bigjosh

/*  Blinks Send/Receive (Test)
 *  
 *  --------------------------------------------------------------------------------------------------
 *  IMPORTANT: To use this code in Arduino's IDE, first move the Move38-Blinks folder
 *  into the right directory i.e. <user home directory>/Documents/Arduino/hardware/Move38-Blinks
 *  Then open the Arduino IDE and select Tools > Board > "Move38-Blinks"
 *  Now you should be good to go :) (thanks to the hard work of Josh Levine – josh.com)
 *  -------------------------------------------------------------------------------------------------- 
 *     
 *  by Jonathan Bobrow

bigjosh

/*
 * Color By Number/Neigbor
 * 
 * An example showing how to use the blinkstate library. 
 * 
 * Each Blink broadcasts 1 to its neighbors, letting its neigbors know it's present.
 * Each Blink displays a color based on the number of neighbors around it.
 * 
 */

bigjosh

/*
 * Speed up the rotation of LEDs lights or slow down based on button press
 */

#include "blinklib.h"
#include "Serial.h"

ServicePortSerial Serial;

#define MS_PER_S (1000)

bigjosh

/*
 *  Take on the color of the dominant Blink attached
 */

byte myState = 0;
Color colors[] = { BLUE, RED, YELLOW, ORANGE, GREEN};
const byte myState_count = COUNT_OF (colors);

bool errorFlag[ FACE_COUNT ];

bigjosh

/*
   Blinks Dev-Kit
   Validation Test for Dev Kit Blinks

   4 modes for testing
   1. Verify RGB on all 6 faces together
   2. Verify RGB on each of the 6 faces individually
   3. Verify communication w/ awake neighbors
   4. Verify cold sleep (<0.2µA)