reagames

###########################################################################
# 
#

# This is a program to read thermal image data from the Seek PIR206 Thermal Camera
# This program is intended to be used with Raspberry Pi
# Pygame allows to output directly to framebuffer. 
# Here I use small TFT display connected to GPIO and sending data to framebuffer fb1 for output to this display.
# I also use three simple GPIO buttons to have realtime control for image processing parameters
# This comes particularly useful e.g. when you use Seek at low temperature (you will need to lower down "lower threshold limit"

quelleck

#!/bin/sh

# Enable and disable HDMI output on the Raspberry Pi

is_off ()
{
	vcgencmd display_power | grep "display_power=0" >/dev/null
}

case $1 in

RamonGilabert

#!/usr/bin/expect -f

set prompt "#"
set address [lindex $argv 0]

spawn sudo bluetoothctl -a
expect -re $prompt
send "remove $address\r"
sleep 1
expect -re $prompt

AGWA

#!/bin/sh

# Enable and disable HDMI output on the Raspberry Pi

is_off ()
{
	tvservice -s | grep "TV is off" >/dev/null
}

case $1 in