Vlad faust93

Обращение к российским IT-специалистам

Коллеги! Армия Путина вторглась в Украину под предлогом «денацификации» и ведёт там грязную войну. У многих из нас есть коллеги из Украины, с которыми можно пообщаться и убедиться в том, что никакого «освобождения» от Путина им не нужно.

Многим из нас сейчас страшно. Но открытое письмо нашей индустрии против этой войны собрало уже более 30 000 подписей. Нас много, и мы уверены, что это не предел.

Правительству тоже страшно: страшно потерять нас. А значит, действия каждого из нас могут помочь прекратить это безумие.

Что делать

Linux Desktop on Apple Silicon in Practice

I bought M1 MacBook Air. It is the fastest computer I have, and I have been a GNOME/GNU/Linux user for long time. It is obvious conclusion that I need practical Linux desktop environment on Apple Silicon.

Fortunately, Linux already works on Apple Silicon/M1. But how practical is it?

Two native ports exist.

Docker on Android 🐋📱

Edit 🎉

All packages, except for Tini have been added to termux-root. To install them, simply pkg install root-repo && pkg install docker. This will install the whole docker suite, left only Tini to be compiled manually.

Summary

Flashing an unbranded smart lightbulb to Tasmota

Whilst on holiday last week I thought i would do something productive but that seemed like work so I bought some cheap noname wi-fi smart LED lighbulbs off ebay and flashed them with Tasmota firmware, since the particular bulb I bought wasnt listed on the Tasmota Device Templates Repository and I have no idea if they accept an entry for a bulb with no identifying marks I thought i'd put something here incase its of use to anyone.

Reliability: I have at this point had 10 of these bulbs running for about a week, one of them has just died.

TL;DR

The pinout and device string for this light:

GPIO4 Cold White PWM 4

	#!/bin/bash

	# SS_EEPROM (Chip Select) Pin 2
	# 3.3v -
	# MISO (CIPO) Pin 0
	# SCK (SCK) Pin 3
	# GND -
	# MOSI (COPI) Pin 1

	set -x

	#!/usr/bin/env python3

	# ref: https://stackoverflow.com/questions/2804543/read-subprocess-stdout-line-by-line#2813530

	import io
	import os
	import subprocess
	import sys

	from pygments import highlight

	# ref https://zenn.dev/syoyo/articles/9a159ee747835a

	import sys

	from transformers import AutoModelForSeq2SeqLM, AutoTokenizer

	max_length = 512

	# ref https://huggingface.co/facebook/nllb-200-distilled-1.3B
	# The model was trained with input lengths not exceeding 512 tokens, therefore translating longer sequences might result in quality degradation.

	# This example uses M2M-100 models converted to the CTranslate2 format.
	# Download CTranslate2 models:
	# • M2M-100 418M-parameter model: https://bit.ly/33fM1AO
	# • M2M-100 1.2B-parameter model: https://bit.ly/3GYiaed


	import ctranslate2
	import sentencepiece as spm

	/*

	Utility to dump and restore a 24c256 eeprom.
	(Changing the defines it will work with other eeproms too.)

	Remember that 24c256 has 16 bit addressing.
	Smaller ones have 8 bit addressing.

	By Zibri.

	apiVersion: v1
	kind: Secret
	metadata:
	name: ceph-admin-secret
	namespace: kube-system
	type: "kubernetes.io/rbd"
	data:
	# ceph auth get-key client.admin \| base64
	key: <your output from above>