-
-
Save bouroo/8b34daf5b7deed57ea54819ff7aeef6e to your computer and use it in GitHub Desktop.
| #!/usr/bin/env python | |
| # Kawin Viriyaprasopsook<[email protected]> | |
| # 2023-10-19 | |
| # sudo apt-get -y install pcscd python-pyscard python-pil | |
| import binascii | |
| import os | |
| import sys | |
| from PIL import Image | |
| from smartcard.System import readers | |
| from smartcard.util import toHexString, HexListToBinString | |
| # Thailand ID Smartcard | |
| # tis-620 to utf-8 | |
| def thai2unicode(data): | |
| if isinstance(data, list): | |
| return bytes(data).decode('tis-620').replace('#', ' ').strip() | |
| else: | |
| return data | |
| def get_data(cmd, req=[0x00, 0xc0, 0x00, 0x00]): | |
| data, sw1, sw2 = connection.transmit(cmd) | |
| data, sw1, sw2 = connection.transmit(req + [cmd[-1]]) | |
| return [data, sw1, sw2] | |
| # Define the APDUs used in this script | |
| # https://github.com/chakphanu/ThaiNationalIDCard/blob/master/APDU.md | |
| # Check card | |
| SELECT = [0x00, 0xA4, 0x04, 0x00, 0x08] | |
| THAI_CARD = [0xA0, 0x00, 0x00, 0x00, 0x54, 0x48, 0x00, 0x01] | |
| # CID | |
| CMD_CID = [0x80, 0xb0, 0x00, 0x04, 0x02, 0x00, 0x0d] | |
| # TH Fullname | |
| CMD_THFULLNAME = [0x80, 0xb0, 0x00, 0x11, 0x02, 0x00, 0x64] | |
| # EN Fullname | |
| CMD_ENFULLNAME = [0x80, 0xb0, 0x00, 0x75, 0x02, 0x00, 0x64] | |
| # Date of birth | |
| CMD_BIRTH = [0x80, 0xb0, 0x00, 0xD9, 0x02, 0x00, 0x08] | |
| # Gender | |
| CMD_GENDER = [0x80, 0xb0, 0x00, 0xE1, 0x02, 0x00, 0x01] | |
| # Card Issuer | |
| CMD_ISSUER = [0x80, 0xb0, 0x00, 0xF6, 0x02, 0x00, 0x64] | |
| # Issue Date | |
| CMD_ISSUE = [0x80, 0xb0, 0x01, 0x67, 0x02, 0x00, 0x08] | |
| # Expire Date | |
| CMD_EXPIRE = [0x80, 0xb0, 0x01, 0x6F, 0x02, 0x00, 0x08] | |
| # Address | |
| CMD_ADDRESS = [0x80, 0xb0, 0x15, 0x79, 0x02, 0x00, 0x64] | |
| # Define photo commands | |
| CMD_PHOTO = [0x80, 0xb0, 0x00, 0x78, 0x02, 0x00, 0xFF] | |
| # Get all the available readers | |
| readerList = readers() | |
| print("Available readers:") | |
| for readerIndex, readerItem in enumerate(readerList): | |
| print(readerIndex, readerItem) | |
| # Select reader | |
| readerSelectIndex = int(input("Select reader[0]: ") or "0") | |
| reader = readerList[readerSelectIndex] | |
| print("Using:", reader) | |
| connection = reader.createConnection() | |
| connection.connect() | |
| atr = connection.getATR() | |
| print("ATR:", toHexString(atr)) | |
| req = [0x00, 0xc0, 0x00, 0x01] if atr[0] == 0x3B and atr[1] == 0x67 else [0x00, 0xc0, 0x00, 0x00] | |
| # Check card | |
| data, sw1, sw2 = connection.transmit(SELECT + THAI_CARD) | |
| print(f"Select Applet: {sw1:02X} {sw2:02X}") | |
| # CID | |
| data = get_data(CMD_CID, req) | |
| cid = thai2unicode(data[0]) | |
| print("CID:", cid) | |
| # TH Fullname | |
| data = get_data(CMD_THFULLNAME, req) | |
| print("TH Fullname:", thai2unicode(data[0]) | |
| # EN Fullname | |
| data = get_data(CMD_ENFULLNAME, req) | |
| print("EN Fullname:", thai2unicode(data[0]) | |
| # Date of birth | |
| data = get_data(CMD_BIRTH, req) | |
| print("Date of birth:", thai2unicode(data[0]) | |
| # Gender | |
| data = get_data(CMD_GENDER, req) | |
| print("Gender:", thai2unicode(data[0]) | |
| # Card Issuer | |
| data = get_data(CMD_ISSUER, req) | |
| print("Card Issuer:", thai2unicode(data[0]) | |
| # Issue Date | |
| data = get_data(CMD_ISSUE, req) | |
| print("Issue Date:", thai2unicode(data[0]) | |
| # Expire Date | |
| data = get_data(CMD_EXPIRE, req) | |
| print("Expire Date:", thai2unicode(data[0]) | |
| # Address | |
| data = get_data(CMD_ADDRESS, req) | |
| print("Address:", thai2unicode(data[0]) | |
| # PHOTO | |
| photo_data = b'' | |
| for i in range(1, 21): | |
| cmd_photo = CMD_PHOTO[:] | |
| cmd_photo[4] = i | |
| photo_data += get_data(cmd_photo, req)[0] | |
| with open(f"{cid}.jpg", "wb") as f: | |
| f.write(photo_data) | |
| # Exit program | |
| sys.exit() |
รบกวนสอบถามหน่อยครับ
i have problem about select photo from thai national card by use python3.6 language. My code is below.
Photo=[]
#PhotoPhoto_Part1/20
CMD_PHOTO1 = [0x80, 0xb0, 0x01, 0x7B, 0x02, 0x00, 0xFF]
CMD_PHOTOREQ=[0x00, 0xc0, 0x00, 0x00, 0xFF]Photo_Part2/20
CMD_PHOTO2 = [0x80, 0xb0, 0x02, 0x7A, 0x02, 0x00, 0xFF]
Photo_Part3/20
CMD_PHOTO3 = [0x80, 0xb0, 0x03, 0x79, 0x02, 0x00, 0xFF]
Photo_Part4/20
CMD_PHOTO4 = [0x80, 0xb0, 0x04, 0x78, 0x02, 0x00, 0xFF]
Photo_Part5/20
CMD_PHOTO5 = [0x80, 0xb0, 0x05, 0x77, 0x02, 0x00, 0xFF]
Photo_Part6/20
CMD_PHOTO6 = [0x80, 0xb0, 0x06, 0x76, 0x02, 0x00, 0xFF]
Photo_Part7/20
CMD_PHOTO7 = [0x80, 0xb0, 0x07, 0x75, 0x02, 0x00, 0xFF]
Photo_Part8/20
CMD_PHOTO8 = [0x80, 0xb0, 0x08, 0x74, 0x02, 0x00, 0xFF]
Photo_Part9/20
CMD_PHOTO9 = [0x80, 0xb0, 0x09, 0x73, 0x02, 0x00, 0xFF]
Photo_Part10/20
CMD_PHOTO10 = [0x80, 0xb0, 0x0A, 0x72, 0x02, 0x00, 0xFF]
Photo_Part11/20
CMD_PHOTO11 = [0x80, 0xb0, 0x0B, 0x71, 0x02, 0x00, 0xFF]
Photo_Part12/20
CMD_PHOTO12 = [0x80, 0xb0, 0x0C, 0x70, 0x02, 0x00, 0xFF]
Photo_Part13/20
CMD_PHOTO13 = [0x80, 0xb0, 0x0D, 0x6F, 0x02, 0x00, 0xFF]
Photo_Part14/20
CMD_PHOTO14 = [0x80, 0xb0, 0x0E, 0x6E, 0x02, 0x00, 0xFF]
Photo_Part15/20
CMD_PHOTO15 = [0x80, 0xb0, 0x0F, 0x6D, 0x02, 0x00, 0xFF]
Photo_Part16/20
CMD_PHOTO16 = [0x80, 0xb0, 0x10, 0x6C, 0x02, 0x00, 0xFF]
Photo_Part17/20
CMD_PHOTO17 = [0x80, 0xb0, 0x11, 0x6B, 0x02, 0x00, 0xFF]
Photo_Part18/20
CMD_PHOTO18 = [0x80, 0xb0, 0x12, 0x6A, 0x02, 0x00, 0xFF]
Photo_Part19/20
CMD_PHOTO19 = [0x80, 0xb0, 0x13, 0x69, 0x02, 0x00, 0xFF]
Photo_Part20/20
CMD_PHOTO20 = [0x80, 0xb0, 0x14, 0x68, 0x02, 0x00, 0xFF]
Photo 1
data, sw1, sw2 = connection.transmit(CMD_PHOTO1)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 2
data, sw1, sw2 = connection.transmit(CMD_PHOTO2)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 3
data, sw1, sw2 = connection.transmit(CMD_PHOTO3)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 4
data, sw1, sw2 = connection.transmit(CMD_PHOTO4)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 5
data, sw1, sw2 = connection.transmit(CMD_PHOTO5)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 6
data, sw1, sw2 = connection.transmit(CMD_PHOTO6)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 7
data, sw1, sw2 = connection.transmit(CMD_PHOTO7)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 8
data, sw1, sw2 = connection.transmit(CMD_PHOTO8)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 9
data, sw1, sw2 = connection.transmit(CMD_PHOTO9)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 10
data, sw1, sw2 = connection.transmit(CMD_PHOTO10)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 11
data, sw1, sw2 = connection.transmit(CMD_PHOTO11)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 12
data, sw1, sw2 = connection.transmit(CMD_PHOTO12)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 13
data, sw1, sw2 = connection.transmit(CMD_PHOTO13)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 14
data, sw1, sw2 = connection.transmit(CMD_PHOTO14)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 15
data, sw1, sw2 = connection.transmit(CMD_PHOTO15)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 16
data, sw1, sw2 = connection.transmit(CMD_PHOTO16)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 17
data, sw1, sw2 = connection.transmit(CMD_PHOTO17)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+data
print ("Command14: %02X %02X" % (sw1, sw2))Photo 18
data, sw1, sw2 = connection.transmit(CMD_PHOTO18)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 19
data, sw1, sw2 = connection.transmit(CMD_PHOTO19)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+dataPhoto 20
data, sw1, sw2 = connection.transmit(CMD_PHOTO20)
data, sw1, sw2 = connection.transmit(CMD_PHOTOREQ)
Photo=Photo+data
print(Photo) # Output =[255, 216, 255, 224, 0, 16, 74, 70, 73, 70, 0, 1, 1, 1, 0, 96, 0, 96, 0, 0, 255, 219, 0, 67, 0, 15, 10, 11, 13, 11, 9, 15, 13, 12, 13, 17, 16, 15, 18, 23, 38, 24, 23, 21, 21, 23, 46, 33, 35, 27, 38, 55, 48, 57, 56, 54, 48, 53, 52, 60, 68, 86, 73, 60, 64, 82, 65, 52, 53, 75, 102 ......]
print(str(len(Photo))) # Output=5100
print(type(Photo)) # <class 'list'>
Photo=HexListToBinString(Photo)
print(Photo) #Output = ÿØÿà\000�JFIF\000���\000\000\000\000ÿÛ\000C\000��print(str(len(Photo))) #Output is 5100
f=open("cid.jpg","wb")
f.write(Photo)
f.close
When Program run to command "f.write(Photo)" will have error "builtins.TypeError: a bytes-like object is required, not 'str'"I should fix this error ?
I'm having the same problem with you, how to fix it?
For python3 you can just do the following to get the photo writing correctly
Update the thai2unicode method
def thai2unicode(data):
if isinstance(data, list):
return bytes(data).decode('tis-620').strip().replace('#', ' ')
else :
return dataReplace the line with HexListToBinString with the following
data = bytes(photo)@bouroo Thanks for this, it has been very helpful.
Thanks for your code.
I tried this on python3. it doesn't work on reading profile picture.
I changed some code of you then it works.
My code
https://github.com/pstudiodev1/lab-python3-th-idcard
Thanks
สอบถามหน่อยครับ
ที่ line 21 result += unicode(chr(d),"tis-620")
ลองรันแล้วเจอปัญหานี้อะครับ
NameError: name 'unicode' is not defined
พยายามหาข้อมูลเองเขาบอกให้เปลี่ยนจาก unicode เป็น str เพราะใช้ python version 3
แต่พอลองเปลี่ยนก็เจออีกปัญหาอะครับ
TypeError: decoding str is not supported
มีคำแนะนำมั้ยครับ
ขอบคุณครับ