-
-
Save SolveSoul/9be5d9599c8b4b59f7cfa4cd0ce79c9c to your computer and use it in GitHub Desktop.
| [CONST_PARAM] | |
| rtsp = 1 ; RTSPЭ�飬0���ر� 1������ |
| V380 Pro cameras have rtsp/onvif disabled by default. This can be unlocked by inserting an SD-card into the camera. | |
| A step-by-step guide can be found below: | |
| 1) Download the V380 Pro app from the App Store or Google Play | |
| 2) Register or continue without registering | |
| 3) Boot your camera and couple it to the application | |
| 4) Set a custom username and password for your camera | |
| 5) Download the 'ceshi.ini' file and put it on the root of a micro SD card (so not in a subfolder) | |
| 6) Power down the camera, insert the SD card and boot the camera | |
| 7) The camera will talk in chinese, wait for 5 minutes (probably shorter, but to be sure) | |
| 8) Power down the camera, remove the SD card, delete the file and power up the camera | |
| 9) Connect to your camera using the protocol rtsp://username:password@ipaddress:554/live/ch00_0 | |
| 10) DONE | |
| A great way to test is downloading/using VLC and opening a network stream. |
worked like a charm. there was a onvif setting under advanced in the android app to turn on, but otherwise, THANK YOU! I thought I bought a cam that was rtsp ready, and was not happy to find it wasn't, so this is great. for the record, bought the COSULAN Light Bulb Camera, 360 Panoramic Security Camera, on amazon.
do that camera allows listening the audio through it?
You might have to enable it through sd card method, the audio for me does not work. Only through the app
https://www.printables.com/model/167948-v380-snapfit-camera-mount-for-creality-ender-5-plu
this is the old version of this model, the new one has the card slot under the lens and not on the side. The new model also (probably) has new hardware/firmware! And that's almost certainly why the ceshi file doesn't workYes, I bought one off TEMU and can't use VLC or iSpy - sucks!
Not only for you. I can't use VLC or any other programs no sound and no picture but onvif works:(
@C-Fu I also have a QC2, is this correct? If yes how to access it?
[CONST_PARAM] rtsp_enable = 1
Did you manage to get it to work?
No spaces btw. So it should be rtsp_enable=1 and not rtsp_enable = 1
It shouldn't matter, but try it anyway
I've tried several files and methods, but haven't gotten a satisfactory result. Has anyone found anything additional? I'm sharing my firmware version.
Я поговорил с другим техником v380 (вероятно, старшим техником), и он упомянул, что только двойные камеры v380 (заметно на уличных моделях) имеют onvif и rtsp. Поэтому я решил купить двойную камеру v380, и у нее действительно есть onvif и rtsp. Но недостатком является то, что обе камеры накладываются друг на друга и объединяются в один поток (1920 x 2160), а наш NVR, к сожалению, не поддерживает это разрешение.
Я все еще ищу способы разделить каждую камеру на отдельные потоки 1080p.
Anyone know if there is a workaround for audio to be stream in rtsp?
camera I have (but with yellow plastic)
I have the same camera, my cheshi.ini has
rtsp=1
I managed to view the rtsp stream from the url in the guide but there is no audio in the stream
anyone managed to see flags for "Humanoid detection"
i don't need the picture ... i just need to read "or receive events" when humanoid is detected
any guides where to start digging?
You guys know a way to disable timestamp on v380 cameras?
anyone figured how to set password for rtsp?
I got mine working with a different ceshi.ini contents:
[CONST_PARAM]
rtsp_enable = 1
#MineToo!
I got mine working with a different ceshi.ini contents:
[CONST_PARAM]
rtsp_enable = 1
this worked for me ty!
My camera HYE-E692D can be used in the v380 pro app but i cant connect with ODM and milestone XProtect surveilance software.
I tried everything, the ODM shows as this:
I can acess it via VLC and PotPlayer:
but i cant get signal from ODM app.
i can load the device in Milestone using legacy driver but i get no signal just like in ODM.
tried password, http, rtsp, port change, firewall off, port fowarding, ceshi.ini, etc.
in the v380 pro app, the onvif configuration is the only thing that appears, but it wont have any effects, i dont have encoding settings as usual, im ready to junk this garbage out.
Cant even understand how can i have a password from the camera sticker itself and set another one on the app, neither of them seems to do anything.
I bought a three-lens camera, model MOC-Z23G-W, which works with the V380PRO app. I can’t get ONVIF/RTSP to work. When I use ceshi.ini, the camera responds in Chinese (as expected), but after reboot no new settings show up. I’ve tried all the parameters that worked for me on other cameras, but no luck here. Telnet also doesn’t activate.
Has anyone run into this before?
Photo of the camera:
camera I have (but with yellow plastic)