0%Installing perl-HTTP-Message-6.33-1.2.noarch.rpm (installed size 210 KiB)
│ │Installing perl-HTTP-Message-6.33-1.2.noarch.rpm (installed size 210 KiB─ 5 1736 47 55% 61% 8 73 82 7 92 8 100 7770%Downloading perl-File-Listing (download size 26.8 KiB)│ │~)│ │Downloading perl-File-Listing (download size 26.8 KiB)─ 100%0%Installing perl-File-Listing-6.14-1.4.noarch.rpm (installed size 43.1 KiB)
│ │Installing perl-File-Listing-6.14-1.4.noarch.rpm (installed size 43.1 Ki─ 3 6 4992%9 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.307 GiB│ 486│ 26:13openSUSE-20210927-0│ 1.307 GiB│ 486│ 26:136:13, 4860%Downloading libcairo-gobject2 (download size 66 KiB)│ │~B)│ │Downloading libcairo-gobject2 (download size 66 KiB)─ 100%0%Installing libcairo-gobject2-1.16.0-3.7.aarch64.rpm (installed size 66 KiB
│ │Installing libcairo-gobject2-1.16.0-3.7.aarch64.rpm (installed size 66 K─ 4896%100 52522, 4850%Downloading nftables (download size 84.3 KiB)│ │~iB)│ │Downloading nftables (download size 84.3 KiB)─ 100%0%Installing nftables-1.0.0-1.1.aarch64.rpm (installed size 165.4 KiB)
│ │Installing nftables-1.0.0-1.1.aarch64.rpm (installed size 165.4 KiB) ─ 1635 54% 9% 74 80 98 100 4440%Downloading libxml2-tools (download size 111.7 KiB)
│ │Downloading libxml2-tools (download size 111.7 KiB)─ 100%0%Installing libxml2-tools-2.9.12-1.1.aarch64.rpm (installed size 205.8 KiB)
│ │Installing libxml2-tools-2.9.12-1.1.aarch64.rpm (installed size 205.8 Ki─ 15 31 47 63% 78 94 9 100 6363630%Downloading bash (download size 694.9 KiB)│ │~B)│ │Downloading bash (download size 694.9 KiB)─ 100%0%Installing bash-5.1.8-1.1.aarch64.rpm (installed size 1.27 MiB)
│ │Installing bash-5.1.8-1.1.aarch64.rpm (installed size 1.27 MiB) ─ 5 12 7 22 7 34 9 44 516% 61% 6 73 8 83 8 95 100 52152151, 4820%Downloading augeas (download size 88 KiB)
│ │Downloading augeas (download size 88 KiB)─ 100%0%Installing augeas-1.12.0-4.1.aarch64.rpm (installed size 405.5 KiB)
│ │Installing augeas-1.12.0-4.1.aarch64.rpm (installed size 405.5 KiB) ─ 7 15 24 32 40 4857% 65% 7 83 90 6 100 10100, 4810%Downloading perl-HTTP-Negotiate (download size 20.8 KiB)
│ │Downloading perl-HTTP-Negotiate (download size 20.8 KiB)─ 100%0%Installing perl-HTTP-Negotiate-6.01-9.19.noarch.rpm (installed size 27.9 K
│ │Installing perl-HTTP-Negotiate-6.01-9.19.noarch.rpm (installed size 27.9─ 55% 84%99 100 0000%Downloading perl-HTTP-Cookies (download size 40 KiB)│ │~ KiB)│ │Downloading perl-HTTP-Cookies (download size 40 KiB)─ 100%0%Installing perl-HTTP-Cookies-6.10-1.3.noarch.rpm (installed size 72.6 KiB)
│ │Installing perl-HTTP-Cookies-6.10-1.3.noarch.rpm (installed size 72.6 Ki─ 32 44 4954% 64% 8894 9 100 7979790%Downloading perl-HTML-Parser (download size 114.8 KiB)│ │~B)│ │Downloading perl-HTML-Parser (download size 114.8 KiB)─ 100%0%Installing perl-HTML-Parser-3.76-1.4.aarch64.rpm (installed size 283.4 KiB
│ │Installing perl-HTML-Parser-3.76-1.4.aarch64.rpm (installed size 283.4 K─ 5 10 21 6 40 52%64% 77 82 8 97 100 4848480%Downloading gawk (download size 1.28 MiB)│ │~iB)│ │Downloading gawk (download size 1.28 MiB)─ 100%0%Installing gawk-5.1.0-2.10.aarch64.rpm (installed size 4.06 MiB)
│ │Installing gawk-5.1.0-2.10.aarch64.rpm (installed size 4.06 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 07050705005, 4770%Downloading crypto-policies (download size 52.9 KiB)
│ │Downloading crypto-policies (download size 52.9 KiB)─ 100%0%Installing crypto-policies-20210225.05203d2-1.8.noarch.rpm (installed size
│ │Installing crypto-policies-20210225.05203d2-1.8.noarch.rpm (installed si─ 5 12 8 23517% 62% 7 72 7 82 7 92 8 100 6660%Downloading coreutils (download size 1.05 MiB)│ │~ze 84.8 KiB)│ │Downloading coreutils (download size 1.05 MiB)─ 100%0%Installing coreutils-8.32-8.3.aarch64.rpm (installed size 8.60 MiB)
│ │Installing coreutils-8.32-8.3.aarch64.rpm (installed size 8.60 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 29255:529255:52925:55, 4750%Downloading rpm-config-SUSE (download size 28 KiB)
│ │Downloading rpm-config-SUSE (download size 28 KiB)─ 100%0%Installing rpm-config-SUSE-0.g83-1.1.noarch.rpm (installed size 39.3 KiB)
│ │Installing rpm-config-SUSE-0.g83-1.1.noarch.rpm (installed size 39.3 KiB─ 5 11 9 24 955% 99%100 4440%Downloading ca-certificates (download size 25.1 KiB)│ │~)│ │Downloading ca-certificates (download size 25.1 KiB)─ 100%0%Installing ca-certificates-2+git20210723.27a0476-1.1.noarch.rpm (installed
│ │Installing ca-certificates-2+git20210723.27a0476-1.1.noarch.rpm (install─ 6 14 9 2 37 93%8 100 3330%Downloading rpm (download size 805 KiB)│ │~ed size 27.8 KiB)│ │Downloading rpm (download size 805 KiB)─ 100%0%Installing rpm-4.16.1.3-3.1.aarch64.rpm (installed size 3.40 MiB)
│ │Installing rpm-4.16.1.3-3.1.aarch64.rpm (installed size 3.40 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 89218921891, 4720%Downloading ca-certificates-mozilla (download size 341.6 KiB)
│ │Downloading ca-certificates-mozilla (download size 341.6 KiB) ─ 100%0%Installing ca-certificates-mozilla-2.50-1.1.noarch.rpm (installed size 918
│ │Installing ca-certificates-mozilla-2.50-1.1.noarch.rpm (installed size 9─ 5 12 9 26 33 9 46 53% 60% 7 74 81 8 95 100 81081080, 4710%Downloading ruby-solv (download size 480.7 KiB)│ │~18 KiB)│ │Downloading ruby-solv (download size 480.7 KiB)─ 100%0%Installing ruby-solv-0.7.19-1.3.aarch64.rpm (installed size 1.08 MiB)
│ │Installing ruby-solv-0.7.19-1.3.aarch64.rpm (installed size 1.08 MiB) ─ 5 11 7 23 8 34 40 46 52%7% 63% 9 75 81 6 92 8 100 70487048748, 4700%Downloading libsolv-tools (download size 981.2 KiB)
│ │Downloading libsolv-tools (download size 981.2 KiB)─ 100%0%Installing libsolv-tools-0.7.19-1.3.aarch64.rpm (installed size 5.90 MiB)
│ │Installing libsolv-tools-0.7.19-1.3.aarch64.rpm (installed size 5.90 MiB─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 1691169111, 4690%Downloading librpmbuild9 (download size 170 KiB)│ │~)│ │Downloading librpmbuild9 (download size 170 KiB)─ 100%0%Installing librpmbuild9-4.16.1.3-3.1.aarch64.rpm (installed size 197.8 KiB
│ │Installing librpmbuild9-4.16.1.3-3.1.aarch64.rpm (installed size 197.8 K─ 16 32 4864% 80 97 100 8880%Downloading deltarpm (download size 219.5 KiB)│ │~iB)│ │Downloading deltarpm (download size 219.5 KiB)─ 100%0%Installing deltarpm-3.6.2-1.10.aarch64.rpm (installed size 980.4 KiB)
│ │Installing deltarpm-3.6.2-1.10.aarch64.rpm (installed size 980.4 KiB) ─ 6 13 9 26 33 9 46 518% 64% 71 8 84 91 8 100 070070 800, 4670%Downloading libopenssl1_1 (download size 1.40 MiB)
│ │Downloading libopenssl1_1 (download size 1.40 MiB)─ 100%0%Installing libopenssl1_1-1.1.1l-1.1.aarch64.rpm (installed size 3.54 MiB)
│ │Installing libopenssl1_1-1.1.1l-1.1.aarch64.rpm (installed size 3.54 MiB─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 76636766367636, 4660%Downloading perl-Net-SSLeay (download size 359.8 KiB)│ │~)│ │Downloading perl-Net-SSLeay (download size 359.8 KiB)─ 100%0%Installing perl-Net-SSLeay-1.90-3.2.aarch64.rpm (installed size 1.33 MiB)
│ │Installing perl-Net-SSLeay-1.90-3.2.aarch64.rpm (installed size 1.33 MiB─ 6 11 8 25 30 5 40 47 54% 61% 8 75 80 5 90 6 100 55455454, 4650%Downloading openssh-common (download size 488.5 KiB)│ │~)│ │Downloading openssh-common (download size 488.5 KiB)─ 100%0%Installing openssh-common-8.4p1-7.3.aarch64.rpm (installed size 1.43 MiB)
│ │Installing openssh-common-8.4p1-7.3.aarch64.rpm (installed size 1.43 MiB─ 6 13 9 26 32 7 43 4854% 9% 65 71 6 82 9 95 100 44344343, 4640%Downloading libzck1 (download size 46 KiB)│ │~)│ │Downloading libzck1 (download size 46 KiB)─ 100%0%Installing libzck1-1.1.16-1.1.aarch64.rpm (installed size 132 KiB)
│ │Installing libzck1-1.1.16-1.1.aarch64.rpm (installed size 132 KiB) ─ 244872%96100 33233232, 4630%Downloading libtss2-esys0 (download size 146 KiB)
│ │Downloading libtss2-esys0 (download size 146 KiB)─ 100%0%Installing libtss2-esys0-3.1.0-1.1.aarch64.rpm (installed size 578.5 KiB)
│ │Installing libtss2-esys0-3.1.0-1.1.aarch64.rpm (installed size 578.5 KiB─ 5 11 6 22 7 33 8 44 4955% 60% 6 71 7 82 8 94 9 100 2220%Downloading libsnmp30 (download size 1.01 MiB)Installing libzck1-1.1.16-1.1.aarch64.rpm (installed size 132 KiB)tss2-esys0 (download size 146 KiB)tss2-esys0-3.1.0-1.1.aarch64.rpm (installed size 578.5 KiB~)Downloading libsnmp30 (download size 1.01 MiB)100%0%Installing libsnmp30-5.9-3.2.aarch64.rpm (installed size 4.13 MiB)
│ │Installing libsnmp30-5.9-3.2.aarch64.rpm (installed size 4.13 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 69127691276927, 4610%Downloading libslp1 (download size 58.7 KiB)
│ │Downloading libslp1 (download size 58.7 KiB)─ 100%0%Installing libslp1-2.0.0-18.6.aarch64.rpm (installed size 131 KiB)
│ │Installing libslp1-2.0.0-18.6.aarch64.rpm (installed size 131 KiB) ─ 244873%97100 0000%Downloading libqpdf28 (download size 521.6 KiB)
│ │Downloading libqpdf28 (download size 521.6 KiB)─ 100%0%Installing libqpdf28-10.3.2-1.2.aarch64.rpm (installed size 1.38 MiB)
│ │Installing libqpdf28-10.3.2-1.2.aarch64.rpm (installed size 1.38 MiB) ─ 6 11 8 24 9 36 42 47 54% 60% 5 72 8 83 8 94 9 100 7595759575, 4590%Downloading libldap-2_4-2 (download size 259.1 KiB)
│ │Downloading libldap-2_4-2 (download size 259.1 KiB)─ 100%0%Installing libldap-2_4-2-2.4.59-69.2.aarch64.rpm (installed size 524.4 KiB
│ │Installing libldap-2_4-2-2.4.59-69.2.aarch64.rpm (installed size 524.4 K─ 6 12 8 25 31 7 43 4955% 61% 8 74 80 6 92 8 100 8880%Downloading libkmod2 (download size 68.1 KiB)│ │~iB)│ │Downloading libkmod2 (download size 68.1 KiB)─ 100%0%Installing libkmod2-29-5.1.aarch64.rpm (installed size 130.1 KiB)
│ │Installing libkmod2-29-5.1.aarch64.rpm (installed size 130.1 KiB) ─ 244973%98100 74744, 4570%Downloading libfido2-1 (download size 80.4 KiB)
│ │Downloading libfido2-1 (download size 80.4 KiB)─ 100%0%Installing libfido2-1-1.8.0-1.1.aarch64.rpm (installed size 198.7 KiB)
│ │Installing libfido2-1-1.8.0-1.1.aarch64.rpm (installed size 198.7 KiB) ─ 16 32 4864% 80 96 100 6660%Downloading libevent-2_1-7 (download size 296.6 KiB)
│ │Downloading libevent-2_1-7 (download size 296.6 KiB)─ 100%0%Installing libevent-2_1-7-2.1.12-2.2.aarch64.rpm (installed size 1.13 MiB)
│ │Installing libevent-2_1-7-2.1.12-2.2.aarch64.rpm (installed size 1.13 Mi─ 5 11 6 22 7 33 9 44 505% 61% 7 72 8 84 90 6 100 55355353, 4550%Downloading libarchive13 (download size 367.8 KiB)│ │~B)│ │Downloading libarchive13 (download size 367.8 KiB)─ 100%0%Installing libarchive13-3.5.1-1.3.aarch64.rpm (installed size 868.8 KiB)
│ │Installing libarchive13-3.5.1-1.3.aarch64.rpm (installed size 868.8 KiB)─ 7 14 22 9 36 44 518% 66% 73 80 8 95 100 4242 92, 4540%Downloading krb5 (download size 661.4 KiB)
│ │Downloading krb5 (download size 661.4 KiB)─ 100%0%Installing krb5-1.19.2-2.1.aarch64.rpm (installed size 2.19 MiB)
│ │Installing krb5-1.19.2-2.1.aarch64.rpm (installed size 2.19 MiB) ─ 5 10 5 20 5 30 5 41 46 517% 62% 7 72 7 82 7 92 8 100 33193319319, 4530%Downloading perl-IO-Socket-SSL (download size 223 KiB)
│ │Downloading perl-IO-Socket-SSL (download size 223 KiB)─ 100%0%Installing perl-IO-Socket-SSL-2.072-1.2.noarch.rpm (installed size 605.2 K
│ │Installing perl-IO-Socket-SSL-2.072-1.2.noarch.rpm (installed size 605.2─ 5 10 5 23 8 33 8 44 4954% 9% 65 70 6 82 7 92 8 100 2222220%Downloading openslp (download size 24.4 KiB)│ │~ KiB)│ │Downloading openslp (download size 24.4 KiB)─ 100%0%Installing openslp-2.0.0-18.6.aarch64.rpm (installed size 92 KiB)
│ │Installing openslp-2.0.0-18.6.aarch64.rpm (installed size 92 KiB) ─ 145185%91 7 100 18188, 4510%Downloading libldapcpp1 (download size 85.2 KiB)
│ │Downloading libldapcpp1 (download size 85.2 KiB)─ 100%0%Installing libldapcpp1-0.3.1-6.24.aarch64.rpm (installed size 261.3 KiB)
│ │Installing libldapcpp1-0.3.1-6.24.aarch64.rpm (installed size 261.3 KiB)─ 12 24 36 4961% 73 85 97 100 0000%Downloading libopeniscsiusr0_2_0 (download size 88.8 KiB)
│ │Downloading libopeniscsiusr0_2_0 (download size 88.8 KiB)─ 100%0%Installing libopeniscsiusr0_2_0-2.1.5-80.1.aarch64.rpm (installed size 130
│ │Installing libopeniscsiusr0_2_0-2.1.5-80.1.aarch64.rpm (installed size 1─ 244973%97100 1491491490%Downloading libtirpc3 (download size 110.7 KiB)│ │~30.7 KiB)│ │Downloading libtirpc3 (download size 110.7 KiB)─ 100%0%Installing libtirpc3-1.3.2-2.1.aarch64.rpm (installed size 231.2 KiB)
│ │Installing libtirpc3-1.3.2-2.1.aarch64.rpm (installed size 231.2 KiB) ─ 13 27 41 55% 69% 82 96 100 8880%Downloading libssh4 (download size 213.7 KiB)
│ │Downloading libssh4 (download size 213.7 KiB)─ 100%0%Installing libssh4-0.9.6-1.1.aarch64.rpm (installed size 481.5 KiB)
│ │Installing libssh4-0.9.6-1.1.aarch64.rpm (installed size 481.5 KiB) ─ 6 13 9 26 33 9 46 53% 9% 66 73 9 86 92 9 100 77777, 4470%Downloading perl-libwww-perl (download size 198.6 KiB)
│ │Downloading perl-libwww-perl (download size 198.6 KiB)─ 100%0%Installing perl-libwww-perl-6.56-1.2.noarch.rpm (installed size 466.7 KiB)
│ │Installing perl-libwww-perl-6.56-1.2.noarch.rpm (installed size 466.7 Ki─ 6 11 6 23 8 33 9 46 55% 63% 9 76 81 6 91 6 100 0606060%Downloading libnsl3 (download size 30.2 KiB)│ │~B)│ │Downloading libnsl3 (download size 30.2 KiB)─ 100%0%Installing libnsl3-2.0.0-1.1.aarch64.rpm (installed size 99 KiB)
│ │Installing libnsl3-2.0.0-1.1.aarch64.rpm (installed size 99 KiB) ─ 32 64% 73 99100 5550%Downloading libcurl4 (download size 462.2 KiB)
│ │Downloading libcurl4 (download size 462.2 KiB)─ 100%0%Installing libcurl4-7.79.0-1.1.aarch64.rpm (installed size 650.7 KiB)
│ │Installing libcurl4-7.79.0-1.1.aarch64.rpm (installed size 650.7 KiB) ─ 9 14 9 24 9 34 9 44 4954% 9% 68 73 8 83 8 93 8 100 46466, 4440%Downloading perl-LWP-Protocol-https (download size 26.4 KiB)
│ │Downloading perl-LWP-Protocol-https (download size 26.4 KiB) ─ 100%0%Installing perl-LWP-Protocol-https-6.10-1.4.noarch.rpm (installed size 33.
│ │Installing perl-LWP-Protocol-https-6.10-1.4.noarch.rpm (installed size 3─ 21 34 41 93%9 100 3330%Downloading python38-base (download size 8.69 MiB)│ │~3.3 KiB)│ │Downloading python38-base (download size 8.69 MiB)─ 100%0%Installing python38-base-3.8.12-1.3.aarch64.rpm (installed size 35.21 MiB)
│ │Installing python38-base-3.8.12-1.3.aarch64.rpm (installed size 35.21 Mi─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.225 GiB│ 442│ 20:47openSUSE-20210927-0│ 1.225 GiB│ 442│ 20:46 30250:47, 4420%Downloading libpoppler112 (download size 1.07 MiB)│ │~B)│ │Downloading libpoppler112 (download size 1.07 MiB)─ 100%0%Installing libpoppler112-21.08.0-1.1.aarch64.rpm (installed size 3.29 MiB)
│ │Installing libpoppler112-21.08.0-1.1.aarch64.rpm (installed size 3.29 Mi─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 21321323, 4410%Downloading curl (download size 412.6 KiB)│ │~B)│ │Downloading curl (download size 412.6 KiB)─ 100%0%Installing curl-7.79.0-1.1.aarch64.rpm (installed size 745.6 KiB)
│ │Installing curl-7.79.0-1.1.aarch64.rpm (installed size 745.6 KiB) ─ 8 17 25 34 40 4853% 61% 6 74 82 7 95 100 10210212, 4400%Downloading perl-XML-Parser (download size 223.8 KiB)
│ │Downloading perl-XML-Parser (download size 223.8 KiB)─ 100%0%Installing perl-XML-Parser-2.46-1.11.aarch64.rpm (installed size 696.8 KiB
│ │Installing perl-XML-Parser-2.46-1.11.aarch64.rpm (installed size 696.8 K─ 9 15 23 9 35 40 45 516% 65% 72 81 6 94 9 100 3939390%Downloading libpython3_8-1_0 (download size 1.22 MiB)│ │~iB)│ │Downloading libpython3_8-1_0 (download size 1.22 MiB)─ 100%0%Installing libpython3_8-1_0-3.8.12-1.3.aarch64.rpm (installed size 3.16 Mi
│ │Installing libpython3_8-1_0-3.8.12-1.3.aarch64.rpm (installed size 3.16 ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 188381883811838, 4380%Downloading poppler-tools (download size 319.6 KiB)│ │~MiB)│ │Downloading poppler-tools (download size 319.6 KiB)─ 100%0%Installing poppler-tools-21.08.0-1.1.aarch64.rpm (installed size 1.04 MiB)
│ │Installing poppler-tools-21.08.0-1.1.aarch64.rpm (installed size 1.04 Mi─ 6 12 8 24 30 7 43 4955% 61% 7 74 80 6 92 7 100 77777777, 4370%Downloading libpoppler-cpp0 (download size 169.4 KiB)│ │~B)│ │Downloading libpoppler-cpp0 (download size 169.4 KiB)─ 100%0%Installing libpoppler-cpp0-21.08.0-1.1.aarch64.rpm (installed size 130 KiB
│ │Installing libpoppler-cpp0-21.08.0-1.1.aarch64.rpm (installed size 130 K─ 244973%98100 6666660%Downloading perl-XML-Twig (download size 212.4 KiB)│ │~iB)│ │Downloading perl-XML-Twig (download size 212.4 KiB)─ 100%0%Installing perl-XML-Twig-3.52-2.6.noarch.rpm (installed size 1.10 MiB)
│ │Installing perl-XML-Twig-3.52-2.6.noarch.rpm (installed size 1.10 MiB) ─ 7 13 8 24 30 5 41 46 52%8% 64% 9 75 81 6 92 8 100 55655656, 4350%Downloading python38-six (download size 41.8 KiB)
│ │Downloading python38-six (download size 41.8 KiB)─ 100%0%Installing python38-six-1.16.0-2.1.noarch.rpm (installed size 100.8 KiB)
│ │Installing python38-six-1.16.0-2.1.noarch.rpm (installed size 100.8 KiB)─ 2652%86%97 100 4440%Downloading python38-pyparsing (download size 201.7 KiB)
│ │Downloading python38-pyparsing (download size 201.7 KiB)─ 100%0%Installing python38-pyparsing-2.4.7-3.1.noarch.rpm (installed size 872.7 K
│ │Installing python38-pyparsing-2.4.7-3.1.noarch.rpm (installed size 872.7─ 7 14 21 6 34 41 4853% 8% 65% 73 80 5 92 9 100 43543545, 4330%Downloading python38-ordered-set (download size 21.4 KiB)│ │~ KiB)│ │Downloading python38-ordered-set (download size 21.4 KiB)─ 100%0%Installing python38-ordered-set-4.0.2-1.1.noarch.rpm (installed size 44.7
│ │Installing python38-ordered-set-4.0.2-1.1.noarch.rpm (installed size 44.─ 13509% 9100 2220%Downloading python38-appdirs (download size 24.1 KiB)│ │~7 KiB)│ │Downloading python38-appdirs (download size 24.1 KiB)─ 100%0%Installing python38-appdirs-1.4.4-3.1.noarch.rpm (installed size 84 KiB)
│ │Installing python38-appdirs-1.4.4-3.1.noarch.rpm (installed size 84 KiB)─ 23 47 59% 8893 8 100 1110%Downloading perl-Net-DBus (download size 205.4 KiB)
│ │Downloading perl-Net-DBus (download size 205.4 KiB)─ 100%0%Installing perl-Net-DBus-1.2.0-1.9.aarch64.rpm (installed size 646.3 KiB)
│ │Installing perl-Net-DBus-1.2.0-1.9.aarch64.rpm (installed size 646.3 KiB─ 7 15 20 5 30 5 42 47 52%7% 62% 7 76 81 6 91 6 100 0000%Downloading python38-packaging (download size 77.3 KiB)│ │~)│ │Downloading python38-packaging (download size 77.3 KiB)─ 100%0%Installing python38-packaging-20.9-2.1.noarch.rpm (installed size 284.9 Ki
│ │Installing python38-packaging-20.9-2.1.noarch.rpm (installed size 284.9 ─ 5 10 7 2 33 40 46 53% 8% 64% 7 8 91 8 100 3294329434, 4290%Downloading python38-setuptools (download size 1,005 KiB)│ │~KiB)│ │Downloading python38-setuptools (download size 1,005 KiB)─ 100%0%Installing python38-setuptools-57.4.0-1.1.noarch.rpm (installed size 5.24
│ │Installing python38-setuptools-57.4.0-1.1.noarch.rpm (installed size 5.2─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 08829088290829, 4280%Downloading python38-pip (download size 1.95 MiB)│ │~4 MiB)│ │Downloading python38-pip (download size 1.95 MiB)─ 100%0%Installing python38-pip-20.2.4-1.5.noarch.rpm (installed size 10.37 MiB)
│ │Installing python38-pip-20.2.4-1.5.noarch.rpm (installed size 10.37 MiB)─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 197119711919, 4270%Downloading python38 (download size 104.8 KiB)
│ │Downloading python38 (download size 104.8 KiB)─ 100%0%Installing python38-3.8.12-1.1.aarch64.rpm (installed size 284.4 KiB)
│ │Installing python38-3.8.12-1.1.aarch64.rpm (installed size 284.4 KiB) ─ 11 22 33 44 59% 70 82 93 8 100 68688, 4260%Downloading python38-rpm (download size 61.8 KiB)
│ │Downloading python38-rpm (download size 61.8 KiB)─ 100%0%Installing python38-rpm-4.16.1.3-3.1.aarch64.rpm (installed size 245.2 KiB
│ │Installing python38-rpm-4.16.1.3-3.1.aarch64.rpm (installed size 245.2 K─ 6 21 34 47 60% 73 86 97 100 5550%Downloading python38-curses (download size 128.3 KiB)│ │~iB)│ │Downloading python38-curses (download size 128.3 KiB)─ 100%0%Installing python38-curses-3.8.12-1.1.aarch64.rpm (installed size 250 KiB)
│ │Installing python38-curses-3.8.12-1.1.aarch64.rpm (installed size 250 Ki─ 5 12 24 37 4962% 78 91 7 100 7474740%Downloading python3-solv (download size 538.4 KiB)│ │~B)│ │Downloading python3-solv (download size 538.4 KiB)─ 100%0%Installing python3-solv-0.7.19-1.3.aarch64.rpm (installed size 1.43 MiB)
│ │Installing python3-solv-0.7.19-1.3.aarch64.rpm (installed size 1.43 MiB)─ 5 10 6 21 7 32 8 43 4956% 62% 7 73 8 84 91 7 100 63763767, 4230%Downloading python38-dbm (download size 95.4 KiB)
│ │Downloading python38-dbm (download size 95.4 KiB)─ 100%0%Installing python38-dbm-3.8.12-1.1.aarch64.rpm (installed size 172.7 KiB)
│ │Installing python38-dbm-3.8.12-1.1.aarch64.rpm (installed size 172.7 KiB─ 8 15 33 52%72%90 9 100 26266, 4220%Downloading scout (download size 90 KiB)│ │~)│ │Downloading scout (download size 90 KiB)─ 100%0%Installing scout-0.2.5+20210424.3bff388-1.1.noarch.rpm (installed size 253
│ │Installing scout-0.2.5+20210424.3bff388-1.1.noarch.rpm (installed size 2─ 13 26 31 6 42 47 53% 8% 63% 9 75 80 5 90 5 100 1110%Downloading scout-command-not-found (download size 50.1 KiB)│ │~53 KiB)│ │Downloading scout-command-not-found (download size 50.1 KiB) ─ 100%0%Installing scout-command-not-found-0.2.5+20210424.3bff388-1.1.noarch.rpm (
│ │Installing scout-command-not-found-0.2.5+20210424.3bff388-1.1.noarch.rpm─ 5 11 7 22 7 32 7 42 47 54% 9% 64 9 74 9 84 9 94 9 100 0000%Downloading yp-tools (download size 67.5 KiB)│ │~ (installed size 119.3 KiB)│ │Downloading yp-tools (download size 67.5 KiB)─ 100%0%Installing yp-tools-4.2.3-3.5.aarch64.rpm (installed size 590.3 KiB)
│ │Installing yp-tools-4.2.3-3.5.aarch64.rpm (installed size 590.3 KiB) ─ 5 10 6 21 7 33 9 44 505% 61% 7 72 8 84 9 9 100 5195519555, 4190%Downloading yast2-core (download size 877.6 KiB)
│ │Downloading yast2-core (download size 877.6 KiB)─ 100%0%Installing yast2-core-4.4.0-1.3.aarch64.rpm (installed size 3.59 MiB)
│ │Installing yast2-core-4.4.0-1.3.aarch64.rpm (installed size 3.59 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 18218212, 4180%Downloading xz (download size 145 KiB)
│ │Downloading xz (download size 145 KiB)─ 100%0%Installing xz-5.2.5-2.2.aarch64.rpm (installed size 537.3 KiB)
│ │Installing xz-5.2.5-2.2.aarch64.rpm (installed size 537.3 KiB) ─ 6 11 8 24 30 6 42 47 54% 60% 9 74 9 8 94 9 100 71711, 4170%Downloading wol (download size 47.4 KiB)
│ │Downloading wol (download size 47.4 KiB)─ 100%0%Installing wol-0.7.1-162.14.aarch64.rpm (installed size 172.7 KiB)
│ │Installing wol-0.7.1-162.14.aarch64.rpm (installed size 172.7 KiB) ─ 18 36 58% 70% 82 7 9 100 6660%Downloading wireless-tools (download size 144.9 KiB)
│ │Downloading wireless-tools (download size 144.9 KiB)─ 100%0%Installing wireless-tools-30.pre9-39.6.aarch64.rpm (installed size 676.5 K
│ │Installing wireless-tools-30.pre9-39.6.aarch64.rpm (installed size 676.5─ 9 15 20 9 34 9 44 4958% 63% 8 73 8 83 8 93 8 100 0505050%Downloading which (download size 39.1 KiB)│ │~ KiB)│ │Downloading which (download size 39.1 KiB)─ 100%0%Installing which-2.21-4.32.aarch64.rpm (installed size 119 KiB)
│ │Installing which-2.21-4.32.aarch64.rpm (installed size 119 KiB) ─ 2653% 9% 67 96100 40400, 4140%Downloading vim-data (download size 6.97 MiB)
│ │Downloading vim-data (download size 6.97 MiB)─ 100%0%Installing vim-data-8.2.3408-1.2.noarch.rpm (installed size 29.83 MiB)
│ │Installing vim-data-8.2.3408-1.2.noarch.rpm (installed size 29.83 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 61319:4161319:41 36119:41, 4130%Downloading unzip (download size 108.2 KiB)
│ │Downloading unzip (download size 108.2 KiB)─ 100%0%Installing unzip-6.00-39.1.aarch64.rpm (installed size 331 KiB)
│ │Installing unzip-6.00-39.1.aarch64.rpm (installed size 331 KiB) ─ 9 1 2 3 458% 6 77 88 9 100 20200, 4120%Downloading traceroute (download size 59.6 KiB)
│ │Downloading traceroute (download size 59.6 KiB)─ 100%0%Installing traceroute-2.1.0-1.10.aarch64.rpm (installed size 113.7 KiB)
│ │Installing traceroute-2.1.0-1.10.aarch64.rpm (installed size 113.7 KiB) ─ 2957% 62% 75 92 9 100 0101010%Downloading tnftp (download size 130.4 KiB)
│ │Downloading tnftp (download size 130.4 KiB)─ 100%0%Installing tnftp-20151004-2.5.aarch64.rpm (installed size 290.7 KiB)
│ │Installing tnftp-20151004-2.5.aarch64.rpm (installed size 290.7 KiB) ─ 11 2 32 43 54% 65% 80 91 9 100 0000%Downloading timezone (download size 443.5 KiB)
│ │Downloading timezone (download size 443.5 KiB)─ 100%0%Installing timezone-2021a-2.1.aarch64.rpm (installed size 1.30 MiB)
│ │Installing timezone-2021a-2.1.aarch64.rpm (installed size 1.30 MiB) ─ 5 10 5 20 5 30 5 40 46 516% 61% 6 71 6 81 6 91 6 100 5909395909395939, 4090%Downloading time (download size 45.2 KiB)
│ │Downloading time (download size 45.2 KiB)─ 100%0%Installing time-1.9-1.14.aarch64.rpm (installed size 118 KiB)
│ │Installing time-1.9-1.14.aarch64.rpm (installed size 118 KiB) ─ 2653% 8% 70% 97100 8880%Downloading thin-provisioning-tools (download size 356 KiB)
│ │Downloading thin-provisioning-tools (download size 356 KiB) ─ 100%0%Installing thin-provisioning-tools-0.9.0-2.1.aarch64.rpm (installed size 1
│ │Installing thin-provisioning-tools-0.9.0-2.1.aarch64.rpm (installed size─ 6 12 8 25 31 7 43 506% 62% 8 74 81 7 93 8 100 87887888, 4070%Downloading tar-rmt (download size 59 KiB)│ │~ 1,020.4 KiB)│ │Downloading tar-rmt (download size 59 KiB)─ 100%0%Installing tar-rmt-1.34-2.1.aarch64.rpm (installed size 69.3 KiB)
│ │Installing tar-rmt-1.34-2.1.aarch64.rpm (installed size 69.3 KiB) ─ 46 92%9 100 6660%Downloading systemd-rpm-macros (download size 18.6 KiB)
│ │Downloading systemd-rpm-macros (download size 18.6 KiB)─ 100%0%Installing systemd-rpm-macros-13-1.1.noarch.rpm (installed size 9.2 KiB)
│ │Installing systemd-rpm-macros-13-1.1.noarch.rpm (installed size 9.2 KiB)─ 97%100 5550%Downloading systemd-presets-common-SUSE (download size 14.2 KiB)
│ │Downloading systemd-presets-common-SUSE (download size 14.2 KiB) ─ 100%0%Installing systemd-presets-common-SUSE-15-19.1.noarch.rpm (installed size
│ │Installing systemd-presets-common-SUSE-15-19.1.noarch.rpm (installed siz─ 55% 89%97 100 4440%Downloading systemd-default-settings-branding-openSUSE (download size 9.5│ │~e 4.3 KiB)│ │Downloading systemd-default-settings-branding-openSUSE (download size 9.─ 100%0%Installing systemd-default-settings-branding-openSUSE-0.7-2.1.noarch.rpm (│ │~5 KiB)│ │Installing systemd-default-settings-branding-openSUSE-0.7-2.1.noarch.rpm─ 82%1003330%Downloading strace (download size 458 KiB)│ │~ (installed size 399 B)│ │Downloading strace (download size 458 KiB)─ 100%0%Installing strace-5.14-1.1.aarch64.rpm (installed size 1.57 MiB)
│ │Installing strace-5.14-1.1.aarch64.rpm (installed size 1.57 MiB) ─ 5 11 7 23 9 35 41 47 53% 9% 65 71 7 83 9 94 9 100 62662666, 4020%Downloading sound-theme-freedesktop (download size 378.9 KiB)
│ │Downloading sound-theme-freedesktop (download size 378.9 KiB) ─ 100%0%Installing sound-theme-freedesktop-0.8-9.6.noarch.rpm (installed size 460.
│ │Installing sound-theme-freedesktop-0.8-9.6.noarch.rpm (installed size 46─ 7 14 9 26 33 40 4856% 62% 8 73 80 7 98 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.156 GiB│ 401│ 17:47openSUSE-20210927-0│ 1.156 GiB│ 401│ 17:477:47, 4010%Downloading sharutils (download size 155.4 KiB)│ │~0.4 KiB)│ │Downloading sharutils (download size 155.4 KiB)─ 100%0%Installing sharutils-4.15.2-6.7.aarch64.rpm (installed size 619.2 KiB)
│ │Installing sharutils-4.15.2-6.7.aarch64.rpm (installed size 619.2 KiB) ─ 5 10 5 20 7 32 7 42 4854% 9% 64 70 5 80 5 91 6 100 50650656, 4000%Downloading sg3_utils (download size 849.4 KiB)
│ │Downloading sg3_utils (download size 849.4 KiB)─ 100%0%Installing sg3_utils-1.46-1.2.aarch64.rpm (installed size 5.44 MiB)
│ │Installing sg3_utils-1.46-1.2.aarch64.rpm (installed size 5.44 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 039910399101, 3990%Downloading sed (download size 149.5 KiB)
│ │Downloading sed (download size 149.5 KiB)─ 100%0%Installing sed-4.8-3.5.aarch64.rpm (installed size 259.8 KiB)
│ │Installing sed-4.8-3.5.aarch64.rpm (installed size 259.8 KiB) ─ 12 24 36 4962% 77 85 97 100 8880%Downloading python38-slip (download size 27.6 KiB)
│ │Downloading python38-slip (download size 27.6 KiB)─ 100%0%Installing python38-slip-0.6.5-6.8.noarch.rpm (installed size 50.8 KiB)
│ │Installing python38-slip-0.6.5-6.8.noarch.rpm (installed size 50.8 KiB) ─ 5 18 27 42 53% 85%99 100 7770%Downloading python38-pyudev (download size 92.6 KiB)
│ │Downloading python38-pyudev (download size 92.6 KiB)─ 100%0%Installing python38-pyudev-0.22.0-4.1.noarch.rpm (installed size 482 KiB)
│ │Installing python38-pyudev-0.22.0-4.1.noarch.rpm (installed size 482 KiB─ 5 10 6 21 7 32 7 42 47 52%61% 70 8 83 8 93 9 100 4964964960%Downloading python38-pycurl (download size 108.5 KiB)│ │~)│ │Downloading python38-pycurl (download size 108.5 KiB)─ 100%0%Installing python38-pycurl-7.43.0.6-3.1.aarch64.rpm (installed size 308.7
│ │Installing python38-pycurl-7.43.0.6-3.1.aarch64.rpm (installed size 308.─ 6 1 2 37 4 57% 6 81 8 99 100 5550%Downloading python38-pycparser (download size 226.4 KiB)│ │~7 KiB)│ │Downloading python38-pycparser (download size 226.4 KiB)─ 100%0%Installing python38-pycparser-2.20-1.10.noarch.rpm (installed size 1.32 Mi
│ │Installing python38-pycparser-2.20-1.10.noarch.rpm (installed size 1.32 ─ 5 10 6 21 6 31 6 41 46 516% 62% 8 74 81 6 91 6 100 84398439839, 3940%Downloading python38-pyasn1 (download size 172.8 KiB)│ │~MiB)│ │Downloading python38-pyasn1 (download size 172.8 KiB)─ 100%0%Installing python38-pyasn1-0.4.8-2.1.noarch.rpm (installed size 919.3 KiB)
│ │Installing python38-pyasn1-0.4.8-2.1.noarch.rpm (installed size 919.3 Ki─ 5 11 7 22 7 34 40 45 508% 64% 71 7 85 91 7 100 7373730%Downloading python38-psutil (download size 297 KiB)│ │~B)│ │Downloading python38-psutil (download size 297 KiB)─ 100%0%Installing python38-psutil-5.8.0-2.2.aarch64.rpm (installed size 1.32 MiB)
│ │Installing python38-psutil-5.8.0-2.2.aarch64.rpm (installed size 1.32 Mi─ 6 13 9 24 9 34 40 46 53% 8% 65% 70 5 80 5 90 5 100 52752757, 3920%Downloading python38-ply (download size 111.6 KiB)│ │~B)│ │Downloading python38-ply (download size 111.6 KiB)─ 100%0%Installing python38-ply-3.11-3.14.noarch.rpm (installed size 480 KiB)
│ │Installing python38-ply-3.11-3.14.noarch.rpm (installed size 480 KiB) ─ 7 13 24 3 9 46 53% 62% 9 75 82 91 7 100 1110%Downloading python38-linux-procfs (download size 39 KiB)
│ │Downloading python38-linux-procfs (download size 39 KiB)─ 100%0%Installing python38-linux-procfs-0.6-2.5.noarch.rpm (installed size 125.7
│ │Installing python38-linux-procfs-0.6-2.5.noarch.rpm (installed size 125.─ 2854% 80%98 100 0000%Downloading python38-iniconfig (download size 16.4 KiB)│ │~7 KiB)│ │Downloading python38-iniconfig (download size 16.4 KiB)─ 100%0%Installing python38-iniconfig-1.1.1-1.4.noarch.rpm (installed size 22.1 Ki
│ │Installing python38-iniconfig-1.1.1-1.4.noarch.rpm (installed size 22.1 ─ 1237 42 63% 8492 8 100 8989890%Downloading python38-idna (download size 100.4 KiB)│ │~KiB)│ │Downloading python38-idna (download size 100.4 KiB)─ 100%0%Installing python38-idna-3.2-1.1.noarch.rpm (installed size 701.4 KiB)
│ │Installing python38-idna-3.2-1.1.noarch.rpm (installed size 701.4 KiB) ─ 5 11 6 21 6 35 41 505% 61% 8 74 9 88 97 100 48648646, 3880%Downloading python38-decorator (download size 33.1 KiB)
│ │Downloading python38-decorator (download size 33.1 KiB)─ 100%0%Installing python38-decorator-5.0.9-1.1.noarch.rpm (installed size 60.6 Ki
│ │Installing python38-decorator-5.0.9-1.1.noarch.rpm (installed size 60.6 ─ 24 47 73%91 6 100 7770%Downloading python38-configobj (download size 64.7 KiB)Installing python38-idna-3.2-1.1.noarch.rpm (installed size 701.4 KiB)decorator (download size 33.1 KiB)decorator-5.0.9-1.1.noarch.rpm (installed size 60.6~KiB)Downloading python38-configobj (download size 64.7 KiB)100%0%Installing python38-configobj-5.0.6-3.10.noarch.rpm (installed size 338.5
│ │Installing python38-configobj-5.0.6-3.10.noarch.rpm (installed size 338.─ 9 17 26 34 43 56% 69% 7 86 95 100 6660%Downloading python38-chardet (download size 207.5 KiB)│ │~5 KiB)│ │Downloading python38-chardet (download size 207.5 KiB)─ 100%0%Installing python38-chardet-4.0.0-1.4.noarch.rpm (installed size 1.58 MiB)
│ │Installing python38-chardet-4.0.0-1.4.noarch.rpm (installed size 1.58 Mi─ 5 10 5 21 7 32 7 42 47 53% 8% 63% 8 74 9 84 9 94 9 100 25425424, 3850%Downloading python38-certifi (download size 18.8 KiB)│ │~B)│ │Downloading python38-certifi (download size 18.8 KiB)─ 100%0%Installing python38-certifi-2021.5.30-1.1.noarch.rpm (installed size 8.7 K
│ │Installing python38-certifi-2021.5.30-1.1.noarch.rpm (installed size 8.7─ 31 6 41 47 65% 7 80 5 90 9 100 4440%Downloading python38-asn1crypto (download size 192.1 KiB)│ │~ KiB)│ │Downloading python38-asn1crypto (download size 192.1 KiB)─ 100%0%Installing python38-asn1crypto-1.4.0-2.1.noarch.rpm (installed size 1.21 M
│ │Installing python38-asn1crypto-1.4.0-2.1.noarch.rpm (installed size 1.21─ 5 11 8 25 30 6 41 46 52%8% 63% 9 74 9 84 9 95 100 133133 413, 3830%Downloading python38-apipkg (download size 20.5 KiB)│ │~ MiB)│ │Downloading python38-apipkg (download size 20.5 KiB)─ 100%0%Installing python38-apipkg-1.5-4.4.noarch.rpm (installed size 30 KiB)
│ │Installing python38-apipkg-1.5-4.4.noarch.rpm (installed size 30 KiB) ─ 1439 58% 77%8 95 100 2220%Downloading python38-PySocks (download size 33.7 KiB)
│ │Downloading python38-PySocks (download size 33.7 KiB)─ 100%0%Installing python38-PySocks-1.7.1-1.7.noarch.rpm (installed size 99.6 KiB)
│ │Installing python38-PySocks-1.7.1-1.7.noarch.rpm (installed size 99.6 Ki─ 1536 57% 65% 9100 1110%Downloading python3-tevent (download size 26.1 KiB)│ │~B)│ │Downloading python3-tevent (download size 26.1 KiB)─ 100%0%Installing python3-tevent-0.10.2-1.6.aarch64.rpm (installed size 71.1 KiB)
│ │Installing python3-tevent-0.10.2-1.6.aarch64.rpm (installed size 71.1 Ki─ 44 89%98 100 0000%Downloading python3-tdb (download size 27 KiB)│ │~B)│ │Downloading python3-tdb (download size 27 KiB)─ 100%0%Installing python3-tdb-1.4.3-1.6.aarch64.rpm (installed size 72 KiB)
│ │Installing python3-tdb-1.4.3-1.6.aarch64.rpm (installed size 72 KiB) ─ 4993%9 100 7979790%Downloading python3-talloc (download size 25.7 KiB)
│ │Downloading python3-talloc (download size 25.7 KiB)─ 100%0%Installing python3-talloc-2.3.3-1.1.aarch64.rpm (installed size 133.9 KiB)
│ │Installing python3-talloc-2.3.3-1.1.aarch64.rpm (installed size 133.9 Ki─ 24 47 73%97100 8880%Downloading python3-nftables (download size 23.3 KiB)Installing python3-tdb-1.4.3-1.6.aarch64.rpm (installed size 72 KiB)alloc (download size 25.7 KiB)alloc-2.3.3-1.1.aarch64.rpm (installed size 133.9 Ki~B)Downloading python3-nftables (download size 23.3 KiB)100%0%Installing python3-nftables-1.0.0-1.1.aarch64.rpm (installed size 28.5 KiB
│ │Installing python3-nftables-1.0.0-1.1.aarch64.rpm (installed size 28.5 K─ 55098%100 7770%Downloading python3-ldb (download size 63.9 KiB)│ │~iB)│ │Downloading python3-ldb (download size 63.9 KiB)─ 100%0%Installing python3-ldb-2.3.0-1.2.aarch64.rpm (installed size 209.3 KiB)
│ │Installing python3-ldb-2.3.0-1.2.aarch64.rpm (installed size 209.3 KiB) ─ 15 30 4863% 79 94 9 100 0606060%Downloading python3-apparmor (download size 258.4 KiB)
│ │Downloading python3-apparmor (download size 258.4 KiB)─ 100%0%Installing python3-apparmor-3.0.3-3.2.aarch64.rpm (installed size 837.7 Ki
│ │Installing python3-apparmor-3.0.3-3.2.aarch64.rpm (installed size 837.7 ─ 6 12 8 25 32 7 42 47 52%7% 62% 8 73 9 86 93 8 100 52522, 3750%Downloading pkgconf-pkg-config (download size 15 KiB)│ │~KiB)│ │Downloading pkgconf-pkg-config (download size 15 KiB)─ 100%0%Installing pkgconf-pkg-config-1.8.0-1.1.aarch64.rpm (installed size 896 B)
│ │Installing pkgconf-pkg-config-1.8.0-1.1.aarch64.rpm (installed size 896 ─ 67% 78 91 100 4440%Downloading pinentry (download size 100.5 KiB)│ │~B)│ │Downloading pinentry (download size 100.5 KiB)─ 100%0%Installing pinentry-1.2.0-1.1.aarch64.rpm (installed size 284.8 KiB)
│ │Installing pinentry-1.2.0-1.1.aarch64.rpm (installed size 284.8 KiB) ─ 12 23 35 47 60% 71 82 8 94 9 100 3933933930%Downloading permissions-config (download size 60.1 KiB)
│ │Downloading permissions-config (download size 60.1 KiB)─ 100%0%Installing permissions-config-1550_20210901-29.1.aarch64.rpm (installed si
│ │Installing permissions-config-1550_20210901-29.1.aarch64.rpm (installed ─ 637 65% 97100 2220%Downloading perl-XML-SAX (download size 58 KiB)│ │~size 47 KiB)│ │Downloading perl-XML-SAX (download size 58 KiB)─ 100%0%Installing perl-XML-SAX-1.02-1.8.noarch.rpm (installed size 123 KiB)
│ │Installing perl-XML-SAX-1.02-1.8.noarch.rpm (installed size 123 KiB) ─ 7 21 6 41 54% 60% 9 74 80 5 9 100 1110%Downloading perl-Term-ReadKey (download size 31 KiB)
│ │Downloading perl-Term-ReadKey (download size 31 KiB)─ 100%0%Installing perl-Term-ReadKey-2.38-1.12.aarch64.rpm (installed size 92.7 Ki
│ │Installing perl-Term-ReadKey-2.38-1.12.aarch64.rpm (installed size 92.7 ─ 155084%9 9 100 01011, 3700%Downloading perl-Bootloader (download size 136.3 KiB)│ │~KiB)│ │Downloading perl-Bootloader (download size 136.3 KiB)─ 100%0%Installing perl-Bootloader-0.936-1.2.aarch64.rpm (installed size 443.8 KiB
│ │Installing perl-Bootloader-0.936-1.2.aarch64.rpm (installed size 443.8 K─ 5 11 9 26 34 9 46 54% 60% 6 73 8 9 94 9 100 6969690%Downloading openssh-clients (download size 783.2 KiB)│ │~iB)│ │Downloading openssh-clients (download size 783.2 KiB)─ 100%0%Installing openssh-clients-8.4p1-7.3.aarch64.rpm (installed size 2.21 MiB)
│ │Installing openssh-clients-8.4p1-7.3.aarch64.rpm (installed size 2.21 Mi─ 5 10 5 21 7 32 8 44 4954% 9% 64 70 6 81 6 91 6 100 68296829629, 3680%Downloading openldap2-client (download size 240.6 KiB)│ │~B)│ │Downloading openldap2-client (download size 240.6 KiB)─ 100%0%Installing openldap2-client-2.4.59-69.2.aarch64.rpm (installed size 697 Ki
│ │Installing openldap2-client-2.4.59-69.2.aarch64.rpm (installed size 697 ─ 9 14 9 28 33 8 43 4857% 62% 71 6 81 90 5 100 78788, 3670%Downloading netpbm (download size 2.28 MiB)│ │~KiB)│ │Downloading netpbm (download size 2.28 MiB)─ 100%0%Installing netpbm-10.93.0-1.3.aarch64.rpm (installed size 23.72 MiB)
│ │Installing netpbm-10.93.0-1.3.aarch64.rpm (installed size 23.72 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 136071360751307, 3660%Downloading login_defs (download size 37.7 KiB)
│ │Downloading login_defs (download size 37.7 KiB)─ 100%0%Installing login_defs-4.9-1.1.noarch.rpm (installed size 18.6 KiB)
│ │Installing login_defs-4.9-1.1.noarch.rpm (installed size 18.6 KiB) ─ 60% 99100 5550%Downloading libdevmapper1_03 (download size 236 KiB)
│ │Downloading libdevmapper1_03 (download size 236 KiB)─ 100%0%Installing libdevmapper1_03-1.02.177-3.1.aarch64.rpm (installed size 397.7
│ │Installing libdevmapper1_03-1.02.177-3.1.aarch64.rpm (installed size 397─ 8 16 24 32 40 4856% 64% 72 80 8 96 100 2424240%Downloading libcrack2 (download size 29.7 KiB)│ │~.7 KiB)│ │Downloading libcrack2 (download size 29.7 KiB)─ 100%0%Installing libcrack2-2.9.7-2.1.aarch64.rpm (installed size 66.4 KiB)
│ │Installing libcrack2-2.9.7-2.1.aarch64.rpm (installed size 66.4 KiB) ─ 4896%100 3330%Downloading klogd (download size 50.4 KiB)
│ │Downloading klogd (download size 50.4 KiB)─ 100%0%Installing klogd-1.4.1-793.5.aarch64.rpm (installed size 73.9 KiB)
│ │Installing klogd-1.4.1-793.5.aarch64.rpm (installed size 73.9 KiB) ─ 44 87%99 100 2220%Downloading keyutils (download size 116.7 KiB)
│ │Downloading keyutils (download size 116.7 KiB)─ 100%0%Installing keyutils-1.6.3-3.1.aarch64.rpm (installed size 277 KiB)
│ │Installing keyutils-1.6.3-3.1.aarch64.rpm (installed size 277 KiB) ─ 12 23 35 46 58% 70% 7 82 7 92 7 100 16166, 3610%Downloading issue-generator (download size 26.4 KiB)
│ │Downloading issue-generator (download size 26.4 KiB)─ 100%0%Installing issue-generator-1.13-1.1.noarch.rpm (installed size 27 KiB)
│ │Installing issue-generator-1.13-1.1.noarch.rpm (installed size 27 KiB) ─ 5 18 24 30 89%97 100 0000%Downloading iptables (download size 221 KiB)
│ │Downloading iptables (download size 221 KiB)─ 100%0%Installing iptables-1.8.7-1.3.aarch64.rpm (installed size 632 KiB)
│ │Installing iptables-1.8.7-1.3.aarch64.rpm (installed size 632 KiB) ─ 5 10 7 22 8 33 8 43 4954% 9% 64 9 74 9 84 9 96 100 1591591590%Downloading iproute2 (download size 1.06 MiB)
│ │Downloading iproute2 (download size 1.06 MiB)─ 100%0%Installing iproute2-5.14-1.1.aarch64.rpm (installed size 3.24 MiB)
│ │Installing iproute2-5.14-1.1.aarch64.rpm (installed size 3.24 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 08830883083, 3580%Downloading initviocons (download size 27 KiB)
│ │Downloading initviocons (download size 27 KiB)─ 100%0%Installing initviocons-0.5-105.4.aarch64.rpm (installed size 93.8 KiB)
│ │Installing initviocons-0.5-105.4.aarch64.rpm (installed size 93.8 KiB) ─ 33 67% 72 918 100 7770%Downloading hwinfo (download size 881 KiB)
│ │Downloading hwinfo (download size 881 KiB)─ 100%0%Installing hwinfo-21.76-1.1.aarch64.rpm (installed size 3.19 MiB)
│ │Installing hwinfo-21.76-1.1.aarch64.rpm (installed size 3.19 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 56056050, 3560%Downloading hwdata (download size 1.49 MiB)
│ │Downloading hwdata (download size 1.49 MiB)─ 100%0%Installing hwdata-0.351-1.1.noarch.rpm (installed size 8.16 MiB)
│ │Installing hwdata-0.351-1.1.noarch.rpm (installed size 8.16 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.097 GiB│ 355│ 16:09openSUSE-20210927-0│ 1.097 GiB│ 355│ 16:080976:09, 3550%Downloading hostname (download size 25.9 KiB)
│ │Downloading hostname (download size 25.9 KiB)─ 100%0%Installing hostname-3.23-2.4.aarch64.rpm (installed size 85.4 KiB)
│ │Installing hostname-3.23-2.4.aarch64.rpm (installed size 85.4 KiB) ─ 36 73%949 100 4488, 3540%Downloading hicolor-icon-theme-branding-openSUSE (download size 29 KiB)
│ │Downloading hicolor-icon-theme-branding-openSUSE (download size 29 KiB) ─ 100%0%Installing hicolor-icon-theme-branding-openSUSE-42.1-2.8.noarch.rpm (insta
│ │Installing hicolor-icon-theme-branding-openSUSE-42.1-2.8.noarch.rpm (ins─ 6 12 272%99100 3330%Downloading hdparm (download size 99.9 KiB)│ │~talled size 46.3 KiB)│ │Downloading hdparm (download size 99.9 KiB)─ 100%0%Installing hdparm-9.62-1.2.aarch64.rpm (installed size 207.4 KiB)
│ │Installing hdparm-9.62-1.2.aarch64.rpm (installed size 207.4 KiB) ─ 16 31 46 62% 77 90 9 100 2220%Downloading gzip (download size 143 KiB)
│ │Downloading gzip (download size 143 KiB)─ 100%0%Installing gzip-1.11-1.1.aarch64.rpm (installed size 374.3 KiB)
│ │Installing gzip-1.11-1.1.aarch64.rpm (installed size 374.3 KiB) ─ 1 8 27 35 41 52%60% 8 76 81 6 95 100 6161610%Downloading groff (download size 1.27 MiB)
│ │Downloading groff (download size 1.27 MiB)─ 100%0%Installing groff-1.22.4-5.4.aarch64.rpm (installed size 5.46 MiB)
│ │Installing groff-1.22.4-5.4.aarch64.rpm (installed size 5.46 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 103103 613, 3500%Downloading grep (download size 344.8 KiB)
│ │Downloading grep (download size 344.8 KiB)─ 100%0%Installing grep-3.7-1.1.aarch64.rpm (installed size 958 KiB)
│ │Installing grep-3.7-1.1.aarch64.rpm (installed size 958 KiB) ─ 6 13 20 7 34 40 47 54% 60% 7 73 80 7 95 100 0492049202, 3490%Downloading glibc-locale-base (download size 2.25 MiB)
│ │Downloading glibc-locale-base (download size 2.25 MiB)─ 100%0%Installing glibc-locale-base-2.34-1.1.aarch64.rpm (installed size 23.66 Mi
│ │Installing glibc-locale-base-2.34-1.1.aarch64.rpm (installed size 23.66 ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 6785:46785:4 7675:42, 3480%Downloading gettext-runtime (download size 699.7 KiB)│ │~MiB)│ │Downloading gettext-runtime (download size 699.7 KiB)─ 100%0%Installing gettext-runtime-0.21-2.10.aarch64.rpm (installed size 2.25 MiB)
│ │Installing gettext-runtime-0.21-2.10.aarch64.rpm (installed size 2.25 Mi─ 5 10 5 20 5 31 6 42 47 53% 9% 64 70 5 80 5 90 5 100 57057050, 3470%Downloading elfutils (download size 491.4 KiB)│ │~B)│ │Downloading elfutils (download size 491.4 KiB)─ 100%0%Installing elfutils-0.185-3.1.aarch64.rpm (installed size 3.18 MiB)
│ │Installing elfutils-0.185-3.1.aarch64.rpm (installed size 3.18 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 26372637237, 3460%Downloading ebtables (download size 49.2 KiB)
│ │Downloading ebtables (download size 49.2 KiB)─ 100%0%Installing ebtables-2.0.11-4.4.aarch64.rpm (installed size 306.6 KiB)
│ │Installing ebtables-2.0.11-4.4.aarch64.rpm (installed size 306.6 KiB) ─ 11 2 32 4 54% 65% 76 8 95 100 1515150%Downloading e2fsprogs (download size 989.8 KiB)
│ │Downloading e2fsprogs (download size 989.8 KiB)─ 100%0%Installing e2fsprogs-1.46.4-1.1.aarch64.rpm (installed size 4.77 MiB)
│ │Installing e2fsprogs-1.46.4-1.1.aarch64.rpm (installed size 4.77 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 57435743573, 3440%Downloading debianutils (download size 24.5 KiB)
│ │Downloading debianutils (download size 24.5 KiB)─ 100%0%Installing debianutils-5.4-1.1.aarch64.rpm (installed size 142.5 KiB)
│ │Installing debianutils-5.4-1.1.aarch64.rpm (installed size 142.5 KiB) ─ 22 44 70% 927 100 63263262, 3430%Downloading dbus-1-x11 (download size 29.7 KiB)
│ │Downloading dbus-1-x11 (download size 29.7 KiB)─ 100%0%Installing dbus-1-x11-1.12.20-5.3.aarch64.rpm (installed size 66.7 KiB)
│ │Installing dbus-1-x11-1.12.20-5.3.aarch64.rpm (installed size 66.7 KiB) ─ 4895%100 2220%Downloading crypto-policies-scripts (download size 55.1 KiB)
│ │Downloading crypto-policies-scripts (download size 55.1 KiB) ─ 100%0%Installing crypto-policies-scripts-20210225.05203d2-1.8.noarch.rpm (instal
│ │Installing crypto-policies-scripts-20210225.05203d2-1.8.noarch.rpm (inst─ 9 1 26 33 9 45 53% 62% 71 8 84 9 97 100 1110%Downloading crda (download size 26.3 KiB)│ │~alled size 152.7 KiB)│ │Downloading crda (download size 26.3 KiB)─ 100%0%Installing crda-4.14-1.3.aarch64.rpm (installed size 201.2 KiB)
│ │Installing crda-4.14-1.3.aarch64.rpm (installed size 201.2 KiB) ─ 16 32 4964% 82 97 100 0000%Downloading bzip2 (download size 44.4 KiB)
│ │Downloading bzip2 (download size 44.4 KiB)─ 100%0%Installing bzip2-1.0.8-3.1.aarch64.rpm (installed size 153 KiB)
│ │Installing bzip2-1.0.8-3.1.aarch64.rpm (installed size 153 KiB) ─ 23 44 66% 8792 8 100 3939390%Downloading blog (download size 54.6 KiB)
│ │Downloading blog (download size 54.6 KiB)─ 100%0%Installing blog-2.20-2.2.aarch64.rpm (installed size 355 KiB)
│ │Installing blog-2.20-2.2.aarch64.rpm (installed size 355 KiB) ─ 8 17 2 36 4 55% 65% 74 83 92 8 100 8880%Downloading bash-completion (download size 283.5 KiB)
│ │Downloading bash-completion (download size 283.5 KiB)─ 100%0%Installing bash-completion-2.11-2.3.noarch.rpm (installed size 867.7 KiB)
│ │Installing bash-completion-2.11-2.3.noarch.rpm (installed size 867.7 KiB─ 6 11 6 21 7 32 7 42 47 52%7% 62% 7 72 7 82 8 93 8 100 57157151, 3370%Downloading yast2-xml (download size 48.8 KiB)│ │~)│ │Downloading yast2-xml (download size 48.8 KiB)─ 100%0%Installing yast2-xml-4.4.0-1.2.aarch64.rpm (installed size 155.7 KiB)
│ │Installing yast2-xml-4.4.0-1.2.aarch64.rpm (installed size 155.7 KiB) ─ 24 61% 86 99 100 6660%Downloading logrotate (download size 75.7 KiB)
│ │Downloading logrotate (download size 75.7 KiB)─ 100%0%Installing logrotate-3.18.1-1.1.aarch64.rpm (installed size 191 KiB)
│ │Installing logrotate-3.18.1-1.1.aarch64.rpm (installed size 191 KiB) ─ 17 34 5067% 82 95 100 4545450%Downloading xdg-utils (download size 79.5 KiB)
│ │Downloading xdg-utils (download size 79.5 KiB)─ 100%0%Installing xdg-utils-1.1.3+20201113-1.1.noarch.rpm (installed size 348 KiB
│ │Installing xdg-utils-1.1.3+20201113-1.1.noarch.rpm (installed size 348 K─ 5 14 25 33 42 52%61% 72 8 84 91 6 100 40400, 3340%Downloading less (download size 156 KiB)│ │~iB)│ │Downloading less (download size 156 KiB)─ 100%0%Installing less-590-3.1.aarch64.rpm (installed size 449.7 KiB)
│ │Installing less-590-3.1.aarch64.rpm (installed size 449.7 KiB) ─ 7 14 21 8 35 42 53% 60% 8 75 8 93 8 100 3330%Downloading vim (download size 2.16 MiB)
│ │Downloading vim (download size 2.16 MiB)─ 100%0%Installing vim-8.2.3408-1.2.aarch64.rpm (installed size 4.38 MiB)
│ │Installing vim-8.2.3408-1.2.aarch64.rpm (installed size 4.38 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 49226492264926, 3320%Downloading libicu69 (download size 1.90 MiB)
│ │Downloading libicu69 (download size 1.90 MiB)─ 100%0%Installing libicu69-69.1-2.2.aarch64.rpm (installed size 5.77 MiB)
│ │Installing libicu69-69.1-2.2.aarch64.rpm (installed size 5.77 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 411411 841, 3310%Downloading cpio (download size 117.9 KiB)
│ │Downloading cpio (download size 117.9 KiB)─ 100%0%Installing cpio-2.13-3.1.aarch64.rpm (installed size 272.4 KiB)
│ │Installing cpio-2.13-3.1.aarch64.rpm (installed size 272.4 KiB) ─ 11 23 35 46 61% 72 80 5 97 100 3030300%Downloading systemd-presets-branding-openSUSE (download size 10.5 KiB)
│ │Downloading systemd-presets-branding-openSUSE (download size 10.5 KiB) ─ 100%0%Installing systemd-presets-branding-openSUSE-12.2-18.1.noarch.rpm (install
│ │Installing systemd-presets-branding-openSUSE-12.2-18.1.noarch.rpm (insta─ 282%1002929290%Downloading systemd-default-settings (download size 11.5 KiB) │ │~lled size 267 B)│ │Downloading systemd-default-settings (download size 11.5 KiB) ─ 100%0%Installing systemd-default-settings-0.7-2.1.noarch.rpm (installed size 2 K
│ │Installing systemd-default-settings-0.7-2.1.noarch.rpm (installed size 2─ 15 21 36 5168% 75 90 7 100 8880%Downloading metamail (download size 179.6 KiB)│ │~ KiB)│ │Downloading metamail (download size 179.6 KiB)─ 100%0%Installing metamail-2.7.19-1273.1.aarch64.rpm (installed size 761.5 KiB)
│ │Installing metamail-2.7.19-1273.1.aarch64.rpm (installed size 761.5 KiB)─ 5 10 8 25 30 8 43 52%60% 5 72 7 83 91 6 100 70700, 3270%Downloading python38-cffi (download size 335.1 KiB)
│ │Downloading python38-cffi (download size 335.1 KiB)─ 100%0%Installing python38-cffi-1.14.6-1.1.aarch64.rpm (installed size 1.26 MiB)
│ │Installing python38-cffi-1.14.6-1.1.aarch64.rpm (installed size 1.26 MiB─ 7 12 8 24 30 5 40 47 53% 9% 64 9 75 81 7 93 9 100 26192619219, 3260%Downloading python3-bind (download size 162.7 KiB)│ │~)│ │Downloading python3-bind (download size 162.7 KiB)─ 100%0%Installing python3-bind-9.16.20-1.3.noarch.rpm (installed size 179.5 KiB)
│ │Installing python3-bind-9.16.20-1.3.noarch.rpm (installed size 179.5 KiB─ 7 14 9 24 9 3 46 5160% 5 70 5 81 95 100 1515150%Downloading python38-py (download size 183.5 KiB)│ │~)│ │Downloading python38-py (download size 183.5 KiB)─ 100%0%Installing python38-py-1.10.0-1.3.noarch.rpm (installed size 724.6 KiB)
│ │Installing python38-py-1.10.0-1.3.noarch.rpm (installed size 724.6 KiB) ─ 6 12 9 24 30 6 41 46 52%8% 63% 70 5 82 9 94 9 100 4440%Downloading shared-mime-info (download size 297 KiB)
│ │Downloading shared-mime-info (download size 297 KiB)─ 100%0%Installing shared-mime-info-2.1-2.3.aarch64.rpm (installed size 2.39 MiB)
│ │Installing shared-mime-info-2.1-2.3.aarch64.rpm (installed size 2.39 MiB─ 5 10 5 20 6 31 6 41 47 52%7% 62% 7 70 5 81 6 91 6 100 38363836386, 3230%Downloading permissions (download size 24.3 KiB)Installing python38-py-1.10.0-1.3.noarch.rpm (installed size 724.6 KiB)shared-mime-info (download size 297 KiB)shared-mime-info-2.1-2.3.aarch64.rpm (installed size 2.39 MiB~)Downloading permissions (download size 24.3 KiB)100%0%Installing permissions-20210901.1550-29.1.aarch64.rpm (installed size 0 B)
│ │Installing permissions-20210901.1550-29.1.aarch64.rpm (installed size 0 ─ 100%2220%Downloading perl-XML-LibXML (download size 440.1 KiB)│ │~B)│ │Downloading perl-XML-LibXML (download size 440.1 KiB)─ 100%0%Installing perl-XML-LibXML-2.0207-1.3.aarch64.rpm (installed size 1.57 MiB
│ │Installing perl-XML-LibXML-2.0207-1.3.aarch64.rpm (installed size 1.57 M─ 5 11 7 22 8 34 9 45 506% 62% 8 74 9 84 90 5 100 71571575, 3210%Downloading libparted0 (download size 248.8 KiB)│ │~iB)│ │Downloading libparted0 (download size 248.8 KiB)─ 100%0%Installing libparted0-3.4-1.1.aarch64.rpm (installed size 583.9 KiB)
│ │Installing libparted0-3.4-1.1.aarch64.rpm (installed size 583.9 KiB) ─ 5 11 6 21 7 33 8 44 4955% 60% 6 71 7 82 8 93 9 100 6060600%Downloading libdevmapper-event1_03 (download size 103 KiB)
│ │Downloading libdevmapper-event1_03 (download size 103 KiB)─ 100%0%Installing libdevmapper-event1_03-1.02.177-3.1.aarch64.rpm (installed size
│ │Installing libdevmapper-event1_03-1.02.177-3.1.aarch64.rpm (installed si─ 4896%100 1919190%Downloading libcryptsetup12 (download size 261.2 KiB)│ │~ze 66.6 KiB)│ │Downloading libcryptsetup12 (download size 261.2 KiB)─ 100%0%Installing libcryptsetup12-2.4.1-1.1.aarch64.rpm (installed size 459.2 KiB
│ │Installing libcryptsetup12-2.4.1-1.1.aarch64.rpm (installed size 459.2 K─ 7 13 20 7 34 41 4855% 62% 9 76 83 90 7 100 84844, 3180%Downloading cracklib (download size 61.4 KiB)│ │~iB)│ │Downloading cracklib (download size 61.4 KiB)─ 100%0%Installing cracklib-2.9.7-2.1.aarch64.rpm (installed size 345.7 KiB)
│ │Installing cracklib-2.9.7-2.1.aarch64.rpm (installed size 345.7 KiB) ─ 9 18 27 36 4 55% 61% 6 73 8 83 8 93 8 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 1.035 GiB│ 317│ 14:26openSUSE-20210927-0│ 1.035 GiB│ 317│ 14:2654:26, 3170%Downloading libntfs-3g89 (download size 199 KiB)
│ │Downloading libntfs-3g89 (download size 199 KiB)─ 100%0%Installing libntfs-3g89-2021.8.22-1.1.aarch64.rpm (installed size 414 KiB)
│ │Installing libntfs-3g89-2021.8.22-1.1.aarch64.rpm (installed size 414 Ki─ 7 15 23 30 8 46 54% 61% 9 77 84 92 9 100 65655, 3160%Downloading usbutils (download size 121.9 KiB)│ │~B)│ │Downloading usbutils (download size 121.9 KiB)─ 100%0%Installing usbutils-014-1.1.aarch64.rpm (installed size 458.3 KiB)
│ │Installing usbutils-014-1.1.aarch64.rpm (installed size 458.3 KiB) ─ 6 13 20 7 34 41 4855% 62% 7 75 82 7 98 100 5550%Downloading pciutils (download size 77.4 KiB)
│ │Downloading pciutils (download size 77.4 KiB)─ 100%0%Installing pciutils-3.7.0-4.1.aarch64.rpm (installed size 231.7 KiB)
│ │Installing pciutils-3.7.0-4.1.aarch64.rpm (installed size 231.7 KiB) ─ 13 27 41 54% 70% 84 95 100 4444440%Downloading net-tools (download size 58.8 KiB)
│ │Downloading net-tools (download size 58.8 KiB)─ 100%0%Installing net-tools-2.10-1.4.aarch64.rpm (installed size 307.9 KiB)
│ │Installing net-tools-2.10-1.4.aarch64.rpm (installed size 307.9 KiB) ─ 1 2 32 4 53% 63% 74 85 90 5 100 34344, 3130%Downloading info (download size 208.8 KiB)
│ │Downloading info (download size 208.8 KiB)─ 100%0%Installing info-6.7-2.10.aarch64.rpm (installed size 470.2 KiB)
│ │Installing info-6.7-2.10.aarch64.rpm (installed size 470.2 KiB) ─ 6 13 20 7 34 41 4855% 61% 8 75 82 9 95 100 22920%Downloading zypper-log (download size 128.6 KiB)
│ │Downloading zypper-log (download size 128.6 KiB)─ 100%0%Installing zypper-log-1.14.49-1.1.noarch.rpm (installed size 6.2 KiB)
│ │Installing zypper-log-1.14.49-1.1.noarch.rpm (installed size 6.2 KiB) ─ 81%98 100 1110%Downloading glibc-locale (download size 18.34 MiB)
│ │Downloading glibc-locale (download size 18.34 MiB)─ 100%0%Installing glibc-locale-2.34-1.1.aarch64.rpm (installed size 214.02 MiB)
│ │Installing glibc-locale-2.34-1.1.aarch64.rpm (installed size 214.02 MiB)─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 3 45 80 5 90 5 100 844.37 M01:29844.37 M01:29 47844.37 MiB / 11:29, 310 packages)0%Downloading openssl-1_1 (download size 725.2 KiB)
│ │Downloading openssl-1_1 (download size 725.2 KiB)─ 100%0%Installing openssl-1_1-1.1.1l-1.1.aarch64.rpm (installed size 1.68 MiB)
│ │Installing openssl-1_1-1.1.1l-1.1.aarch64.rpm (installed size 1.68 MiB) ─ 6 12 7 23 8 34 9 45 506% 62% 7 73 8 83 8 93 8 100 2.700982.700982.708, 3090%Downloading libgnutls30 (download size 945 KiB)
│ │Downloading libgnutls30 (download size 945 KiB)─ 100%0%Installing libgnutls30-3.7.2-1.1.aarch64.rpm (installed size 2.14 MiB)
│ │Installing libgnutls30-3.7.2-1.1.aarch64.rpm (installed size 2.14 MiB) ─ 5 10 6 21 6 32 7 42 4853% 8% 64% 70 5 80 6 91 6 100 0.55860.55860.556, 3080%Downloading setserial (download size 25.3 KiB)
│ │Downloading setserial (download size 25.3 KiB)─ 100%0%Installing setserial-2.17-743.20.aarch64.rpm (installed size 78 KiB)
│ │Installing setserial-2.17-743.20.aarch64.rpm (installed size 78 KiB) ─ 4 81%6 91 9 100 4874874870%Downloading rsync (download size 391.5 KiB)
│ │Downloading rsync (download size 391.5 KiB)─ 100%0%Installing rsync-3.2.3-2.4.aarch64.rpm (installed size 863.2 KiB)
│ │Installing rsync-3.2.3-2.4.aarch64.rpm (installed size 863.2 KiB) ─ 7 14 22 9 37 44 519% 66 74 81 6 94 9 100 39.646539.646539.645, 3060%Downloading iscsiuio (download size 137 KiB)
│ │Downloading iscsiuio (download size 137 KiB)─ 100%0%Installing iscsiuio-0.7.8.6-80.1.aarch64.rpm (installed size 197.5 KiB)
│ │Installing iscsiuio-0.7.8.6-80.1.aarch64.rpm (installed size 197.5 KiB) ─ 16 32 4864% 80 96 100 4545450%Downloading libmozjs-78-0 (download size 3.93 MiB)
│ │Downloading libmozjs-78-0 (download size 3.93 MiB)─ 100%0%Installing libmozjs-78-0-78.13.0-1.1.aarch64.rpm (installed size 10.76 MiB
│ │Installing libmozjs-78-0-78.13.0-1.1.aarch64.rpm (installed size 10.76 M─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 828.68 MiB│ 304│ 07:41openSUSE-20210927-0│ 828.68 MiB│ 304│ 07:41 4828.6807:41, 3040%Downloading cpio-mt (download size 52 KiB)│ │~iB)│ │Downloading cpio-mt (download size 52 KiB)─ 100%0%Installing cpio-mt-2.13-3.1.aarch64.rpm (installed size 69.3 KiB)
│ │Installing cpio-mt-2.13-3.1.aarch64.rpm (installed size 69.3 KiB) ─ 46 92%9 100 1313130%Downloading procmail (download size 152.3 KiB)
│ │Downloading procmail (download size 152.3 KiB)─ 100%0%Installing procmail-3.22-277.2.aarch64.rpm (installed size 390.3 KiB)
│ │Installing procmail-3.22-277.2.aarch64.rpm (installed size 390.3 KiB) ─ 8 16 25 33 4 519% 67 73 8 83 9 94 9 100 23202320230, 3020%Downloading python38-cryptography (download size 457 KiB)
│ │Downloading python38-cryptography (download size 457 KiB)─ 100%0%Installing python38-cryptography-3.3.2-2.3.aarch64.rpm (installed size 2.7
│ │Installing python38-cryptography-3.3.2-2.3.aarch64.rpm (installed size 2─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 5.471395.471395.4739, 3010%Downloading python38-brotlipy (download size 27.3 KiB)│ │~.76 MiB)│ │Downloading python38-brotlipy (download size 27.3 KiB)─ 100%0%Installing python38-brotlipy-0.7.0-5.8.aarch64.rpm (installed size 112 KiB
│ │Installing python38-brotlipy-0.7.0-5.8.aarch64.rpm (installed size 112 K─ 11 24876%91 7 100 3603603600%Downloading bind-utils (download size 1.56 MiB)│ │~iB)│ │Downloading bind-utils (download size 1.56 MiB)─ 100%0%Installing bind-utils-9.16.20-1.3.aarch64.rpm (installed size 5.19 MiB)
│ │Installing bind-utils-9.16.20-1.3.aarch64.rpm (installed size 5.19 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 0.1729960.172996490.176, 2990%Downloading pam_unix (download size 70.5 KiB)
│ │Downloading pam_unix (download size 70.5 KiB)─ 100%0%Installing pam_unix-1.5.2-1.1.aarch64.rpm (installed size 66.8 KiB)
│ │Installing pam_unix-1.5.2-1.1.aarch64.rpm (installed size 66.8 KiB) ─ 4895%100 1818180%Downloading iputils (download size 123 KiB)
│ │Downloading iputils (download size 123 KiB)─ 100%0%Installing iputils-20210722-2.1.aarch64.rpm (installed size 560.6 KiB)
│ │Installing iputils-20210722-2.1.aarch64.rpm (installed size 560.6 KiB) ─ 5 11 7 23 9 34 40 46 52%8% 64% 70 5 80 8 94 9 100 19.56719.56719.5670%Downloading parted (download size 224.6 KiB)
│ │Downloading parted (download size 224.6 KiB)─ 100%0%Installing parted-3.4-1.1.aarch64.rpm (installed size 838.6 KiB)
│ │Installing parted-3.4-1.1.aarch64.rpm (installed size 838.6 KiB) ─ 7 15 23 31 6 44 519% 66 74 82 7 92 9 100 8.74658.74658.745, 2960%Downloading device-mapper (download size 198.3 KiB)
│ │Downloading device-mapper (download size 198.3 KiB)─ 100%0%Installing device-mapper-1.02.177-3.1.aarch64.rpm (installed size 343.8 Ki
│ │Installing device-mapper-1.02.177-3.1.aarch64.rpm (installed size 343.8 ─ 12 21 3 40 4959% 68 77 86 93 9 100 4054054050%Downloading libpwquality1 (download size 38.4 KiB)│ │~KiB)│ │Downloading libpwquality1 (download size 38.4 KiB)─ 100%0%Installing libpwquality1-1.4.4-2.3.aarch64.rpm (installed size 99 KiB)
│ │Installing libpwquality1-1.4.4-2.3.aarch64.rpm (installed size 99 KiB) ─ 34 66% 73 99 100 3143143140%Downloading ntfs-3g (download size 148.6 KiB)
│ │Downloading ntfs-3g (download size 148.6 KiB)─ 100%0%Installing ntfs-3g-2021.8.22-1.1.aarch64.rpm (installed size 436.4 KiB)
│ │Installing ntfs-3g-2021.8.22-1.1.aarch64.rpm (installed size 436.4 KiB) ─ 7 14 22 30 8 45 53% 60% 7 75 83 90 6 100 7.8837.8837.8830%Downloading libyui15 (download size 428.8 KiB)
│ │Downloading libyui15 (download size 428.8 KiB)─ 100%0%Installing libyui15-4.2.16-1.1.aarch64.rpm (installed size 779.2 KiB)
│ │Installing libyui15-4.2.16-1.1.aarch64.rpm (installed size 779.2 KiB) ─ 8 16 24 32 41 4957% 65% 73 82 90 5 100 12241224124, 2920%Downloading openssl (download size 9.6 KiB)
│ │Downloading openssl (download size 9.6 KiB)─ 100%0%Installing openssl-1.1.1l-1.1.noarch.rpm (installed size 246 B)
│ │Installing openssl-1.1.1l-1.1.noarch.rpm (installed size 246 B) ─ 2181%1001110%Downloading openSUSE-release (download size 1.81 MiB)
│ │Downloading openSUSE-release (download size 1.81 MiB)─ 100%0%Installing openSUSE-release-20210927-818.1.aarch64.rpm (installed size 230
│ │Installing openSUSE-release-20210927-818.1.aarch64.rpm (installed size 2─ 13 25 30 6 42 47 55% 61% 8 74 82 8 93 8 100 6.9006.9006.9000%Downloading ntfsprogs (download size 295.4 KiB)│ │~30.2 KiB)│ │Downloading ntfsprogs (download size 295.4 KiB)─ 100%0%Installing ntfsprogs-2021.8.22-1.1.aarch64.rpm (installed size 1.17 MiB)
│ │Installing ntfsprogs-2021.8.22-1.1.aarch64.rpm (installed size 1.17 MiB)─ 5 10 6 22 7 33 8 44 4955% 60% 6 72 7 83 8 94 9 100 5.738935.738935.733, 2890%Downloading dirmngr (download size 329.3 KiB)
│ │Downloading dirmngr (download size 329.3 KiB)─ 100%0%Installing dirmngr-2.2.27-2.3.aarch64.rpm (installed size 701.4 KiB)
│ │Installing dirmngr-2.2.27-2.3.aarch64.rpm (installed size 701.4 KiB) ─ 9 18 27 36 45 509% 64 9 74 9 84 9 96 100 0580580580%Downloading tar (download size 254.7 KiB)
│ │Downloading tar (download size 254.7 KiB)─ 100%0%Installing tar-1.34-2.1.aarch64.rpm (installed size 574.7 KiB)
│ │Installing tar-1.34-2.1.aarch64.rpm (installed size 574.7 KiB) ─ 5 11 6 22 7 33 8 44 505% 61% 6 72 7 83 9 97 100 4.4874.4874.4870%Downloading python38-pyOpenSSL (download size 116 KiB)
│ │Downloading python38-pyOpenSSL (download size 116 KiB)─ 100%0%Installing python38-pyOpenSSL-20.0.1-1.3.noarch.rpm (installed size 580 Ki
│ │Installing python38-pyOpenSSL-20.0.1-1.3.noarch.rpm (installed size 580 ─ 5 10 9 25 32 7 46 52%62% 7 72 8 84 9 95 100 3.92623.92623.922, 2860%Downloading pam (download size 445.3 KiB)│ │~KiB)│ │Downloading pam (download size 445.3 KiB)─ 100%0%Installing pam-1.5.2-1.1.aarch64.rpm (installed size 4.05 MiB)
│ │Installing pam-1.5.2-1.1.aarch64.rpm (installed size 4.05 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 09.875009.875009.870, 2850%Downloading kpartx (download size 129.2 KiB)
│ │Downloading kpartx (download size 129.2 KiB)─ 100%0%Installing kpartx-0.8.7+14+suse.5a09bfa-2.1.aarch64.rpm (installed size 91
│ │Installing kpartx-0.8.7+14+suse.5a09bfa-2.1.aarch64.rpm (installed size ─ 5 42 77%98100 7847847840%Downloading cryptsetup (download size 269.7 KiB)│ │~91.8 KiB)│ │Downloading cryptsetup (download size 269.7 KiB)─ 100%0%Installing cryptsetup-2.4.1-1.1.aarch64.rpm (installed size 870 KiB)
│ │Installing cryptsetup-2.4.1-1.1.aarch64.rpm (installed size 870 KiB) ─ 7 14 21 8 35 42 47 52%9% 66 71 6 81 6 92 9 100 8.9338.9338.9330%Downloading libyui-ncurses15 (download size 491.8 KiB)
│ │Downloading libyui-ncurses15 (download size 491.8 KiB)─ 100%0%Installing libyui-ncurses15-4.2.16-1.1.aarch64.rpm (installed size 976 KiB
│ │Installing libyui-ncurses15-4.2.16-1.1.aarch64.rpm (installed size 976 K─ 6 13 9 26 32 9 45 52%8% 65% 72 8 85 91 6 100 7.982297.982297.9829, 2820%Downloading mokutil (download size 49.6 KiB)│ │~iB)│ │Downloading mokutil (download size 49.6 KiB)─ 100%0%Installing mokutil-0.5.0-1.1.aarch64.rpm (installed size 108 KiB)
│ │Installing mokutil-0.5.0-1.1.aarch64.rpm (installed size 108 KiB) ─ 32 61% 6 9100 8718718710%Downloading patterns-base-minimal_base (download size 127 KiB)
│ │Downloading patterns-base-minimal_base (download size 127 KiB) ─ 100%0%Installing patterns-base-minimal_base-20200505-23.1.aarch64.rpm (installed
│ │Installing patterns-base-minimal_base-20200505-23.1.aarch64.rpm (install─ 2974%1000000%Downloading gpg2 (download size 1.91 MiB)│ │~ed size 58 B)│ │Downloading gpg2 (download size 1.91 MiB)─ 100%0%Installing gpg2-2.2.27-2.3.aarch64.rpm (installed size 5.91 MiB)
│ │Installing gpg2-2.2.27-2.3.aarch64.rpm (installed size 5.91 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 1.97961.97961.96, 2790%Downloading yast2-logs (download size 324.6 KiB)
│ │Downloading yast2-logs (download size 324.6 KiB)─ 100%0%Installing yast2-logs-4.4.20-1.1.aarch64.rpm (installed size 3.6 KiB)
│ │Installing yast2-logs-4.4.20-1.1.aarch64.rpm (installed size 3.6 KiB) ─ 96%100 6868680%Downloading python38-urllib3 (download size 217.3 KiB)
│ │Downloading python38-urllib3 (download size 217.3 KiB)─ 100%0%Installing python38-urllib3-1.26.6-1.1.noarch.rpm (installed size 708.7 Ki
│ │Installing python38-urllib3-1.26.6-1.1.noarch.rpm (installed size 708.7 ─ 5 10 5 21 6 34 9 46 516% 61% 6 71 7 83 8 93 8 100 27752775275, 2770%Downloading sudo (download size 1.57 MiB)│ │~KiB)│ │Downloading sudo (download size 1.57 MiB)─ 100%0%Installing sudo-1.9.7p2-1.3.aarch64.rpm (installed size 6.75 MiB)
│ │Installing sudo-1.9.7p2-1.3.aarch64.rpm (installed size 6.75 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 794.5262794.5262794.522, 2760%Downloading shadow (download size 677.3 KiB)
│ │Downloading shadow (download size 677.3 KiB)─ 100%0%Installing shadow-4.9-1.1.aarch64.rpm (installed size 3.62 MiB)
│ │Installing shadow-4.9-1.1.aarch64.rpm (installed size 3.62 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 0.90500.90500.900, 2750%Downloading pam-config (download size 138.2 KiB)
│ │Downloading pam-config (download size 138.2 KiB)─ 100%0%Installing pam-config-1.4-1.1.aarch64.rpm (installed size 694.5 KiB)
│ │Installing pam-config-1.4-1.1.aarch64.rpm (installed size 694.5 KiB) ─ 9 18 27 36 41 506% 61% 6 71 6 81 6 91 6 100 22419224192219, 2740%Downloading kbd (download size 1.91 MiB)
│ │Downloading kbd (download size 1.91 MiB)─ 100%0%Installing kbd-2.4.0-3.1.aarch64.rpm (installed size 5.55 MiB)
│ │Installing kbd-2.4.0-3.1.aarch64.rpm (installed size 5.55 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 84.673684.67365084.676, 2730%Downloading yast2-ycp-ui-bindings (download size 191.1 KiB)
│ │Downloading yast2-ycp-ui-bindings (download size 191.1 KiB) ─ 100%0%Installing yast2-ycp-ui-bindings-4.4.0-1.2.aarch64.rpm (installed size 647
│ │Installing yast2-ycp-ui-bindings-4.4.0-1.2.aarch64.rpm (installed size 6─ 5 14 9 24 9 34 9 44 4954% 9% 64 9 74 9 84 9 98 100 0420420420%Downloading libmediacheck5 (download size 50.9 KiB)│ │~47 KiB)│ │Downloading libmediacheck5 (download size 50.9 KiB)─ 100%0%Installing libmediacheck5-5.4-1.6.aarch64.rpm (installed size 109 KiB)
│ │Installing libmediacheck5-5.4-1.6.aarch64.rpm (installed size 109 KiB) ─ 2958% 64% 97100 3.913.913.910%Downloading libgpgme11 (download size 174.2 KiB)
│ │Downloading libgpgme11 (download size 174.2 KiB)─ 100%0%Installing libgpgme11-1.16.0-2.1.aarch64.rpm (installed size 373.2 KiB)
│ │Installing libgpgme11-1.16.0-2.1.aarch64.rpm (installed size 373.2 KiB) ─ 8 17 25 34 42 519% 68 77 85 92 9 100 57055705575, 2700%Downloading python38-requests (download size 168.2 KiB)
│ │Downloading python38-requests (download size 168.2 KiB)─ 100%0%Installing python38-requests-2.25.1-4.1.noarch.rpm (installed size 503.7 K
│ │Installing python38-requests-2.25.1-4.1.noarch.rpm (installed size 503.7─ 6 11 6 23 9 34 42 4856% 64% 71 8 85 91 7 100 0869086908690%Downloading sudo-plugin-python (download size 179.3 KiB)│ │~ KiB)│ │Downloading sudo-plugin-python (download size 179.3 KiB)─ 100%0%Installing sudo-plugin-python-1.9.7p2-1.3.aarch64.rpm (installed size 145.
│ │Installing sudo-plugin-python-1.9.7p2-1.3.aarch64.rpm (installed size 14─ 22 43 65% 8792 9 100 2.9482.9482.9480%Downloading pam_pwquality (download size 21.3 KiB)│ │~5.7 KiB)│ │Downloading pam_pwquality (download size 21.3 KiB)─ 100%0%Installing pam_pwquality-1.4.4-2.3.aarch64.rpm (installed size 71 KiB)
│ │Installing pam_pwquality-1.4.4-2.3.aarch64.rpm (installed size 71 KiB) ─ 45 89%9 100 8778778770%Downloading yast2-python3-bindings (download size 128.7 KiB)
│ │Downloading yast2-python3-bindings (download size 128.7 KiB) ─ 100%0%Installing yast2-python3-bindings-4.4.1-1.1.aarch64.rpm (installed size 63
│ │Installing yast2-python3-bindings-4.4.1-1.1.aarch64.rpm (installed size ─ 6 14 22 30 5 41 46 516% 61% 6 71 6 81 6 91 6 100 2562562560%Downloading yast2-perl-bindings (download size 85.7 KiB)│ │~636.1 KiB)│ │Downloading yast2-perl-bindings (download size 85.7 KiB)─ 100%0%Installing yast2-perl-bindings-4.4.0-1.3.aarch64.rpm (installed size 319.8
│ │Installing yast2-perl-bindings-4.4.0-1.3.aarch64.rpm (installed size 319─ 14 2 3 4 55% 65% 7 8 91 9 100 1.9351.9351.9350%Downloading checkmedia (download size 18.4 KiB)│ │~.8 KiB)│ │Downloading checkmedia (download size 18.4 KiB)─ 100%0%Installing checkmedia-5.4-1.6.aarch64.rpm (installed size 86.6 KiB)
│ │Installing checkmedia-5.4-1.6.aarch64.rpm (installed size 86.6 KiB) ─ 36 73%99100 8548548540%Downloading wget (download size 392.9 KiB)
│ │Downloading wget (download size 392.9 KiB)─ 100%0%Installing wget-1.21.1-2.1.aarch64.rpm (installed size 796.8 KiB)
│ │Installing wget-1.21.1-2.1.aarch64.rpm (installed size 796.8 KiB) ─ 8 16 24 32 40 4856% 64% 72 9 86 91 9 100 07340734074, 2630%Downloading libzypp (download size 2.79 MiB)
│ │Downloading libzypp (download size 2.79 MiB)─ 100%0%Installing libzypp-17.28.4-1.2.aarch64.rpm (installed size 10.14 MiB)
│ │Installing libzypp-17.28.4-1.2.aarch64.rpm (installed size 10.14 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 770.93 MiB│ 262│ 07:01openSUSE-20210927-0│ 770.93 MiB│ 262│ 07:00170.9301, 2620%Downloading aaa_base (download size 91.6 KiB)
│ │Downloading aaa_base (download size 91.6 KiB)─ 100%0%Installing aaa_base-84.87+git20210823.4c98889-1.1.aarch64.rpm (installed s
│ │Installing aaa_base-84.87+git20210823.4c98889-1.1.aarch64.rpm (installed─ 5 14 23 3 4 4962% 71 80 5 90 8 100 6216210620, 2610%Downloading zypper (download size 1.59 MiB)│ │~ size 318.3 KiB)│ │Downloading zypper (download size 1.59 MiB)─ 100%0%Installing zypper-1.14.49-1.1.aarch64.rpm (installed size 7.22 MiB)
│ │Installing zypper-1.14.49-1.1.aarch64.rpm (installed size 7.22 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 63.3906:5663.3906:5663.396:56, 2600%Downloading yast2-pkg-bindings (download size 373.8 KiB)
│ │Downloading yast2-pkg-bindings (download size 373.8 KiB)─ 100%0%Installing yast2-pkg-bindings-4.4.2-1.2.aarch64.rpm (installed size 1.28 M
│ │Installing yast2-pkg-bindings-4.4.2-1.2.aarch64.rpm (installed size 1.28─ 7 12 7 22 9 34 9 44 516% 61% 6 73 8 83 90 5 100 2.125952.125952.125, 2590%Downloading libyui-ncurses-pkg15 (download size 422 KiB)│ │~ MiB)│ │Downloading libyui-ncurses-pkg15 (download size 422 KiB)─ 100%0%Installing libyui-ncurses-pkg15-4.2.16-1.1.aarch64.rpm (installed size 717
│ │Installing libyui-ncurses-pkg15-4.2.16-1.1.aarch64.rpm (installed size 7─ 8 13 22 31 40 4957% 62% 71 80 9 94 9 100 1.481.481.480%Downloading btrfsprogs (download size 892.9 KiB)│ │~17 KiB)│ │Downloading btrfsprogs (download size 892.9 KiB)─ 100%0%Installing btrfsprogs-5.14-1.1.aarch64.rpm (installed size 3.85 MiB)
│ │Installing btrfsprogs-5.14-1.1.aarch64.rpm (installed size 3.85 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 57.567357.567357.563, 2570%Downloading systemd (download size 3.73 MiB)
│ │Downloading systemd (download size 3.73 MiB)─ 100%0%Installing systemd-249.4-2.2.aarch64.rpm (installed size 15.18 MiB)
│ │Installing systemd-249.4-2.2.aarch64.rpm (installed size 15.18 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 42.3864542.386452%42.3845, 2560%Downloading zypper-needs-restarting (download size 127.3 KiB)
│ │Downloading zypper-needs-restarting (download size 127.3 KiB) ─ 100%0%Installing zypper-needs-restarting-1.14.49-1.1.noarch.rpm (installed size
│ │Installing zypper-needs-restarting-1.14.49-1.1.noarch.rpm (installed siz─ 65% 9100 5550%Downloading purge-kernels-service (download size 9.9 KiB)│ │~e 2.3 KiB)│ │Downloading purge-kernels-service (download size 9.9 KiB)─ 100%0%Installing purge-kernels-service-0-8.1.noarch.rpm (installed size 346 B)
│ │Installing purge-kernels-service-0-8.1.noarch.rpm (installed size 346 B)─ 80%104440%Downloading patterns-base-sw_management (download size 126.9 KiB)
│ │Downloading patterns-base-sw_management (download size 126.9 KiB) ─ 100%0%Installing patterns-base-sw_management-20200505-23.1.aarch64.rpm (installe
│ │Installing patterns-base-sw_management-20200505-23.1.aarch64.rpm (instal─ 2974%1003330%Downloading btrfsmaintenance (download size 36.6 KiB)│ │~led size 59 B)│ │Downloading btrfsmaintenance (download size 36.6 KiB)─ 100%0%Installing btrfsmaintenance-0.5-2.2.noarch.rpm (installed size 56.3 KiB)
│ │Installing btrfsmaintenance-0.5-2.2.noarch.rpm (installed size 56.3 KiB)─ 5 13 8 27 32 61% 70 99100 2222220%Downloading sysuser-shadow (download size 13.1 KiB)
│ │Downloading sysuser-shadow (download size 13.1 KiB)─ 100%0%Installing sysuser-shadow-3.1-3.1.noarch.rpm (installed size 2.5 KiB)
│ │Installing sysuser-shadow-3.1-3.1.noarch.rpm (installed size 2.5 KiB) ─ 95%100 1110%Downloading system-group-hardware (download size 13.5 KiB)
│ │Downloading system-group-hardware (download size 13.5 KiB)─ 100%0%Installing system-group-hardware-20170617-23.1.noarch.rpm (installed size
│ │Installing system-group-hardware-20170617-23.1.noarch.rpm (installed siz─ 80%100000%Downloading libutempter0 (download size 26.5 KiB)│ │~e 358 B)│ │Downloading libutempter0 (download size 26.5 KiB)─ 100%0%Installing libutempter0-1.2.0-3.10.aarch64.rpm (installed size 158.7 KiB)
│ │Installing libutempter0-1.2.0-3.10.aarch64.rpm (installed size 158.7 KiB─ 24 61% 899100 1749174917490%Downloading util-linux (download size 1.12 MiB)│ │~)│ │Downloading util-linux (download size 1.12 MiB)─ 100%0%Installing util-linux-2.36.2-3.1.aarch64.rpm (installed size 7.69 MiB)
│ │Installing util-linux-2.36.2-3.1.aarch64.rpm (installed size 7.69 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 34.488034.488034.480, 2480%Downloading screen (download size 609.5 KiB)
│ │Downloading screen (download size 609.5 KiB)─ 100%0%Installing screen-4.8.0-3.8.aarch64.rpm (installed size 887.8 KiB)
│ │Installing screen-4.8.0-3.8.aarch64.rpm (installed size 887.8 KiB) ─ 7 14 21 8 35 43 505% 60% 7 73 80 6 92 9 100 3.6173.6173.6170%Downloading virt-what (download size 29 KiB)
│ │Downloading virt-what (download size 29 KiB)─ 100%0%Installing virt-what-1.21-2.1.aarch64.rpm (installed size 105 KiB)
│ │Installing virt-what-1.21-2.1.aarch64.rpm (installed size 105 KiB) ─ 3 60% 74 99 100 5656560%Downloading ruby2.7 (download size 3.95 MiB)
│ │Downloading ruby2.7 (download size 3.95 MiB)─ 100%0%Installing ruby2.7-2.7.3-3.1.aarch64.rpm (installed size 20.72 MiB)
│ │Installing ruby2.7-2.7.3-3.1.aarch64.rpm (installed size 20.72 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 12.7952912.795293% 12.7929, 2450%Downloading libsnapper5 (download size 301.9 KiB)
│ │Downloading libsnapper5 (download size 301.9 KiB)─ 100%0%Installing libsnapper5-0.9.0-6.3.aarch64.rpm (installed size 924 KiB)
│ │Installing libsnapper5-0.9.0-6.3.aarch64.rpm (installed size 924 KiB) ─ 7 14 21 7 34 41 4855% 62% 9 76 83 90 7 100 1.8481.8481.88, 2440%Downloading fuse (download size 81.4 KiB)
│ │Downloading fuse (download size 81.4 KiB)─ 100%0%Installing fuse-2.9.9-5.1.aarch64.rpm (installed size 369.8 KiB)
│ │Installing fuse-2.9.9-5.1.aarch64.rpm (installed size 369.8 KiB) ─ 8 17 26 35 44 53% 63% 71 80 5 91 8 100 5235235230%Downloading dbus-1 (download size 230.5 KiB)
│ │Downloading dbus-1 (download size 230.5 KiB)─ 100%0%Installing dbus-1-1.12.20-5.3.aarch64.rpm (installed size 1.04 MiB)
│ │Installing dbus-1-1.12.20-5.3.aarch64.rpm (installed size 1.04 MiB) ─ 6 12 8 24 30 6 43 4955% 61% 8 74 80 5 91 7 100 0.48270.48270.487, 2420%Downloading ruby2.7-rubygem-gem2rpm (download size 53 KiB)
│ │Downloading ruby2.7-rubygem-gem2rpm (download size 53 KiB)─ 100%0%Installing ruby2.7-rubygem-gem2rpm-0.10.1-17.5.aarch64.rpm (installed size
│ │Installing ruby2.7-rubygem-gem2rpm-0.10.1-17.5.aarch64.rpm (installed si─ 25 33 41 46 52%7% 66% 72 7 83 9 9 100 2121210%Downloading systemd-sysvinit (download size 395 KiB)│ │~ze 61.3 KiB)│ │Downloading systemd-sysvinit (download size 395 KiB)─ 100%0%Installing systemd-sysvinit-249.4-2.2.aarch64.rpm (installed size 4.8 KiB)
│ │Installing systemd-sysvinit-249.4-2.2.aarch64.rpm (installed size 4.8 Ki─ 6 12 736 41 62% 8198 100 0000%Downloading system-group-kvm (download size 12.8 KiB)│ │~B)│ │Downloading system-group-kvm (download size 12.8 KiB)─ 100%0%Installing system-group-kvm-20170617-23.1.noarch.rpm (installed size 37 B)
│ │Installing system-group-kvm-20170617-23.1.noarch.rpm (installed size 37 ─ 60% 103939390%Downloading gio-branding-openSUSE (download size 27.8 KiB)│ │~B)│ │Downloading gio-branding-openSUSE (download size 27.8 KiB)─ 100%0%Installing gio-branding-openSUSE-42.1-14.2.noarch.rpm (installed size 8 Ki
│ │Installing gio-branding-openSUSE-42.1-14.2.noarch.rpm (installed size 8 ─ 37 76%98100 1818180%Downloading ruby-common (download size 22.7 KiB)│ │~KiB)│ │Downloading ruby-common (download size 22.7 KiB)─ 100%0%Installing ruby-common-2.6-6.1.noarch.rpm (installed size 38.5 KiB)
│ │Installing ruby-common-2.6-6.1.noarch.rpm (installed size 38.5 KiB) ─ 62858% 71%84 99 100 3773773770%Downloading dracut-mkinitrd-deprecated (download size 163 KiB)
│ │Downloading dracut-mkinitrd-deprecated (download size 163 KiB) ─ 100%0%Installing dracut-mkinitrd-deprecated-055+suse.117.ge5fc2048-1.1.aarch64.r
│ │Installing dracut-mkinitrd-deprecated-055+suse.117.ge5fc2048-1.1.aarch64─ 85%99 100 6666660%Downloading libgio-2_0-0 (download size 878.5 KiB)│ │~.rpm (installed size 14.6 KiB)│ │Downloading libgio-2_0-0 (download size 878.5 KiB)─ 100%0%Installing libgio-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 2.10 MiB)
│ │Installing libgio-2_0-0-2.68.4-2.1.aarch64.rpm (installed size 2.10 MiB)─ 5 10 6 22 8 34 40 46 52%8% 63% 8 74 80 6 92 8 100 08.25608.25608.26, 2350%Downloading ruby2.7-rubygem-unf_ext (download size 578 KiB)
│ │Downloading ruby2.7-rubygem-unf_ext (download size 578 KiB) ─ 100%0%Installing ruby2.7-rubygem-unf_ext-0.0.7.7-1.8.aarch64.rpm (installed size
│ │Installing ruby2.7-rubygem-unf_ext-0.0.7.7-1.8.aarch64.rpm (installed si─ 5 11 6 21 6 31 6 41 46 517% 62% 7 72 8 83 8 93 8 100 6.04456.04456.045, 2340%Downloading ruby2.7-rubygem-ruby-dbus (download size 145.1 KiB) │ │~ze 2.22 MiB)│ │Downloading ruby2.7-rubygem-ruby-dbus (download size 145.1 KiB) ─ 100%0%Installing ruby2.7-rubygem-ruby-dbus-0.16.0-1.2.aarch64.rpm (installed siz
│ │Installing ruby2.7-rubygem-ruby-dbus-0.16.0-1.2.aarch64.rpm (installed s─ 11 23 36 41 516% 63% 71 7 82 8 93 8 100 5.7935.7935.7930%Downloading ruby2.7-rubygem-ruby-augeas (download size 59.5 KiB) │ │~ize 261.9 KiB)│ │Downloading ruby2.7-rubygem-ruby-augeas (download size 59.5 KiB) ─ 100%0%Installing ruby2.7-rubygem-ruby-augeas-0.5.0-3.23.aarch64.rpm (installed s
│ │Installing ruby2.7-rubygem-ruby-augeas-0.5.0-3.23.aarch64.rpm (installed─ 143 54% 72%85 90 8 100 6326326320%Downloading ruby2.7-rubygem-nokogiri (download size 9.77 MiB) │ │~ size 157 KiB)│ │Downloading ruby2.7-rubygem-nokogiri (download size 9.77 MiB) ─ 100%0%Installing ruby2.7-rubygem-nokogiri-1.12.3-1.1.aarch64.rpm (installed size
│ │Installing ruby2.7-rubygem-nokogiri-1.12.3-1.1.aarch64.rpm (installed si─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 693.20118693.201184693.2018, 2310%Downloading ruby2.7-rubygem-fast_gettext (download size 62.7 KiB) │ │~ze 12.43 MiB)│ │Downloading ruby2.7-rubygem-fast_gettext (download size 62.7 KiB) ─ 100%0%Installing ruby2.7-rubygem-fast_gettext-2.0.3-1.5.aarch64.rpm (installed s
│ │Installing ruby2.7-rubygem-fast_gettext-2.0.3-1.5.aarch64.rpm (installed─ 25 38 43 4954% 9% 66 74 87 95 100 1010100%Downloading ruby2.7-rubygem-abstract_method (download size 14.9 KiB) │ │~ size 106 KiB)│ │Downloading ruby2.7-rubygem-abstract_method (download size 14.9 KiB) ─ 100%0%Installing ruby2.7-rubygem-abstract_method-1.2.1-2.19.aarch64.rpm (install
│ │Installing ruby2.7-rubygem-abstract_method-1.2.1-2.19.aarch64.rpm (insta─ 41 52%68% 82 93 9 100 0929092909290%Downloading ruby (download size 8.9 KiB)│ │~lled size 10.6 KiB)│ │Downloading ruby (download size 8.9 KiB)─ 100%0%Installing ruby-2.7-1.5.aarch64.rpm (installed size 84 B)
│ │Installing ruby-2.7-1.5.aarch64.rpm (installed size 84 B)─ 2875%1008880%Downloading suse-module-tools (download size 55.4 KiB)
│ │Downloading suse-module-tools (download size 55.4 KiB)─ 100%0%Installing suse-module-tools-16.0.10+7-1.1.aarch64.rpm (installed size 98.
│ │Installing suse-module-tools-16.0.10+7-1.1.aarch64.rpm (installed size 9─ 7 12 7 22 7 34 40 505% 77%83 99 100 2.972.972.970%Downloading glib2-tools (download size 354.8 KiB)│ │~8.6 KiB)│ │Downloading glib2-tools (download size 354.8 KiB)─ 100%0%Installing glib2-tools-2.68.4-2.1.aarch64.rpm (installed size 615 KiB)
│ │Installing glib2-tools-2.68.4-2.1.aarch64.rpm (installed size 615 KiB) ─ 9 14 20 5 30 6 41 46 52%7% 63% 8 73 9 84 9 96 100 36736737, 2260%Downloading ruby2.7-rubygem-unf (download size 82.8 KiB)
│ │Downloading ruby2.7-rubygem-unf (download size 82.8 KiB)─ 100%0%Installing ruby2.7-rubygem-unf-0.1.4-1.17.aarch64.rpm (installed size 126.
│ │Installing ruby2.7-rubygem-unf-0.1.4-1.17.aarch64.rpm (installed size 12─ 244973%90 5 100 2752752750%Downloading ruby2.7-rubygem-cfa (download size 39.3 KiB)│ │~6.3 KiB)│ │Downloading ruby2.7-rubygem-cfa (download size 39.3 KiB)─ 100%0%Installing ruby2.7-rubygem-cfa-1.0.2-1.7.aarch64.rpm (installed size 62 Ki
│ │Installing ruby2.7-rubygem-cfa-1.0.2-1.7.aarch64.rpm (installed size 62 ─ 264954% 75%87 92 7 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 692.21 MiB│ 224│ 05:57openSUSE-20210927-0│ 692.21 MiB│ 224│ 05:5615:57, 2240%Downloading ruby2.7-rubygem-cheetah (download size 33.6 KiB)│ │~KiB)│ │Downloading ruby2.7-rubygem-cheetah (download size 33.6 KiB) ─ 100%0%Installing ruby2.7-rubygem-cheetah-0.5.2-1.7.aarch64.rpm (installed size 5
│ │Installing ruby2.7-rubygem-cheetah-0.5.2-1.7.aarch64.rpm (installed size─ 27 33 47 94%9 100 1631636166, 2230%Downloading yast2-ruby-bindings (download size 138.1 KiB)│ │~ 50.4 KiB)│ │Downloading yast2-ruby-bindings (download size 138.1 KiB)─ 100%0%Installing yast2-ruby-bindings-4.4.4-1.1.aarch64.rpm (installed size 547 K
│ │Installing yast2-ruby-bindings-4.4.4-1.1.aarch64.rpm (installed size 547─ 6 11 7 23 30 5 41 47 53% 9% 65 71 8 84 9 94 9 100 1.6321.6321.6320%Downloading kmod (download size 103 KiB)│ │~ KiB)│ │Downloading kmod (download size 103 KiB)─ 100%0%Installing kmod-29-5.1.aarch64.rpm (installed size 211.4 KiB)
│ │Installing kmod-29-5.1.aarch64.rpm (installed size 211.4 KiB) ─ 15 29 44 59% 74 89 94 9 100 4214214210%Downloading libpango-1_0-0 (download size 297.8 KiB)
│ │Downloading libpango-1_0-0 (download size 297.8 KiB)─ 100%0%Installing libpango-1_0-0-1.48.10-1.1.aarch64.rpm (installed size 797.7 Ki
│ │Installing libpango-1_0-0-1.48.10-1.1.aarch64.rpm (installed size 797.7 ─ 8 16 24 32 40 4856% 64% 72 80 5 93 9 100 0.64050.64050.645, 2200%Downloading libnm0 (download size 601.4 KiB)│ │~KiB)│ │Downloading libnm0 (download size 601.4 KiB)─ 100%0%Installing libnm0-1.32.10-2.1.aarch64.rpm (installed size 1.45 MiB)
│ │Installing libnm0-1.32.10-2.1.aarch64.rpm (installed size 1.45 MiB) ─ 6 12 7 23 8 34 40 45 518% 64% 71 7 83 8 94 9 100 89.191989.191989.19190%Downloading libgirepository-1_0-1 (download size 116.5 KiB)
│ │Downloading libgirepository-1_0-1 (download size 116.5 KiB) ─ 100%0%Installing libgirepository-1_0-1-1.68.0-3.1.aarch64.rpm (installed size 22
│ │Installing libgirepository-1_0-1-1.68.0-3.1.aarch64.rpm (installed size ─ 14 29 43 57% 72%86 99 100 8.97848.97848.974, 2180%Downloading dconf (download size 79 KiB)│ │~220.5 KiB)│ │Downloading dconf (download size 79 KiB)─ 100%0%Installing dconf-0.40.0-1.3.aarch64.rpm (installed size 261.5 KiB)
│ │Installing dconf-0.40.0-1.3.aarch64.rpm (installed size 261.5 KiB) ─ 12 24 37 5062% 74 86 97 100 7277277270%Downloading ruby2.7-rubygem-simpleidn (download size 239.2 KiB)
│ │Downloading ruby2.7-rubygem-simpleidn (download size 239.2 KiB) ─ 100%0%Installing ruby2.7-rubygem-simpleidn-0.2.1-1.3.aarch64.rpm (installed size
│ │Installing ruby2.7-rubygem-simpleidn-0.2.1-1.3.aarch64.rpm (installed si─ 5 11 7 22 9 35 41 47 52%8% 64% 70 6 82 8 94 9 100 7.6767.6767.6760%Downloading ruby2.7-rubygem-cfa_grub2 (download size 22 KiB)│ │~ze 1.04 MiB)│ │Downloading ruby2.7-rubygem-cfa_grub2 (download size 22 KiB) ─ 100%0%Installing ruby2.7-rubygem-cfa_grub2-2.0.0-1.7.aarch64.rpm (installed size
│ │Installing ruby2.7-rubygem-cfa_grub2-2.0.0-1.7.aarch64.rpm (installed si─ 33 68% 76 85 94 9 100 5555550%Downloading yast2-transfer (download size 42.2 KiB)│ │~ze 24.2 KiB)│ │Downloading yast2-transfer (download size 42.2 KiB)─ 100%0%Installing yast2-transfer-4.4.1-1.2.aarch64.rpm (installed size 159.7 KiB)
│ │Installing yast2-transfer-4.4.1-1.2.aarch64.rpm (installed size 159.7 Ki─ 239 61% 86 99 100 4944944940%Downloading yast2-hardware-detection (download size 165.6 KiB) │ │~B)│ │Downloading yast2-hardware-detection (download size 165.6 KiB) ─ 100%0%Installing yast2-hardware-detection-4.4.0-1.2.aarch64.rpm (installed size
│ │Installing yast2-hardware-detection-4.4.0-1.2.aarch64.rpm (installed siz─ 9 14 23 8 34 40 45 518% 63% 70 9 84 90 5 100 6.83336.83336.833, 2130%Downloading yast2-country-data (download size 91.7 KiB)│ │~e 676.2 KiB)│ │Downloading yast2-country-data (download size 91.7 KiB)─ 100%0%Installing yast2-country-data-4.4.6-1.1.aarch64.rpm (installed size 122.9
│ │Installing yast2-country-data-4.4.6-1.1.aarch64.rpm (installed size 122.─ 5 10 5 20 5 30 5 40 46 516% 61% 8899 100 7127127120%Downloading udev (download size 1.51 MiB)│ │~9 KiB)│ │Downloading udev (download size 1.51 MiB)─ 100%0%Installing udev-249.4-2.2.aarch64.rpm (installed size 8.37 MiB)
│ │Installing udev-249.4-2.2.aarch64.rpm (installed size 8.37 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 78.3414978.341495% 78.3449, 2110%Downloading plymouth-plugin-label (download size 63.4 KiB)
│ │Downloading plymouth-plugin-label (download size 63.4 KiB)─ 100%0%Installing plymouth-plugin-label-0.9.5~git20210406.e554475-1.1.aarch64.rpm
│ │Installing plymouth-plugin-label-0.9.5~git20210406.e554475-1.1.aarch64.r─ 4896%100 2802802800%Downloading girepository-1_0 (download size 234.1 KiB)│ │~pm (installed size 66.4 KiB)│ │Downloading girepository-1_0 (download size 234.1 KiB)─ 100%0%Installing girepository-1_0-1.68.0-3.1.aarch64.rpm (installed size 712.9 K
│ │Installing girepository-1_0-1.68.0-3.1.aarch64.rpm (installed size 712.9─ 8 13 22 31 6 45 53% 8% 67% 76 85 93 9 100 7.5097.5097.5090%Downloading libdconf1 (download size 58 KiB)│ │~ KiB)│ │Downloading libdconf1 (download size 58 KiB)─ 100%0%Installing libdconf1-0.40.0-1.3.aarch64.rpm (installed size 67.5 KiB)
│ │Installing libdconf1-0.40.0-1.3.aarch64.rpm (installed size 67.5 KiB) ─ 47 94%9 100 1818180%Downloading zypper-lifecycle-plugin (download size 18.6 KiB)
│ │Downloading zypper-lifecycle-plugin (download size 18.6 KiB) ─ 100%0%Installing zypper-lifecycle-plugin-0.6.1601367426.843fe7a-1.4.noarch.rpm (
│ │Installing zypper-lifecycle-plugin-0.6.1601367426.843fe7a-1.4.noarch.rpm─ 89%95 100 4974974970%Downloading wsdd (download size 42.8 KiB)│ │~ (installed size 21.2 KiB)│ │Downloading wsdd (download size 42.8 KiB)─ 100%0%Installing wsdd-0.6.4-4.1.noarch.rpm (installed size 81.6 KiB)
│ │Installing wsdd-0.6.4-4.1.noarch.rpm (installed size 81.6 KiB) ─ 41 73%91 9 100 16816818, 2060%Downloading util-linux-systemd (download size 131.1 KiB)
│ │Downloading util-linux-systemd (download size 131.1 KiB)─ 100%0%Installing util-linux-systemd-2.36.2-3.1.aarch64.rpm (installed size 353.5
│ │Installing util-linux-systemd-2.36.2-3.1.aarch64.rpm (installed size 353─ 9 18 27 36 4 55% 64% 73 8 92 7 100 0750750750%Downloading udev-extra-rules (download size 11.3 KiB)│ │~.5 KiB)│ │Downloading udev-extra-rules (download size 11.3 KiB)─ 100%0%Installing udev-extra-rules-0.2-1.1.noarch.rpm (installed size 4.7 KiB)
│ │Installing udev-extra-rules-0.2-1.1.noarch.rpm (installed size 4.7 KiB) ─ 37 69% 8897 100 6464640%Downloading systemd-logger (download size 389.5 KiB)
│ │Downloading systemd-logger (download size 389.5 KiB)─ 100%0%Installing systemd-logger-249.4-2.2.aarch64.rpm (installed size 1 KiB)
│ │Installing systemd-logger-249.4-2.2.aarch64.rpm (installed size 1 KiB) ─ 82%91 100 3330%Downloading system-user-nobody (download size 13 KiB)
│ │Downloading system-user-nobody (download size 13 KiB)─ 100%0%Installing system-user-nobody-20170617-23.1.noarch.rpm (installed size 109
│ │Installing system-user-nobody-20170617-23.1.noarch.rpm (installed size 1─ 5076%1002220%Downloading system-user-man (download size 13 KiB)│ │~09 B)│ │Downloading system-user-man (download size 13 KiB)─ 100%0%Installing system-user-man-20170617-23.1.noarch.rpm (installed size 83 B)
│ │Installing system-user-man-20170617-23.1.noarch.rpm (installed size 83 B─ 65% 1001110%Downloading system-user-mail (download size 13 KiB)│ │~)│ │Downloading system-user-mail (download size 13 KiB)─ 100%0%Installing system-user-mail-20170617-23.1.noarch.rpm (installed size 77 B)
│ │Installing system-user-mail-20170617-23.1.noarch.rpm (installed size 77 ─ 46 75%1000000%Downloading system-user-lp (download size 13 KiB)│ │~B)│ │Downloading system-user-lp (download size 13 KiB)─ 100%0%Installing system-user-lp-20170617-23.1.noarch.rpm (installed size 68 B)
│ │Installing system-user-lp-20170617-23.1.noarch.rpm (installed size 68 B)─ 46 73%1001991991990%Downloading system-user-daemon (download size 13 KiB)
│ │Downloading system-user-daemon (download size 13 KiB)─ 100%0%Installing system-user-daemon-20170617-23.1.noarch.rpm (installed size 63
│ │Installing system-user-daemon-20170617-23.1.noarch.rpm (installed size 6─ 63% 1008880%Downloading system-group-wheel (download size 12.8 KiB)│ │~3 B)│ │Downloading system-group-wheel (download size 12.8 KiB)─ 100%0%Installing system-group-wheel-20170617-23.1.noarch.rpm (installed size 38
│ │Installing system-group-wheel-20170617-23.1.noarch.rpm (installed size 3─ 60% 107770%Downloading system-group-audit (download size 26 KiB)│ │~8 B)│ │Downloading system-group-audit (download size 26 KiB)─ 100%0%Installing system-group-audit-3.0.3-2.3.aarch64.rpm (installed size 38 B)
│ │Installing system-group-audit-3.0.3-2.3.aarch64.rpm (installed size 38 B─ 60% 106660%Downloading snapper (download size 400 KiB)│ │~)│ │Downloading snapper (download size 400 KiB)─ 100%0%Installing snapper-0.9.0-6.3.aarch64.rpm (installed size 1.59 MiB)
│ │Installing snapper-0.9.0-6.3.aarch64.rpm (installed size 1.59 MiB) ─ 5 11 7 23 9 35 41 47 53% 9% 65 70 6 81 6 92 8 100 5.47575.47575.477, 1950%Downloading smartmontools (download size 549.5 KiB)
│ │Downloading smartmontools (download size 549.5 KiB)─ 100%0%Installing smartmontools-7.2-3.1.aarch64.rpm (installed size 1.93 MiB)
│ │Installing smartmontools-7.2-3.1.aarch64.rpm (installed size 1.93 MiB) ─ 5 10 5 20 5 31 6 41 46 517% 62% 7 72 7 82 7 93 8 100 3.54463.54463.546, 1940%Downloading rpcbind (download size 52.8 KiB)
│ │Downloading rpcbind (download size 52.8 KiB)─ 100%0%Installing rpcbind-1.2.6-2.1.aarch64.rpm (installed size 139.4 KiB)
│ │Installing rpcbind-1.2.6-2.1.aarch64.rpm (installed size 139.4 KiB) ─ 22 45 70% 938 100 4034034030%Downloading perl-SNMP (download size 160.6 KiB)
│ │Downloading perl-SNMP (download size 160.6 KiB)─ 100%0%Installing perl-SNMP-5.9-3.2.aarch64.rpm (installed size 707.6 KiB)
│ │Installing perl-SNMP-5.9-3.2.aarch64.rpm (installed size 707.6 KiB) ─ 5 11 9 25 30 5 44 53% 8% 63% 72 81 6 95 100 2.7122.7122.7120%Downloading open-iscsi (download size 422 KiB)
│ │Downloading open-iscsi (download size 422 KiB)─ 100%0%Installing open-iscsi-2.1.5-80.1.aarch64.rpm (installed size 2.03 MiB)
│ │Installing open-iscsi-2.1.5-80.1.aarch64.rpm (installed size 2.03 MiB) ─ 6 11 7 23 8 34 40 45 517% 63% 8 74 80 5 91 7 100 0.69150.69150.695, 1910%Downloading nscd (download size 272.8 KiB)
│ │Downloading nscd (download size 272.8 KiB)─ 100%0%Installing nscd-2.34-1.1.aarch64.rpm (installed size 199.5 KiB)
│ │Installing nscd-2.34-1.1.aarch64.rpm (installed size 199.5 KiB) ─ 17 33 4965% 81 97 100 4040400%Downloading libpolkit0 (download size 76 KiB)
│ │Downloading libpolkit0 (download size 76 KiB)─ 100%0%Installing libpolkit0-0.118-7.1.aarch64.rpm (installed size 199.5 KiB)
│ │Installing libpolkit0-0.118-7.1.aarch64.rpm (installed size 199.5 KiB) ─ 16 32 4965% 81 97 100 3089308930890%Downloading irqbalance (download size 59.2 KiB)
│ │Downloading irqbalance (download size 59.2 KiB)─ 100%0%Installing irqbalance-1.8.0.18.git+2435e8d-2.1.aarch64.rpm (installed size
│ │Installing irqbalance-1.8.0.18.git+2435e8d-2.1.aarch64.rpm (installed si─ 2 41 61% 8297 100 1581581580%Downloading haveged (download size 44.8 KiB)│ │~ze 155.3 KiB)│ │Downloading haveged (download size 44.8 KiB)─ 100%0%Installing haveged-1.9.14-1.3.aarch64.rpm (installed size 108 KiB)
│ │Installing haveged-1.9.14-1.3.aarch64.rpm (installed size 108 KiB) ─ 31 61% 939 100 0470470470%Downloading gpm (download size 179.9 KiB)
│ │Downloading gpm (download size 179.9 KiB)─ 100%0%Installing gpm-1.20.7-18.8.aarch64.rpm (installed size 932.4 KiB)
│ │Installing gpm-1.20.7-18.8.aarch64.rpm (installed size 932.4 KiB) ─ 7 15 22 9 36 43 507% 64% 72 8 83 8 93 8 100 69.136469.136469.134, 1860%Downloading apparmor-parser (download size 576.3 KiB)
│ │Downloading apparmor-parser (download size 576.3 KiB)─ 100%0%Installing apparmor-parser-3.0.3-3.2.aarch64.rpm (installed size 1.81 MiB)
│ │Installing apparmor-parser-3.0.3-3.2.aarch64.rpm (installed size 1.81 Mi─ 5 10 5 20 5 30 6 41 46 516% 62% 7 72 7 82 7 93 8 100 7.32537.32537.323, 1850%Downloading aaa_base-extras (download size 258.4 KiB)│ │~B)│ │Downloading aaa_base-extras (download size 258.4 KiB)─ 100%0%Installing aaa_base-extras-84.87+git20210823.4c98889-1.1.aarch64.rpm (inst
│ │Installing aaa_base-extras-84.87+git20210823.4c98889-1.1.aarch64.rpm (in─ 2 9 35 5164% 9 75 86 97 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 667.31 MiB│ 184│ 05:54openSUSE-20210927-0│ 667.31 MiB│ 184│ 05:54154, 1840%Downloading plymouth-plugin-two-step (download size 77.2 KiB) │ │~stalled size 15 KiB)│ │Downloading plymouth-plugin-two-step (download size 77.2 KiB) ─ 100%0%Installing plymouth-plugin-two-step-0.9.5~git20210406.e554475-1.1.aarch64.
│ │Installing plymouth-plugin-two-step-0.9.5~git20210406.e554475-1.1.aarch6─ 47 94%9 100 2432432430%Downloading typelib-1_0-NM-1_0 (download size 244.5 KiB)│ │~4.rpm (installed size 67.3 KiB)│ │Downloading typelib-1_0-NM-1_0 (download size 244.5 KiB)─ 100%0%Installing typelib-1_0-NM-1_0-1.32.10-2.1.aarch64.rpm (installed size 313.
│ │Installing typelib-1_0-NM-1_0-1.32.10-2.1.aarch64.rpm (installed size 31─ 1 2 3 4 5161% 7 8 9 9 100 6.926.926.920%Downloading python38-gobject (download size 470.9 KiB)│ │~3.2 KiB)│ │Downloading python38-gobject (download size 470.9 KiB)─ 100%0%Installing python38-gobject-3.40.1-2.1.aarch64.rpm (installed size 1.26 Mi
│ │Installing python38-gobject-3.40.1-2.1.aarch64.rpm (installed size 1.26 ─ 5 10 5 20 7 32 7 42 47 52%7% 62% 7 72 7 83 8 93 8 100 5.67135.67135.673, 1810%Downloading gsettings-backend-dconf (download size 54.7 KiB)│ │~MiB)│ │Downloading gsettings-backend-dconf (download size 54.7 KiB) ─ 100%0%Installing gsettings-backend-dconf-0.40.0-1.3.aarch64.rpm (installed size
│ │Installing gsettings-backend-dconf-0.40.0-1.3.aarch64.rpm (installed siz─ 47 94%9 100 1010100%Downloading wicked (download size 1.12 MiB)│ │~e 67.3 KiB)│ │Downloading wicked (download size 1.12 MiB)─ 100%0%Installing wicked-0.6.66-1.1.aarch64.rpm (installed size 3.98 MiB)
│ │Installing wicked-0.6.66-1.1.aarch64.rpm (installed size 3.98 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 1.627911.627911.621, 1790%Downloading man (download size 1.12 MiB)
│ │Downloading man (download size 1.12 MiB)─ 100%0%Installing man-2.9.4-2.1.aarch64.rpm (installed size 2.72 MiB)
│ │Installing man-2.9.4-2.1.aarch64.rpm (installed size 2.72 MiB) ─ 5 10 5 21 6 31 6 41 46 516% 61% 6 71 6 81 6 91 6 100 58.9084958.9084958.9049, 1780%Downloading postfix (download size 1.16 MiB)
│ │Downloading postfix (download size 1.16 MiB)─ 100%0%Installing postfix-3.6.2-4.2.aarch64.rpm (installed size 5.08 MiB)
│ │Installing postfix-3.6.2-4.2.aarch64.rpm (installed size 5.08 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 3.82773.82773.827, 1770%Downloading cups-config (download size 343.8 KiB)
│ │Downloading cups-config (download size 343.8 KiB)─ 100%0%Installing cups-config-2.3.3op2-4.1.aarch64.rpm (installed size 3.57 MiB)
│ │Installing cups-config-2.3.3op2-4.1.aarch64.rpm (installed size 3.57 MiB─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 0.25650.25650.255, 1760%Downloading system-user-bin (download size 12.9 KiB)│ │~)│ │Downloading system-user-bin (download size 12.9 KiB)─ 100%0%Installing system-user-bin-20170617-23.1.noarch.rpm (installed size 66 B)
│ │Installing system-user-bin-20170617-23.1.noarch.rpm (installed size 66 B─ 63% 1005550%Downloading audit (download size 262.1 KiB)│ │~)│ │Downloading audit (download size 262.1 KiB)─ 100%0%Installing audit-3.0.3-2.3.aarch64.rpm (installed size 1.02 MiB)
│ │Installing audit-3.0.3-2.3.aarch64.rpm (installed size 1.02 MiB) ─ 6 12 8 24 31 7 43 4956% 62% 8 74 80 5 90 6 100 49.234449.234449.234, 1740%Downloading snapper-zypp-plugin (download size 108.5 KiB)
│ │Downloading snapper-zypp-plugin (download size 108.5 KiB)─ 100%0%Installing snapper-zypp-plugin-0.9.0-6.3.aarch64.rpm (installed size 263.1
│ │Installing snapper-zypp-plugin-0.9.0-6.3.aarch64.rpm (installed size 263─ 12 24 36 4961% 73 85 97 100 8.9738.9738.9730%Downloading nfs-client (download size 338.9 KiB)│ │~.1 KiB)│ │Downloading nfs-client (download size 338.9 KiB)─ 100%0%Installing nfs-client-2.5.4-26.1.aarch64.rpm (installed size 1.31 MiB)
│ │Installing nfs-client-2.5.4-26.1.aarch64.rpm (installed size 1.31 MiB) ─ 5 10 5 20 5 31 6 42 47 52%7% 62% 7 72 7 82 7 92 7 100 7.6627.6626% 7.6620%Downloading net-snmp (download size 475.4 KiB)
│ │Downloading net-snmp (download size 475.4 KiB)─ 100%0%Installing net-snmp-5.9-3.2.aarch64.rpm (installed size 2.42 MiB)
│ │Installing net-snmp-5.9-3.2.aarch64.rpm (installed size 2.42 MiB) ─ 6 11 6 21 7 32 7 43 4853% 9% 64 9 74 9 84 90 5 100 5.25125.25125.252, 1710%Downloading polkit (download size 131.2 KiB)
│ │Downloading polkit (download size 131.2 KiB)─ 100%0%Installing polkit-0.118-7.1.aarch64.rpm (installed size 592.6 KiB)
│ │Installing polkit-0.118-7.1.aarch64.rpm (installed size 592.6 KiB) ─ 5 10 6 21 7 32 8 44 505% 61% 6 71 7 82 7 92 7 100 4.6704.6704.6700%Downloading irqbalance-ui (download size 34.2 KiB)
│ │Downloading irqbalance-ui (download size 34.2 KiB)─ 100%0%Installing irqbalance-ui-1.8.0.18.git+2435e8d-2.1.aarch64.rpm (installed s
│ │Installing irqbalance-ui-1.8.0.18.git+2435e8d-2.1.aarch64.rpm (installed─ 47 94%9 100 0690690690%Downloading apparmor-abstractions (download size 111.3 KiB)│ │~ size 67.3 KiB)│ │Downloading apparmor-abstractions (download size 111.3 KiB) ─ 100%0%Installing apparmor-abstractions-3.0.3-3.2.noarch.rpm (installed size 146.
│ │Installing apparmor-abstractions-3.0.3-3.2.noarch.rpm (installed size 14─ 5 13 8 23 8 33 8 43 4853% 8% 63% 8 73 8 83 8 93 8 100 4684684680%Downloading google-poppins-fonts (download size 983.7 KiB)│ │~6.6 KiB)│ │Downloading google-poppins-fonts (download size 983.7 KiB)─ 100%0%Installing google-poppins-fonts-4.003-1.2.noarch.rpm (installed size 2.94
│ │Installing google-poppins-fonts-4.003-1.2.noarch.rpm (installed size 2.9─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 1.52701.52701.520, 1670%Downloading google-opensans-fonts (download size 778.1 KiB)│ │~4 MiB)│ │Downloading google-opensans-fonts (download size 778.1 KiB) ─ 100%0%Installing google-opensans-fonts-20180610-1.7.noarch.rpm (installed size 2
│ │Installing google-opensans-fonts-20180610-1.7.noarch.rpm (installed size─ 5 10 5 20 5 31 6 41 47 52%8% 64% 70 5 80 5 91 7 100 39.363939.363939.339, 1660%Downloading dracut (download size 455.4 KiB)│ │~ 2.20 MiB)│ │Downloading dracut (download size 455.4 KiB)─ 100%0%Installing dracut-055+suse.117.ge5fc2048-1.1.aarch64.rpm (installed size 1
│ │Installing dracut-055+suse.117.ge5fc2048-1.1.aarch64.rpm (installed size─ 5 10 5 20 5 30 5 40 45 505% 60% 6 71 7 83 9 95 100 7.85587.85587.858, 1650%Downloading dmraid (download size 141.2 KiB)│ │~ 1.47 MiB)│ │Downloading dmraid (download size 141.2 KiB)─ 100%0%Installing dmraid-1.0.0.rc16-42.4.aarch64.rpm (installed size 528.1 KiB)
│ │Installing dmraid-1.0.0.rc16-42.4.aarch64.rpm (installed size 528.1 KiB)─ 6 12 8 24 30 6 42 4854% 61% 8 74 80 6 91 6 100 3443443440%Downloading cantarell-fonts (download size 384 KiB)
│ │Downloading cantarell-fonts (download size 384 KiB)─ 100%0%Installing cantarell-fonts-0.301-1.3.noarch.rpm (installed size 704.7 KiB)
│ │Installing cantarell-fonts-0.301-1.3.noarch.rpm (installed size 704.7 Ki─ 6 11 6 21 30 5 40 45 509% 64 73 82 91 6 100 6.6536.6536.6530%Downloading adobe-sourcesanspro-fonts (download size 847.3 KiB) │ │~B)│ │Downloading adobe-sourcesanspro-fonts (download size 847.3 KiB) ─ 100%0%Installing adobe-sourcesanspro-fonts-2.045-2.1.noarch.rpm (installed size
│ │Installing adobe-sourcesanspro-fonts-2.045-2.1.noarch.rpm (installed siz─ 5 10 6 21 7 33 8 44 4954% 9% 65 70 5 80 5 90 6 100 4.54274.54274.547, 1620%Downloading adobe-sourcecodepro-fonts (download size 833.9 KiB) │ │~e 2.10 MiB)│ │Downloading adobe-sourcecodepro-fonts (download size 833.9 KiB) ─ 100%0%Installing adobe-sourcecodepro-fonts-2.030-3.4.noarch.rpm (installed size
│ │Installing adobe-sourcecodepro-fonts-2.030-3.4.noarch.rpm (installed siz─ 5 11 6 21 7 32 8 44 4954% 60% 5 70 6 81 7 92 8 100 2.75162.75162.756, 1610%Downloading python38-gobject-cairo (download size 93 KiB)│ │~e 1.80 MiB)│ │Downloading python38-gobject-cairo (download size 93 KiB)─ 100%0%Installing python38-gobject-cairo-3.40.1-2.1.aarch64.rpm (installed size 6
│ │Installing python38-gobject-cairo-3.40.1-2.1.aarch64.rpm (installed size─ 4896%100 6806806800%Downloading python38-dbus-python (download size 146.7 KiB)│ │~ 66.4 KiB)│ │Downloading python38-dbus-python (download size 146.7 KiB)─ 100%0%Installing python38-dbus-python-1.2.18-1.1.aarch64.rpm (installed size 579
│ │Installing python38-dbus-python-1.2.18-1.1.aarch64.rpm (installed size 5─ 5 10 5 20 6 32 7 43 4854% 9% 6 74 80 5 90 5 100 1159511595115, 1590%Downloading wicked-service (download size 71.2 KiB)│ │~79.9 KiB)│ │Downloading wicked-service (download size 71.2 KiB)─ 100%0%Installing wicked-service-0.6.66-1.1.aarch64.rpm (installed size 9.4 KiB)
│ │Installing wicked-service-0.6.66-1.1.aarch64.rpm (installed size 9.4 KiB─ 8 13 8 23 9 3 91%6 100 8880%Downloading patterns-base-documentation (download size 126.9 KiB) │ │~)│ │Downloading patterns-base-documentation (download size 126.9 KiB) ─ 100%0%Installing patterns-base-documentation-20200505-23.1.aarch64.rpm (installe
│ │Installing patterns-base-documentation-20200505-23.1.aarch64.rpm (instal─ 2974%1007770%Downloading mailx (download size 338.8 KiB)│ │~led size 59 B)│ │Downloading mailx (download size 338.8 KiB)─ 100%0%Installing mailx-12.5-31.3.aarch64.rpm (installed size 620.3 KiB)
│ │Installing mailx-12.5-31.3.aarch64.rpm (installed size 620.3 KiB) ─ 5 10 5 20 5 30 6 41 46 516% 61% 6 72 9 84 93 8 100 1.5061.5067% 1.5060%Downloading libcups2 (download size 415 KiB)
│ │Downloading libcups2 (download size 415 KiB)─ 100%0%Installing libcups2-2.3.3op2-4.1.aarch64.rpm (installed size 706 KiB)
│ │Installing libcups2-2.3.3op2-4.1.aarch64.rpm (installed size 706 KiB) ─ 9 18 27 36 45 54% 63% 72 7 86 95 100 0.8150.8150.8150%Downloading openssh-server (download size 543 KiB)
│ │Downloading openssh-server (download size 543 KiB)─ 100%0%Installing openssh-server-8.4p1-7.3.aarch64.rpm (installed size 1,000 KiB)
│ │Installing openssh-server-8.4p1-7.3.aarch64.rpm (installed size 1,000 Ki─ 6 13 20 6 32 9 45 518% 64% 71 7 83 90 6 100 29.834429.834429.834, 1540%Downloading autofs (download size 346.7 KiB)│ │~B)│ │Downloading autofs (download size 346.7 KiB)─ 100%0%Installing autofs-5.1.7-2.1.aarch64.rpm (installed size 1.88 MiB)
│ │Installing autofs-5.1.7-2.1.aarch64.rpm (installed size 1.88 MiB) ─ 6 11 6 21 6 32 7 42 47 52%8% 63% 8 73 8 83 8 93 8 100 7.96337.96337.963, 1530%Downloading polkit-default-privs (download size 45.8 KiB)
│ │Downloading polkit-default-privs (download size 45.8 KiB)─ 100%0%Installing polkit-default-privs-1550+20210818.b0c41fd-1.1.noarch.rpm (inst
│ │Installing polkit-default-privs-1550+20210818.b0c41fd-1.1.noarch.rpm (in─ 24 3 55% 64% 89 9 100 8128128120%Downloading apparmor-profiles (download size 432.5 KiB)│ │~stalled size 156.6 KiB)│ │Downloading apparmor-profiles (download size 432.5 KiB)─ 100%0%Installing apparmor-profiles-3.0.3-3.2.noarch.rpm (installed size 1.52 MiB
│ │Installing apparmor-profiles-3.0.3-3.2.noarch.rpm (installed size 1.52 M─ 6 12 8 23 9 34 9 45 516% 62% 7 73 8 84 9 94 9 100 6.29126.29126.292, 1510%Downloading kernel-firmware-usb-network (download size 790.2 KiB) │ │~iB)│ │Downloading kernel-firmware-usb-network (download size 790.2 KiB) ─ 100%0%Installing kernel-firmware-usb-network-20210901-1.1.noarch.rpm (installed
│ │Installing kernel-firmware-usb-network-20210901-1.1.noarch.rpm (installe─ 5 13 20 8 36 43 4854% 62% 70 5 82 90 8 100 5.405.405.400%Downloading kernel-firmware-ueagle (download size 851 KiB)│ │~d size 813.3 KiB)│ │Downloading kernel-firmware-ueagle (download size 851 KiB)─ 100%0%Installing kernel-firmware-ueagle-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-ueagle-20210901-1.1.noarch.rpm (installed siz─ 5 12 8 25 30 7 44 52%9% 67 74 9 87 94 9 100 4.644914.644914.641, 1490%Downloading kernel-firmware-ti (download size 4.38 MiB)│ │~e 878.4 KiB)│ │Downloading kernel-firmware-ti (download size 4.38 MiB)─ 100%0%Installing kernel-firmware-ti-20210901-1.1.noarch.rpm (installed size 4.39
│ │Installing kernel-firmware-ti-20210901-1.1.noarch.rpm (installed size 4.─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 620.25 MiB│ 148│ 05:27openSUSE-20210927-0│ 620.25 MiB│ 148│ 05:260.2527, 1480%Downloading kernel-firmware-sound (download size 3.11 MiB)│ │~39 MiB)│ │Downloading kernel-firmware-sound (download size 3.11 MiB)─ 100%0%Installing kernel-firmware-sound-20210901-1.1.noarch.rpm (installed size 3
│ │Installing kernel-firmware-sound-20210901-1.1.noarch.rpm (installed size─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 17.067417.067417.064, 1470%Downloading kernel-firmware-serial (download size 452.5 KiB)│ │~ 3.18 MiB)│ │Downloading kernel-firmware-serial (download size 452.5 KiB) ─ 100%0%Installing kernel-firmware-serial-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-serial-20210901-1.1.noarch.rpm (installed siz─ 5 10 5 20 5 30 5 40 45 506% 66% 73 9 85 91 7 100 6.5566.5566.5560%Downloading kernel-firmware-realtek (download size 1.16 MiB) │ │~e 520 KiB)│ │Downloading kernel-firmware-realtek (download size 1.16 MiB) ─ 100%0%Installing kernel-firmware-realtek-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-realtek-20210901-1.1.noarch.rpm (installed si─ 5 10 5 21 7 33 8 44 507% 62% 8 74 9 84 90 6 100 5.4155.4155.4150%Downloading kernel-firmware-radeon (download size 1.65 MiB)│ │~ze 1.15 MiB)│ │Downloading kernel-firmware-radeon (download size 1.65 MiB) ─ 100%0%Installing kernel-firmware-radeon-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-radeon-20210901-1.1.noarch.rpm (installed siz─ 6 11 6 21 6 32 8 43 4853% 8% 64% 9 75 80 5 91 7 100 3.80433.80433.803, 1440%Downloading kernel-firmware-qlogic (download size 12.19 MiB) │ │~e 1.61 MiB)│ │Downloading kernel-firmware-qlogic (download size 12.19 MiB) ─ 100%0%Installing kernel-firmware-qlogic-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-qlogic-20210901-1.1.noarch.rpm (installed siz─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 01.6331601.6331601.6316, 1430%Downloading kernel-firmware-qcom (download size 13.52 MiB)│ │~e 12.17 MiB)│ │Downloading kernel-firmware-qcom (download size 13.52 MiB)─ 100%0%Installing kernel-firmware-qcom-20210901-1.1.noarch.rpm (installed size 13
│ │Installing kernel-firmware-qcom-20210901-1.1.noarch.rpm (installed size ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 588.12209588.122098588.1209, 1420%Downloading kernel-firmware-prestera (download size 25.85 MiB) │ │~13.51 MiB)│ │Downloading kernel-firmware-prestera (download size 25.85 MiB) ─ 100%0%Installing kernel-firmware-prestera-20210901-1.1.noarch.rpm (installed siz
│ │Installing kernel-firmware-prestera-20210901-1.1.noarch.rpm (installed s─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 562.34 MiB│ 141│ 04:48openSUSE-20210927-0│ 562.34 MiB│ 141│ 04:489% 62.344:48, 1410%Downloading kernel-firmware-platform (download size 820.7 KiB) │ │~ize 25.78 MiB)│ │Downloading kernel-firmware-platform (download size 820.7 KiB) ─ 100%0%Installing kernel-firmware-platform-20210901-1.1.noarch.rpm (installed siz
│ │Installing kernel-firmware-platform-20210901-1.1.noarch.rpm (installed s─ 7 13 8 24 9 35 42 4956% 63% 8 75 80 7 94 9 100 1.48071.48071.487, 1400%Downloading kernel-firmware-nvidia (download size 1.13 MiB)│ │~ize 882.6 KiB)│ │Downloading kernel-firmware-nvidia (download size 1.13 MiB) ─ 100%0%Installing kernel-firmware-nvidia-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-nvidia-20210901-1.1.noarch.rpm (installed siz─ 5 10 5 20 5 30 6 42 4955% 60% 5 72 7 82 8 93 8 100 0.34390.34390.34390%Downloading kernel-firmware-nfp (download size 4.62 MiB)│ │~e 1.14 MiB)│ │Downloading kernel-firmware-nfp (download size 4.62 MiB)─ 100%0%Installing kernel-firmware-nfp-20210901-1.1.noarch.rpm (installed size 4.6
│ │Installing kernel-firmware-nfp-20210901-1.1.noarch.rpm (installed size 4─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 55.708455.708455.704, 1380%Downloading kernel-firmware-network (download size 3.47 MiB)│ │~.64 MiB)│ │Downloading kernel-firmware-network (download size 3.47 MiB) ─ 100%0%Installing kernel-firmware-network-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-network-20210901-1.1.noarch.rpm (installed si─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 2.19732.197360 2.193, 1370%Downloading kernel-firmware-mwifiex (download size 5.40 MiB)│ │~ze 3.52 MiB)│ │Downloading kernel-firmware-mwifiex (download size 5.40 MiB) ─ 100%0%Installing kernel-firmware-mwifiex-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-mwifiex-20210901-1.1.noarch.rpm (installed si─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 46.786046.786046.780, 1360%Downloading kernel-firmware-mellanox (download size 43.19 MiB) │ │~ze 5.41 MiB)│ │Downloading kernel-firmware-mellanox (download size 43.19 MiB) ─ 100%0%Installing kernel-firmware-mellanox-20210901-1.1.noarch.rpm (installed siz
│ │Installing kernel-firmware-mellanox-20210901-1.1.noarch.rpm (installed s─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 503.75 MiB│ 135│ 04:11openSUSE-20210927-0│ 503.75 MiB│ 135│ 04:102 03.7511, 1350%Downloading kernel-firmware-mediatek (download size 5.03 MiB) │ │~ize 43.03 MiB)│ │Downloading kernel-firmware-mediatek (download size 5.03 MiB) ─ 100%0%Installing kernel-firmware-mediatek-20210901-1.1.noarch.rpm (installed siz
│ │Installing kernel-firmware-mediatek-20210901-1.1.noarch.rpm (installed s─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 498.71408498.71408498.7108, 1340%Downloading kernel-firmware-media (download size 6.12 MiB)│ │~ize 5.04 MiB)│ │Downloading kernel-firmware-media (download size 6.12 MiB)─ 100%0%Installing kernel-firmware-media-20210901-1.1.noarch.rpm (installed size 6
│ │Installing kernel-firmware-media-20210901-1.1.noarch.rpm (installed size─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 2.55342.55342.554, 1330%Downloading kernel-firmware-marvell (download size 2.24 MiB)│ │~ 6.17 MiB)│ │Downloading kernel-firmware-marvell (download size 2.24 MiB) ─ 100%0%Installing kernel-firmware-marvell-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-marvell-20210901-1.1.noarch.rpm (installed si─ 5 11 7 22 7 32 7 42 47 52%8% 63% 8 73 8 84 9 95 100 0.29230.29230.293, 1320%Downloading kernel-firmware-liquidio (download size 15.85 MiB) │ │~ze 2.26 MiB)│ │Downloading kernel-firmware-liquidio (download size 15.85 MiB) ─ 100%0%Installing kernel-firmware-liquidio-20210901-1.1.noarch.rpm (installed siz
│ │Installing kernel-firmware-liquidio-20210901-1.1.noarch.rpm (installed s─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 74.4613:5574.4613:553 74.463:55, 1310%Downloading kernel-firmware-iwlwifi (download size 42.24 MiB) │ │~ize 15.83 MiB)│ │Downloading kernel-firmware-iwlwifi (download size 42.24 MiB) ─ 100%0%Installing kernel-firmware-iwlwifi-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-iwlwifi-20210901-1.1.noarch.rpm (installed si─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 432.46 MiB│ 130│ 03:26openSUSE-20210927-0│ 432.46 MiB│ 130│ 03:265 3226, 1300%Downloading kernel-firmware-intel (download size 2.47 MiB)│ │~ze 42.00 MiB)│ │Downloading kernel-firmware-intel (download size 2.47 MiB)─ 100%0%Installing kernel-firmware-intel-20210901-1.1.noarch.rpm (installed size 2
│ │Installing kernel-firmware-intel-20210901-1.1.noarch.rpm (installed size─ 5 10 5 20 5 30 5 40 45 516% 61% 6 71 6 81 6 91 6 100 29.9529529.9529529.955, 1290%Downloading kernel-firmware-i915 (download size 5.09 MiB)│ │~ 2.51 MiB)│ │Downloading kernel-firmware-i915 (download size 5.09 MiB)─ 100%0%Installing kernel-firmware-i915-20210901-1.1.noarch.rpm (installed size 5.
│ │Installing kernel-firmware-i915-20210901-1.1.noarch.rpm (installed size ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 4.88824.88824.882, 1280%Downloading kernel-firmware-dpaa2 (download size 3.88 MiB)│ │~5.07 MiB)│ │Downloading kernel-firmware-dpaa2 (download size 3.88 MiB)─ 100%0%Installing kernel-firmware-dpaa2-20210901-1.1.noarch.rpm (installed size 3
│ │Installing kernel-firmware-dpaa2-20210901-1.1.noarch.rpm (installed size─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 0.99700.99700.990, 1270%Downloading kernel-firmware-chelsio (download size 2.82 MiB)│ │~ 3.90 MiB)│ │Downloading kernel-firmware-chelsio (download size 2.82 MiB) ─ 100%0%Installing kernel-firmware-chelsio-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-chelsio-20210901-1.1.noarch.rpm (installed si─ 5 10 6 21 6 31 6 41 46 516% 61% 6 71 6 81 6 91 6 100 18.1661918.1661918.1619, 1260%Downloading kernel-firmware-brcm (download size 9.71 MiB)│ │~ze 2.83 MiB)│ │Downloading kernel-firmware-brcm (download size 9.71 MiB)─ 100%0%Installing kernel-firmware-brcm-20210901-1.1.noarch.rpm (installed size 9.
│ │Installing kernel-firmware-brcm-20210901-1.1.noarch.rpm (installed size ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 08.455408.4554608.454, 1250%Downloading kernel-firmware-bnx2 (download size 10.25 MiB)│ │~9.70 MiB)│ │Downloading kernel-firmware-bnx2 (download size 10.25 MiB)─ 100%0%Installing kernel-firmware-bnx2-20210901-1.1.noarch.rpm (installed size 10
│ │Installing kernel-firmware-bnx2-20210901-1.1.noarch.rpm (installed size ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 398.2040398.2040398.200, 1240%Downloading kernel-firmware-bluetooth (download size 5.18 MiB) │ │~10.25 MiB)│ │Downloading kernel-firmware-bluetooth (download size 5.18 MiB) ─ 100%0%Installing kernel-firmware-bluetooth-20210901-1.1.noarch.rpm (installed si
│ │Installing kernel-firmware-bluetooth-20210901-1.1.noarch.rpm (installed ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 3.023073.023077 3.0207, 1230%Downloading kernel-firmware-atheros (download size 1.76 MiB)│ │~size 5.18 MiB)│ │Downloading kernel-firmware-atheros (download size 1.76 MiB) ─ 100%0%Installing kernel-firmware-atheros-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-atheros-20210901-1.1.noarch.rpm (installed si─ 6 12 7 23 8 33 8 43 4853% 8% 64% 9 74 80 5 90 5 100 1.23261.23261.236, 1220%Downloading kernel-firmware-ath11k (download size 4.90 MiB)│ │~ze 1.78 MiB)│ │Downloading kernel-firmware-ath11k (download size 4.90 MiB) ─ 100%0%Installing kernel-firmware-ath11k-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-ath11k-20210901-1.1.noarch.rpm (installed siz─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 86.301486.301486.304, 1210%Downloading kernel-firmware-ath10k (download size 6.69 MiB)│ │~e 4.94 MiB)│ │Downloading kernel-firmware-ath10k (download size 6.69 MiB) ─ 100%0%Installing kernel-firmware-ath10k-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-ath10k-20210901-1.1.noarch.rpm (installed siz─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 379.45 MiB│ 120│ 02:57openSUSE-20210927-0│ 379.45 MiB│ 120│ 02:5679.452:57, 1200%Downloading kernel-firmware-amdgpu (download size 10.58 MiB) │ │~e 6.85 MiB)│ │Downloading kernel-firmware-amdgpu (download size 10.58 MiB) ─ 100%0%Installing kernel-firmware-amdgpu-20210901-1.1.noarch.rpm (installed size
│ │Installing kernel-firmware-amdgpu-20210901-1.1.noarch.rpm (installed siz─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 68.9619168.9619168.961, 1190%Downloading kernel-default (download size 107.48 MiB)│ │~e 10.49 MiB)│ │Downloading kernel-default (download size 107.48 MiB)─ 100%0%Installing kernel-default-5.14.6-1.5.aarch64.rpm (installed size 176.26 Mi
│ │Installing kernel-default-5.14.6-1.5.aarch64.rpm (installed size 176.26 ─ 5 10 5 20 5 30 4 8 43 45 503% 7% 62% 5 70 3 7 82 5 90 3 8 100 │Remaining│Packages│Time│ Remaining│Packages│ TimeTotal│ 192.70 MiB│ 118│ 01:24openSUSE-20210927-0│ 192.70 MiB│ 118│ 01:2475 192.701:24, 1180%Downloading yast2-qt-branding-openSUSE (download size 40.5 KiB) │ │~MiB)│ │Downloading yast2-qt-branding-openSUSE (download size 40.5 KiB) ─ 100%0%Installing yast2-qt-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (inst
│ │Installing yast2-qt-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (in─ 8 15 22 3 9 46 54% 9% 76 82 91 9 100 6276276270%Downloading gsettings-desktop-schemas (download size 55.8 KiB) │ │~stalled size 80.9 KiB)│ │Downloading gsettings-desktop-schemas (download size 55.8 KiB) ─ 100%0%Installing gsettings-desktop-schemas-40.0-1.2.aarch64.rpm (installed size
│ │Installing gsettings-desktop-schemas-40.0-1.2.aarch64.rpm (installed siz─ 5 13 21 30 5 40 4853% 9% 65 7 82 99 100 4464464460%Downloading tuned (download size 266.6 KiB)│ │~e 186.4 KiB)│ │Downloading tuned (download size 266.6 KiB)─ 100%0%Installing tuned-2.16.0-1.1.noarch.rpm (installed size 810.8 KiB)
│ │Installing tuned-2.16.0-1.1.noarch.rpm (installed size 810.8 KiB) ─ 5 10 5 20 5 30 8 43 4853% 8% 63% 8 73 8 83 8 93 8 100 1.65531.65531.653, 1150%Downloading python38-slip-dbus (download size 32 KiB)
│ │Downloading python38-slip-dbus (download size 32 KiB)─ 100%0%Installing python38-slip-dbus-0.6.5-6.8.noarch.rpm (installed size 85.6 Ki
│ │Installing python38-slip-dbus-0.6.5-6.8.noarch.rpm (installed size 85.6 ─ 8 13 20 9 38 47 53% 61% 75 86 93 8 100 5645645640%Downloading python38-notify2 (download size 18.5 KiB)│ │~KiB)│ │Downloading python38-notify2 (download size 18.5 KiB)─ 100%0%Installing python38-notify2-0.3.1-4.4.noarch.rpm (installed size 44.1 KiB)
│ │Installing python38-notify2-0.3.1-4.4.noarch.rpm (installed size 44.1 Ki─ 2959% 65 9100 2323230%Downloading sysconfig (download size 41.5 KiB)│ │~B)│ │Downloading sysconfig (download size 41.5 KiB)─ 100%0%Installing sysconfig-0.85.7-2.1.aarch64.rpm (installed size 129 KiB)
│ │Installing sysconfig-0.85.7-2.1.aarch64.rpm (installed size 129 KiB) ─ 19 45 69% 7 86 99 100 3923923920%Downloading cron (download size 36.5 KiB)
│ │Downloading cron (download size 36.5 KiB)─ 100%0%Installing cron-4.2-86.1.aarch64.rpm (installed size 181 B)
│ │Installing cron-4.2-86.1.aarch64.rpm (installed size 181 B) ─ 9 20 3 4 5162% 89100 1110%Downloading python38-pycups (download size 87.2 KiB)
│ │Downloading python38-pycups (download size 87.2 KiB)─ 100%0%Installing python38-pycups-2.0.1-1.3.aarch64.rpm (installed size 236.6 KiB
│ │Installing python38-pycups-2.0.1-1.3.aarch64.rpm (installed size 236.6 K─ 13 26 40 53% 67% 80 6 91 9 100 1601601600%Downloading libwbclient0 (download size 445.8 KiB)│ │~iB)│ │Downloading libwbclient0 (download size 445.8 KiB)─ 100%0%Installing libwbclient0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (instal
│ │Installing libwbclient0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (inst─ 4896%100 0090090090%Downloading libcupsimage2 (download size 159 KiB)│ │~alled size 66 KiB)│ │Downloading libcupsimage2 (download size 159 KiB)─ 100%0%Installing libcupsimage2-2.3.3op2-4.1.aarch64.rpm (installed size 65.9 KiB
│ │Installing libcupsimage2-2.3.3op2-4.1.aarch64.rpm (installed size 65.9 K─ 4897%100 0380380380%Downloading openssh (download size 78.3 KiB)│ │~iB)│ │Downloading openssh (download size 78.3 KiB)─ 100%0%Installing openssh-8.4p1-7.3.aarch64.rpm (installed size 0 B)
│ │Installing openssh-8.4p1-7.3.aarch64.rpm (installed size 0 B) ─ 100%7770%Downloading kernel-firmware-all (download size 130.9 KiB)
│ │Downloading kernel-firmware-all (download size 130.9 KiB)─ 100%0%Installing kernel-firmware-all-20210901-1.1.noarch.rpm (installed size 175
│ │Installing kernel-firmware-all-20210901-1.1.noarch.rpm (installed size 1─ 19 37 55% 73%929 100 0.8660.8660.8660%Downloading yast2-theme (download size 460.3 KiB)│ │~75.6 KiB)│ │Downloading yast2-theme (download size 460.3 KiB)─ 100%0%Installing yast2-theme-4.4.3-1.1.noarch.rpm (installed size 624.8 KiB)
│ │Installing yast2-theme-4.4.3-1.1.noarch.rpm (installed size 624.8 KiB) ─ 6 11 6 21 6 31 6 41 46 516% 61% 6 71 6 81 6 91 9 100 2552552550%Downloading glib-networking (download size 93.3 KiB)
│ │Downloading glib-networking (download size 93.3 KiB)─ 100%0%Installing glib-networking-2.68.1-1.2.aarch64.rpm (installed size 392.5 Ki
│ │Installing glib-networking-2.68.1-1.2.aarch64.rpm (installed size 392.5 ─ 8 16 25 33 41 4958% 66% 75 83 92 9 100 89.874289.874289.872, 1040%Downloading python3-firewall (download size 378.5 KiB)│ │~KiB)│ │Downloading python3-firewall (download size 378.5 KiB)─ 100%0%Installing python3-firewall-1.0.0-1.1.noarch.rpm (installed size 1.98 MiB)
│ │Installing python3-firewall-1.0.0-1.1.noarch.rpm (installed size 1.98 Mi─ 6 11 6 21 7 32 7 43 4853% 8% 63% 8 73 8 83 8 93 8 100 7.8937.8937.8930%Downloading apparmor-utils (download size 144.6 KiB)│ │~B)│ │Downloading apparmor-utils (download size 144.6 KiB)─ 100%0%Installing apparmor-utils-3.0.3-3.2.noarch.rpm (installed size 177 KiB)
│ │Installing apparmor-utils-3.0.3-3.2.noarch.rpm (installed size 177 KiB) ─ 8 13 21 36 42 4853% 9% 67 72 8 83 8 93 9 100 7227227220%Downloading sysconfig-netconfig (download size 261 KiB)
│ │Downloading sysconfig-netconfig (download size 261 KiB)─ 100%0%Installing sysconfig-netconfig-0.85.7-2.1.aarch64.rpm (installed size 170.
│ │Installing sysconfig-netconfig-0.85.7-2.1.aarch64.rpm (installed size 17─ 8 14 21 7 36 47 65% 8497 100 55115511551, 1010%Downloading cronie (download size 120.6 KiB)│ │~0.4 KiB)│ │Downloading cronie (download size 120.6 KiB)─ 100%0%Installing cronie-1.5.7-86.1.aarch64.rpm (installed size 340.4 KiB)
│ │Installing cronie-1.5.7-86.1.aarch64.rpm (installed size 340.4 KiB) ─ 9 1 2 38 5160% 7 8 8 95 100 2202202200%Downloading python3-cupshelpers (download size 93.7 KiB)
│ │Downloading python3-cupshelpers (download size 93.7 KiB)─ 100%0%Installing python3-cupshelpers-1.5.15-1.2.noarch.rpm (installed size 125.4
│ │Installing python3-cupshelpers-1.5.15-1.2.noarch.rpm (installed size 125─ 835 5075%84 99 100 09 9909 990999 packages) 0%Downloading libtevent-util0 (download size 428.6 KiB)│ │~.4 KiB)│ │Downloading libtevent-util0 (download size 428.6 KiB)─ 100%0%Installing libtevent-util0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (ins
│ │Installing libtevent-util0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (i─ 4896%100 3838380%Downloading cups-client (download size 351.4 KiB)│ │~nstalled size 66 KiB)│ │Downloading cups-client (download size 351.4 KiB)─ 100%0%Installing cups-client-2.3.3op2-4.1.aarch64.rpm (installed size 1.18 MiB)
│ │Installing cups-client-2.3.3op2-4.1.aarch64.rpm (installed size 1.18 MiB─ 5 10 5 21 6 32 7 42 4853% 9% 64 70 5 81 6 91 7 100 5.8575.8575.8570%Downloading plymouth-scripts (download size 60.6 KiB)│ │~)│ │Downloading plymouth-scripts (download size 60.6 KiB)─ 100%0%Installing plymouth-scripts-0.9.5~git20210406.e554475-1.1.noarch.rpm (inst
│ │Installing plymouth-scripts-0.9.5~git20210406.e554475-1.1.noarch.rpm (in─ 98%100 4646460%Downloading patterns-base-base (download size 127.7 KiB)│ │~stalled size 6.7 KiB)│ │Downloading patterns-base-base (download size 127.7 KiB)─ 100%0%Installing patterns-base-base-20200505-23.1.aarch64.rpm (installed size 50
│ │Installing patterns-base-base-20200505-23.1.aarch64.rpm (installed size ─ 3 73%1005550%Downloading parallel-printer-support (download size 9.3 KiB)│ │~50 B)│ │Downloading parallel-printer-support (download size 9.3 KiB) ─ 100%0%Installing parallel-printer-support-1.00-14.9.noarch.rpm (installed size 4
│ │Installing parallel-printer-support-1.00-14.9.noarch.rpm (installed size─ 1 45 58% 90%10 4440%Downloading os-prober (download size 50 KiB)│ │~ 494 B)│ │Downloading os-prober (download size 50 KiB)─ 100%0%Installing os-prober-1.79-1.1.aarch64.rpm (installed size 195.6 KiB)
│ │Installing os-prober-1.79-1.1.aarch64.rpm (installed size 195.6 KiB) ─ 5 10 534 506% 61% 7 72 7 93 9 100 6536536530%Downloading mdadm (download size 480.1 KiB)
│ │Downloading mdadm (download size 480.1 KiB)─ 100%0%Installing mdadm-4.1-14.1.aarch64.rpm (installed size 1.18 MiB)
│ │Installing mdadm-4.1-14.1.aarch64.rpm (installed size 1.18 MiB) ─ 5 10 5 21 6 31 6 42 47 52%7% 63% 8 73 9 86 91 6 100 4.47204.47204.470, 920%Downloading libmpath0 (download size 322.6 KiB)
│ │Downloading libmpath0 (download size 322.6 KiB)─ 100%0%Installing libmpath0-0.8.7+14+suse.5a09bfa-2.1.aarch64.rpm (installed size
│ │Installing libmpath0-0.8.7+14+suse.5a09bfa-2.1.aarch64.rpm (installed si─ 5 10 6 21 6 32 8 43 4854% 60% 6 72 8 84 90 5 100 2.311192.311192.3119, 910%Downloading kmod-bash-completion (download size 27 KiB)│ │~ze 2.16 MiB)│ │Downloading kmod-bash-completion (download size 27 KiB)─ 100%0%Installing kmod-bash-completion-29-5.1.noarch.rpm (installed size 3.2 KiB)
│ │Installing kmod-bash-completion-29-5.1.noarch.rpm (installed size 3.2 Ki─ 796%100 0000%Downloading kexec-tools (download size 117.4 KiB)│ │~B)│ │Downloading kexec-tools (download size 117.4 KiB)─ 100%0%Installing kexec-tools-2.0.22-1.2.aarch64.rpm (installed size 297 KiB)
│ │Installing kexec-tools-2.0.22-1.2.aarch64.rpm (installed size 297 KiB) ─ 1 21 32 4 56% 67% 75 8 92 8 100 0289028902890%Downloading yast2 (download size 534.4 KiB)
│ │Downloading yast2 (download size 534.4 KiB)─ 100%0%Installing yast2-4.4.20-1.1.aarch64.rpm (installed size 2.53 MiB)
│ │Installing yast2-4.4.20-1.1.aarch64.rpm (installed size 2.53 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 79.498879.498879.498, 880%Downloading firewalld (download size 197.5 KiB)
│ │Downloading firewalld (download size 197.5 KiB)─ 100%0%Installing firewalld-1.0.0-1.1.noarch.rpm (installed size 453.5 KiB)
│ │Installing firewalld-1.0.0-1.1.noarch.rpm (installed size 453.5 KiB) ─ 7 13 20 6 35 41 4853% 8% 63% 8 73 8 83 8 93 8 100 0570570570%Downloading udev-configure-printer (download size 83 KiB)
│ │Downloading udev-configure-printer (download size 83 KiB)─ 100%0%Installing udev-configure-printer-1.5.15-1.2.aarch64.rpm (installed size 7
│ │Installing udev-configure-printer-1.5.15-1.2.aarch64.rpm (installed size─ 1354% 95%100 8.9768.9768.9760%Downloading libndr1 (download size 460.3 KiB)│ │~ 77 KiB)│ │Downloading libndr1 (download size 460.3 KiB)─ 100%0%Installing libndr1-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installed s
│ │Installing libndr1-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installed─ 244973%98100 8558558550%Downloading cups (download size 4.81 MiB)│ │~ size 130.1 KiB)│ │Downloading cups (download size 4.81 MiB)─ 100%0%Installing cups-2.3.3op2-4.1.aarch64.rpm (installed size 8.96 MiB)
│ │Installing cups-2.3.3op2-4.1.aarch64.rpm (installed size 8.96 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 69.884469.88446 69.884, 840%Downloading plymouth-theme-spinner (download size 181.8 KiB)
│ │Downloading plymouth-theme-spinner (download size 181.8 KiB) ─ 100%0%Installing plymouth-theme-spinner-0.9.5~git20210406.e554475-1.1.noarch.rpm
│ │Installing plymouth-theme-spinner-0.9.5~git20210406.e554475-1.1.noarch.r─ 5 10 5 20 5 30 5 4 63% 8 73 8 83 8 93 8 100 7537537530%Downloading grub2 (download size 3.29 MiB)│ │~pm (installed size 139.1 KiB)│ │Downloading grub2 (download size 3.29 MiB)─ 100%0%Installing grub2-2.06-7.1.aarch64.rpm (installed size 24.55 MiB)
│ │Installing grub2-2.06-7.1.aarch64.rpm (installed size 24.55 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 45.2020345.20203745.2003, 820%Downloading multipath-tools (download size 147.6 KiB)
│ │Downloading multipath-tools (download size 147.6 KiB)─ 100%0%Installing multipath-tools-0.8.7+14+suse.5a09bfa-2.1.aarch64.rpm (installe
│ │Installing multipath-tools-0.8.7+14+suse.5a09bfa-2.1.aarch64.rpm (instal─ 11 9 28 36 45 53% 62% 70 8 86 93 8 100 4.8214.8214.8210%Downloading yast2-vpn (download size 31 KiB)│ │~led size 383.6 KiB)│ │Downloading yast2-vpn (download size 31 KiB)─ 100%0%Installing yast2-vpn-4.4.0-1.1.noarch.rpm (installed size 110 KiB)
│ │Installing yast2-vpn-4.4.0-1.1.noarch.rpm (installed size 110 KiB) ─ 9 1738 56% 63% 9 894 9 100 7107107100%Downloading yast2-sysconfig (download size 44.1 KiB)
│ │Downloading yast2-sysconfig (download size 44.1 KiB)─ 100%0%Installing yast2-sysconfig-4.4.0-1.1.noarch.rpm (installed size 134.4 KiB)
│ │Installing yast2-sysconfig-4.4.0-1.1.noarch.rpm (installed size 134.4 Ki─ 8 13 21 44 5077%82 99 100 │Remaining│Packages│Time │ Remaining│Packages│ TimeTotal│ 144.58 MiB│ 79│ 01:01openSUSE-20210927-0│ 144.58 MiB│79│ 01:01581, 790%Downloading yast2-snapper (download size 31.2 KiB)│ │~B)│ │Downloading yast2-snapper (download size 31.2 KiB)─ 100%0%Installing yast2-snapper-4.4.1-1.1.aarch64.rpm (installed size 89.5 KiB)
│ │Installing yast2-snapper-4.4.1-1.1.aarch64.rpm (installed size 89.5 KiB)─ 37 42 4967% 74 9 98100 4984984980%Downloading yast2-slp (download size 44.3 KiB)
│ │Downloading yast2-slp (download size 44.3 KiB)─ 100%0%Installing yast2-slp-4.4.0-1.2.aarch64.rpm (installed size 106.5 KiB)
│ │Installing yast2-slp-4.4.0-1.2.aarch64.rpm (installed size 106.5 KiB) ─ 3 60% 9 75 80 99100 3737370%Downloading yast2-proxy (download size 32.4 KiB)
│ │Downloading yast2-proxy (download size 32.4 KiB)─ 100%0%Installing yast2-proxy-4.4.1-1.1.noarch.rpm (installed size 71.9 KiB)
│ │Installing yast2-proxy-4.4.1-1.1.noarch.rpm (installed size 71.9 KiB) ─ 31 6 45 65% 70 5 98100 2626260%Downloading yast2-pam (download size 28.4 KiB)
│ │Downloading yast2-pam (download size 28.4 KiB)─ 100%0%Installing yast2-pam-4.4.0-1.1.noarch.rpm (installed size 64.6 KiB)
│ │Installing yast2-pam-4.4.0-1.1.noarch.rpm (installed size 64.6 KiB) ─ 31 43 54% 9% 66 71 99100 2652652650%Downloading yast2-journal (download size 28.8 KiB)
│ │Downloading yast2-journal (download size 28.8 KiB)─ 100%0%Installing yast2-journal-4.4.0-1.1.noarch.rpm (installed size 59 KiB)
│ │Installing yast2-journal-4.4.0-1.1.noarch.rpm (installed size 59 KiB) ─ 6 14 21 7 36 4855% 60% 8996 100 0404040%Downloading yast2-firewall (download size 51 KiB)
│ │Downloading yast2-firewall (download size 51 KiB)─ 100%0%Installing yast2-firewall-4.4.1-1.1.noarch.rpm (installed size 136.7 KiB)
│ │Installing yast2-firewall-4.4.1-1.1.noarch.rpm (installed size 136.7 KiB─ 5 11 7 22 30 5 40 46 52%8% 65% 70 7 82 99 100 07300730070, 730%Downloading yast2-auth-server (download size 30.3 KiB)│ │~)│ │Downloading yast2-auth-server (download size 30.3 KiB)─ 100%0%Installing yast2-auth-server-4.4.0-1.1.noarch.rpm (installed size 73.7 KiB
│ │Installing yast2-auth-server-4.4.0-1.1.noarch.rpm (installed size 73.7 K─ 8 15 23 31 44 5060% 7 96100 3.9923.9923.9920%Downloading yast2-apparmor (download size 31 KiB)│ │~iB)│ │Downloading yast2-apparmor (download size 31 KiB)─ 100%0%Installing yast2-apparmor-4.4.1-1.1.noarch.rpm (installed size 61.2 KiB)
│ │Installing yast2-apparmor-4.4.1-1.1.noarch.rpm (installed size 61.2 KiB)─ 7 12 25 41 46 5168% 9100 3131310%Downloading firewalld-bash-completion (download size 52.6 KiB)
│ │Downloading firewalld-bash-completion (download size 52.6 KiB) ─ 100%0%Installing firewalld-bash-completion-1.0.0-1.1.noarch.rpm (installed size
│ │Installing firewalld-bash-completion-1.0.0-1.1.noarch.rpm (installed siz─ 98%100 2020200%Downloading libdcerpc-binding0 (download size 470 KiB)│ │~e 10.2 KiB)│ │Downloading libdcerpc-binding0 (download size 470 KiB)─ 100%0%Installing libdcerpc-binding0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (
│ │Installing libdcerpc-binding0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm─ 16 33 4965% 82 98 100 7469746974690%Downloading cups-filters (download size 874.1 KiB)│ │~ (installed size 194.1 KiB)│ │Downloading cups-filters (download size 874.1 KiB)─ 100%0%Installing cups-filters-1.28.8-2.1.aarch64.rpm (installed size 3.53 MiB)
│ │Installing cups-filters-1.28.8-2.1.aarch64.rpm (installed size 3.53 MiB)─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 0.2080:590.2080:590.200:59, 680%Downloading plymouth-theme-bgrt (download size 59.5 KiB)
│ │Downloading plymouth-theme-bgrt (download size 59.5 KiB)─ 100%0%Installing plymouth-theme-bgrt-0.9.5~git20210406.e554475-1.1.noarch.rpm (i
│ │Installing plymouth-theme-bgrt-0.9.5~git20210406.e554475-1.1.noarch.rpm ─ 793%100 7770%Downloading grub2-systemd-sleep-plugin (download size 44.8 KiB) │ │~(installed size 1.6 KiB)│ │Downloading grub2-systemd-sleep-plugin (download size 44.8 KiB) ─ 100%0%Installing grub2-systemd-sleep-plugin-2.06-7.1.noarch.rpm (installed size
│ │Installing grub2-systemd-sleep-plugin-2.06-7.1.noarch.rpm (installed siz─ 98%100 1961961960%Downloading grub2-snapper-plugin (download size 45 KiB)│ │~e 7.6 KiB)│ │Downloading grub2-snapper-plugin (download size 45 KiB)─ 100%0%Installing grub2-snapper-plugin-2.06-7.1.noarch.rpm (installed size 8.4 Ki
│ │Installing grub2-snapper-plugin-2.06-7.1.noarch.rpm (installed size 8.4 ─ 1198%100 8585850%Downloading grub2-branding-openSUSE (download size 46.5 KiB)│ │~KiB)│ │Downloading grub2-branding-openSUSE (download size 46.5 KiB) ─ 100%0%Installing grub2-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (install
│ │Installing grub2-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (insta─ 41 53% 63% 7 8 87 95 100 4444440%Downloading grub2-arm64-efi (download size 977.4 KiB)│ │~lled size 45.6 KiB)│ │Downloading grub2-arm64-efi (download size 977.4 KiB)─ 100%0%Installing grub2-arm64-efi-2.06-7.1.noarch.rpm (installed size 5.14 MiB)
│ │Installing grub2-arm64-efi-2.06-7.1.noarch.rpm (installed size 5.14 MiB)─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 35.003735.003735.007, 630%Downloading libstorage-ng1 (download size 1.02 MiB)
│ │Downloading libstorage-ng1 (download size 1.02 MiB)─ 100%0%Installing libstorage-ng1-4.4.37-1.1.aarch64.rpm (installed size 3.04 MiB)
│ │Installing libstorage-ng1-4.4.37-1.1.aarch64.rpm (installed size 3.04 Mi─ 5 10 5 20 5 30 6 41 46 516% 61% 6 72 7 82 7 92 7 100 1.96251.96251.965, 620%Downloading yast2-auth-client (download size 60.4 KiB)│ │~B)│ │Downloading yast2-auth-client (download size 60.4 KiB)─ 100%0%Installing yast2-auth-client-4.4.1-1.1.noarch.rpm (installed size 277.7 Ki
│ │Installing yast2-auth-client-4.4.1-1.1.noarch.rpm (installed size 277.7 ─ 13 8 23 8 3 44 53% 8% 69% 80 5 90 9 100 6916916910%Downloading yast2-tftp-server (download size 27.6 KiB)│ │~KiB)│ │Downloading yast2-tftp-server (download size 27.6 KiB)─ 100%0%Installing yast2-tftp-server-4.4.0-1.1.noarch.rpm (installed size 49.4 KiB
│ │Installing yast2-tftp-server-4.4.0-1.1.noarch.rpm (installed size 49.4 K─ 8 14 28 33 52%7% 64% 97100 4040400%Downloading yast2-services-manager (download size 48.7 KiB)│ │~iB)│ │Downloading yast2-services-manager (download size 48.7 KiB) ─ 100%0%Installing yast2-services-manager-4.4.1-1.1.noarch.rpm (installed size 136
│ │Installing yast2-services-manager-4.4.1-1.1.noarch.rpm (installed size 1─ 1 9 34 9 44 53% 8% 76%81 6 99 100 5159515951590%Downloading patterns-base-apparmor (download size 127.3 KiB)│ │~36.3 KiB)│ │Downloading patterns-base-apparmor (download size 127.3 KiB) ─ 100%0%Installing patterns-base-apparmor-20200505-23.1.aarch64.rpm (installed siz
│ │Installing patterns-base-apparmor-20200505-23.1.aarch64.rpm (installed s─ 2973%1008880%Downloading samba-libs (download size 3.88 MiB)│ │~ize 54 B)│ │Downloading samba-libs (download size 3.88 MiB)─ 100%0%Installing samba-libs-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installe
│ │Installing samba-libs-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (instal─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 13.5474813.547488 13.5448, 570%Downloading ghostscript (download size 18.45 MiB)│ │~led size 17.97 MiB)│ │Downloading ghostscript (download size 18.45 MiB)─ 100%0%Installing ghostscript-9.54.0-2.1.aarch64.rpm (installed size 50.57 MiB)
│ │Installing ghostscript-9.54.0-2.1.aarch64.rpm (installed size 50.57 MiB)─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 62.98626 62.9862681 62.98 MiB / 00:26, 56 packages) 0%Downloading plymouth-branding-openSUSE (download size 23.8 KiB)
│ │Downloading plymouth-branding-openSUSE (download size 23.8 KiB) ─ 100%0%Installing plymouth-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (inst
│ │Installing plymouth-branding-openSUSE-84.87.20200106-4.25.noarch.rpm (in─ 37 76%1005550%Downloading shim (download size 386.7 KiB)│ │~stalled size 100 B)│ │Downloading shim (download size 386.7 KiB)─ 100%0%Installing shim-15.4-7.1.aarch64.rpm (installed size 1.68 MiB)
│ │Installing shim-15.4-7.1.aarch64.rpm (installed size 1.68 MiB) ─ 6 12 7 23 8 34 40 45 517% 62% 8 73 9 84 90 6 100 1.30451.30451.305, 540%Downloading libstorage-ng-ruby (download size 1.03 MiB)
│ │Downloading libstorage-ng-ruby (download size 1.03 MiB)─ 100%0%Installing libstorage-ng-ruby-4.4.37-1.1.aarch64.rpm (installed size 5.12
│ │Installing libstorage-ng-ruby-4.4.37-1.1.aarch64.rpm (installed size 5.1─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 56.183356.183356.183, 530%Downloading libsamba-util0 (download size 622.9 KiB)│ │~2 MiB)│ │Downloading libsamba-util0 (download size 622.9 KiB)─ 100%0%Installing libsamba-util0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (inst
│ │Installing libsamba-util0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (in─ 6 12 8 24 31 7 43 4956% 62% 8 74 80 7 93 9 100 5.625.625.620%Downloading ghostscript-x11 (download size 97.1 KiB)│ │~stalled size 514.3 KiB)│ │Downloading ghostscript-x11 (download size 97.1 KiB)─ 100%0%Installing ghostscript-x11-9.54.0-2.1.aarch64.rpm (installed size 131.7 Ki
│ │Installing ghostscript-x11-9.54.0-2.1.aarch64.rpm (installed size 131.7 ─ 244872%97100 5515515510%Downloading plymouth (download size 139.1 KiB)│ │~KiB)│ │Downloading plymouth (download size 139.1 KiB)─ 100%0%Installing plymouth-0.9.5~git20210406.e554475-1.1.aarch64.rpm (installed s
│ │Installing plymouth-0.9.5~git20210406.e554475-1.1.aarch64.rpm (installed─ 5 11 9 24 30 6 42 47 53% 9% 65 70 6 82 7 93 8 100 4.9904.9904.9900%Downloading yast2-packager (download size 218.7 KiB)│ │~ size 567 KiB)│ │Downloading yast2-packager (download size 218.7 KiB)─ 100%0%Installing yast2-packager-4.4.6-1.1.aarch64.rpm (installed size 877.8 KiB)
│ │Installing yast2-packager-4.4.6-1.1.aarch64.rpm (installed size 877.8 Ki─ 5 11 6 24 30 5 40 45 505% 62% 9 75 81 7 95 100 1449214492142, 490%Downloading libsamba-hostconfig0 (download size 474 KiB)│ │~B)│ │Downloading libsamba-hostconfig0 (download size 474 KiB)─ 100%0%Installing libsamba-hostconfig0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm
│ │Installing libsamba-hostconfig0-4.14.6+git.182.2205d5224e3-1.1.aarch64.r─ 14 29 43 57% 72%86 99 100 3.9283.9283.9280%Downloading groff-full (download size 1.57 MiB)│ │~pm (installed size 221.3 KiB)│ │Downloading groff-full (download size 1.57 MiB)─ 100%0%Installing groff-full-1.22.4-5.4.aarch64.rpm (installed size 6.23 MiB)
│ │Installing groff-full-1.22.4-5.4.aarch64.rpm (installed size 6.23 MiB) ─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 47.697047.697047.690, 470%Downloading plymouth-lang (download size 68.8 KiB)
│ │Downloading plymouth-lang (download size 68.8 KiB)─ 100%0%Installing plymouth-lang-0.9.5~git20210406.e554475-1.1.noarch.rpm (install
│ │Installing plymouth-lang-0.9.5~git20210406.e554475-1.1.noarch.rpm (insta─ 7 14 21 8 36 43 505% 62% 70 8 85 93 9 100 6666660%Downloading yast2-storage-ng (download size 525 KiB)│ │~lled size 24.5 KiB)│ │Downloading yast2-storage-ng (download size 525 KiB)─ 100%0%Installing yast2-storage-ng-4.4.7-1.1.aarch64.rpm (installed size 2.54 MiB
│ │Installing yast2-storage-ng-4.4.7-1.1.aarch64.rpm (installed size 2.54 M─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 5.135195.135195.1319, 450%Downloading libsamba-credentials1 (download size 455.2 KiB)│ │~iB)│ │Downloading libsamba-credentials1 (download size 455.2 KiB) ─ 100%0%Installing libsamba-credentials1-4.14.6+git.182.2205d5224e3-1.1.aarch64.rp
│ │Installing libsamba-credentials1-4.14.6+git.182.2205d5224e3-1.1.aarch64.─ 244973%98100 0040040040%Downloading gxditview (download size 70.9 KiB)│ │~rpm (installed size 130 KiB)│ │Downloading gxditview (download size 70.9 KiB)─ 100%0%Installing gxditview-1.22.4-5.4.aarch64.rpm (installed size 202.6 KiB)
│ │Installing gxditview-1.22.4-5.4.aarch64.rpm (installed size 202.6 KiB) ─ 15 31 47 62% 78 87 9 100 4.8384.8384.88, 430%Downloading plymouth-dracut (download size 64.3 KiB)
│ │Downloading plymouth-dracut (download size 64.3 KiB)─ 100%0%Installing plymouth-dracut-0.9.5~git20210406.e554475-1.1.aarch64.rpm (inst
│ │Installing plymouth-dracut-0.9.5~git20210406.e554475-1.1.aarch64.rpm (in─ 599%100 │Remaining│Packages│Time │ Remaining│Packages│ TimeTotal│ 44.78 MiB│ 42│ 00:17openSUSE-20210927-0│ 44.78 MiB│42│ 00:16787, 420%Downloading yast2-online-update (download size 35.1 KiB)│ │~stalled size 18 KiB)│ │Downloading yast2-online-update (download size 35.1 KiB)─ 100%0%Installing yast2-online-update-4.4.3-1.1.noarch.rpm (installed size 106.6
│ │Installing yast2-online-update-4.4.3-1.1.noarch.rpm (installed size 106.─ 15 26 31 42 64% 79 9100 6161666, 410%Downloading yast2-nfs-client (download size 44.2 KiB)│ │~6 KiB)│ │Downloading yast2-nfs-client (download size 44.2 KiB)─ 100%0%Installing yast2-nfs-client-4.4.0-1.1.noarch.rpm (installed size 110 KiB)
│ │Installing yast2-nfs-client-4.4.0-1.1.noarch.rpm (installed size 110 KiB─ 11 23 45 5069% 78 83 98 100 5705705700%Downloading yast2-network (download size 258 KiB)│ │~)│ │Downloading yast2-network (download size 258 KiB)─ 100%0%Installing yast2-network-4.4.25-1.1.noarch.rpm (installed size 1.06 MiB)
│ │Installing yast2-network-4.4.25-1.1.noarch.rpm (installed size 1.06 MiB)─ 5 11 6 21 6 31 6 41 46 516% 61% 6 71 6 81 6 91 6 100 3.51393.51393.51390%Downloading yast2-metapackage-handler (download size 36.2 KiB)
│ │Downloading yast2-metapackage-handler (download size 36.2 KiB) ─ 100%0%Installing yast2-metapackage-handler-4.4.1-1.1.noarch.rpm (installed size
│ │Installing yast2-metapackage-handler-4.4.1-1.1.noarch.rpm (installed siz─ 6 22 7 4 60% 9 74 9 84 99 100 4084084080%Downloading yast2-iscsi-client (download size 48.5 KiB)│ │~e 118.4 KiB)│ │Downloading yast2-iscsi-client (download size 48.5 KiB)─ 100%0%Installing yast2-iscsi-client-4.4.2-1.1.noarch.rpm (installed size 171.1 K
│ │Installing yast2-iscsi-client-4.4.2-1.1.noarch.rpm (installed size 171.1─ 6 11 2 6 43 52%70% 83 8 99 100 2372372370%Downloading yast2-country (download size 81 KiB)│ │~ KiB)│ │Downloading yast2-country (download size 81 KiB)─ 100%0%Installing yast2-country-4.4.6-1.1.aarch64.rpm (installed size 259 KiB)
│ │Installing yast2-country-4.4.6-1.1.aarch64.rpm (installed size 259 KiB) ─ 6 1 21 3 43 4957% 63% 8 79 84 9 98 100 2.9862.9862.9860%Downloading yast2-bootloader (download size 93 KiB)
│ │Downloading yast2-bootloader (download size 93 KiB)─ 100%0%Installing yast2-bootloader-4.4.7-1.1.aarch64.rpm (installed size 257 KiB)
│ │Installing yast2-bootloader-4.4.7-1.1.aarch64.rpm (installed size 257 Ki─ 6 11 7 22 38 43 4853% 8% 64% 9 74 81 7 92 9 100 7357357350%Downloading libndr-standard0 (download size 1.19 MiB)│ │~B)│ │Downloading libndr-standard0 (download size 1.19 MiB)─ 100%0%Installing libndr-standard0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (in
│ │Installing libndr-standard0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 39.104439.104439.104, 340%Downloading yast2-online-update-frontend (download size 39.3 KiB) │ │~installed size 3.63 MiB)│ │Downloading yast2-online-update-frontend (download size 39.3 KiB) ─ 100%0%Installing yast2-online-update-frontend-4.4.3-1.1.noarch.rpm (installed si
│ │Installing yast2-online-update-frontend-4.4.3-1.1.noarch.rpm (installed ─ 6 41 47 94%100 3330%Downloading yast2-ntp-client (download size 59.5 KiB)│ │~size 1.6 KiB)│ │Downloading yast2-ntp-client (download size 59.5 KiB)─ 100%0%Installing yast2-ntp-client-4.4.1-1.1.noarch.rpm (installed size 164.7 KiB
│ │Installing yast2-ntp-client-4.4.1-1.1.noarch.rpm (installed size 164.7 K─ 1231 44 516% 61% 7 85 99 100 8.9428.9428.9420%Downloading yast2-nis-client (download size 59.3 KiB)│ │~iB)│ │Downloading yast2-nis-client (download size 59.3 KiB)─ 100%0%Installing yast2-nis-client-4.4.1-1.3.aarch64.rpm (installed size 191.9 Ki
│ │Installing yast2-nis-client-4.4.1-1.3.aarch64.rpm (installed size 191.9 ─ 21 37 43 61% 86 99 100 7517517510%Downloading yast2-ldap (download size 106.6 KiB)│ │~KiB)│ │Downloading yast2-ldap (download size 106.6 KiB)─ 100%0%Installing yast2-ldap-4.4.1-1.2.aarch64.rpm (installed size 379.6 KiB)
│ │Installing yast2-ldap-4.4.1-1.2.aarch64.rpm (installed size 379.6 KiB) ─ 8 17 25 33 42 507% 66% 74 82 8 95 100 3803803800%Downloading yast2-vm (download size 32.5 KiB)
│ │Downloading yast2-vm (download size 32.5 KiB)─ 100%0%Installing yast2-vm-4.4.1-1.1.aarch64.rpm (installed size 79.4 KiB)
│ │Installing yast2-vm-4.4.1-1.1.aarch64.rpm (installed size 79.4 KiB) ─ 8 21 8 35 46 67% 73 97100 0290290290%Downloading yast2-tune (download size 45.2 KiB)
│ │Downloading yast2-tune (download size 45.2 KiB)─ 100%0%Installing yast2-tune-4.4.1-1.1.aarch64.rpm (installed size 143.3 KiB)
│ │Installing yast2-tune-4.4.1-1.1.aarch64.rpm (installed size 143.3 KiB) ─ 6 13 264855% 62% 77 82 98 100 1681681680%Downloading yast2-security (download size 58.3 KiB)
│ │Downloading yast2-security (download size 58.3 KiB)─ 100%0%Installing yast2-security-4.4.1-1.1.noarch.rpm (installed size 187.4 KiB)
│ │Installing yast2-security-4.4.1-1.1.noarch.rpm (installed size 187.4 KiB─ 6 11 28 40 47 54% 66% 83 8 99 100 7.9877.9877.9870%Downloading libsmbconf0 (download size 628 KiB)│ │~)│ │Downloading libsmbconf0 (download size 628 KiB)─ 100%0%Installing libsmbconf0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (install
│ │Installing libsmbconf0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (insta─ 9 14 9 24 9 34 9 44 4954% 9% 64 9 74 9 84 9 94 9 100 3563563560%Downloading patterns-yast-yast2_basis (download size 11.5 KiB) │ │~lled size 643.5 KiB)│ │Downloading patterns-yast-yast2_basis (download size 11.5 KiB) ─ 100%0%Installing patterns-yast-yast2_basis-20210809-1.1.aarch64.rpm (installed s
│ │Installing patterns-yast-yast2_basis-20210809-1.1.aarch64.rpm (installed─ 2973%1005550%Downloading yast2-users (download size 217.5 KiB)│ │~ size 57 B)│ │Downloading yast2-users (download size 217.5 KiB)─ 100%0%Installing yast2-users-4.4.6-1.1.aarch64.rpm (installed size 1.14 MiB)
│ │Installing yast2-users-4.4.6-1.1.aarch64.rpm (installed size 1.14 MiB) ─ 6 11 7 22 7 32 7 42 47 52%9% 64 70 5 82 7 93 8 100 6.21436.21436.213, 240%Downloading libsamdb0 (download size 458.9 KiB)
│ │Downloading libsamdb0 (download size 458.9 KiB)─ 100%0%Installing libsamdb0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installed
│ │Installing libsamdb0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (install─ 244873%97100 0830830830%Downloading yast2-sudo (download size 36.6 KiB)│ │~ed size 130.9 KiB)│ │Downloading yast2-sudo (download size 36.6 KiB)─ 100%0%Installing yast2-sudo-4.4.0-1.1.noarch.rpm (installed size 126 KiB)
│ │Installing yast2-sudo-4.4.0-1.1.noarch.rpm (installed size 126 KiB) ─ 6 12 20 9462% 8199100 5.9625.9625.9620%Downloading yast2-mail (download size 64.9 KiB)
│ │Downloading yast2-mail (download size 64.9 KiB)─ 100%0%Installing yast2-mail-4.4.0-1.1.noarch.rpm (installed size 222.8 KiB)
│ │Installing yast2-mail-4.4.0-1.1.noarch.rpm (installed size 222.8 KiB) ─ 8 15 20 6 40 46 58% 76%81 6 91 9 100 7417417410%Downloading yast2-installation (download size 244.5 KiB)
│ │Downloading yast2-installation (download size 244.5 KiB)─ 100%0%Installing yast2-installation-4.4.18-1.1.noarch.rpm (installed size 854.5
│ │Installing yast2-installation-4.4.18-1.1.noarch.rpm (installed size 854.─ 5 10 5 20 5 30 5 41 46 516% 61% 8 73 8 83 9 94 9 100 4.9104.9104.9100%Downloading libsamba-passdb0 (download size 523.7 KiB)│ │~5 KiB)│ │Downloading libsamba-passdb0 (download size 523.7 KiB)─ 100%0%Installing libsamba-passdb0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (in
│ │Installing libsamba-passdb0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (─ 1 9 2 3 459% 6 7 8 9 100 5919591959190%Downloading yast2-update (download size 51.7 KiB)│ │~installed size 322.7 KiB)│ │Downloading yast2-update (download size 51.7 KiB)─ 100%0%Installing yast2-update-4.4.3-1.1.aarch64.rpm (installed size 173 KiB)
│ │Installing yast2-update-4.4.3-1.1.aarch64.rpm (installed size 173 KiB) ─ 6 14 27 3 58% 76%97100 4284284280%Downloading libndr-nbt0 (download size 474 KiB)
│ │Downloading libndr-nbt0 (download size 474 KiB)─ 100%0%Installing libndr-nbt0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (install
│ │Installing libndr-nbt0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (insta─ 16 33 4965% 82 98 100 23722372232, 170%Downloading autoyast2-installation (download size 263.7 KiB)│ │~lled size 194.1 KiB)│ │Downloading autoyast2-installation (download size 263.7 KiB) ─ 100%0%Installing autoyast2-installation-4.4.16-1.1.noarch.rpm (installed size 66
│ │Installing autoyast2-installation-4.4.16-1.1.noarch.rpm (installed size ─ 5 10 5 20 6 31 7 42 47 52%7% 62% 8 73 8 83 8 93 9 100 3.5963.5963.5960%Downloading libdcerpc0 (download size 487.2 KiB)│ │~661.3 KiB)│ │Downloading libdcerpc0 (download size 487.2 KiB)─ 100%0%Installing libdcerpc0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installe
│ │Installing libdcerpc0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (instal─ 12 24 37 4962% 74 86 99 100 3353353350%Downloading yast2-add-on (download size 50.2 KiB)│ │~led size 258.1 KiB)│ │Downloading yast2-add-on (download size 50.2 KiB)─ 100%0%Installing yast2-add-on-4.4.3-1.1.noarch.rpm (installed size 129 KiB)
│ │Installing yast2-add-on-4.4.3-1.1.noarch.rpm (installed size 129 KiB) ─ 6 1438 58% 6 73 9 84 98 100 2142142140%Downloading libndr-krb5pac0 (download size 440 KiB)
│ │Downloading libndr-krb5pac0 (download size 440 KiB)─ 100%0%Installing libndr-krb5pac0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (ins
│ │Installing libndr-krb5pac0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (i─ 4896%100 1431431430%Downloading libsmbldap2 (download size 438.7 KiB)│ │~nstalled size 66.1 KiB)│ │Downloading libsmbldap2 (download size 438.7 KiB)─ 100%0%Installing libsmbldap2-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (install
│ │Installing libsmbldap2-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (insta─ 4896%100 0820820820%Downloading libnetapi0 (download size 535.8 KiB)│ │~lled size 66 KiB)│ │Downloading libnetapi0 (download size 535.8 KiB)─ 100%0%Installing libnetapi0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installe
│ │Installing libnetapi0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (instal─ 6 12 8 24 31 7 43 4956% 62% 8 74 80 7 93 9 100 2.512.512.510%Downloading samba-libs-python3 (download size 509 KiB)│ │~led size 514 KiB)│ │Downloading samba-libs-python3 (download size 509 KiB)─ 100%0%Installing samba-libs-python3-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (
│ │Installing samba-libs-python3-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm─ 8 16 24 32 40 4957% 65% 73 81 9 9 100 2002002000%Downloading libsmbclient0 (download size 478.3 KiB)│ │~ (installed size 390.3 KiB)│ │Downloading libsmbclient0 (download size 478.3 KiB)─ 100%0%Installing libsmbclient0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (insta
│ │Installing libsmbclient0-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (ins─ 16 33 4965% 82 98 100 01 901 9019 packages) 0%Downloading libsamba-policy0-python3 (download size 443 KiB)│ │~talled size 194 KiB)│ │Downloading libsamba-policy0-python3 (download size 443 KiB) ─ 100%0%Installing libsamba-policy0-python3-4.14.6+git.182.2205d5224e3-1.1.aarch64
│ │Installing libsamba-policy0-python3-4.14.6+git.182.2205d5224e3-1.1.aarch─ 4896%100 1.9481.9481.9480%Downloading cifs-utils (download size 101.8 KiB)│ │~64.rpm (installed size 66.2 KiB)│ │Downloading cifs-utils (download size 101.8 KiB)─ 100%0%Installing cifs-utils-6.13-1.2.aarch64.rpm (installed size 522 KiB)
│ │Installing cifs-utils-6.13-1.2.aarch64.rpm (installed size 522 KiB) ─ 6 12 8 25 31 7 44 506% 62% 8 75 81 7 94 9 100 437143712 431, 70%Downloading samba-client (download size 1.62 MiB)
│ │Downloading samba-client (download size 1.62 MiB)─ 100%0%Installing samba-client-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (instal
│ │Installing samba-client-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (inst─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 26.1560926.1560926.1509, 60%Downloading patterns-base-enhanced_base (download size 128.9 KiB) │ │~alled size 5.28 MiB)│ │Downloading patterns-base-enhanced_base (download size 128.9 KiB) ─ 100%0%Installing patterns-base-enhanced_base-20200505-23.1.aarch64.rpm (installe
│ │Installing patterns-base-enhanced_base-20200505-23.1.aarch64.rpm (instal─ 2974%1005550%Downloading samba (download size 599.3 KiB)│ │~led size 59 B)│ │Downloading samba (download size 599.3 KiB)─ 100%0%Installing samba-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installed siz
│ │Installing samba-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (installed s─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 │Remaining│Packages│Time │ Remaining│Packages│ TimeTotal│ 22.38 MiB│ 4│ 00:09openSUSE-20210927-0│ 22.38 MiB│4│ 00:082.3840%Downloading samba-python3 (download size 3.14 MiB)│ │~ize 3.77 MiB)│ │Downloading samba-python3 (download size 3.14 MiB)─ 100%0%Installing samba-python3-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (insta
│ │Installing samba-python3-4.14.6+git.182.2205d5224e3-1.1.aarch64.rpm (ins─ 5 10 5 20 5 30 5 40 45 505% 60% 5 70 5 80 5 90 5 100 646.4 K30646.4 K303 646.4 KiB, 3 packages) 0%Downloading yast2-samba-client (download size 66.2 KiB)│ │~talled size 21.75 MiB)│ │Downloading yast2-samba-client (download size 66.2 KiB)─ 100%0%Installing yast2-samba-client-4.4.1-1.1.noarch.rpm (installed size 259.7 K
│ │Installing yast2-samba-client-4.4.1-1.1.noarch.rpm (installed size 259.7─ 6 20 9 42 56% 63% 76 82 8 99 100 386.72386.72386.720%Downloading yast2-samba-server (download size 79.3 KiB)│ │~ KiB)│ │Downloading yast2-samba-server (download size 79.3 KiB)─ 100%0%Installing yast2-samba-server-4.4.0-1.1.noarch.rpm (installed size 386.7 K
│ │Installing yast2-samba-server-4.4.0-1.1.noarch.rpm (installed size 386.7─ 5 10 7 25 34 40 45 519% 64 9 74 81 9 95 100 58 1 58 158 B, 1 packages) 0%Downloading patterns-yast-yast2_server (download size 11.9 KiB) │ │~ KiB)│ │Downloading patterns-yast-yast2_server (download size 11.9 KiB) ─ 100%0%Installing patterns-yast-yast2_server-20210809-1.1.aarch64.rpm (installed
│ │Installing patterns-yast-yast2_server-20210809-1.1.aarch64.rpm (installe─ 2974%100Done. 4 0 packages) Performing Installation ┌────┐│Media │ Remaining│Packages│ Time ││Total │ │ │ 00:00 ││openSUSE-20210927-0│ Done.│ │ ││ ││ │└────┘┌Actions performed:────┐│Downloading yast2-samba-server (download size 79.3 KiB) ││Installing yast2-samba-server-4.4.0-1.1.noarch.rpm (installed size 386.7 ││~ KiB) ││Downloading patterns-yast-yast2_server (download size 11.9 KiB) ││Installing patterns-yast-yast2_server-20210809-1.1.aarch64.rpm (installe ─└────┘Installing patterns-yast-yast2_server-20210809-1.1.aarch64.rpm (installed size Installing Packages... (Remaining: 0 packages) [Next] F10 Next[Back] F8 Back F9 Abort F10 Next[Back][Next][Back][Next] F10 Next[Next][Back]ackage Installation Package Installation 9 Aborterforming InstallationPerforming Installation ┌────────────────────────────────────────────────────────────────────────────┐│Media│ Remaining│Packages│ Time││Total│ 22.38 MiB│ 4│ 00:09││openSUSE-20210927-0│ 22.38 MiB│4│ 00:08│││││└────────────────────────────────────────────────────────────────────────────┘┌Actions performed:──────────────────────────────────────────────────────────┐││││││││││└────────────────────────────────────────────────────────────────────────────┘Installing patterns-yast-yast2_server-20210809-1.1.aarch64.rpm (installed size100%Installing Packages... (Remaining: 0 packages)84% Actions performed: ││││Finishing Basic Installation0%Creating list of finish scripts to call...Creating list of finish scripts to call...2Checking stage: Copy files to installed system...4Save configuration... 60% installation settings...8Install boot manager... 10Prepare system for initial boot...opy files to installed system Copy files to installed system0%opying files to installed system...* Copying files to installed system...50Moving to installed system... 5 * Moving to installed system...100%7 Save configuration Save configuration0%Setting up linker cache... * Setting up linker cache... 8Calling step save_config_finish...* Calling step save_config_finish... 16Saving default systemd target... * Saving default systemd target... 25Initializing default window manager...8 * Initializing default window manager... 33Saving file system configuration... * Saving file system configuration... 41iSCSI configuration... * Saving iSCSI configuration... 50fcoe configuration... * Saving fcoe configuration...8% Updating kernel module dependencies...
┬ │ * Updating kernel module dependencies...┮66 Copying X Window System configuration into system...9
│┬│ │ * Copying X Window System configuration into system...┮75 Saving proxy configuration...
│┬│ │ * Saving proxy configuration...┮83 Calling step driver_update1_finish...
│┬│ │ * Calling step driver_update1_finish...┮91 Saving system settings... 90
│┬│ │ * Saving system settings...┮100 installation settings
│┬│ │Save installation settings┮0%Writing YaST configuration...
│┬│ │ * Writing YaST configuration...┮ 1Saving network configuration...
│┬│ │ * Saving network configuration...┮ 2Writing Security Configuration...1
│┬│ │ * Writing Security Configuration...┮ 3Saving hardware configuration...
│┬│ │ * Saving hardware configuration...┮ 4Writing Users Configuration...
│┬│ │ * Writing Users Configuration...┮ 50automatic configuration...2
│┬│ │ * Writing automatic configuration...┮60% specific role configuration ...
│┬│ │ * Writing specific role configuration ...┮7 Adapting system services ...
│┬│ │ * Adapting system services ...┮8 Setting default target and system services ...
│┬│ │ * Setting default target and system services ...┮9 aving the software manager configuration... 3
│┬│ │ * Saving the software manager configuration...┮10 Install boot manager
│┬│ │Install boot manager┮0%kdump configuration...
│┬│ │ * Saving kdump configuration...┮50bootloader configuration...5
│┬│ │ * Saving bootloader configuration...┮100%6Prepare system for initial boot
│┬│ │Prepare system for initial boot┮0%Copying log files to installed system...
│┬│ │ * Copying log files to installed system...┮2hecking the installed system... 7
│┬│ │ * Checking the installed system...┮4reating root filesystem snapshot...8
│┬│ │ * Creating root filesystem snapshot...┮ 60% alling step driver_update2_finish...
│┬│ │ * Calling step driver_update2_finish...┮8Unmounting all mounted devices... 9
│┬│ │ * Unmounting all mounted devices...┮10100
│┬│ │Finished┮┌──────────────────────────────────────────────────────────────┐│ ┌──────────────────────────────────────────────────────────┐ │ │ │The system will reboot now...│ │ │ ││ │ │ ││ │ │ ││ │ │ ││ │ │ ││ │ │ ││ │ │ ││ │ │ └──────────────────────────────────────────────────────────┘ │ │ 10│ ││ ││ │[OK] [Stop]│ └──────────────────────────────────────────────────────────────┘ ┌──────────────────────────────────────────────────────────────┐│ ┌──────────────────────────────────────────────────────────┐ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ ││ └──────────────────────────────────────────────────────────┘ │││││││││└──────────────────────────────────────────────────────────────┘0 OK┌──────────────────────────────────────────────────────────┐││││││││││││││││└──────────────────────────────────────────────────────────┘[OK]┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘9 ┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘8┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘7┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘6┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘5┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘4┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘┌──────────────────────────────────────────────────────────────┐│││││││││││││││││││││││││││[OK]│└──────────────────────────────────────────────────────────────┘ting default target and system services ...ing the software manager configuration...l boot managering kdump configuration...ing bootloader configuration...e system for initial bootying log files to installed system...cking the installed system...ating root filesystem snapshot...ling step driver_update2_finish...ounting all mounted devices...ed ─────────────────────────────────────────────────────────────────ing all mounted devices... 100% system for initial boot100% Performing Installation ┌Actions performed:┐ │ * Setting default target and system services ...│ │ * Saving the software manager configuration...│ │Install boot manager│ │ * Saving kdump configuration...│ │ * Saving bootloader configuration...│ │Prepare system for initial boot│ │ * Copying log files to installed system...│ │ * Checking the installed system...│ │ * Creating root filesystem snapshot...┬ │ * Calling step driver_update2_finish...│ │ * Unmounting all mounted devices...│ │Finished┮ └├──────┘ Unmounting all mounted devices... Prepare system for initial boot [Next] Help F9 Abort F10 Next[Back] F8 Back F9 Abort F10 Next[Help]┌Actions performed:──────────────────────────────────────────────────────┐│││││││││││││││││┬│││││┎└├───────────────────────────────────────────────────────────────────────┘ ┌Actions performed:──────────────────────────────────────────────────────┐│││││││││││││││││┬│││││┎└├───────────────────────────────────────────────────────────────────────┘[Next]┌─────────────────────────────┐│Finishing the installation...│ └─────────────────────────────┘ ┌─────────────────────────────┐││└─────────────────────────────┘ to installed system... alled system...esystem snapshot... r_update2_finish...  Language, Keyboard and License Agreement [☰] LanguageKeyboard Layout English (US)▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓ English (US)▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒↓ Keyboard Test ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ License Agreement ┌────────────────────────────────────────────────────────────────────────────┐ │LICENSE AGREEMENT─ │openSUSE® Tumbleweed│ ││ │This agreement governs your download, installation, or use│ │of openSUSE Tumbleweed and its updates, regardless of the delivery │ │mechanism. openSUSE Tumbleweed is a collective work under US Copyright │ │Law. Subject to the following terms, The openSUSE Project grants to │ │you a license to this collective work pursuant to the GNU General │ └├───────────────────────────────────────────────────────────────────────────┘ [License Translations...] [Next]  [Next] F1 Help F8 Back F9 Abort F10 Next@[ 1565.109406][ T1] reboot: Restarting system
U-Boot SPL 2021.04-5.10.35-2.0.0+g79943c815e (Aug 26 2021 - 10:28:03 +0000)
DDRINFO: start DRAM init
DDRINFO: DRAM rate 3000MTS
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
SEC0: RNG instantiated
Normal Boot
WDT: Not found!
Trying to boot from BOOTROM
image offset 0x0, pagesize 0x200, ivt offset 0x0
Authenticate image from DDR location 0x401fcdc0...
NOTICE: BL31: v2.4(release):lf-5.10.35-2.0.0-rc2-0-gec35fef92
NOTICE: BL31: Built : 09:05:55, May 28 2021
U-Boot 2021.04-5.10.35-2.0.0+g79943c815e (Aug 26 2021 - 10:28:03 +0000)
CPU: i.MX8MP[6] rev1.1 1600 MHz (running at 1200 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 48C
Reset cause: POR
Model: AAEON SRG-IM8P IoT Gateway
DRAM: 2 GiB
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
[*]-Video Link 0fail to find output device
probe video device failed, ret -19
[0] lcd-controller@32e80000, video
fail to find output device
probe video device failed, ret -19
In: serial
Out: serial
Err: serial
SEC0: RNG instantiated
BuildInfo:
- ATF ec35fef
flash target is MMC:2
Net:
Warning: ethernet@30be0000 (eth0) using random MAC address - 52:80:c2:d5:1c:a2
Warning: ethernet@30bf0000 (eth1) using random MAC address - ae:23:34:d2:c5:d9
eth0: ethernet@30be0000, eth1: ethernet@30bf0000 [PRIME]
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 2  1  0
starting USB...
Bus dwc3@38100000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus dwc3@38200000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus dwc3@38100000 for devices... 3 USB Device(s) found
scanning bus dwc3@38200000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
MMC: no card present
MMC Device 0 not found
no mmc device at slot 0
MMC: no card present
MMC: no card present
MMC: no card present
MMC: no card present
MMC: no card present
switch to partitions #0, OK
mmc2(part 0) is current device
Scanning mmc 2:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
MMC: no card present
Scanning disk [email protected]...
Disk [email protected] not ready
Scanning disk [email protected]...
Bad magic number for SquashFS image.
** Unrecognized filesystem type **
Found 4 disks
fail to find output device
ERROR: invalid device tree
Found EFI removable media binary efi/boot/bootaa64.efi
853872 bytes read in 10 ms (81.4 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Remove /soc@0/bus@30800000/ethernet@30be0000:phy-reset-gpios
Remove /soc@0/bus@30800000/ethernet@30bf0000:phy-reset-gpios
Booting /efi\boot\bootaa64.efi
Welcome to GRUB!
ethernet@30bf0000 Waiting for PHY auto negotiation to complete.. done
.Please press 't' to show the boot menu on this console
error: ../../grub-core/video/video.c:761:no suitable video mode found.
GNU GRUB version 2.06
┌───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││││└───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ Use the ▲ and â–Œ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. *openSUSE Tumbleweed Advanced options for openSUSE Tumbleweed The highlighted entry will be executed automatically in 8s. The highlighted entry will be executed automatically in 7s. The highlighted entry will be executed automatically in 6s. The highlighted entry will be executed automatically in 5s. The highlighted entry will be executed automatically in 4s. Loading Linux 5.14.6-1-default ...
Loading initial ramdisk ...
EFI stub: ERROR: FIRMWARE BUG: kernel image not aligned on 64k boundary
EFI stub: ERROR: FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region
[ 0.098994][ T1] debugfs: Directory 'dummy-iomuxc-gpr@30340000' with parent 'regmap' already present!
[ 0.969886][ T1] debugfs: Directory 'dummy-reset-controller@30390000' with parent 'regmap' already present!
1;-1f[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password R
s to Plymouth Directory Watch.
[ OK ] Reached target Path Units.
[ OK ] Reached target Basic System.
[ 9.560876][ T332] nxp-pca9450 0-0025: No IRQ configured?
[ OK ] Found device /dev/disk/by-uuid/4BAE-58D7.
[ OK ] Found device /dev/disk/by-
6-6579-48d1-91bb-fa9c9d00e2f8.
[ OK ] Reached target Initrd Root Device.
[ OK ] Finished dracut initqueue hook.
[ OK ] Reached target Preparation for Remote File Systems.
[ OK ] Reached target Remote File Systems.
Starting File System Check
6579-48d1-91bb-fa9c9d00e2f8...
[ OK ] Finished File System Check
6-6579-48d1-91bb-fa9c9d00e2f8.
Mounting /sysroot...
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK ] Finished Reload Configuration from the Real Root.
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped target Initrd Default Target.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Initrd Root Device.
[ OK ] Stopped target Initrd /usr File System.
[ OK ] Stopped target Path Units.
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Preparation for Remote File Systems.
[ OK ] Stopped target Slice Units.
[ OK ] Stopped target Socket Units.
[ OK ] Stopped target System Initialization.
[ OK ] Stopped target Swaps.
[ OK ] Stopped target Timer Units.
[ OK ] Stopped dracut initqueue hook.
Starting Tell haveged about new root...
Starting Plymouth switch root service...
[ OK ] Stopped Apply Kernel Variables.
[ OK ] Stopped Load Kernel Modules.
[ OK ] Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
[ OK ] Stopped Coldplug All udev Devices.
Stopping Rule-based Manage
for Device Events and Files...
[ OK ] Finished Tell haveged about new root.
[ OK ] Finished Cleaning Up and Shutting Down Daemons.
[ OK ] Finished Plymouth switch root service.
[ OK ] Stopped Rule-based Manager for Device Events and Files.
[ OK ] Closed udev Control Socket.
[ OK ] Closed udev Kernel Socket.
[ OK ] Stopped dracut pre-udev hook.
[ OK ] Stopped dracut cmdline hook.
[ OK ] Stopped dracut ask for additional cmdline parameters.
Starting Cleanup udev Database...
[ OK ] Stopped Create Static Device Nodes in /dev.
[ OK ] Stopped Create List of Static Device Nodes.
[ OK ] Finished Cleanup udev Database.
[ OK ] Reached target Switch Root.
Starting Switch Root...
[ OK ] Stopped Switch Root.
[ OK ] Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/systemd-fsck.
[ OK ] Created slice User and Session Slice.
[ OK ] Set up automount Arbitrary
s File System Automount Point.
[ OK ] Stopped target Switch Root.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd Root File System.
[ OK ] Reached target Slice Units.
[ OK ] Reached target Swaps.
[ OK ] Reached target Local Verity Integrity Protected Volumes.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Mounting Huge Pages File System...
Mounting POSIX Message Queue File System...
Mounting Kernel Debug File System...
Mounting Kernel Trace File System...
Mounting Temporary Directory /tmp...
Starting Create List of Static Device Nodes...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module fuse...
[ OK ] Stopped Show Plymouth Boot Screen.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Stopped Plymouth switch root service.
[ OK ] Stopped File System Check on Root Device.
[ OK ] Stopped Journal Service.
[ OK ] Stopped Entropy Daemon based on the HAVEGE algorithm.
[ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
Starting Journal Service...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Coldplug All udev Devices...
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
Mounting Kernel Configuration File System...
[ OK ] Finished Load Kernel Modules.
Starting Apply Kernel Variables for 5.14.6-1-default...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load Kernel Module fuse.
Mounting FUSE Control File System...
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Mounted FUSE Control File System.
Starting Rebuild Hardware Database...
Starting Create System Users...
[ OK ] Started Journal Service.
[ OK ] Finished Apply Kernel Variables for 5.14.6-1-default.
Starting Apply Kernel Variables...
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /boot/grub2/arm64-efi...
Mounting /home...
Mounting /opt...
Mounting /root...
Mounting /srv...
Mounting /usr/local...
Mounting /var...
Starting File System Check
/dev/disk/by-uuid/4BAE-58D7...
[ OK ] Mounted /boot/grub2/arm64-efi.
[ OK ] Mounted /home.
[ OK ] Mounted /opt.
[ OK ] Mounted /root.
[ OK ] Mounted /srv.
[ OK ] Mounted /usr/local.
[ OK ] Mounted /var.
Starting Load AppArmor profiles...
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
[ OK ] Finished Load/Save Random Seed.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished File System Check
n /dev/disk/by-uuid/4BAE-58D7.
Mounting /boot/efi...
[ OK ] Finished Coldplug All udev Devices.
Starting Wait for udev To 
plete Device Initialization...
[ OK ] Mounted /boot/efi.
[ OK ] Reached target Local File Systems.
Starting Restore /run/initramfs on shutdown...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Commit a transient machine-id on disk...
Starting Create Volatile Files and Directories...
[ OK ] Finished Restore /run/initramfs on shutdown.
[ OK ] Finished Tell Plymouth To Write Out Runtime Data.
[ OK ] Finished Create Volatile Files and Directories.
Starting Security Auditing Service...
Starting Rebuild Journal Catalog...
[ OK ] Finished Commit a transient machine-id on disk.
[ OK ] Finished Rebuild Journal Catalog.
[ OK ] Started Security Auditing Service.
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Finished Rebuild Hardware Database.
Starting Rule-based Manage
for Device Events and Files...
Starting Update is Completed...
[ OK ] Finished Update is Completed.
[ OK ] Started Rule-based Manager for Device Events and Files.
Starting Load Kernel Module configfs...
[ OK ] Finished Load Kernel Module configfs.
[ 18.039137][ T367] tpm tpm0: A TPM error (256) occurred attempting the self test
[ OK ] Finished Wait for udev To Complete Device Initialization.
[ OK ] Finished Load AppArmor profiles.
[ OK ] Reached target System Initialization.
[ OK ] Started Watch /etc/sysconfig/btrfsmaintenance.
[ OK ] Started Watch for changes in CA certificates.
[ OK ] Started CUPS Scheduler.
[ OK ] Started Watch for changes in issue snippets.
[ OK ] Started Watch for changes 
 smartmontools sysconfig file.
[ OK ] Started Backup of RPM database.
[ OK ] Started Balance block groups on a btrfs filesystem.
[ OK ] Started Defragment file data and/or directory metadata.
[ OK ] Started Scrub btrfs filesystem, verify block checksums.
[ OK ] Started Discard unused blocks on a mounted filesystem.
[ OK ] Started Check if mainboard battery is Ok.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily man-db regeneration.
[ OK ] Started Daily Cleanup of Snapper Snapshots.
[ OK ] Started Timeline of Snapper Snapshots.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Path Units.
[ OK ] Listening on CUPS Scheduler.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
Starting firewalld - dynamic firewall daemon...
[ OK ] Started irqbalance daemon.
Starting One time configuration for iscsid.service...
Starting Generate issue file for login session...
Starting Apply settings from /etc/sysconfig/keyboard...
Starting Name Service Cache Daemon...
Starting Self Monitoring a
g Technology (SMART) Daemon...
[ OK ] Finished One time configuration for iscsid.service.
[ OK ] Started Name Service Cache Daemon.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
Starting User Login Management...
[ OK ] Finished Generate issue file for login session.
[FAILED] Failed to start Self Monit
ing Technology (SMART) Daemon.
See 'systemctl status smartd.service' for details.
[ OK ] Finished Apply settings from /etc/sysconfig/keyboard.
[ OK ] Started User Login Management.
[ OK ] Started firewalld - dynamic firewall daemon.
[ OK ] Reached target Preparation for Network.
Starting wicked AutoIPv4 supplicant service...
Starting wicked DHCPv4 supplicant service...
Starting wicked DHCPv6 supplicant service...
[ OK ] Started wicked AutoIPv4 supplicant service.
[ OK ] Started wicked DHCPv4 supplicant service.
[ OK ] Started wicked DHCPv6 supplicant service.
Starting wicked network management service daemon...
[ OK ] Listening on Load/Save RF 
itch Status /dev/rfkill Watch.
[ OK ] Started wicked network management service daemon.
Starting wicked network nanny service...
[ OK ] Started wicked network nanny service.
Starting wicked managed network interfaces...
Starting Authorization Manager...
[ OK ] Started Authorization Manager.
[ OK ] Finished wicked managed network interfaces.
[ OK ] Reached target Network.
[ OK ] Started Backup of /etc/sysconfig.
[ OK ] Reached target Network is Online.
[ OK ] Reached target Timer Units.
Starting Login and scanning of iSCSI devices...
Starting Postfix Mail Transport Agent...
Starting OpenSSH Daemon...
[ OK ] Finished Login and scanning of iSCSI devices.
[ OK ] Reached target Remote File Systems.
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
Starting Hold until boot process finishes up...
Starting Terminate Plymouth Boot Screen...
Welcome to openSUSE Tumbleweed 20210927 - Kernel 5.14.6-1-default (ttymxc1).
eth0:
localhost login: aaeon
Password:
Have a lot of fun...
You have no mail.
aaeon@localhost:~> dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.14.6-1-default (geeko@buildhost) (gcc (SUSE Linux) 11.2.1 20210816 [revision 056e324ce46a7924b5cf10f61010cf9dd2ca10e9], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.37.20210803-1) #1 SMP Mon Sep 20 07:02:13 UTC 2021 (6131a3c)
[ 0.000000] Machine model: AAEON SRG-IM8P IoT Gateway
[ 0.000000] efi: EFI v2.80 by Das U-Boot
[ 0.000000] efi: RTPROP=0xbaed1040 SMBIOS=0xbaecd000 MOKvar=0xbadec000 MEMRESERVE=0xbab1a040
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000005b000000, size 960 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xbfbd5480-0xbfbd9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000055ffffff]
[ 0.000000] node 0: [mem 0x0000000056000000-0x0000000057ffffff]
[ 0.000000] node 0: [mem 0x0000000058000000-0x00000000baec4fff]
[ 0.000000] node 0: [mem 0x00000000baec5000-0x00000000baecbfff]
[ 0.000000] node 0: [mem 0x00000000baecc000-0x00000000baeccfff]
[ 0.000000] node 0: [mem 0x00000000baecd000-0x00000000baecdfff]
[ 0.000000] node 0: [mem 0x00000000baece000-0x00000000baecffff]
[ 0.000000] node 0: [mem 0x00000000baed0000-0x00000000baed3fff]
[ 0.000000] node 0: [mem 0x00000000baed4000-0x00000000baed4fff]
[ 0.000000] node 0: [mem 0x00000000baed5000-0x00000000baed9fff]
[ 0.000000] node 0: [mem 0x00000000baeda000-0x00000000baedafff]
[ 0.000000] node 0: [mem 0x00000000baedb000-0x00000000baedbfff]
[ 0.000000] node 0: [mem 0x00000000baedc000-0x00000000baedcfff]
[ 0.000000] node 0: [mem 0x00000000baedd000-0x00000000baeddfff]
[ 0.000000] node 0: [mem 0x00000000baede000-0x00000000baedffff]
[ 0.000000] node 0: [mem 0x00000000baee0000-0x00000000baee0fff]
[ 0.000000] node 0: [mem 0x00000000baee1000-0x00000000bdedffff]
[ 0.000000] node 0: [mem 0x00000000bdee0000-0x00000000bdefffff]
[ 0.000000] node 0: [mem 0x00000000bdf00000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 34 pages/cpu s100248 r8192 d30824 u139264
[ 0.000000] pcpu-alloc: s100248 r8192 d30824 u139264 alloc=34*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.14.6-1-default root=UUID=f7e67c46-6579-48d1-91bb-fa9c9d00e2f8 splash=silent mitigations=auto quiet
[ 0.000000] Unknown command line parameters: BOOT_IMAGE=/boot/Image-5.14.6-1-default splash=silent
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 131012K/2097152K available (13632K kernel code, 3312K rwdata, 11480K rodata, 6848K init, 1606K bss, 131924K reserved, 983040K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x580 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 44445 entries in 174 pages
[ 0.000000] ftrace: allocated 174 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=480 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 160 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[ 0.000001] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[ 0.000940] Console: colour dummy device 80x25
[ 0.000976] printk: console [tty0] enabled
[ 0.001058] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=80000)
[ 0.001070] pid_max: default: 32768 minimum: 301
[ 0.001169] LSM: Security Framework initializing
[ 0.001250] AppArmor: AppArmor initialized
[ 0.001340] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001354] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002879] rcu: Hierarchical SRCU implementation.
[ 0.005204] Remapping and enabling EFI services.
[ 0.005556] smp: Bringing up secondary CPUs ...
[ 0.006020] Detected VIPT I-cache on CPU1
[ 0.006048] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[ 0.006090] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006606] Detected VIPT I-cache on CPU2
[ 0.006626] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[ 0.006649] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007106] Detected VIPT I-cache on CPU3
[ 0.007126] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[ 0.007146] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007210] smp: Brought up 1 node, 4 CPUs
[ 0.007221] SMP: Total of 4 processors activated.
[ 0.007226] CPU features: detected: 32-bit EL0 Support
[ 0.007229] CPU features: detected: 32-bit EL1 Support
[ 0.007234] CPU features: detected: CRC32 instructions
[ 0.007323] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.015353] CPU: All CPU(s) started at EL2
[ 0.015395] alternatives: patching kernel code
[ 0.036445] node 0 deferred pages initialised in 20ms
[ 0.037558] devtmpfs: initialized
[ 0.044630] Registered cp15_barrier emulation handler
[ 0.044649] Registered setend emulation handler
[ 0.044658] KASLR disabled due to lack of seed
[ 0.044861] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.044877] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.083352] pinctrl core: initialized pinctrl subsystem
[ 0.084244] SMBIOS 3.0 present.
[ 0.084262] DMI: /, BIOS 2021.04-5.10.35-2.0.0+g79943c815e 08/26/2021
[ 0.084687] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.085809] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.085899] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.086007] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.086054] audit: initializing netlink subsys (disabled)
[ 0.086168] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1
[ 0.087236] thermal_sys: Registered thermal governor 'fair_share'
[ 0.087242] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.087247] thermal_sys: Registered thermal governor 'step_wise'
[ 0.087250] thermal_sys: Registered thermal governor 'user_space'
[ 0.087549] cpuidle: using governor ladder
[ 0.087566] cpuidle: using governor menu
[ 0.087687] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.087776] ASID allocator initialised with 32768 entries
[ 0.089011] Serial: AMBA PL011 UART driver
[ 0.098994] debugfs: Directory 'dummy-iomuxc-gpr@30340000' with parent 'regmap' already present!
[ 0.099260] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[ 0.119115] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.119131] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.119137] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.119142] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.818341] wait_for_initramfs() called before rootfs_initcalls
[ 0.831123] ACPI: Interpreter disabled.
[ 0.831965] iommu: Default domain type: Passthrough
[ 0.832206] vgaarb: loaded
[ 0.832578] SCSI subsystem initialized
[ 0.832717] libata version 3.00 loaded.
[ 0.832992] pps_core: LinuxPPS API ver. 1 registered
[ 0.832997] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.833010] PTP clock support registered
[ 0.833145] EDAC MC: Ver: 3.0.0
[ 0.833240] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[ 0.833899] Registered efivars operations
[ 0.834924] NetLabel: Initializing
[ 0.834930] NetLabel: domain hash size = 128
[ 0.834934] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.834994] NetLabel: unlabeled traffic allowed by default
[ 0.835401] clocksource: Switched to clocksource arch_sys_counter
[ 0.871637] VFS: Disk quotas dquot_6.6.0
[ 0.871700] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.872219] AppArmor: AppArmor Filesystem Enabled
[ 0.872277] pnp: PnP ACPI: disabled
[ 0.878383] NET: Registered PF_INET protocol family
[ 0.878501] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.879466] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.879499] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.879646] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.879862] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.880019] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.880090] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.880134] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.880288] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.880311] NET: Registered PF_XDP protocol family
[ 0.880322] PCI: CLS 0 bytes, default 64
[ 0.880672] Trying to unpack rootfs image as initramfs...
[ 0.896151] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.896560] kvm [1]: IPA Size Limit: 40 bits
[ 0.899053] kvm [1]: GICv3: no GICV resource entry
[ 0.899058] kvm [1]: disabling GICv2 emulation
[ 0.899074] kvm [1]: GIC system register CPU interface enabled
[ 0.899716] kvm [1]: vgic interrupt IRQ9
[ 0.901069] kvm [1]: Hyp mode initialized successfully
[ 0.902717] Initialise system trusted keyrings
[ 0.902741] Key type blacklist registered
[ 0.902919] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[ 0.908083] zbud: loaded
[ 0.909120] integrity: Platform Keyring initialized
[ 0.945569] Key type asymmetric registered
[ 0.945587] Asymmetric key parser 'x509' registered
[ 0.945643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.945799] io scheduler mq-deadline registered
[ 0.945805] io scheduler kyber registered
[ 0.945980] io scheduler bfq registered
[ 0.951333] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.966856] SoC: i.MX8MP revision 1.1
[ 0.969886] debugfs: Directory 'dummy-reset-controller@30390000' with parent 'regmap' already present!
[ 0.970733] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.978464] Serial: AMBA driver
[ 0.979092] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 30, base_baud = 1500000) is a IMX
[ 0.979115] imx-uart 30890000.serial: Console IMX rounded baud rate from 114286 to 114300
[ 0.998715] printk: console [ttymxc1] enabled
[ 0.999676] msm_serial: driver initialized
[ 1.003870] libphy: Fixed MDIO Bus: probed
[ 1.004553] mousedev: PS/2 mouse device common for all mice
[ 1.008042] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.008475] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.008716] hid: raw HID events driver (C) Jiri Kosina
[ 4.245209] Freeing initrd memory: 12808K
[ 4.246536] drop_monitor: Initializing network drop monitor service
[ 4.247170] NET: Registered PF_INET6 protocol family
[ 4.272896] Segment Routing with IPv6
[ 4.272911] RPL Segment Routing with IPv6
[ 4.273608] registered taskstats version 1
[ 4.273787] Loading compiled-in X.509 certificates
[ 4.273892] Loaded X.509 cert 'openSUSE Secure Boot Signkey: 9ddf43d9f1a027273f52c6c0775908ee01671325'
[ 4.274087] zswap: loaded using pool lzo/zbud
[ 4.274253] page_owner is disabled
[ 4.274435] Key type ._fscrypt registered
[ 4.274441] Key type .fscrypt registered
[ 4.274444] Key type fscrypt-provisioning registered
[ 4.299966] Key type encrypted registered
[ 4.299992] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.300151] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[ 4.430036] integrity: Loaded X.509 cert 'openSUSE Secure Boot CA: 6842600de22c4c477e95be23dfea9513e5971762'
[ 4.430054] ima: No TPM chip found, activating TPM-bypass!
[ 4.430063] Loading compiled-in module X.509 certificates
[ 4.430137] Loaded X.509 cert 'openSUSE Secure Boot Signkey: 9ddf43d9f1a027273f52c6c0775908ee01671325'
[ 4.430145] ima: Allocated hash algorithm: sha256
[ 4.430185] ima: No architecture policies found
[ 4.430253] evm: Initialising EVM extended attributes:
[ 4.430257] evm: security.selinux
[ 4.430261] evm: security.SMACK64 (disabled)
[ 4.430264] evm: security.SMACK64EXEC (disabled)
[ 4.430267] evm: security.SMACK64TRANSMUTE (disabled)
[ 4.430271] evm: security.SMACK64MMAP (disabled)
[ 4.430274] evm: security.apparmor
[ 4.430277] evm: security.ima
[ 4.430280] evm: security.capability
[ 4.430284] evm: HMAC attrs: 0x1
[ 4.457588] Freeing unused kernel memory: 6848K
[ 4.545488] Run /init as init process
[ 4.545495] with arguments:
[ 4.545500] /init
[ 4.545504] with environment:
[ 4.545508] HOME=/
[ 4.545512] TERM=linux
[ 4.545515] BOOT_IMAGE=/boot/Image-5.14.6-1-default
[ 4.545519] splash=silent
[ 4.567926] systemd[1]: System time before build time, advancing clock.
[ 4.672262] systemd[1]: systemd 249.4+suse.35.gec72db9ee0 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.673101] systemd[1]: Detected architecture arm64.
[ 4.673115] systemd[1]: Running in initial RAM disk.
[ 4.673334] systemd[1]: No hostname configured, using default hostname.
[ 4.673714] systemd[1]: Hostname set to <localhost>.
[ 4.673985] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.674048] systemd[1]: Initializing machine ID from random generator.
[ 4.906749] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 4.960090] systemd[1]: Queued start job for default target Initrd Default Target.
[ 4.960793] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.960843] systemd[1]: Reached target Initrd /usr File System.
[ 4.961092] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.961124] systemd[1]: Reached target Local File Systems.
[ 4.961240] systemd[1]: Reached target Slice Units.
[ 4.961357] systemd[1]: Reached target Swaps.
[ 4.961448] systemd[1]: Reached target Timer Units.
[ 4.961947] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.962453] systemd[1]: Listening on Journal Socket.
[ 4.962980] systemd[1]: Listening on udev Control Socket.
[ 4.963391] systemd[1]: Listening on udev Kernel Socket.
[ 4.963481] systemd[1]: Reached target Socket Units.
[ 4.968316] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 4.972572] systemd[1]: Starting Create List of Static Device Nodes...
[ 4.979497] systemd[1]: Starting Journal Service...
[ 4.984163] systemd[1]: Starting Load Kernel Modules...
[ 4.988304] systemd[1]: Starting Setup Virtual Console...
[ 4.992505] systemd[1]: Finished Create List of Static Device Nodes.
[ 4.997283] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.024994] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.025812] alua: device handler registered
[ 5.029147] emc: device handler registered
[ 5.033052] systemd[1]: Started Journal Service.
[ 5.033186] rdac: device handler registered
[ 5.067510] device-mapper: uevent: version 1.0.3
[ 5.067779] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 5.811101] random: crng init done
[ 5.811117] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.855404] raid6: neonx8 gen() 2132 MB/s
[ 6.025397] raid6: neonx8 xor() 1591 MB/s
[ 6.195401] raid6: neonx4 gen() 2189 MB/s
[ 6.365403] raid6: neonx4 xor() 1560 MB/s
[ 6.535400] raid6: neonx2 gen() 2093 MB/s
[ 6.705399] raid6: neonx2 xor() 1436 MB/s
[ 6.875407] raid6: neonx1 gen() 1793 MB/s
[ 7.045402] raid6: neonx1 xor() 1216 MB/s
[ 7.215407] raid6: int64x8 gen() 1366 MB/s
[ 7.385402] raid6: int64x8 xor() 773 MB/s
[ 7.555408] raid6: int64x4 gen() 1604 MB/s
[ 7.725403] raid6: int64x4 xor() 846 MB/s
[ 7.895396] raid6: int64x2 gen() 1397 MB/s
[ 8.065405] raid6: int64x2 xor() 747 MB/s
[ 8.235408] raid6: int64x1 gen() 1033 MB/s
[ 8.405397] raid6: int64x1 xor() 517 MB/s
[ 8.405406] raid6: using algorithm neonx4 gen() 2189 MB/s
[ 8.405410] raid6: .... xor() 1560 MB/s, rmw enabled
[ 8.405415] raid6: using neon recovery algorithm
[ 8.410450] xor: measuring software checksum speed
[ 8.414628] 8regs : 2362 MB/sec
[ 8.418202] 32regs : 2797 MB/sec
[ 8.422420] arm64_neon : 2335 MB/sec
[ 8.422425] xor: using function: 32regs (2797 MB/sec)
[ 8.705076] Btrfs loaded, crc32c=crc32c-generic, assert=on, zoned=yes
[ 9.219160] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.239137] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.244557] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.245840] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.290713] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.322414] gpio-142 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 9.322854] i2c i2c-0: IMX I2C adapter registered
[ 9.323368] gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 9.323536] i2c i2c-1: IMX I2C adapter registered
[ 9.323745] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.323951] gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 9.324189] i2c i2c-2: IMX I2C adapter registered
[ 9.325037] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.336026] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator
[ 9.337018] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.337621] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator
[ 9.338618] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.344472] caam 30900000.crypto: device ID = 0x0a16040100000100 (Era 9)
[ 9.344494] caam 30900000.crypto: job rings = 2, qi = 0
[ 9.364545] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.380198] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.385302] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.444695] sdhci: Secure Digital Host Controller Interface driver
[ 9.444711] sdhci: Copyright(c) Pierre Ossman
[ 9.449411] sdhci-pltfm: SDHCI platform and OF driver helper
[ 9.457156] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO
[ 9.472760] cryptd: max_cpu_qlen set to 1000
[ 9.515451] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[ 9.516497] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.519288] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[ 9.520209] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.560876] nxp-pca9450 0-0025: No IRQ configured?
[ 9.566432] nxp-pca9450: probe of 0-0025 failed with error -22
[ 9.580188] rtc-ds1307 2-0068: registered as rtc0
[ 9.582612] rtc-ds1307 2-0068: setting system clock to 2021-09-28T12:59:13 UTC (1632833953)
[ 9.583792] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.596635] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 9.620265] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.672530] mmcblk2: mmc2:0001 DG4016 14.7 GiB
[ 9.672759] mmcblk2boot0: mmc2:0001 DG4016 4.00 MiB
[ 9.672969] mmcblk2boot1: mmc2:0001 DG4016 4.00 MiB
[ 9.673331] mmcblk2rpmb: mmc2:0001 DG4016 4.00 MiB, chardev (236:0)
[ 9.678053] mmcblk2: p1 p2 p3
[ 9.683643] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.706816] usbcore: registered new interface driver usbfs
[ 9.708364] usbcore: registered new interface driver hub
[ 9.708494] usbcore: registered new device driver usb
[ 9.746917] BTRFS: device fsid f7e67c46-6579-48d1-91bb-fa9c9d00e2f8 devid 1 transid 64 /dev/mmcblk2p3 scanned by systemd-udevd (308)
[ 9.792708] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.792755] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 9.793122] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010
[ 9.793182] xhci-hcd xhci-hcd.0.auto: irq 212, io mem 0x38100000
[ 9.793510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 9.793521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.793528] usb usb1: Product: xHCI Host Controller
[ 9.793534] usb usb1: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 9.793539] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 9.795378] hub 1-0:1.0: USB hub found
[ 9.795492] hub 1-0:1.0: 1 port detected
[ 9.796602] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.797697] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.797725] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 9.797743] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 9.797838] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.797954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 9.797964] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.797971] usb usb2: Product: xHCI Host Controller
[ 9.797977] usb usb2: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 9.797982] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 9.798415] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.798577] hub 2-0:1.0: USB hub found
[ 9.798620] hub 2-0:1.0: 1 port detected
[ 9.799261] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 9.799295] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 9.799672] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000000000010010
[ 9.799673] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.799729] xhci-hcd xhci-hcd.1.auto: irq 213, io mem 0x38200000
[ 9.800075] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 9.800091] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.800098] usb usb3: Product: xHCI Host Controller
[ 9.800104] usb usb3: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 9.800109] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 9.800635] hub 3-0:1.0: USB hub found
[ 9.800680] hub 3-0:1.0: 1 port detected
[ 9.801053] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 9.801074] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 9.801094] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 9.801177] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.801285] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[ 9.801295] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.801302] usb usb4: Product: xHCI Host Controller
[ 9.801307] usb usb4: Manufacturer: Linux 5.14.6-1-default xhci-hcd
[ 9.801313] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 9.801691] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 9.801882] hub 4-0:1.0: USB hub found
[ 9.801926] hub 4-0:1.0: 1 port detected
[ 9.802951] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 10.000299] BTRFS info (device mmcblk2p3): flagging fs with big metadata feature
[ 10.000322] BTRFS info (device mmcblk2p3): disk space caching is enabled
[ 10.000328] BTRFS info (device mmcblk2p3): has skinny extents
[ 10.007541] BTRFS info (device mmcblk2p3): enabling ssd optimizations
[ 10.085453] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 10.085505] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 10.266886] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[ 10.266909] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 10.266916] usb 3-1: Product: USB2.0 Hub
[ 10.271307] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 5.11
[ 10.271328] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.271335] usb 1-1: Product: USB2.0 Hub
[ 10.271340] usb 1-1: Manufacturer: GenesysLogic
[ 10.310323] hub 1-1:1.0: USB hub found
[ 10.310756] hub 1-1:1.0: 4 ports detected
[ 10.313576] hub 3-1:1.0: USB hub found
[ 10.313887] hub 3-1:1.0: 4 ports detected
[ 10.377829] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 10.380173] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 10.435554] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 10.478379] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice= 5.11
[ 10.478398] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.478406] usb 2-1: Product: USB3.0 Hub
[ 10.478411] usb 2-1: Manufacturer: GenesysLogic
[ 10.502444] hub 2-1:1.0: USB hub found
[ 10.502763] hub 2-1:1.0: 4 ports detected
[ 10.504889] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 10.695478] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd
[ 10.825840] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6010, bcdDevice= 7.00
[ 10.825864] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.825872] usb 1-1.4: Product: Dual RS232-HS
[ 10.825878] usb 1-1.4: Manufacturer: FTDI
[ 10.829230] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 10.984173] systemd-journald[180]: Received SIGTERM from PID 1 (systemd).
[ 11.165532] systemd[1]: systemd 249.4+suse.35.gec72db9ee0 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 11.166377] systemd[1]: Detected architecture arm64.
[ 11.168217] systemd[1]: Initializing machine ID from random generator.
[ 11.168389] systemd[1]: Installed transient /etc/machine-id file.
[ 11.488427] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 12.132851] systemd[1]: initrd-switch-root.service: Deactivated successfully.
[ 12.133657] systemd[1]: Stopped Switch Root.
[ 12.135231] systemd[1]: haveged.service: Scheduled restart job, restart counter is at 1.
[ 12.136251] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 12.138328] systemd[1]: Created slice Slice /system/getty.
[ 12.140406] systemd[1]: Created slice Slice /system/modprobe.
[ 12.142496] systemd[1]: Created slice Slice /system/serial-getty.
[ 12.144582] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 12.145455] systemd[1]: Created slice User and Session Slice.
[ 12.146539] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.146873] systemd[1]: Stopped target Switch Root.
[ 12.147011] systemd[1]: Stopped target Initrd File Systems.
[ 12.147114] systemd[1]: Stopped target Initrd Root File System.
[ 12.147425] systemd[1]: Reached target Slice Units.
[ 12.147570] systemd[1]: Reached target Swaps.
[ 12.147705] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
[ 12.148134] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 12.148454] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 12.150825] systemd[1]: Listening on udev Control Socket.
[ 12.151485] systemd[1]: Listening on udev Kernel Socket.
[ 12.154539] systemd[1]: Mounting Huge Pages File System...
[ 12.158042] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.161827] systemd[1]: Mounting Kernel Debug File System...
[ 12.165833] systemd[1]: Mounting Kernel Trace File System...
[ 12.170256] systemd[1]: Mounting Temporary Directory /tmp...
[ 12.176880] systemd[1]: Starting Create List of Static Device Nodes...
[ 12.181562] systemd[1]: Starting Load Kernel Module configfs...
[ 12.186545] systemd[1]: Starting Load Kernel Module drm...
[ 12.191684] systemd[1]: Starting Load Kernel Module fuse...
[ 12.192413] systemd[1]: plymouth-start.service: Deactivated successfully.
[ 12.192627] systemd[1]: plymouth-start.service: Unit process 321 (plymouthd) remains running after unit stopped.
[ 12.193629] systemd[1]: Stopped Show Plymouth Boot Screen.
[ 12.194778] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 12.194960] systemd[1]: Reached target Local Encrypted Volumes.
[ 12.195687] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
[ 12.196056] systemd[1]: Stopped Plymouth switch root service.
[ 12.197677] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 12.197893] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ 12.198263] systemd[1]: Stopped File System Check on Root Device.
[ 12.199044] systemd[1]: Stopped Journal Service.
[ 12.199670] systemd[1]: Stopped Entropy Daemon based on the HAVEGE algorithm.
[ 12.203947] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 12.211876] systemd[1]: Starting Journal Service...
[ 12.217383] systemd[1]: Starting Load Kernel Modules...
[ 12.222270] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 12.227471] systemd[1]: Starting Coldplug All udev Devices...
[ 12.233944] systemd[1]: Mounted Huge Pages File System.
[ 12.234918] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.235902] systemd[1]: Mounted Kernel Debug File System.
[ 12.236764] systemd[1]: Mounted Kernel Trace File System.
[ 12.237667] systemd[1]: Mounted Temporary Directory /tmp.
[ 12.239391] systemd[1]: Finished Create List of Static Device Nodes.
[ 12.241279] systemd[1]: [email protected]: Deactivated successfully.
[ 12.242345] systemd[1]: Finished Load Kernel Module configfs.
[ 12.255686] systemd[1]: Mounting Kernel Configuration File System...
[ 12.264650] systemd[1]: Finished Load Kernel Modules.
[ 12.266519] systemd[1]: Condition check resulted in Apply Kernel Variables for 5.14.6-1-default from /boot being skipped.
[ 12.270720] systemd[1]: Starting Apply Kernel Variables for 5.14.6-1-default...
[ 12.274581] systemd[1]: Mounted Kernel Configuration File System.
[ 12.280608] fuse: init (API version 7.34)
[ 12.285126] systemd[1]: [email protected]: Deactivated successfully.
[ 12.286373] systemd[1]: Finished Load Kernel Module fuse.
[ 12.288368] BTRFS info (device mmcblk2p3): disk space caching is enabled
[ 12.292910] systemd[1]: Mounting FUSE Control File System...
[ 12.305649] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 12.309314] systemd[1]: Mounted FUSE Control File System.
[ 12.313449] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 12.333008] systemd[1]: Starting Rebuild Hardware Database...
[ 12.338064] systemd[1]: Starting Create System Users...
[ 12.339386] systemd[1]: Started Journal Service.
[ 12.724726] systemd-journald[505]: Received client request to flush runtime journal.
[ 13.381219] audit: type=1400 audit(1632833957.290:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=539 comm="apparmor_parser"
[ 13.620020] audit: type=1400 audit(1632833957.530:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=540 comm="apparmor_parser"
[ 13.624291] audit: type=1400 audit(1632833957.530:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=540 comm="apparmor_parser"
[ 17.075124] optee: probing for conduit method.
[ 17.075153] optee: revision 3.13 (2c1092df)
[ 17.096246] optee: dynamic shared memory is enabled
[ 17.096589] optee: initialized driver
[ 17.097399] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.280360] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.340409] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.365281] CAN device driver interface
[ 17.441981] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.443079] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.447118] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.473362] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.559541] npct750@0 enforce active low on chipselect handle
[ 17.565671] pps pps0: new PPS source ptp0
[ 17.581558] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.583817] libphy: fec_enet_mii_bus: probed
[ 17.605530] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.646162] usbcore: registered new interface driver usbserial_generic
[ 17.646211] usbserial: USB Serial support registered for generic
[ 17.664742] usbcore: registered new interface driver ftdi_sio
[ 17.664807] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 17.665045] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 17.665233] usb 1-1.4: Detected FT2232H
[ 17.676479] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 17.677336] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.678762] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.683141] ftdi_sio 1-1.4:1.1: FTDI USB Serial Device converter detected
[ 17.683461] usb 1-1.4: Detected FT2232H
[ 17.684178] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 17.685071] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.694680] fec 30be0000.ethernet eth0: registered PHC device 0
[ 17.694730] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 17.695911] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.034789] tpm_tis_spi spi1.0: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 18.039137] tpm tpm0: A TPM error (256) occurred attempting the self test
[ 18.046726] tpm tpm0: starting up the TPM manually
[ 18.095729] spi-nor spi0.0: n25q256ax1 (32768 Kbytes)
[ 18.207177] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 18.253338] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 19.211682] alg: No test for authenc(hmac(sha224),ecb(cipher_null)) (authenc-hmac-sha224-ecb-cipher_null-caam)
[ 19.225493] alg: No test for authenc(hmac(sha256),ecb(cipher_null)) (authenc-hmac-sha256-ecb-cipher_null-caam)
[ 19.235492] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
[ 19.244003] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam)
[ 19.375519] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam)
[ 19.385496] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
[ 19.395524] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam)
[ 19.525469] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam)
[ 19.532169] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
[ 19.540246] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
[ 19.572156] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
[ 19.615513] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
[ 19.655485] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
[ 19.665911] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
[ 19.675761] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam)
[ 19.715478] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam)
[ 19.755523] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam)
[ 19.795513] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam)
[ 19.805981] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes))) (authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 19.815478] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 19.818206] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
[ 19.818351] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes))) (authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 19.819573] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 19.819929] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes)))) (seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
[ 19.819955] caam algorithms registered in /proc/crypto
[ 21.652253] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
[ 21.652283] caam 30900000.crypto: registering rng-caam
[ 21.654378] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 21.664306] pwm-backlight lvds_backlight: supply power not found, using dummy regulator
[ 23.710424] bpfilter: Loaded bpfilter_umh pid 839
[ 23.711281] Started bpfilter
[ 24.019664] No iBFT detected.
[ 35.035470] can1-stby: disabling
[ 35.035496] can2-stby: disabling
[ 35.035502] VSD_3V3: disabling
aaeon@localhost:~> lspci -vvv
Absolute path to 'lspci' is '/usr/sbin/lspci', so running it may require superuser privileges (eg. root).
aaeon@localhost:~> sudo lspci -vvv
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for root:
aaeon@localhost:~> lscpu
Architecture: aarch64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: ARM
Model: 4
Model name: Cortex-A53
Stepping: r0p4
BogoMIPS: 16.00
NUMA node0 CPU(s): 0-3
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Not affected
Vulnerability Spec store bypass: Not affected
Vulnerability Spectre v1: Mitigation; __user pointer sanitization
Vulnerability Spectre v2: Not affected
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpui
d
aaeon@localhost:~> lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk2 179:0 0 14.7G 0 disk
├─mmcblk2p1 179:1 0 600M 0 part /boot/efi
├─mmcblk2p2 179:2 0 1G 0 part
└─mmcblk2p3 179:3 0 13.1G 0 part /var
mmcblk2boot0 179:8 0 4M 1 disk
mmcblk2boot1 179:16 0 4M 1 disk
aaeon@localhost:~> dmidecode
Absolute path to 'dmidecode' is '/usr/sbin/dmidecode', so running it may require superuser privileges (eg. root).
aaeon@localhost:~> sudo demidecode
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
7 structures occupying 235 bytes.
Table at 0xBAECD020.
Wrong DMI structures length: 235 bytes announced, only 154 bytes available.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: U-Boot
Version: 2021.04-5.10.35-2.0.0+g79943c815e
Release Date: 08/26/2021
ROM Size: 64 kB
Characteristics:
PCI is supported
BIOS is upgradeable
Selectable boot is supported
I2O boot is supported
Targeted content distribution is supported
BIOS Revision: 21.4
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Not Specified
Product Name: Not Specified
Version: Not Specified
Serial Number: 1c1bb800a5e093fc
UUID: 62316331-3862-3030-6135-653039336663
Wake-up Type: Reserved
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 14 bytes
Base Board Information
Manufacturer: Not Specified
Product Name: Not Specified
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Features:
Board is a hosting board
Location In Chassis: Not Specified
Chassis Handle: 0x0000
Type: Motherboard
Invalid entry length (0). DMI table is broken! Stop.
aaeon@localhost:~> uname -a
Linux localhost 5.14.6-1-default #1 SMP Mon Sep 20 07:02:13 UTC 2021 (6131a3c) aarch64 aarch64 aarch64 GNU/Linux
aaeon@localhost:~> efibootmgr
Absolute path to 'efibootmgr' is '/usr/sbin/efibootmgr', so running it may require superuser privileges (eg. root).
aaeon@localhost:~> sudo efibootmgr
BootOrder: 0000
Boot0000* Fedora
aaeon@localhost:~> sudo tar cfz sys-firmware.tar.gz /sys/firmware
tar: Removing leading `/' from member names
tar: /sys/firmware/efi/fw_platform_size: File shrank by 4093 bytes; padding with zeros
tar: /sys/firmware/efi/systab: File shrank by 4078 bytes; padding with zeros
tar: /sys/firmware/fdt: File shrank by 43636 bytes; padding with zeros
aaeon@localhost:~>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment