Skip to content

Instantly share code, notes, and snippets.

@Spafbi

Spafbi/ServerInstallInstructions.md

Forked from csprance/ServerInstallInstructions.md
Last active September 11, 2021 18:28
Show Gist options
  • Save Spafbi/1a7e47dcb4d1bb8f8aebf822e3d953dd to your computer and use it in GitHub Desktop.
Save Spafbi/1a7e47dcb4d1bb8f8aebf822e3d953dd to your computer and use it in GitHub Desktop.
Download ZIP
Instructions for setting up a Miscreated Self Hosted Server
Raw
ServerInstallInstructions.md

ATTENTION! ATTENTION! ATTENTION!

This page has been kept for reference, but do not try to follow the instructions found here. This document describes the manual steps needed for setting up a Miscreated server. It is highly suggested most users instead use Spafbi's Simplified Miscreated Server Setup script to handle setup, updating, and running of the server.

Self Hosted Servers

During the entire beta phase of Miscreated self hosted servers are NOT officially supported and will mostly likely be changed during each update.

Due to the fact that self hosted server admins can adjust item spawns the Items tab on Amalgamated kiosks is disabled on self hosted servers - the Skins tab remains fully functional.

It's recommended server admins join our community Discord server for help: http://discord.gg/miscreated - Help requests go in the #server-admin-help channel.

START INSTALL INSTRUCTIONS - CUSTOMIZE TO YOUR NEEDS

NOTE: This document describes the manual steps needed for setting up a Miscreated server. It is highly suggested most users instead use Spafbi's Simplified Miscreated Server Setup script to handle setup, updating, and running of the server.

  • From within Steam install the Miscreated Dedicated Server from Library-> Tools -> Miscreated Dedicated Server
  • Once the Dedicated Server is installed navigate to where the server was installed SteamLibrary\steamapps\common\MiscreatedServer\Bin64_dedicated Right Click on the MiscreatedServer.exe select Send To -> Desktop (Create Shortcut)
  • Right click the created desktop shortcut and choose Properties
  • In the Target input append the following options and change them to your needs:
    • +sv_maxplayers 50 +map islands -sv_port 64090 +http_startserver +sv_servername "My Miscreated Server"
    • Make sure to have a space in between the file path and the string above.
  • Click Ok to Apply the Settings
  • Double Click Miscreated Dedicated Server desktop shortcut to launch the server.

NOTE: Any server trying to pretend to be an official server will have the IP address permanently blocked and will be unable to run. NO exceptions.

-- FINISH INSTALL INSTRUCTIONS --

Connecting to your Server

After you've installed the server and have launched the server you can connect to your server.

  • In order to connect to your own local server right click Miscreated from your Games Library and Click Create Desktop Shortcut
  • Right Click on the new Desktop Shortcut and in the URL input replace it with the follow (Changing your IP as needed)
  • steam://rungameid/299740/connect +connect localhost
  • Launch the game through the new shortcut and you will be automatically connected to the server when it is running.

Performance Concerns

The Miscreated server can currently use up to 4GB of ram when the game is fully loaded (a lot of information gets dynamically loaded as the server runs). An additional 30MB of RAM will be used for each concurrent player. On a fully loaded 50 player server expect the server to use up to around 6GB of RAM. Servers are forced to restart every 24 hours. Use the value "schedule_shutdown_utc" mentioned below to set an exact time each day.

Server Database

All of the data for each server will be saved in a miscreated.db (SQLite) file in the root install folder. It's strongly recommended you do NOT edit the miscreated.db file - you could destroy all persistent data for your server by doing so. It's strongly recommended you backup the miscreated.db file on a regular basis.

Additional command line options

the leading - or + is required

  • -sv_bind x.x.x.x (to specify which interface to use in a multihomed server. If you only have one network card, you do not need to bind an ip)
  • -sv_port x (default is 64090 - the game will use the starting port and the 4 ports after it as well, so default is using ports 64090-64094 - both UDP and TCP are used)
  • -mis_whitelist (add if you want the server to only allow whitelisted steamids to be able to connect to it)
  • +http_startserver (starts the remote console system so admins can issue rcon commands to alter the server while running - see below)

hosting.cfg File

Additional server configuration values can be added to a hosting.cfg file in the root install folder. The use of some of the following options could drastically affect the performance of your server. Do NOT edit the existing system.cfg or dedicated.cfg files, only add and edit to a hosting.cfg file. Replace the X for the commands below with your custom value.

  • sv_servername="X" - The server name that's displayed in the server browser window - this overrides the server name specified in the command line
  • http_password=X - The password used to connect via rcon
  • g_pinglimit=X - Max ping a player can have before being kicked (0=disabled), default: 1000
  • g_pingLimitTimer=X - Time in seconds after which a player will be kicked if they are over the specified ping limit, default: 15
  • g_gameRules_Camera=X - Server enforced camera rules, 0=both, 1=first person only, 2=third person only in vehicle
  • wm_disable=X - Completely disable the weather management system
  • wm_timeScale=X - Scale time of day speed, default: 1
  • wm_timeScaleWeather=X - Scale of weather speed, default: 1
  • wm_timeScaleNight=X - Scale of night speed (relative to day), default: 4
  • wm_timeOffset=X - Time offset to system time, negative = random offset, use 24-x for real negative offsets (as positive numbers), default: 0
  • wm_forceTime=X - Force the server time to a specific 24-hour time, default: -1 (disabled), can be from 0.0 through 24.0
  • sv_noBannedAccounts=X - Don't allow any banned steam accounts to join (or those with a private profile), default: 0
  • sv_maxuptime=X - Maximum server uptime until restart in hours, default: 24 (whitelisted), 12 otherwise - cannot exceed 24 hours
  • schedule_shutdown_utc X - Hard shutdown of the game at the specified UTC hour, can have multiples of these in the hosting.cfg file if wanted
  • sv_motd="X" - Server motd to display when players join the server
  • sv_url="X" - Server url to display when players join the server - just a second motd line really
  • sv_msg_conn=X - Announce connections in chat (whitelisted feature only), default: 0
  • sv_msg_death=X - Announce deaths in chat (whitelisted feature only), default: 0
  • g_gameRules_bases=X - Server enforced base placement rules, default: 1 (0=no bases, 1=restricted zones, 2=bases everywhere(whitelisted feature only))
  • g_playerHealthRegen=X - Health regeneration speed, default: 0.111
  • g_playerFoodDecay=X - Food decay speed, default: 0.2777
  • g_playerFoodDecaySprinting=X - Food decay speed when sprinting, default: 0.34722
  • g_playerWaterDecay=X - Water decay speed, default: 0.4861
  • g_playerWaterDecaySprinting=X - Water decay speed when sprinting, default: 0.607638
  • g_playerInfiniteStamina=X - Enable infinite stamina, default: 0
  • g_craftingSpeedMultiplier=X - Scalar to accelerate crafting times, default: 1
  • asm_disable=X - Disable the AI spawner manager system, default: 0
  • asm_percent=X - Set the AI spawner location percentage, default: 33 (max is 90) - this helps control the AI spawn density
  • asm_maxMultiplier=X - Set the multiplier for the AI spawner max amount, default: 1 (max 5)
  • asm_hordeCooldown=X - Set the min cooldown on spawning hordes, default (in seconds): 900
  • pcs_maxCorpses=X - Set the maximum number of player corpses, default: 20
  • pcs_maxCorpseTime=X - Set the maximum time before a player corpse will despawn, default (in seconds): 1200
  • steam_inventory_enable=X - Configure the Steam inventory (kiosk system), 1 enabled, 0 disabled

Remote Console (RCON) Access

Rcon allows a server admin to remotely administer a server. The best way to use rcon access is to download and use our tool that's located at: https://github.com/Csprance/misrcon You can also use our web interface at: https://servers.miscreatedgame.com

Useful rcon commands:

  • status - Display the status of all playes and connections
  • wm_startPattern X - Force start a weather pattern (all connected players will be notified - see weather pattern list below)
  • mis_ban_steamid 64BITSTEAMID - Ban Player
  • mis_ban_status - Display the ban list
  • mis_ban_remove 64BITSTEAMID - Remove from ban list
  • mis_kick X 64BITSTEAMID - Kick from server
  • mis_whitelist_add 64BITSTEAMID - Add to whitelist
  • mis_whitelist_remove 64BITSTEAMID - Remove from whitelist
  • mis_whitelist_status X - Display the current whitelist
  • sv_say X - Send a message to all connected players (appears at the top of the screen)
  • sv_chat X - Send a chat message to all connected players (appears in the chat window)
  • do_shutdown X - Do a restart with announcements in x seconds (default: 60 seconds, min: 45 seconds, max: 600 seconds)

Weather Patterns

used with wm_startPattern, the missing values are transitional patterns

  • 1: ClearSky
  • 2: LightRain
  • 3: HeavyRainThunder
  • 4: HeavyStorm
  • 7: TornadoRainThunder
  • 9: LightFog
  • 10: MediumFog
  • 11: HeavyFog
  • 12: TheMist
  • 15: RadStorm
  • 18: NuclearFlashFreeze
  • 21: Snow
  • 24: ClearSkyWindy
  • 25: ClearSkyStormy
  • 26: StormyDistantThunder
  • 27: MediumRain
  • 28: HeavyRain
  • 29: AcidRain
  • 31: Blizzard

There is also an advanced faction system that server admins can use. You can view the details at the bottom of our server help page located here: https://servers.miscreatedgame.com/help

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment