Commands for managing a tk-start tk915 GPS tracker

tkstar-tk915.adoc

TKSTAR-TK915 SMS Commands

Nota

• <space> means space character

• <phone number> like 00330612345678 (prefer international format)

Table 1. Admin commands

Description	Command	Response	Comment
Change password	password<current password><space><new password>	password ok
Enable admin phone number	admin<password><space><phone number>	admin ok	Up to 5 phone numbers.
Disable admin phone number admin	noadmin<password><space><phone number>	noadmin ok

Table 2. Configuration commands

Description	Command	Response	Comment
Reset hardware	begin<password>	begin ok
Check the device	check<password>	device informations
Timezone setting	timezone<password><space><timezone>	time ok	ex: timezone123456 +2

Table 3. Network commands

Description	Command	Response	Comment
Enable GPRS	gprs<password>	gprs ok
Disable GPRS	nogprs<password>	nogprs ok
Set APN	apn<password><space><APN name>	apn ok
Set APN user	apnuser<password> <APN username>	apnuser ok
Set APN password	apnpassword<password> <APN password>	apnpassword ok

Table 4. Alarm commands

Get position	g<password>#	location informations
Enable shock detection	shock<password>	shock ok
Disable shock detection	noshock<password>	noshock ok
Sleep after 10min	sleep<password><space><time>	sleep time ok
Sleep by shock after 5min	sleep<password><space>shock	sleep shock ok
Disable sleep mode	sleep<password><space>off	sleep off ok
Enable alarm when move	move<password><space><distance in meter>	move ok	ex: move123456 500 (over 500m)
Disable alam when move	nomove<password>	nomove ok
Enable over-speed alarm	speed<password><space>080	speed ok	ex: speed123456 080 (over 80km/h)
Disable over-speed alarm	nospeed<password>	nospeed ok
Enable Auto location	t<time w/ 3 digits><time unit s/m/h><occurs w/ 3 digits>n<password>	location informations	ex: * t030s005n123456 send location every 30s, 5 times. * t001h001n123456 send location every hour, 1 time. * t005m**n123456 send position every 5min *time: from 20sec / cycle between 000 and 255.
Disable Auto location	notn<password>	notn ok

Hi I have two tk918's I am trying to add them on one email account to use on mytkstar or winnes. When I try to add one of them that works fine. If I then try to add the second one it says "no permission" I've tried RESET123456 on it but to no avail. I can log in to both separately fine using the login by ID. Just not log in by username with my account email. I've tried the winnes app and mytkstar app. Any ideas? Kind regards Jason.

Hello,
I have a problem with all my devices, specifically with the battery. My battery is 10,000 mAh, but it can't last more than a week! Why?

What are the device settings?On May 23, 2024, at 8:04 AM, Sultan1118 ***@***.***> wrote:Re: ***@***.*** commented on this gist.Hello,I have a problem with all my devices, specifically with the battery. My battery is 10,000 mAh, but it can't last more than a week! Why?—Reply to this email directly, view it on GitHub or unsubscribe.You are receiving this email because you commented on the thread.Triage notifications on the go with GitHub Mobile for iOS or Android.                                                           

I am using the Tk913 GPS tracker. My problem is when the device start to move after long stay, it’s take too long to be showed in applications and that makes it difficult to followed. Also If it’s possible I need to set the device in such way when stops moving to go (OFFLINE). And to wake up by shock’’, and going (ONLINE) when it’s starts to move again’’ to saving battery. Because as default it’s always “ONLINE” and consumes a lot of battery! I send sms command (Sleep123456 shock) thru the mytkstar platform. On the check command section I get the following:

Hi..does the rconf works on the tk915? Just want to see all settings?
And can someone explain the autolocation to me? Hoe do I set it up and what does it do. Thanks

Use CHECK command not RCONF

…

On Jul 1, 2024, at 2:02 AM, Ducatinus ***@***.***> wrote: @Ducatinus commented on this gist. Hi..does the rconf works on the tk915? Just want to see all settings? And can someone explain the autolocation to me? Hoe do I set it up and what does it do. Thanks — Reply to this email directly, view it on GitHub <https://gist.github.com/gmarfjan/e088d839d996effe71e5d99af93a873b#gistcomment-5107118> or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASYK2GIQZDR57D7OCGQ5PFDZKDWHZBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDUOJ2WLJDOMFWWLO3UNBZGKYLEL5YGC4TUNFRWS4DBNZ2F6YLDORUXM2LUPGBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTAMZUGQ4DQNZRU52HE2LHM5SXFJTDOJSWC5DF>. You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

Use CHECK command not RCONF
…
On Jul 1, 2024, at 2:02 AM, Ducatinus @.***> wrote: @Ducatinus commented on this gist. Hi..does the rconf works on the tk915? Just want to see all settings? And can someone explain the autolocation to me? Hoe do I set it up and what does it do. Thanks — Reply to this email directly, view it on GitHub https://gist.github.com/gmarfjan/e088d839d996effe71e5d99af93a873b#gistcomment-5107118 or unsubscribe https://github.com/notifications/unsubscribe-auth/ASYK2GIQZDR57D7OCGQ5PFDZKDWHZBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDUOJ2WLJDOMFWWLO3UNBZGKYLEL5YGC4TUNFRWS4DBNZ2F6YLDORUXM2LUPGBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTAMZUGQ4DQNZRU52HE2LHM5SXFJTDOJSWC5DF. You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

Thanks. No possibility to get info like this?

t<time w/ 3 digits><time unit s/m/h><occurs w/ 3 digits>n

Can someone explain this to me and what does it do? How should the command look like?

I lost my password, can somebody tell me what to do

Hi, I have a tk405 4g, and I can't get the adminip command to work. The tkstar website gives me an error and it doesn't respond to me via SMS. When I check with the check****** command, the default configuration appears. Does anyone know what could be happening? Do I need any extra configuration or do I need to disable something for the adminip command to work?
Thanks a lot.

@carlosbarahona Did you try to include your current password in the command?
Something like adminip123456 {your_public_ip} {port}