AncientJames

#!/usr/bin/env python
import time
import sys
import getpass

from rgbmatrix import RGBMatrix, RGBMatrixOptions
import cv2 as cv

options = RGBMatrixOptions()
options.hardware_mapping = 'regular'

vills

"""
Based on incredible works:
* @mildsunrise (https://gist.github.com/mildsunrise/1d576669b63a260d2cff35fda63ec0b5)
* @elupus (https://github.com/elupus/irgen)
(thank you!)

Script to convert Broadlink base64 encoded remote codes into a format that can be used in Tuya's IR Blasters (ZS06, ZS08, TS1201, UFO-R11).

**Usage:**
    python3 broadlink_to_tuya.py <broadlink_base64_encoded_string>

svyatogor

import io
import base64
import json
import sys
from bisect import bisect
from struct import pack, unpack
from math import ceil

BRDLNK_UNIT = 269 / 8192

mildsunrise

[Tuya][]'s IR blasters, like the [ZS08][], have the ability to both learn and blast generic IR codes. These IR codes are given to the user as an opaque string, like this:

A/IEiwFAAwbJAfIE8gSLIAUBiwFAC+ADAwuLAfIE8gSLAckBRx9AB0ADBskB8gTyBIsgBQGLAUALA4sB8gRAB8ADBfIEiwHJAeARLwHJAeAFAwHyBOC5LwGLAeA97wOLAfIE4RcfBYsB8gTyBEAFAYsB4AcrCYsB8gTyBIsByQHgPY8DyQHyBOAHAwHyBEAX4BVfBIsB8gTJoAMF8gSLAckB4BUvAckB4AEDBfIEiwHJAQ==

Not much is known about the format of these IR code strings, which makes it difficult to use codes obtained through other means (such as a

andrewcchen

/*
Encode an NEC IR command into code for Tuya ZS06/ZS08/TS1201

Usage: encode_nec("<four bytes in hex, two bytes of address followed by two bytes of command>")
If your address and/or command is just one byte (8 bits), append the complement of the byte after it to make it two bytes.

Example:
encode_nec("04fb08f7") // encodes nec address 0x04 and command 0x08

See:

stealth-alex

Copy of deleted topic: https://www.reddit.com/r/gamedev/comments/jumvi5/dualsense_haptics_leds_and_more_hid_output_report/

---

outputReport[0]  = 0x02; // report type

outputReport[1]  = 0xff; // flags determiing what changes this packet will perform
    // 0x01 set the main motors (also requires flag 0x02); setting this by itself will allow rumble to gracefully terminate and then re-enable audio haptics, whereas not setting it will kill the rumble instantly and re-enable audio haptics.
    // 0x02 set the main motors (also requires flag 0x01; without bit 0x01 motors are allowed to time out without re-enabling audio haptics)
    // 0x04 set the right trigger motor

nirizr

def upsert(session, model, rows):
    table = model.__table__
    stmt = postgresql.insert(table)
    primary_keys = [key.name for key in inspect(table).primary_key]
    update_dict = {c.name: c for c in stmt.excluded if not c.primary_key}

    if not update_dict:
        raise ValueError("insert_or_update resulted in an empty update_dict")

    stmt = stmt.on_conflict_do_update(index_elements=primary_keys,

jbsulli

Demo:

Spoiler warning

Spoiler text. Note that it's important to have a space after the summary tag. You should be able to write any markdown you want inside the <details> tag... just make sure you close <details> afterward.

console.log("I'm a code block!");

gboudreau

Exporting your 2FA tokens from Authy to transfer them into another 2FA application

IMPORTANT - Update regarding deprecation of Authy desktop apps

Past August 2024, Authy stopped supported the desktop version of their apps:
See Authy is shutting down its desktop app | The 2FA app Authy will only be available on Android and iOS starting in August for details.

And indeed, after a while, Authy changed something in their backend which now prevents the old desktop app from logging in. If you are already logged in, then you are in luck, and you can follow the instructions below to export your tokens.

If you are not logged in anymore, but can find a backup of the necessary files, then restore those files, and re-install Authy 2.2.3 following the instructions below, and it should work as expected.

kennedy