thingsiplay

#!/bin/sh

# Execute Windows programs with Proton from Steams installation folder, without
# starting Steam client.
#
# 1. Create a directory for Proton environment to run in.  As an example make a
#    folder "proton" in your home directory.  This folder must exist in order
#    to make Proton work.
#
# 2. Point the variable "env_dir" in this script to that folder or...

lxe

Receive GOES-16 and GOES-17 Images with a Raspberry Pi and RTL-SDR dongle

Also see the original Pieter Noordhuis's guide

Hardware

You need:

1. Raspberry Pi Model B (or B+) with a MicroSD Card $35-40
2. An RTL-SDR dongle:

max-lt

location /__special {
  internal;
  allow all;
  root   /usr/share/nginx/html/__special;
}

location = /__md_file {
  internal;
  allow all;

joshgerdes

[profile]
layer_height = 0.16
wall_thickness = 1.2
retraction_enable = True
solid_layer_thickness = 1.2
fill_density = 10
nozzle_size = 0.4
print_speed = 50
print_temperature = 200
print_temperature2 = 0

probonopd

Autodesk Fusion 360 on Linux

In the Web Browser

Ubuntu, Fedora, openSUSE, CentOS, SUSE Linux Enterprise, Debian,... users can finally use Autodesk Fusion 360 in the Linux Browser now.

https://myhub.autodesk360.com

On Chromium 55.0.2843.0 I get NET::ERR_CERTIFICATE_TRANSPARENCY_REQUIRED.

JaminB

"""
    BuzzFactor an algorithm designed to assign an integer value (1-10) to the level of "Buzziness" of a recruiter-provided job description.
    - 1-3: The recruiter took time to draft a job description, and probably spent time looking at your profile.
    - 4-6: The recruiter may have modified a template slightly, and most likely made some effort to correctly match you.
    - 7+: The recuriter litterally copied and pasted the job description into an email and slapped your name on it because "computer" was in your resume
"""

### COPY and PASTE MESSAGE HERE
message = """
    

nooitaf

# dump

# version
# Cleanflight/SPRACINGF3EVO 1.13.0 Jun  6 2016 / 00:03:29 (a77bc76)
# dump master

# mixer
mixer QUADX
mmix reset

ruario

With the release of Vivaldi 2.2, this page is now obsolete and unmaintained. Widevine is fetched automatically on post install of our official packages. The information below and the script are left for historical reasons but will not be updated.

If you are using something newer than Vivaldi 2.2, you should not be using this script as there is simply no need. Any need you think you have for it would be a bug IMHO and thus should be logged in a bug report. Before you do so however, you should also checkout the Vivaldi help page on Widevine, on Linux

---

Summary

A bunch of people asked how they could use this script with pure Chromium on Ubuntu. The following is a quick guide. Though I still suggest you at least try Vivaldi. Who knows, you might like it. Worried about proprietary componants? Remember that libwidevinecdm.so is a b

selfboot

#!/bin/bash

# According to:
# How To Set Up Python 2.7.6 and 3.3.3 on CentOS 6.4
# https://www.digitalocean.com/community/tutorials/how-to-set-up-python-2-7-6-and-3-3-3-on-centos-6-4
yum -y update
yum groupinstall -y 'development tools'
yum install -y zlib-dev openssl-devel sqlite-devel bzip2-devel
yum install xz-libs
wget http://www.python.org/ftp/python/2.7.10/Python-2.7.10.tar.xz

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int