Getting NordVPN WireGuard details

GetNordVPNWireGuardDetails.md

About

Instructions to obtain WireGuard details of your NordVPN account. These can be used to setup a WireGuard tunnel on your router to NordVPN.

Source: https://forum.gl-inet.com/t/configure-wireguard-client-to-connect-to-nordvpn-servers/10422/27

Prerequisites

If you have any linux machine, use that or install a vm if you don't have one.

Get their official linux app installed. Make sure you have wireguard installed too. And set the used technology to Nordlynx by running nordvpn set technology nordlynx

Fetching details

Connect to nordvpn with command: nordvpn connect (don't forget to login with nordvpn login --legacy).

Fetch (your) IP address

After successful connection run

ifconfig nordlynx

Fetch your private key

Run

sudo wg show nordlynx private-key

Output of this command should be something like this:

CKMAE9LARlt2eZHgGnNaSUYiKllKJN7f3hed/bWm5E8=

The key above is just a random key for demo purposes.

Fetch your public key

Run

sudo wg show nordlynx public-key

Output of this command should be something like this:

TO158iXbNXt2eZHgGnNaSUYiKZHgGN7f3hed/bWm5E8=

The key above is just a random key for demo purposes.

Fetch server details

Make sure you have curl and jq installed on your host/router. These are needed to be able to fetch the config of NordVPN Server. If not installed, go ahead and install

opkg install curl jq

After installation enter the command below to fetch the recommended server config:

curl -s "https://api.nordvpn.com/v1/servers/recommendations?&filters\[servers_technologies\]\[identifier\]=wireguard_udp&limit=1"|jq -r '.[]|.hostname, .station, (.locations|.[]|.country|.city.name), (.locations|.[]|.country|.name), (.technologies|.[].metadata|.[].value), .load'

Output:

uk1818.nordvpn.com #your endpoint host
178.239.166.185 #its ip address
London #city
United Kingdom #country
K53l2wOIHU3262sX5N/5kAvCvt4r55lNui30EbvaDlE= #Server public key
10 #Server load at the time.

Or just visit the following url https://api.nordvpn.com/v1/servers/recommendations?&filters\[servers_technologies\]\[identifier\]=wireguard_udp&limit=1 from your browser and look for the details manually.

u could checkout my second web version for this project tryed to make it as easy as possible to get your configs u could find it at
https://nord-configs.onrender.com/

Another way of getting the NordVPN server details you want (steps after installation of curl and jq):

1. Use the NordVPN site ([https://nordvpn.com/servers/tools/]) to get the hostname of a server you desire. Feel free to use the server preferences on the right and/or advanced options
2. Copy the hostname of the desired server (this will be in the format of e.g. "us8261.nordvpn.com")
3. In the terminal type in the following, replace the ##HOSTNAME## with the above hostname:
   curl --silent "https://api.nordvpn.com/v1/servers?limit=16384" | jq --raw-output '.[] | select(.hostname == "##HOSTNAME##") | "\nServer: \(.name)\nHostname: \(.hostname)\nIP Address: \(.station)\nLocation: \(.locations.[].country.name) - \(.locations.[].country.city.name)\nType: \(.technologies.[].name)\nPubKey: \(.technologies.[].metadata.[].value)\nLoad: \(.load)\nStatus: \(.status)\n"'
4. Wait for a moment and the terminal will print out the required details for your desired host, e.g.:
   Server: United States #8261
Hostname: us8261.nordvpn.com
IP Address: 212.102.47.74
Location: United States - Seattle
Type: Wireguard
Public Key: 1GaNB9RbeGNzekcuRDcxTXvqtXWFe2K9GtUd+EjNuyI=
Load: 21
Status: online

Hello, what could be wrong if I got "jq: 1 compile error" ?

For my people under windows that don't have curl and jq, I have converted it to powershell:
https://gist.github.com/2-click/d3267354648bd6175db78ef171472e1d