XeroHero

Name: Flash 
Serial: eNrzzU/OLi0odswsqnHLSSzOqDGoca7JKCkpsNLXLy8v1ytJTczVLUotKNFLzs8FAJHYETc=

if anyone wants to thank ETH: 0x527c2aB55b744D6167dc981576318af96ed26676
Thank you!

XeroHero

## Sublime Text 3 Serial key build is 3176

> * Added these lines into  /etc/hosts 

127.0.0.1       www.sublimetext.com
127.0.0.1       license.sublimehq.com

> * Used the license key

----- BEGIN LICENSE -----

XeroHero

Generic makefile example for a C++ project

If you need a small makefile introduction/reference you can take a look at my notes https://www.mauriciopoppe.com/notes/os/bin/make/

Project structure

. project
├── Makefile
├── build

XeroHero

#Mac Network Commands Cheat Sheet

After writing up the presentation for MacSysAdmin in Sweden, I decided to go ahead and throw these into a quick cheat sheet for anyone who’d like to have them all in one place. Good luck out there, and stay salty.

##Get an ip address for en0:

ipconfig getifaddr en0

###Same thing, but setting and echoing a variable:

XeroHero

#!/bin/bash
#
## -------------------------------=[ Info ]=--------------------------------- ##
#
# Generate letsencrypt cert on local server and scp to esxi target.
# Designed and tested on Ubuntu 16.04LTS.
# Assumes you have upnp control over local network. Tested with Ubiquiti USG.
#
# Dependencies:
# miniupnpc (sudo apt install miniupnpc)

XeroHero

#### Step 1 - Get your Pi ready ####

sudo raspi-config #Expand File system and enable SSH
sudo apt-get update
sudo apt-get upgrade

#### Step 2 - Install TVheadend ####

sudo apt-get install dirmngr
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 379CE192D401AB61

XeroHero

# To get file
adb pull <PATH/TO/FILE/ON/DEVICE> #This pulls the file from the device to the directory from which the command is being executed

# To push file
adb push <PATH/TO/FILE> <PATH/TO/DESTINATION>

# To get wifi MAC address
adb shell cat /sys/class/net/wlan0/address

# To get IP Address