Skip to content

Instantly share code, notes, and snippets.

@evianzhow
Created September 3, 2017 02:11
Show Gist options
  • Save evianzhow/a401be07593b0fe90f5db338c12b7ed8 to your computer and use it in GitHub Desktop.
Save evianzhow/a401be07593b0fe90f5db338c12b7ed8 to your computer and use it in GitHub Desktop.
HP Smart Array Advanced Pack Evaluation License Key
34T62-N84MB-7DQGY-G7XGT-YTQ63
@moraza
Copy link

moraza commented Oct 23, 2022 via email

@andy-butterworth
Copy link

andy-butterworth commented Oct 23, 2022

Cheers. I appreciate the warning regarding cheap batteries. I got a HP branded replacement; however, I think there are various part numbers, and they all have the same connector and the one I've got isn't suitable for a DL370 G7 P410i. Waiting for the supplied to come back to me as I asked for one that was suitable for a DL380 G7 P410i.

I'm still a bit concerned about the RAID6 functionality after (if?) the license expires. Once the RAID has been configured, it won't change so if the behavior after the license expiring is that changes can't be made then that won't be an issue. However, if the cache will get disabled then that's a bigger issue.

@andy-butterworth
Copy link

andy-butterworth commented Feb 3, 2023

I built a RAID6 volume using 8 x 900GB SAS drives connected to a P410i on a DL380 G7 running ESXi 7.0U3. I used the evaluation license and its now expired. The volume is still functional, however the cache is disabled. This is what the HP SSA utility shows:

`[root@esxi-host-6:~] /opt/smartstorageadmin/ssacli/bin/ssacli ctrl all show detail

Smart Array P410i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: xxxxxxxxxxxxxxxx
Cache Serial Number: xxxxxxxxxxxxx
Controller Status: OK
Hardware Revision: C
Firmware Version: 6.64-0
Firmware Supports Online Firmware Activation: False
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: No
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: Temporarily Disabled
Cache Status Details: Cache disabled; ADG enabler missing.
Cache Disable Reason: Temporary disable condition. The cache has been disabled because a RAID6 volume is configured but the enablement mechanism is broken or missing.
Drive Write Cache: Disabled
Total Cache Size: 0.5
Total Cache Memory Available: 0.4
No-Battery Write Cache: Disabled
Cache Backup Power Source: Capacitors
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Number of Ports: 2 Internal only
Encryption: Not Set
Driver Name: nhpsa
Driver Version: 70.0051.0.100-4vmw
PCI Address (Domain:Bus:Device.Function): 0000:05:00.0
Port Max Phy Rate Limiting Supported: False
Host Serial Number: xxxxxxxxxx
Sanitize Erase Supported: False
Primary Boot Volume: None
Secondary Boot Volume: None
`
It has been rebooted several times, so the RAID6 is still working, just no cache.
Using the ACU on the Proliant Support Pack DVD/USB, you can remove and re-add the evaluation key (you don't seem to be able to remove the key from the P410i BIOS settings (F8 on boot).
I'd therefore really like to put a non-evaluation key in there. Anyone know any sources?

Cheers
Andy

@Tokukarin
Copy link

Tokukarin commented Feb 4, 2023

@andy-butterworth
You can remove the license with this command:
delete /map1 license
But I have no idea what will happen and If you are able to reuse it. (I do not recommend using that command as I have no Idea what will happen! Definitely have a Backup that you can restore!!!)

But all I can say is, your better off with a SSD as cache.
Otherwise go for DELL. I swear to god, so much better. I could even write a script on my hypervisor that turns down the fans at night so that I can sleep in peace. And in the morning the script released the limit for the fans.

Edit:
I think I am able to acquire an unused iLO license key. I will post the key here as soon as I have it but I don't know If you can use it multiple times.

@andy-butterworth
Copy link

Anyone familiar with the HPE 'ssacli' commands and licenses?
The help shows this `root@localhost:~] /opt/smartstorageadmin/ssacli/bin/ssacli help license

The following documentation pertains to your search:

add [licensekey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX]
The add command adds a license key to the specified array controller.The
target can be any valid controller.

delete
The command removes a license key from the specified array controller.The
target can be any valid license key.

Examples:
controller slot=0 add licensekey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
controller slot=0 add lk=XXXXXXXXXXXXXXXXXXXXXXXXX
controller all add lk=XXXXXXXXXXXXXXXXXXXXXXXXX
controller slot=0 licensekey XXXXX-XXXXX-XXXXX-XXXXX-XXXXX delete
controller slot=0 lk XXXXXXXXXXXXXXXXXXXXXXXXX delete
controller slot=0 lk XXXXXXXXXXXXXXXXXXXXXXXXX show
controller slot=0 lk all show`

I can add the license with the command

ssacli ctrl slot=0 add licensekey=34T62-N84MB-7DQGY-G7XGT-YTQ63

however deleting it doesn't work and I get this error

`[root@localhost:~] /opt/smartstorageadmin/ssacli/bin/ssacli ctrl slot=0 lk 34T62-N84MB-7DQGY-G7XGT-YTQ63 delete

Error: The specified device does not have a licensekey identified by
"34T62-N84MB-7DQGY-G7XGT-YTQ63"
`
I've tried using the keyword 'licensekey' and the shortened 'lk' as well as the key with hyphens and without and I get the same error message.

I was hoping to just create a script to remove and re-add the license and run it every few months.

@Tokukarin
Copy link

Tokukarin commented Feb 5, 2023

Here is a license:
36Z2J-8TJG8-M6XH4-6YWKB-WXM36

@andy-butterworth
Copy link

Hi, thanks for this, however it doesn't appear to work.
I have tried adding it during boot (F8) and from the ACU on the Proliant Support Pack .ISO.

@clemclemmm
Copy link

Here is a license:
36Z2J-8TJG8-M6XH4-6YWKB-WXM36
I don't know If you can use it multiple times.
But whoever uses it, you can thank me with Monero here: 44YXzbkYW8X7qeuwKD9iKfSJkKzBwKn42insYuc7H1MwYBFBB9deND72oE2HcB4ELNQsEkDZotLpdekoAQazcN5EVHp3oSR
:D

Doesn't work for me too

@toto93330
Copy link

Doesn't work for me too

@Bas1286
Copy link

Bas1286 commented Oct 3, 2023

HP should honestly release the key so we can use this in lab.

@soder10
Copy link

soder10 commented Feb 19, 2024

HP should honestly release the key so we can use this in lab.

Those greedy motherf.ers at HP wont release the master key for that shitty underperformer p410 not even in 100 yrs. Hell freeze over sooner than HP giving away anything for free. Thousands of unlicensed p410 are working even in 2024 all over the world. HP cannot let it happen to lose any potential $ from any single one of these people. So they wont publish the key, I can guarantee this to all of you. HP is similarly greedy mf company as oracle.

@soder10
Copy link

soder10 commented Feb 19, 2024

Here is a license: 36Z2J-8TJG8-M6XH4-6YWKB-WXM36

That p410 license key is bound to the serial number of your own specific device. Every other p410 has a different serial number, therefore no other card will accept this as a valid license. This works only on your unique card. There are clever motherf.ers working at HP, if its about milking their customers, so dont have high hopes you can find any working license for this shitty p410 card anywhere on the entire internet.

@agilliam80
Copy link

Im running into the same issue with my p440ar. I cant get a license for it through Hp because its a discontinued server. Why not just give us firmware to unlock it to its full potential then? HP is nothing more than greedy ass pieces of trash. I will NEVER buy another HP. I paid cash for this server and still get shit treatment from them. Because I dont have a subscription I was unable to update the firmware for iLO, as well as bios. Thankfully digging into the community, I was able to find not only the iLO firmware, but the BIOS as well. Even further digging I found the SPP (Service Pack for the Gen 9 servers). I have it being seeded on line right now.

In my past I have used Dell Poweredge, and still have my origional Dell Poweredge 1650's (x2) as well as my Dell Poweredge 2650. All 3 run perfectly fine just slow since the age. But I bought them new at the same time I purchased my HP DL380 G4. HP made it impossible for me to get firmwares, by putting them behind a paywall. Why? for the love of god this is BULLCRAP!. Dell has allowed all users to obtain their stuff ree.. I just dont get why a corporation would become so greedy and put everything behind a paywall. This will discourage people from buying more form them in the future. It has me. My DL380 G4 was purchased new, never had issues and never even updated the firmware. Id like to update the firmware too the latest available but all behind paywall.

Youd sure would think that they would be more grateful that we are keeping their products out of the landfill, and using their product. Honestly its a solid server. The G9, and even the G4. But holy hell, they are way out of service date, just release the shit already!

@mrtajniak
Copy link

Doesn’t work on HP Smart Array P420i

@DonZalmrol
Copy link

Seems you can purchase a (currently cheap due to promotion) license from this site, though can't order it (yet) as I'm located outside of NZ.
https://acquire.co.nz/p/hpe/software-licensing/other-software/hpe-smartcache-no-media-24x7-technical-support-1-svr-license-d7s26a-76953/

I've sent them an email for more information.

@mrtajniak
Copy link

I would rather find the license or solution to get the license for free, I don’t want to buy a license for home lab, I am totally in for paying for the license for enterprise environment but for polish home lab it’s pretty expensive thing, for the cost of Smart Array license I can get a pretty good phone

@DonZalmrol
Copy link

DonZalmrol commented Mar 10, 2024

Uhm the license is currently in promotion and costs with GST (VAT) about 30NZD (~17EUR). So I don't think you'll be able to purchase much phone for it 😄 I'm also searching for a cheap (or free) license for my homelab.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment